Search NASA⌕ Search

SEARCH · Search NASA

Results for “Standard Problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

TASQC Quantum Key Transfer Program

Securely transferring timing information in the electrical grid is a critical component of securing the nation's infrastructure from cyber attacks. One solution to this problem is to use quantum information to securely transfer the timing information across sites. This software provides such an infrastructure using a standard Java webserver that pulls the quantum information from associated hardware.

Billings, Jay J.↗

A Review on Protection Challenges of Transmission Lines Connected to Inverter-Based Resources

Utilities, university researchers, research institutes, and relay manufacturers have performed studies to investigate different aspects of high IBR penetration. Almost all studies support 1) creating international and national standards to regulate the IBRs, 2) revising engineering tools to address shortcomings, and 3) adjusting the protective relay settings to resolve protection problems. This paper summarizes the studies and research conducted in recent years to quantify the impact of IBR penetration on transmission line protection and to identify potential solutions to improve the dependability and reliability of grid protection systems.

14 SOLAR ENERGY↗

Possible evidence for the breakdown of the CKM-paradigm of CP-violation

Using primarily experimental inputs for S(B{sub d} {yields} {psi} K{sub s}), {Delta}M{sub B{sub s}}, {Delta}M{sub B{sub d}}, BR (B {yields} {tau}{nu}) and {epsilon}{sub K} along with necessary inputs from the lattice, we find that the measured value of sin(2{beta}) is smaller than expectations of the Standard Model by as much as 3.3 {sigma}, and also that the measured value of the BR(B {yields} {tau}{nu}) seems to be less than the predicted value by about 2.8 {sigma}. However, through a critical study we show that most likely the dominant source of these deviations is in B{sub d(s)} mixings and in sin(2{beta}) and less so in B {yields} {tau}{nu}, and also that the bulk of the problem persists even if input from {epsilon}{sub K} is not used. The fact that kaon mixing and {epsilon}{sub K} are not the dominant source of the deviation from the Standard Model has the very important consequence that model independent considerations imply that the scale of the relevant new CP-violating physics is below O(2 TeV), and possibly even a few hundred GeVs, thus suggesting that direct signals of the new particle(s) may well be accessible in collider experiments at the LHC and perhaps even at the Tevatron.

43 PARTICLE ACCELERATORS↗

PETSc/TAO Users Manual V.3.21

This manual describes the use of the Portable, Extensible Toolkit for Scientific Computation (PETSc) and the Toolkit for Advanced Optimization (TAO) for the numerical solution of partial differential equations (PDEs) and related problems on high-performance computers. PETSc/TAO is a suite of data structures and routines that provide the building blocks for implementing large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all distributed memory communication. PETSc/TAO includes a large suite of parallel linear solvers, nonlinear solvers, time integrators, and optimizers that may be used in application codes written in Fortran, C, C++, and Python (via petsc4py; see Getting Started ). The library is organized hierarchically, enabling users to employ the abstraction level most appropriate for a particular problem. By using techniques of object-oriented programming, PETSc provides enormous flexibility for users.

97 MATHEMATICS AND COMPUTING↗

Standard electrode potential, Tafel equation, and the solvation thermodynamics

Equilibrium in the electronic subsystem across the solution-metal interface is considered to connect the standard electrode potential to the statistics of localized electronic states in solution. We argue that a correct derivation of the Nernst equation for the electrode potential requires a careful separation of the relevant time scales. An equation for the standard metal potential is derived linking it to the thermodynamics of solvation. The Anderson-Newns model for electronic delocalization between the solution and the electrode is combined with a bilinear model of solute-solvent coupling introducing nonlinear solvation into the theory of heterogeneous electron transfer. We therefore are capable of addressing the question of how nonlinear solvation affects electrochemical observables. The transfer coefficient of electrode kinetics is shown to be equal to the derivative of the free energy, or generalized force, required to shift the unoccupied electronic level in the bulk. The transfer coefficient thus directly quantifies the extent of nonlinear solvation of the redox couple. The current model allows the transfer coefficient to deviate from the value of 0.5 of the linear solvation models at zero electrode overpotential. The electrode current curves become asymmetric in respect to the change in the sign of the electrode overpotential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exact sub-grid interface correction schemes for elliptic interface problems

We introduce a non-conforming finite element method for second order elliptic interface problems. Our approach applies to problems in which discontinuous coefficients and singular sources on the interface may give rise to jump discontinuities in either the solution or its normal derivative. Given a standard background mesh and an interface that passes between elements, the key idea is to construct a singular correction function which satisfies the prescribed jump conditions, providing accurate sub-grid resolution of the discontinuities. Utilizing the closest point extension and an implicit interface representation by the signed distance function, an algorithm is established to construct the correction function. The result is a function which is supported only on the interface elements, represented by the regular basis functions, and bounded independently of the interface location with respect to the background mesh. In the particular case of a constant second order coefficient, our regularization by singular function is straightforward, and the resulting left-hand-side is identical to that of a regular problem without introducing any instability. The influence of the regularization appears solely on the right-hand-side, which simplifies the implementation. In the more general case of discontinuous second order coefficients, a normalization is invoked which introduces a constraint equation on the interface. This results in a problem statement similar to that of a saddle-point problem. We employ two-level-iteration as the solution strategy, which exhibits aspects similar to those of iterative preconditioning strategies.

97 MATHEMATICS AND COMPUTING↗

The KTOI Ecosystem Project Relational Database : a Report Prepared by Statistical Consulting Services for KTOI Describing the Key Components and Specifications of the KTOI Relational Database.

Data are the central focus of any research project. Their collection and analysis are crucial to meeting project goals, testing scientific hypotheses, and drawing relevant conclusions. Typical research projects often devote the majority of their resources to the collection, storage and analysis of data. Therefore, issues related to data quality should be of foremost concern. Data quality issues are even more important when conducting multifaceted studies involving several teams of researchers. Without the use of a standardized protocol, for example, independent data collection carried out by separate research efforts can lead to inconsistencies, confusion and errors throughout the larger project. A database management system can be utilized to help avoid all of the aforementioned problems. The centralization of data into a common relational unit, i.e. a relational database, shifts the responsibility for data quality and maintenance from multiple individuals to a single database manager, thus allowing data quality issues to be assessed and corrected in a timely manner. The database system also provides an easy mechanism for standardizing data components, such as variable names and values uniformly across all segments of a project. This is particularly an important issue when data are collected on a number of biological/physical response and explanatory variables from various locations and times. The database system can integrate all segments of a large study into one unit, while providing oversight and accessibility to the data collection process. The quality of all data collected is uniformly maintained and compatibility between research efforts ensured. While the physical database would exist in a central location, access will not be physically limited. Advanced database interfaces are created to operate over the internet utilizing a Web-based relational database, allowing project members to access their data from virtually anywhere. These interfaces provide users with the ability to upload, download, edit, and search data remotely, creating a dynamic system that is continually updated with the most recent information. At the same time, data are protected through user access restrictions, by implementing user profiles and password protected security. This accessibility could be set to any combination of read/write/edit abilities from an administrator capacity with full access to all data, to a highly restricted public access capability limited to general project information. Generation of customized summary reports and basic graphical routines could also be obtained through a Web-based interference. Using these types of features, users could produce summary tables, track trends of specified response variables over time or location, and compare results from various disciplines. Exploration of data in this manner can help users to better define and clarify their research goals and provide a means of integrating various aspects of a larger research project.

13 HYDRO ENERGY↗

Sparse thermal data for cellular automata modeling of grain structure in additive manufacturing

Grain growth in the wake of the melt pool formed during alloy-based additive manufacturing (AM) is complex and multifaceted, depending on parameters governing heat transport, fluid flow, and solidification itself. Cellular automata (CA) models have proven effective in providing computationally efficient and physically sound predictions of grain structure for several AM problems, but their efficiency is tied to the performance of heat transport models. CA models use only a small portion of the problem's temperature data (near the moving melt pool boundary), and much of the CA calculations do not affect the final result due to re-melting of material. Coupling of and communication between heat transport and solidification models, and eliminating operations irrelevant towards final grain structure prediction, will be necessary for using these methods for efficient simulation of large parts. In this work, we introduce a procedure of decoupling the CA from temperature field simulation, using files of relevant temperature data written by the heat transport model. This approach is validated against the standard coupling approach using data obtained through the computational fluid dynamics software OpenFOAM. Negligible differences are seen in grain size, volume, and texture distributions for multilayer simulation of test problems, while the quantity of temperature data for these test problems was reduced by four orders of magnitude (from 100s of GB to 10s of MB) and the code performance sped up by a factor of around 50. Furthermore, variability in microstructure as a function of cell size, substrate, time step, and nucleation parameters is studied, and it is found that cell sizes less than or equal to 1.67 μm and sufficiently small time steps yield Αstatistically equivalent microstructures. Finally, a potential use case for this CA approach—the layer-wise convergence in grain structure starting from extremes in initial grain size—is examined. This approach's ability to simulate expected trends in nucleation and epitaxial grain growth for large regions of microstructure, simulated independently of heat transport models themselves, should prove useful for investigation of various microstructure uncertainties and prediction of part-scale experimental results.

36 MATERIALS SCIENCE↗

Innovating the next generation of commercial smart building software

Nearly 30% of commercial building energy use is wasted due to equipment faults and HVAC controls problems. The result is increased emissions, compromised comfort and productivity, and less reliable coordination of building power needs with a clean grid. The energy impact alone represents $17 billion in potential savings. Today’s smart building software provides a robust solution to address these operational deficiencies. Energy management and information systems (EMIS) are saving up to 9% on average, with two-year paybacks. They are being incorporated into energy management processes, commissioning services, and utility programs. As effective as they are, two barriers prevent even deeper benefits; limited personnel to fix problems once they are identified, and the expense and time to manually implement changes in control systems. In partnership with the research community, the EMIS industry is developing new capabilities to overcome these barriers. Moving beyond siloed products for either fault detection and diagnostics, or optimal control, these new capabilities empower users to not only automatically identify faults, but also to push corrective action, and control improvements to their buildings. In this paper, several areas for enhancements are documented: ‘one-time’ correction of faults such as setpoints, schedules, and economizer lockouts; short-term active testing for automated proportional integral derivative (PID) loop tuning and functional testing; and continuous supervisory control for demand flexibility and year-round efficiency. Results are presented from a pair of partner implementations out of a dozen providers integrating these enhancements into their products, including field tests from across the country, and insights into operator acceptance and integration into operations and maintenance practices.

Casillas, Armando↗

Statistics of baryon correlation functions in lattice QCD

A systematic analysis of the structure of single-baryon correlation functions calculated with lattice QCD is performed, with a particular focus on characterizing the structure of the noise associated with quantum fluctuations. The signal-to-noise problem in these correlation functions is shown, as long suspected, to result from a sign problem. The log-magnitude and complex phase are found to be approximately described by normal and wrapped normal distributions respectively. Properties of circular statistics are used to understand the emergence of a large time noise region where standard energy measurements are unreliable. Power-law tails in the distribution of baryon correlation functions, associated with stable distributions and “Lévy flights,” are found to play a central role in their time evolution. A new method of analyzing correlation functions is considered for which the signal-to-noise ratio of energy measurements is constant, rather than exponentially degrading, with increasing source-sink separation time. This new method includes an additional systematic uncertainty that can be removed by performing an extrapolation, and the signal-to-noise problem reemerges in the statistics of this extrapolation. It is demonstrated that this new method allows accurate results for the nucleon mass to be extracted from the large-time noise region inaccessible to standard methods. The observations presented here are expected to apply to quantum Monte Carlo calculations more generally. Similar methods to those introduced here may lead to practical improvements in analysis of noisier systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Changes in trachoma indicators in Kiribati with two rounds of azithromycin mass drug administration, measured in serial population-based surveys

Baseline mapping in the two major population centers of Kiribati showed that trachoma was a public health problem in need of programmatic interventions. After conducting two annual rounds of antibiotic mass drug administration (MDA), Kiribati undertook trachoma impact surveys in 2019, using standardized two-stage cluster surveys in the evaluation units of Kiritimati Island and Tarawa. In Kiritimati, 516 households were visited and in Tarawa, 772 households were visited. Nearly all households had a drinking water source and access to an improved latrine. The prevalence of trachomatous trichiasis remained above the elimination threshold (0.2% in ≥15-year-olds) and was virtually unchanged from baseline. The prevalence of trachomatous inflammation—follicular (TF) in 1–9-year-olds decreased by approximately 40% from baseline in both evaluation units but remained above the 5% TF prevalence threshold for stopping MDA. TF prevalence at impact survey was 11.5% in Kiritimati and 17.9% in Tarawa. Infection prevalence in 1–9-year-olds by PCR was 0.96% in Kiritimati and 3.3% in Tarawa. Using a multiplex bead assay to measure antibodies to the C. trachomatis antigen Pgp3, seroprevalence in 1–9-year-olds was 30.2% in Kiritimati and 31.4% in Tarawa. The seroconversion rate, in seroconversion events/100 children/year, was 9.0 in Kiritimati and 9.2 in Tarawa. Seroprevalence and seroconversion rates were both assessed by four different assays, with strong agreement between tests. These results show that, despite decreases in indicators associated with infection at impact survey, trachoma remains a public health problem in Kiribati, and provide additional information about changes in serological indicators after MDA.

60 APPLIED LIFE SCIENCES↗

Detection of Historical and Future Precipitation Variations and Extremes Over the Continental United States

Problem: The overall goal of this proposal is to detect observed seasonal-mean precipitation variations and extreme event occurrences over the United States. Detection, e.g. the process of demonstrating that an observed change in climate is unusual, first requires some means of estimating the range of internal variability absent any external drivers. Ideally, the internal variability would be derived from the observations themselves, however generally the observed variability is a confluence of both internal variability and variability in response to external drivers. Further, numerical climate models—the standard tool for detection studies—have their own estimates of intrinsic variability, which may differ substantially from that found in the observed system as well as other model systems. These problems are further compounded for weather and climate extremes, which as singular events are particularly ill-suited for detection studies because of their infrequent occurrence, limited spatial range, and underestimation within global and even regional numerical models. Rationale: As a basis for this research we will show how stochastic daily-precipitation models—models in which the simulated interannual-to-multidecadal precipitation variance is purely the result of the random evolution of daily precipitation events within a given time period—can be used to address many of these issues simultaneously. Through the novel application of these well-established models, we can first estimate the changes/trends in various means and extremes that can occur even with fixed daily-precipitation characteristics, e.g. that can occur simply as a result of the stochastic evolution of daily weather events within a given climate. Detection of a change in the observed climate—either naturally or anthropogenically forced—can then be defined as any change relative to this stochastic variability, e.g. as changes/trends in the means and extremes that could only have occurred through a change in the underlying climate. As such, this method is capable of detecting “hot spot” regions—as well as “flare ups” within the hot spot regions—that have experienced interannual to multi-decadal scale variations and trends in seasonal-mean precipitation and extreme events. Further by applying the same methods to numerical climate models we can discern the fidelity of the current-generation climate models in representing detectability within the observed climate system. In this way, we can objectively determine the utility of these model systems for performing detection studies of historical and future climate change.

54 ENVIRONMENTAL SCIENCES↗

A subsurface add-on for standard atomic force microscopes

The application of ultrasound in an Atomic Force Microscope (AFM) gives access to subsurface information. However, no commercially AFM exists that is equipped with this technique. The main problems are the electronic crosstalk in the AFM setup and the insufficiently strong excitation of the cantilever at ultrasonic (MHz) frequencies. In this paper, we describe the development of an add-on that provides a solution to these problems by using a special piezo element with a lowest resonance frequency of 2.5 MHz and by separating the electronic connection for this high frequency piezo element from all other connections. In this sense, we support researches with the possibility to perform subsurface measurements with their existing AFMs and hopefully pave also the way for the development of a commercial AFM that is capable of imaging subsurface features with nanometer resolution.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

EVOLUTIONARY SIGNATURES IN THE FORMATION OF LOW-MASS PROTOSTARS. II. TOWARD RECONCILING MODELS AND OBSERVATIONS

A long-standing problem in low-mass star formation is the 'luminosity problem', whereby protostars are underluminous compared to the accretion luminosity expected both from theoretical collapse calculations and arguments based on the minimum accretion rate necessary to form a star within the embedded phase duration. Motivated by this luminosity problem, we present a set of evolutionary models describing the collapse of low-mass, dense cores into protostars. We use as our starting point the evolutionary model following the inside-out collapse of a singular isothermal sphere as presented by Young and Evans. We calculate the radiative transfer of the collapsing core throughout the full duration of the collapse in two dimensions. From the resulting spectral energy distributions, we calculate standard observational signatures (L{sub bol}, T{sub bol}, L{sub bol}/L{sub smm}) to directly compare to observations. We incorporate several modifications and additions to the original Young and Evans model in an effort to better match observations with model predictions; we include (1) the opacity from scattering in the radiative transfer, (2) a circumstellar disk directly in the two-dimensional radiative transfer, (3) a two-dimensional envelope structure, taking into account the effects of rotation, (4) mass-loss and the opening of outflow cavities, and (5) a simple treatment of episodic mass accretion. We find that scattering, two-dimensional geometry, mass-loss, and outflow cavities all affect the model predictions, as expected, but none resolve the luminosity problem. On the other hand, we find that a cycle of episodic mass accretion similar to that predicted by recent theoretical work can resolve this problem and bring the model predictions into better agreement with observations. Standard assumptions about the interplay between mass accretion and mass loss in our model give star formation efficiencies consistent with recent observations that compare the core mass function and stellar initial mass function. Finally, the combination of outflow cavities and episodic mass accretion reduces the connection between observational class and physical stage to the point where neither of the two commonly used observational signatures (T{sub bol} and L{sub bol}/L{sub smm}) can be considered reliable indicators of physical stage.

79 ASTRONOMY AND ASTROPHYSICS↗

Gauge invariant two-point vertices of shadow fields, AdS/CFT, and conformal fields

In the framework of gauge invariant Stueckelberg approach, totally symmetric arbitrary spin shadow fields in flat space-time of dimension greater than or equal to four are studied. Gauge invariant two-point vertices for such shadow fields are obtained. We demonstrate that, in Stueckelberg gauge frame, these gauge invariant vertices become the standard two-point vertices of CFT. Light-cone gauge two-point vertices of the shadow fields are also obtained. AdS/CFT correspondence for the shadow fields and the non-normalizable solutions of free massless totally symmetric arbitrary spin AdS fields is studied. AdS fields are considered in a modified de Donder gauge and this simplifies considerably the study of AdS/CFT correspondence. We demonstrate that the bulk action, when it is evaluated on solution of the Dirichlet problem, leads to the two-point gauge invariant vertex of shadow field. Also we show that the bulk action evaluated on solution of the Dirichlet problem leads to new description of conformal fields. The new description involves Stueckelberg gauge symmetries and gives simple higher-derivative Lagrangian for the conformal arbitrary spin field. In the Stueckelberg gauge frame, our Lagrangian becomes the standard Lagrangian of conformal field. Light-cone gauge Lagrangian of the arbitrary spin conformal field is also obtained.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A theory of R(D*, D) anomaly with right-handed currents

We present an ultraviolet complete theory for the R ( D * ) and R ( D ) anomaly in terms of a low mass W ± R gauge boson of a class of left-right symmetric models. These models, which are based on the gauge symmetry SU(3) c × SU(2) L × SU(2) R × U(1) B - L , utilize vector-like fermions to generate quark and lepton masses via a universal seesaw mechanism. A parity symmetric version as well as an asymmetric version are studied. A light sterile neutrino emerges naturally in this setup, which allows for new decay modes of B -meson via right-handed currents. We show that these models can explain R ( D * ) and R ( D ) anomaly while being consistent with LHC and LEP data as well as low energy flavor constraints arising from \( {K}_L-{K}_S,\kern0.5em {B}_{d,s}-{\overline{B}}_{d,s},\kern0.5em D-\overline{D} \) mixing, etc., but only for a limited range of the W R mass: 1.2 (1.8) TeV ≤ \( {M}_{W_R} \) ≤ 3 TeV for parity asymmetric (symmetric) Yukawa sectors. The ratio R ( D )/ R ( D * ) is predicted to be ≃ 1.16, which is the same as in the Standard Model. The light sterile neutrinos predicted by the model may be relevant for explaining the MiniBoone and LSND neutrino oscillation results. The parity symmetric version of the model provides a simple solution to the strong CP problem without relying on the axion. It also predicts an isospin singlet top partner with a mass M T = (1.5 - 2.5) TeV.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Model for late dark matter decay

The standard cold dark matter cosmological model, while successful in explaining the observed large scale structure of the Universe, tends to overpredict structure on small scales. It has been proposed this problem may be alleviated in a class of late-decaying dark matter models, in which the parent dark matter particle decays to an almost degenerate daughter, plus a relativistic final state. We construct explicit particle physics models that realize this goal while obeying observational constraints. To achieve this, we introduce a pair of fermionic dark matter candidates and a new scalar field, which obey either a Z{sub 4} or a U(1) symmetry. Through the spontaneous breaking of these symmetries, and coupling of the new fields to standard model particles, we demonstrate that the desired decay process may be obtained. We also discuss the dark matter production processes in these models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On the stability of a soft-wall model

We investigate the stability and fluctuations of a soft-wall model that has an asymptotically anti-de Sitter metric and a scalar field that has an asymptotically power-law dependence in the conformal coordinate. By imposing UV boundary conditions, the soft-wall mass scale can be fixed to be near the TeV scale and causes the radion to no longer be massless. A hierarchy between the weak scale and the Planck scale can be generated for various particle spectrum behavior, although natural values only occur for a gravitational sector containing scalar fields that act like unparticles. In addition, if bulk standard model fields have nonstandard couplings to the gravitational sector, then a discrete particle spectrum can be realized in the nongravitational sector. This allows for the possibility of an unparticle solution to the hierarchy problem.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗