Search NASA⌕ Search

SEARCH · Search NASA

Results for “Space structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Rollable Corrugated Tubular Booms

A promising candidate for a new class of deployable composite boom is the COrrugated ROllable TUbular Boom (COROTUB), which is to be employed on future large space structures by the National Aeronautics and Space Administration (NASA). The COROTUB’s two corrugated thin shells form a closed section, which yields high bending and torsional stiffness, allowing for high dimensional stability. The corrugation geometry that dictates the boom cross-section shape was completely defined by closed-form analytical equations given a set of key design parameters. Parametric studies of two geometric variables were used to evaluate which parameters most influence the cross-section’s area moment of inertia and torsional constant. The number of corrugations, flattened height of the boom, and concave and convex corrugation radii were varied to study the complete boom design space. Deeper corrugations increased the local buckling (crimpling) loads of the thin-shell boom but reduced the area moment of inertia and therefore the global buckling load of the beam-column member, and thus a fine balance was sought. Finite element analyses of pure bending and compression load cases for short, 1.22-m-long fully-deployed booms ofeither the same size (flattened height) or similar inertia properties, were first carried out to efficiently study this design trade-off in detail.A second computational study evaluated the boom transition shape and the structural response of a 6-m-long partially-deployed boom, where the effects of partially bracing the root of the boom were also assessed. It was found that bracing length could greatly affect the strength and stiffness of this boom.Bracing type (as in the discrete number of clamps at the root) had no effect on stiffness, but particularly impacted strength for loading cases and boundary conditions that promoted the onset of local web buckling at the root. The corrugated designs were also found to improve, by as much as 20%, the boom bending and axial strength and boom transition length from flat to deployed when compared to a state-of-the-art boom alternative of the same size, for short bracing distances, such as those that would be required by small satellite applications. In addition, they showed a comparable structural response for longer bracing supports.

Booms↗

Corrugated Rollable Tubular Booms

A promising candidate for a new class of deployable composite boom is the COrrugated ROllable TUbular Boom (COROTUB), which is to be employed on future large space structures by the National Aeronautics and Space Administration (NASA). This is due to its two corrugated thin-shells forming a closed-section,which yields high bending and torsion stiffness, allowing for high dimensional stability. The corrugation geometry that dictates the boom cross-section shape is completely defined by closed-form analytical equations given a set of key input parameters available to the designer. Parametric studies changing two geometric variables are used to evaluate which parameters most influence the cross-section’s area moment of inertia and torsional constant. The number of corrugations, flattened height of the boom, and concave and convex corrugation radii are varied to study the complete boom design space. Deeper corrugations increase the local buckling loads (crimpling) of the thin-shell boom but reduce the area moment of inertia and therefore the global Euler buckling load of the compressive member,and thus a fine balance is sought. Finite element analyses of pure bending and compression load cases for 1.22 m boom specimens were carried out to study this design trade-off in detail. Based on previous work, several thin-ply composite laminates have been selected for the different shells that form the cross-section. Feasible boom designs with a maximized stiffness and load-carrying capacity will be manufactured to study their rollability and for experimental characterization. Structural characterization tests and additional numerical analyses will provide guidelines towards future corrugated boom designs and adequate boundary conditions to maximize the boom bending strength.

Deployable Booms↗

Experiments using least square lattice filters for the identification of structural dynamics

An approach for identifying the dynamics of large space structures is applied to a free-free beam. In this approach the system's order is determined on-line, along with mode shapes, using recursive lattice filters which provide a least square estimate of the measurement data. The mode shapes determined are orthonormal in the space of the measurements and, hence, are not the natural modes of the structure. To determine the natural modes of the structure, a method based on the fast Fourier transform is used on the outputs of the lattice filter. These natural modes are used to obtain the modal amplitude time series which provides the input data for an output error parameter identification scheme that identifies the ARMA parameters of the difference equation model of the modes. the approach is applied to both simulated and experimental data.

Sundararajan, N.↗

Hardware survey for the avionics test bed

A survey of maor hardware items that could possibly be used in the development of an avionics test bed for space shuttle attached or autonomous large space structures was conducted in NASA Johnson Space Center building 16. The results of the survey are organized to show the hardware by laboratory usage. Computer systems in each laboratory are described in some detail.

Cobb, J. M.↗

Results of the M.I.T. Beam Assembly Teleoperator and Integrated Control Station

To examine the issues of optimum human-machine mixtures for orbital assembly operations, a full six degree-of-freedom teleoperator system for assembly of large space structures has been developed by the Space Systems Laboratory. This consists of a free-flying neutrally buoyant Beam Assembly Teleoperator (BAT) with two manipulators, and a modular Integrated Control Station (ICS). The design and configuration of both the BAT and the ICS are described in some detail in this paper. In addition, qualitative results from early tests of the system are presented. These tests concentrated mostly on free-flying operations and grasping. Future tests will involve complete teleoperated assembly.

Spofford, J. R.↗

Results of the ACCESS space construction Shuttle flight experiment

The ACCESS (Assembly Concept for Construction of Erectable Space Structure) experiment was launched on the Orbiter Atlantis on November 26, 1985. ACCESS was designed to study manual assembly of a 45-foot long truss structure by two astronauts working in space suits in the Orbiter cargo bay. This paper describes the experiment and hardware used, and compares on-orbit construction timelines to underwater neutral buoyancy data. In-flight photographs of assembly tasks and comments made by the crew at the postflight debriefing are also included. It was found that all tasks could be accomplished and that assembly times compared favorably with neutral buoyancy data.

Heard, W. L., Jr.↗

Controls-structures-electromagnetics interaction program

A technology development program is described involving Controls Structures Electromagnetics Interaction (CSEI) for large space structures. The CSEI program was developed as part of the continuing effort following the successful kinematic deployment and RF tests of the 15 meter Hoop/Column antenna. One lesson learned was the importance of making reflector surface adjustment after fabrication and deployment. Given are program objectives, ground based test configuration, Intelsat adaptive feed, reflector shape prediction model, control experiment concepts, master schedule, and Control Of Flexible Structures-II (COFS-II) baseline configuration.

Grantham, William L.↗

Theory of resonant tunneling in a variably spaced multiquantum well structure - An Airy function approach

A theoretical study of resonant tunneling in multilayered heterostructures is presented based on an exact solution of the Schroedinger equation under the application of a constant electric field. By use of the transfer matrix approach, the transmissivity of the structure is determined as a function of the incident electron energy. The approach presented herein is easily extended to many layer structures where it is more accurate than other existing transfer matrix or Wentzel-Kramers-Brillouin (WKB) models. The transmission resonances are compared to the bound-state energies calculated for a finite square well under bias using either an asymmetric square-well model or the exact solution of an infinite square well under the application of an electric field. The results show good agreement with other existing models as well as with the bound-state energies. The calculations were then applied to a new superlattice structure, the variably spaced superlattice energy filter, which is designed such that under bias the spatial quantization levels fully align. Based on these calculations, a new class of resonant tunneling superlattice devices can be designed.

Brennan, K. F.↗

Block-Krylov component synthesis method for structural model reduction

A new analytical method is presented for generating component shape vectors, or Ritz vectors, for use in component synthesis. Based on the concept of a block-Krylov subspace, easily derived recurrence relations generate blocks of Ritz vectors for each component. The subspace spanned by the Ritz vectors is called a block-Krylov subspace. The synthesis uses the new Ritz vectors rather than component normal modes to reduce the order of large, finite-element component models. An advantage of the Ritz vectors is that they involve significantly less computation than component normal modes. Both 'free-interface' and 'fixed-interface' component models are derived. They yield block-Krylov formulations paralleling the concepts of free-interface and fixed-interface component modal synthesis. Additionally, block-Krylov reduced-order component models are shown to have special disturbability/observability properties. Consequently, the method is attractive in active structural control applications, such as large space structures. The new fixed-interface methodology is demonstrated by a numerical example. The accuracy is found to be comparable to that of fixed-interface component modal synthesis.

Craig, Roy R., Jr.↗

Controls-structures integrated design optimization with shape variations

The shape design variables have been introduced into the set of design variables of the Controls-Structure Integrated (CSI) Design of space-structures. The importance of the shape variations in improving the design (obtained with only control and sizing variables) has been aptly illustrated. Two different types of design variables that describe the shape variations of the structure have been introduced. In the first case, the nodal coordinates have been considered as design variables. This has the inherent difficulty of having too many design variables. This not only is time consuming but also memory intensive and may not yield a manufacturable shape to the structure. The second approach has been introduced to overcome this difficulty. The structure is allowed to vary in a particular pre defined pattern. The coefficients of these patterns are considered as the shape design variables. The eigenvalue and eigenvector sensitivity equations with respect to these coefficient design variables have been developed and are used to approximate the eigenvalues and eigenvectors in a perturbed design.

Koganti, Gopichand↗

The Lagrangian-space Effective Field Theory of large scale structures

Here, we introduce a Lagrangian-space Effective Field Theory (LEFT) formalism for the study of cosmological large scale structures. Unlike the previous Eulerian-space construction, it is naturally formulated as an effective field theory of extended objects in Lagrangian space. In LEFT the resulting finite size effects are described using a multipole expansion parameterized by a set of time dependent coefficients and organized in powers of the ratio of the wavenumber of interest k over the non-linear scale k NL . The multipoles encode the effects of the short distance modes on the long-wavelength universe and absorb UV divergences when present. There are no IR divergences in LEFT. Some of the parameters that control the perturbative approach are not assumed to be small and can be automatically resummed. We present an illustrative one-loop calculation for a power law universe. We describe the dynamics both at the level of the equations of motion and through an action formalism.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of natural damping on the dynamics and control of a class of optimally designed structures

In this study the vibration control of large space structures with structural damping is investigated. Emphasis is made on the control of both a class of optimally designed (stepped) structures and also the corresponding uniform structures using a cantilever beam as an example. The open loop and closed loop dynamics are compared and the transient responses are determined to study the effect of damping on the control system design.

Satyanarayana, K.↗

Improvement of structural models using covariance analysis and nonlinear generalized least squares

The next generation of large, flexible space structures will be too light to support their own weight, requiring a system of structural supports for ground testing. The authors have proposed multiple boundary-condition testing (MBCT), using more than one support condition to reduce uncertainties associated with the supports. MBCT would revise the mass and stiffness matrix, analytically qualifying the structure for operation in space. The same procedure is applicable to other common test conditions, such as empty/loaded tanks and subsystem/system level tests. This paper examines three techniques for constructing the covariance matrix required by nonlinear generalized least squares (NGLS) to update structural models based on modal test data. The methods range from a complicated approach used to generate the simulation data (i.e., the correct answer) to a diagonal matrix based on only two constants. The results show that NGLS is very insensitive to assumptions about the covariance matrix, suggesting that a workable NGLS procedure is possible. The examples also indicate that the multiple boundary condition procedure more accurately reduces errors than individual boundary condition tests alone.

Glaser, R. J.↗

The AFeO{sub 2} (A=K, Rb and Cs) family: A comparative study of structures and structural phase transitions

Structures and phase transitions for the isostructural series of compounds KFeO{sub 2}, RbFeO{sub 2} and CsFeO{sub 2} have been systematically studied by synchrotron X-ray high resolution powder diffraction experiments and in case of CsFeO{sub 2} also by single crystal diffractometry. At room temperature, all of the three compounds crystallize in the orthorhombic (Pbca) KGaO{sub 2} type of structure consisting of a three dimensional network of corner-sharing [FeO{sub 4/2}]{sup -} tetrahedra, which at elevated temperatures shows a reversible phase transformation to a cubic structure (space group Fd3-barm). For KFeO{sub 2}, RbFeO{sub 2} and CsFeO{sub 2} this phase transformation takes place at 1003 K, 737 K and 350 K respectively, as confirmed by differential scanning calorimetry and X-ray diffraction. Upon heating through the transitions the major structural changes are driven by the onset or enhancement of librational motion of the FeO{sub 4} tetrahedra. Due to this phenomenon the Fe-O-Fe bonds appear to step-wise getting straight, seemingly approaching 180 deg. within the time and space averaged structure. - Graphical abstract: Reciprocal layer hk0 for the orthorhombic room temperature phase, with pseudo cubic symmetry due to twinning, and the cubic high temperature phase of CsFeO{sub 2}. Upon heating the major structural changes are driven by the enhancement of librational motion of the [FeO{sub 4/2}]{sup -} corner-sharing tetrahedra, a phenomenon related to the high/low phase transition of cristobalite.

36 MATERIALS SCIENCE↗

Collision avoidance in space

Collisions in earth orbital space between operational payloads and various forms of space debris (nonoperational payloads, nonfunctional mission-related objects and fragments resulting from collisions and explosions) are discussed and possible means of avoiding them are considered. From 10,000 to 15,000 objects are estimated to be in earth orbital space, most of which represent spacecraft fragments and debris too small to be detected and tracked by earth-based sensors, and it is considered likely that some of them will be or have already been involved in direct collisions with the ever increasing number of operational satellites and space stations. Means of protecting proposed large space structures and smaller spacecraft from significant damage by larger space objects, particularly in the 400-4000 km altitude range where most debris occurs, include structural redundancy and the double shielding of sensitive components. Other means of collision avoidance are the collection or relocation of satellites, rocket bodies and other objects by the Space Shuttle, the prevention of explosions and the disposal of spent rocket parts by reentry. Finally, a management structure would be required to administer guidelines for the prevention and elimination of space debris.

Kessler, D. J.↗