Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Butanol Separation from Humid CO 2 -Containing Multicomponent Vapor Mixtures by Zeolitic Imidazolate Frameworks

Butanol is a promising renewable fuel and feedstock. A major challenge in fermentative butanol production is to find a cost-effective butanol separation process from dilute aqueous solutions, usually an acetone-butanol-ethanol (ABE) mixture. Nanoporous zeolitic imidazolate frameworks (ZIFs) have shown potential for alcohol separation from dilute solutions. However, little is known about butanol separation from multicomponent mixtures using ZIFs, including the effects of the humid acid gas (CO 2 ) used to sparge the fermenter and generate the vapor product stream. We present a study of butanol separation by ZIF-8, ZIF-90, ZIF-71 and hybrid ZIF-8–90 and ZIF-8–71 adsorbents with binary butanol/water and multicomponent ABE feeds. To obtain reliable structure–property relations for ZIF adsorbents in realistic conditions, we combine multicomponent vapor breakthrough with structural, textural, and stability characterization techniques in humid CO 2 environments. In the absence of CO 2 , more hydrophobic materials such as ZIF-8, ZIF-8 55 -71 45 , ZIF-8 70 -90 30 , and ZIF-71 are found to be excellent candidates with butanol/water selectivities >10 and butanol capacities >3.5 mmol/g. However, in the presence of humid CO 2 , all the materials except ZIF-71 are found to degrade. The mechanistic aspects of this degradation are studied by FTIR spectroscopy and explained based upon acid gas attack of Zn–N coordinate bonds. ZIF-71 emerges as an excellent candidate owing to its acid gas stability, good butanol adsorption capacity, and selectivity. Vapor breakthrough with a model ABE solution demonstrates the high butanol selectivity of ZIF-71 relative to acetone, ethanol, and water and the recovery of a 65 mol % butanol product by desorption at 453 K. Finally, this study highlights the importance of determining structure–property relationships of MOF/ZIF materials in realistic multicomponent conditions, and the importance of acid gas stability in their applications.

09 BIOMASS FUELS↗

Design of quantum dot lattices in amorphous matrices by ion beam irradiation

We report on the highly controllable self-assembly of semiconductor quantum dots and metallic nanoparticles in a solid amorphous matrix, induced by ion beam irradiation of an amorphous multilayer. We demonstrate experimentally and theoretically a possibility to tune the basic structural properties of the quantum dots in a wide range. Furthermore, the sizes, distances, and arrangement type of the quantum dots follow simple equations dependent on the irradiation and the multilayer properties. We present a Monte Carlo model for the simulation and prediction of the structural properties of the materials formed by this method. The presented results enable engineering and simple production of functional materials or simple devices interesting for applications in nanotechnology.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structures and magnetic properties of Co-Zr-B magnets studied by first-principles calculations

The structures and magnetic properties of Co-Zr-B alloys near the composition of Co{sub 5}Zr with B at. % ≤6% were studied using adaptive genetic algorithm and first-principles calculations. The energy and magnetic moment contour maps as a function of chemical composition were constructed for the Co-Zr-B magnet alloys through extensive structure searches and calculations. We found that Co-Zr-B system exhibits the same structure motif as the “Co{sub 11}Zr{sub 2}” polymorphs, and such motif plays a key role in achieving strong magnetic anisotropy. Boron atoms were found to be able to substitute cobalt atoms or occupy the “interruption” sites. First-principles calculations showed that the magnetocrystalline anisotropy energies of the boron-doped alloys are close to that of the high-temperature rhombohedral Co{sub 5}Zr phase and larger than that of the low-temperature Co{sub 5.25}Zr phase. Our calculations provide useful guidelines for further experimental optimization of the magnetic performances of these alloys.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Utilization of mixed ligands to construct two new coordination polymers: Syntheses, structures and properties

The use of triazine and aromatic carboxylic acid as mixed chelating ligands in preparing two coordination polymers is described. Two new transition-metal coordination polymers, namely, [Co{sub 2}(bpdc){sub 4}(phdat){sub 2}] (1) and [Zn(bpdc)]{sub n} (2) (H{sub 2}bpdc=2,4-biphenyldicarboxylic acid, phdat=2,4-diamine-6-phenyl-1,3,5-triazine), have been hydrothermally synthesized and structurally characterized by IR, elemental analyses, X-ray single-crystal diffraction and TGA. Compound 1 is a 0D structure and extends to a 3D network by two different N–H···O and N–H···N hydrogen bonds. Compound 2 exhibits a 2D network with 4{sup 4}.6{sup 2} topological net, which contains two kinds of single helical chains. The interactions within each Co(II)–Co(II) pair of compound 1 are antiferromagnetic (g=2.19, J=−22 K, zj′=−0.00351 K). Furthermore, the photoluminescence property of 2 was also investigated in the solid state at room temperature. - Graphical abstract: Two polymeric metal compounds based on mixed-ligands were synthesized and characterized. The use of different metal ions results in distinct structures. The magnetic and fluorescent properties were also studied. - Highlights: • The first bpdc{sup 2−}/phdat-based 0D discrete coordination complex. • A new 2D architecture with two kinds of helical chains. • The structure-dependent magnetism and photoluminescence properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab Initio Modeling of Structure and Properties of Single and Mixed Alkali Silicate Glasses

A density functional theory (DFT)-based ab initio molecular dynamics (AIMD) has been applied to simulate models of single and mixed alkali silicate glasses with two different molar concentrations of alkali oxides. The structural environments and spatial distributions of alkali ions in the 10 simulated models with 20% and 30% of Li, Na, K and equal proportions of Li–Na and Na–K are studied in detail for subtle variations among the models. Quantum mechanical calculations of electronic structures, interatomic bonding, and mechanical and optical properties are carried out for each of the models, and the results are compared with available experimental observation and other simulations. The calculated findings are in good agreement with the experimental data. We have used the novel concept of using the total bond order density (TBOD), a quantum mechanical metric, to characterize internal cohesion in these glass models. The mixed alkali effect (MAE) is visible in the bulk mechanical properties but not obvious in other physical properties studied in this paper. We demonstrate that Li doping deviates from expected trend due to the much stronger Li–O bonding than those of Na and K doping. Our method is in contrast with current studies in alkali-doped silicate glasses based only on geometric characterizations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rare earth niobium oxynitrides, LnNbON{sub 2-{delta}} (Ln = Y, La, Pr, Nd, Gd, Dy): Synthesis, structure and properties

Graphical abstract: Ammonolysis of LnNbO{sub 4} (Ln = rare earth or Y) leads to the formation of oxynitrides of different structures depending on the size of the rare earth. Highlights: {yields} We have carried out ammonolysis of LnNbO{sub 4} (Ln = rare earth and Y) to form oxynitrides of different structures depending on the size of the rare earth. {yields} Infrared spectroscopy shows the marked difference between oxides and the corresponding oxynitrides. {yields} The oxynitrides are stable in air upto {approx}400 {sup o}C above which an intermediate phase with nitrogen molecules attached to the oxide lattice forms. {yields} Gadolinium niobium oxynitride shows paramagnetism. -- Abstract: Ammonolysis of rare earth niobates of the type LnNbO{sub 4} (Ln = Y, La, Pr, Nd, Gd, Dy) yields oxynitrides of different structures. When Ln = La, Nd and Pr, the structure is that of an orthorhombic perovskite of the general formula LnNbON{sub 2}. As the size of the rare earth decreases, the oxynitride has a nitrogen-deficient defect fluorite (Ln = Pr, Nd, Gd), or pyrochlore (Ln = Y) structure. The IR spectra of the oxynitrides and the corresponding oxides are significantly different. Thermogravimetric analysis suggests the formation of an intermediate phase wherein the N{sub 2} molecule is attached to the oxide lattice above 400 {sup o}C and decomposes to give the oxide on heating in an oxygen atmosphere. Raman spectra of the intermediate phases show evidence for the N{identical_to}N stretching vibration. Gadolinium niobium oxynitride is found to be paramagnetic.

36 MATERIALS SCIENCE↗

Crystal structure of Tb5Ni2In4 and Y5Ni2In4, and magnetic properties of Dy5Ni2In4

The crystal structure of the R5Ni2In4 intermetallic compounds was earlier reported for R Ho, Er, Tm, and Lu (Lu5Ni2In4-type, oP22, Pbam); more recently the isostructural phases Dy5Ni2In4 and Sc5Ni2In4 have also been identified. Three inequivalent crystallographic sites are occupied by the R atoms in these compounds. We have synthesized and characterized Dy5Ni2In4 and the two new isotypic compounds Tb5Ni2In4 and Y5Ni2In4. So far, none of the physical properties have been reported on any of these phases; in this article we report on the physical properties of the Dy5Ni2In4 and the crystal structure of Tb5Ni2In4 and Y5Ni2In4 compounds. Measurements of the magnetic properties performed on Dy5Ni2In4 show a ferromagnetic-like ordering with a T-C approximate to 105 K, followed by multiple magnetic orderings at lower temperatures. The fit of the inverse susceptibility in the paramagnetic state follows the Curie-Weiss law, where mu(eff). - 10.3 mu(B)/Dy-atom (close to theoretical value of 10.64 mu(B) for the free ion Dy3+) and a positive paramagnetic Curie temperature theta(p) - 58 K. Ni atoms are most likely to be nonmagnetic. The heat capacity also shows three peaks: a large one at 103K and two weaker at 12 and 8 K, respectively; the in-field heat capacity data corroborate these results, suggesting ferromagnetic and antiferromagnetic orderings at the temperature of 103 and 12 K, respectively. Low temperature x-ray diffraction has shown that the compound does not undergo any structural change down to 5K. (C) 2012 American Institute of Physics

36 MATERIALS SCIENCE↗

Electronic structure, magnetic properties, and mechanism of the insulator-metal transition in LaCoO{sub 3} taking into account strong electron correlations

The electronic structure of LaCoO{sub 3} at finite temperatures is calculated using the LDA+GTB method taking into account strong electron correlations and possible spin crossover upon an increase in temperature. Gap states revealed in the energy spectrum of LaCoO{sub 3} reduce the dielectric gap width upon heating; this allowed us to describe the insulator-metal transition observed in this compound at T = 500-600 K. The temperature dependence of the magnetic susceptibility with a peak at T Almost-Equal-To 100 K is explained by the Curie contribution from thermally excited energy levels of the Co{sup 3+} ion. At high temperatures, the Pauli contribution from a band electron is added and the total magnetization of LaCoO{sub 3} is considered as the sum M{sub tot} = M{sub loc} + M{sub band}. The second term describes the band contribution appearing as a result of the insulator-metal transition and facilitating the emergence of a high-temperature anomaly in the magnetic susceptibility of LaCoO{sub 3}.

36 MATERIALS SCIENCE↗

Preparations, structures and properties of heterobimetallic complexes based on tetrahydrofuran-2,3,4,5-tetracarboxylate

Transition heterobimetallic metal-organic frameworks based on tetrahydrofuran-2,3,4,5-tetracarboxylicate (FTA), namely [M(H₂O)₆][Cu₂M(FTA)₂(H₂O)₂]·4H₂O [M=Mn (1), Co (2)], and [CuZn(FTA)(H₂O)₅]·H₂O (3) have been synthesized and characterized. Single-crystal X-ray diffraction indicates that complexes 1 and 2 are isomorphic. In 1 and 2, FTA ligand links the metal ions to a 2-D wave-like negative-charged layer with a topology of (4;6²)₂(4;6³;8²)₂(6). They possess 1-D channels with [M(H₂O)₆]²⁺ and lattice water molecules enclathrated. While in the complex 3, Cu²⁺ and Zn²⁺ ions are bridged by FTA to a 2-D neutral layer structure with a (8)₂(8⁴;12²) topology. Magnetic properties of 1–3 were analyzed in connection with their structures, which show that there exist weak antiferromagnetic interactions between metal ions. - Graphical abstract: Three heterobimetallic MOFs were constructed through the size-selectivity of TFA coordination sites for different transition metal ions based on the concept of “Hard and Soft Acids and Bases”. Highlights: • Complexes 1 and 3 contain 2-D wave-like negative-charged layers. • Complex 2 is a 2-D neutral layer structure with a (8)₂(8⁴;12²) topology. • Complexes 1–3 are the first example of heterobimetallic MOFs based on FTA. • The coordination sites of FTA show size-selectivity to metal ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Inclusion of trial functions in the Langevin equation path integral ground state method: Application to parahydrogen clusters and their isotopologues

We developed and studied the implementation of trial wavefunctions in the newly proposed Langevin equation Path Integral Ground State (LePIGS) method [S. Constable, M. Schmidt, C. Ing, T. Zeng, and P.-N. Roy, J. Phys. Chem. A 117, 7461 (2013)]. The LePIGS method is based on the Path Integral Ground State (PIGS) formalism combined with Path Integral Molecular Dynamics sampling using a Langevin equation based sampling of the canonical distribution. This LePIGS method originally incorporated a trivial trial wavefunction, ψ{sub T}, equal to unity. The present paper assesses the effectiveness of three different trial wavefunctions on three isotopes of hydrogen for cluster sizes N = 4, 8, and 13. The trial wavefunctions of interest are the unity trial wavefunction used in the original LePIGS work, a Jastrow trial wavefunction that includes correlations due to hard-core repulsions, and a normal mode trial wavefunction that includes information on the equilibrium geometry. Based on this analysis, we opt for the Jastrow wavefunction to calculate energetic and structural properties for parahydrogen, orthodeuterium, and paratritium clusters of size N = 4 − 19, 33. Energetic and structural properties are obtained and compared to earlier work based on Monte Carlo PIGS simulations to study the accuracy of the proposed approach. The new results for paratritium clusters will serve as benchmark for future studies. This paper provides a detailed, yet general method for optimizing the necessary parameters required for the study of the ground state of a large variety of systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accurate coarse-grained models for mixtures of colloids and linear polymers under good-solvent conditions

A coarse-graining strategy, previously developed for polymer solutions, is extended here to mixtures of linear polymers and hard-sphere colloids. In this approach, groups of monomers are mapped onto a single pseudoatom (a blob) and the effective blob-blob interactions are obtained by requiring the model to reproduce some large-scale structural properties in the zero-density limit. We show that an accurate parametrization of the polymer-colloid interactions is obtained by simply introducing pair potentials between blobs and colloids. For the coarse-grained (CG) model in which polymers are modelled as four-blob chains (tetramers), the pair potentials are determined by means of the iterative Boltzmann inversion scheme, taking full-monomer (FM) pair correlation functions at zero-density as targets. For a larger number n of blobs, pair potentials are determined by using a simple transferability assumption based on the polymer self-similarity. We validate the model by comparing its predictions with full-monomer results for the interfacial properties of polymer solutions in the presence of a single colloid and for thermodynamic and structural properties in the homogeneous phase at finite polymer and colloid density. The tetramer model is quite accurate for q ≲ 1 (q=R{sup ^}{sub g}/R{sub c}, where R{sup ^}{sub g} is the zero-density polymer radius of gyration and R{sub c} is the colloid radius) and reasonably good also for q = 2. For q = 2, an accurate coarse-grained description is obtained by using the n = 10 blob model. We also compare our results with those obtained by using single-blob models with state-dependent potentials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Space Tug Point Design Study. Volume 3: Design Definition. Part 2: Insulation, Meteoroid Protection, Structures, Mass Properties, GSE, Reliability and Safety

A study was conducted to determine the configuration and performance of a space tug. Detailed descriptions of the insulation, meteoroid protection, primary structure, and ground support equipment are presented. Technical assessments leading to the concept selection are analyzed. The tug mass properties, reliability, and safety assessments are included.

Source record↗

Electronic Structure and Properties of Deformed Carbon Nanotubes

A theoretical framework based on Huckel tight-binding model has been formulated to analyze the electronic structure of carbon nanotubes under uniform deformation. The model successfully quantifies the dispersion relation, density of states and bandgap change of nanotubes under uniform stretching, compression, torsion and bending. Our analysis shows that the shifting of the Fermi point away from the Brillouin zone vertices is the key reason for these changes. As a result of this shifting, the electronic structure of deformed carbon nanotubes varies dramatically depending on their chirality and deformation mode. Treating the Fermi point as a function of strain and tube chirality, the analytical solution preserves the concise form of undeformed carbon nanotubes. It predicts the shifting, merging and splitting of the Van Hove singularities in the density of states and the zigzag pattern of bandgap change under strains. Four orbital tight-binding simulations of carbon nanotubes under uniform stretching, compression, torsion and bending have been performed to verify the analytical solution. Extension to more complex systems are being performed to relate this analytical solution to the spectroscopic characterization, device performance and proposed quantum structures induced by the deformation. The limitations of this model will also be discussed.

Yang, Liu↗