Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shells”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

The vibrations of a cylindrical shell in a flowing acoustic media

A mathematical model is presented for the effect of flow on the vibrations of a thin cylindrical shell in a subsonically-flowing acoustic media. The effect of the external acoustic fluid consists of a mass-like term caused by the 'virtual-mass' effect of the fluid and a 'damping-like' term which accounts for the radiation of energy away from the cylinder. For a flowing medium, both of these terms are shown to involve the flow velocity. The effect of flow on the cylinder resonances is examined numerically. While not all modes are affected by the flow, there are some modes which are significantly affected. Usually, the added mass of the fluid increases with flow velocity causing a reduction in the resonant frequency of the shell mode.

Koval, L. R.↗
NASA NTRS1978

Effect of longitudinal stringers on sound transmission into a thin cylindrical shell

In the context of the transmission of airborne noise into an aircraft fuselage, a mathematical model is presented for the transmission of airborne noise into a stiffened cylindrical shell. The stiffeners are longitudinal stringers and are modeled as discrete structural elements. The numerical cases examined were typical of a narrow-bodied jet transport fuselage. The stringers appeared to raise the cylinder transmission loss in the mass-controlled region, although they produced dips at the stringer resonances. The ring-frequency dip in transmission loss, which is characteristic of monocoque shells, was found to still be present. There appeared to be a small increase in transmission loss as the number of stringers was increased. The effect of high damping was also investigated.

Koval, L. R.↗
NASA NTRS1979

On sound transmission into an orthotropic shell

A mathematical model is presented for the transmission of airborne noise through the walls of an orthotropic cylindrical shell. Parameters were varied to see how orthotropicity affected noise transmission. When compared to that for an isotropic shell, the cylinder transmission loss was found to be quite sensitive to the ratio of circumferential to axial modulus of elasticity. A modulus ratio greater than unity appears to enhance transmission loss in the mass-controlled region, while a ratio less than unity degrades it. Below the ring frequency, the trends appear to be reversed. The cylinder transmission loss appears to be relatively insensitive to changes in the shear modulus

Koval, L. R.↗
NASA NTRS1978

Simulation of the stress computation in shells

A self-teaching computer program is described, whereby the stresses in thin shells can be computed with good accuracy using the best fit approach. The program is designed for use in interactive game mode to allow the structural engineer to learn about (1) the major sources of difficulties and associated errors in the computation of stresses in thin shells, (2) possible ways to reduce the errors, and (3) trade-off between computational cost and accuracy. Included are derivation of the computational approach, program description, and several examples illustrating the program usage.

Salama, M.↗
NASA NTRS1980

Glass shell manufacturing in space

A heat transfer model was developed that mathematically describes the heating and calculates the thermal history of a gel particle in free-fall through the furnace. The model parameters that greatly affect the calculations were found to be gel particle mass, geometry, specific heat, and furnace gas. Empirical testing of the model has commenced. The code calculations and the initial empirical testing results both indicate that the gel-to-shell transformation occurs early and rapidly in the thermal history of the gel particle, and that for current work the heat transfer rate is not a limitation in shell production.

Nolen, R. L., Jr.↗
NASA NTRS1979

Transverse shear effect in a circumferentially cracked cylindrical shell

The objectives of the paper are to solve the problem of a circumferentially-cracked cylindrical shell by taking into account the effect of transverse shear, and to obtain the stress intensity factors for the bending moment as well as the membrane force as the external load. The formulation of the problem is given for a specially orthotropic material within the framework of a linearized shallow shell theory. The particular theory used permits the consideration of all five boundary conditions as to moment and stress resultants on the crack surface. The effect of Poisson's ratio on the stress intensity factors and the nature of the out-of-plane displacement along the edges of the crack, i.e., bulging, are also studied.

Delale, F.↗
NASA NTRS1980

Relativistic K-shell Auger rates, level widths, and fluorescence yields

Systematic relativistic (Dirac-Hartree-Slater) calculations of atomic K-shell Auger transition probabilities are reported for 25 elements with Z between 18 and 96, inclusive. K-level Auger widths are found to be enhanced by relativistic effects, while total K-level widths are reduced. Relativistic theoretical K-shell fluorescence yields are in excellent agreement with experiment. Theoretical relative intensities of K-LX Auger transitions in heavy elements, calculated in j-j coupling, agree well with measurements; for low Z, configuration interaction and intermediate coupling must apparently be included.

Chen, M. H.↗
NASA NTRS1980

A consistent set of trial functions for conical shells

A consistent approach is developed for the determination of trial functions for a class of shells of revolution. The trial functions satisfy the in-plane and out-of-plane boundary conditions at the shell ends and include the effects of tangential inertia. The resulting expressions converge rapidly for the problem of linear free vibration

El-Raheb, M.↗
NASA NTRS1980

Development and evaluation of two non-linear shell elements

Two plate and shell displacement elements are developed for use in large deflection non-linear analysis. The elements are of the 'stability' type, in which non-linear strains are included, with their values optimized by added higher order membrane functions and special types of elemental level constraints. The paper summarizes formulation and computational procedures, and discusses numerical results in detail. Conclusions are given regarding the effectiveness of the elements for solving both linear and non-linear shell analysis problems.

Jones, R. E.↗
NASA NTRS1981

Existence of axisymmetric modes of thin cylindrical shells with axial displacement restraint

A necessary and sufficient condition is derived for the existence of the axisymmetric mode of cylindrical shells with a radial displacement having one half wave along the axis and axial displacement restrained at both ends. The condition is purely geometric and consists of an upper bound on the mean radius of thickness ratio for a given fixed value of the length to mean radius ratio, above which the mode with one half wave in radial displacement along the axis ceases to exist. The proof is based on enforcing two basic lemmas concerned with the simplicity of the eigenvalues of the shell and the uniform ordering of these eigenvalues with the number of nodes of their corresponding radial displacement eigenfunctions.

El-Raheb, M.↗
NASA NTRS1981

High resolution X-ray spectra of solar flares. V - Interpretation of inner-shell transitions in Fe XX-Fe XXIII

The paper examines high-resolution solar flare iron line spectra recorded between 1.82 and 1.97 A by a spectrometer flown by the Naval Research Laboratory on an Air Force spacecraft launched on 1979 February 24. The emission line spectrum is due to inner-shell transitions in the ions Fe XX-Fe XXV. Using theoretical spectra and calculations of line intensities obtained by methods discussed by Merts, Cowan, and Magee (1976), electron temperatures as a function of time for two large class X flares are derived. These temperatures are deduced from intensities of lines of Fe XXII, Fe XXIII, and Fe XXIV. The determination of the differential emission measure between about 12-million and 20-million K using these temperatures is considered. The possibility of determining electron densities in flare and tokamak plasmas using the inner-shell spectra of Fe XXI and Fe XX is discussed.

Doschek, G. A.↗
NASA NTRS1981

On the shape and orientation control of an orbiting shallow spherical shell structure

A proposed method for controlling the shape and orientation of very large shallow dish type receiver/reflectors to be used in communication, radiometry and in electronic orbital based mail systems involves connecting a rigid light weight dumbell with heavy tip masses to the shell at its apex by a spring loaded double gimballed joint with dampling. To completely damp the system transient motion in all of the important lower frequency modes, an active control system is required. A mathematical model is extended to include the effects of point actuators located at preselected positions on the shell surface. The formulation of the uncontrolled dynamics assumes an a priori knowledge of the frequencies of all the elastic modes to be incorporated within the system model. As an example, three rigid body modes and six elastic modes are included in the model and six actuators are assumed, none of which lies on a nodal line or circle.

Bainum, P. M.↗
NASA NTRS1981

Deep anistropic shell program for tire analysis

A finite element program was constructed to model the mechanical response of a tire, treated as a deep anisotropic shell, to specified static loads. The program is based on a Sanders Budiansky type shell theory with the effects of transverse shear deformation and bending-extensional coupling included. A displacement formulation is used together with a total Lagrangian description of the deformation. Sixteen-node quadrilateral elements with bicubic shape functions are employed. The Noor basis reduction technique and various type of symmetry considerations serve to improve the computational efficiency.

Andersen, C. M.↗
NASA NTRS1981

Finite-element modeling of layered, anisotropic composite plates and shells: A review of recent research

Finite element papers published in the open literature on the static bending and free vibration of layered, anisotropic, and composite plates and shells are reviewed. A literature review of large-deflection bending and large-amplitude free oscillations of layered composite plates and shells is also presented. Non-finite element literature is cited for continuity of the discussion.

Reddy, J. N.↗
NASA NTRS1982

A mixed formulation finite element for linear thin shell analysis

An eight node curved thin shell slement was tested. The element is based on the degenerate solid concept and the mixed formulation with the independent inplane and transverse shear strains. The number of unknown parameters in the assumed strains is chosen to alleviate the spurious constaining or locking effect. It is indicated that for a pinched cylindrical shell with diaphragmed ends and fixed ends the present element shows good performance.

Lee, S. W.↗
NASA NTRS1982

The photochemistry of carbon-rich circumstellar shells

The effect of ambient ultraviolet photons on the chemical structure of carbon-rich, circumstellar envelopes is investigated with a simple formulation of the time-dependent, photochemical rate equations valid for optically thick shells. Molecules injected into the shielded inner envelope are broken down when they reach the outer regions where ambient ultraviolet photons can penetrate. A quantitative description of the abundance variations is obtained for the case of uniform expansion by detailed consideration of the shielding of the radiation by the dust and molecules of the envelope. Representative results are presented to illustrate the role of shielding in defining the extent of molecular envelopes, the formation of C I and C II shells by photodestruction of carbon-bearing molecules, and the development of layered chemical structures from the photobreakup of polyatomic molecules. Photochemistry makes the outer parts of thick, carbon-rich envelopes into complex regions containing radicals, ions, and atoms which are of considerable observational and theoretical interest.

Huggins, P. J.↗
NASA NTRS1981

Mixed models and reduced/selective integration displacement models for nonlinear shell analysis

One of the objectives of the present investigation is to identify classes of equivalent mixed models and reduced/selective integration displacement models for curved shell structures. A second objective is concerned with the identification of the spurious modes exhibited by various mixed models and their equivalent reduced integration displacement models. The merits of using mixed models are also evaluated. The mixed elements developed in the current investigation differ from those presented by Noor and Hartley (1977) by the fact that the stress resultants are discontinuous at interelement boundaries and, therefore, are eliminated on the element level. The high accuracy and effectiveness of the elements developed is demonstrated by means of numerical examples, taking into account three geometrically nonlinear problems of shallow shells.

Noor, A. K.↗
NASA NTRS1983

Shell-Tile Thermal-Protection System

Durable shell-tile thermal-protection system consists of interlocking upper and lower hard caps, incorporating appropriate stiffeners and enclosing lightweight fibrous insulation. New shell tile more durable than reusable surface insulation (RSI) currently used on Space Shuttle orbiter.

Macconochie, I. O.↗