Search NASA⌕ Search

SEARCH · Search NASA

Results for “VAPORIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

ZIF‐8 Membrane Permselectivity Modification by Manganese(II) Acetylacetonate Vapor Treatment

Vapor-phase treatment of ZIF-8 membranes with manganese(II) acetylacetonate (Mn(acac) 2 ) allows permselectivity tuning. Propylene/propane selectivity increases from 31 to 210 after the Mn(acac) 2 treatment at 165 °C for 30 min, while selectivities increase from 14.6 to 242 for H 2 /CH 4 , from 2.9 to 38 for CO 2 /CH 4 , from 2.4 to 29 for CO 2 /N 2 , and from 2.9 to 7.5 for O 2 /N 2 , after Mn(acac) 2 treatment at 175 °C for 30 min. Stable equimolar propylene/propane mixture selectivity of 165 at ambient temperature and 4 bar equimolar feed with a propylene flux of 8.3×10 −4 mol m −2 s −1 is established. Furthermore, a control experiment excludes thermal treatment alone causing these changes. XPS analysis reveals the presence of Mn(acac) 2 on the outer surface of the vapor-treated ZIF-8 membranes while no other changes are detectable by X-ray diffraction and infrared spectroscopy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Performance of density functionals for modeling vapor liquid equilibria of CO 2 and SO 2

Vapor liquid equilibria (VLE) and condensed phase properties of carbon dioxide and sulfur dioxide are calculated using first principles Monte Carlo (FPMC) simulations to assess the performance of several density functionals, notably PBE-D3, BLYP-D3,PBE0-D3, M062X-D3, and rVV10. GGA functionals were used to compute complete vapor liquid coexistence curves (VLCCs) to estimate critical properties, while the hybrid and nonlocal vander Waals functionals were used only for computing density at a single state point due to the high computational cost. Our results show that the BLYP-D3 functional performs well in predicting VLE properties for both molecules when compared with other functionals. In the liquid phase, pair correlation functions reveal that there is not a significant difference in the location of the peak for the first solvation shell while the peak heights are different for different functionals. Altogether, theBLYP-D3 functional is a good choice for modeling VLE of acidic gases with significant environmental implications such as CO 2 and SO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multijunction Ga 0.5 In 0.5 P/GaAs solar cells grown by dynamic hydride vapor phase epitaxy

We report the development of Ga 0.5 In 0.5 P/GaAs monolithic tandem solar cells grown by dynamic hydride vapor phase epitaxy, a III-V semiconductor growth alternative to metalorganic vapor phase epitaxy with the potential to reduce growth costs. The tandem device consists of 3 components: a 1.88 eV band gap (E G ) Ga 0.5 In 0.5 P top cell, a p-Ga 0.5 In 0.5 P/n-GaAs tunnel junction, and a 1.41 eV rear heterojunction GaAs cell. The open circuit voltage (VOC) and fill factor are 2.40 V and 88.4%, respectively, indicative of high material quality. Electroluminescence measurements show that the individual V OC of the top and bottom cell are 1.40 and 1.00 V, respectively, yielding EG-voltage offsets (W OC ) of 0.48 and 0.41 V. The W OC of the top cell is higher because of an unpassivated front surface rather than the bulk material quality. The Ga 0.5 In 0.5 P top cell limits the current of this series-connected device for this reason to a short-circuit current density (JSC) of 11.16 +/- 0.15 mA/cm 2 yielding an overall efficiency of 23.7% +/- 0.3%. We show through modeling that thinning the emitter will improve the present result, with a clear pathway toward 30% efficiency with the existing material quality. This result is a promising step toward the realization of high-efficiency III-V multijunction devices with reduced growth cost.

14 SOLAR ENERGY↗

AlInP-passivated III–V solar cells grown by dynamic hydride vapor-phase epitaxy

We report the development of AlInP-passivated solar cells grown by dynamic hydride vapor-phase epitaxy (D-HVPE) with AM1.5G efficiencies of 26.0% for single-junction (1J) GaAs cells and 28.0% for GaInP/GaAs (2J) tandems. We compare the device performance of solar cells passivated with AlInP versus control cells passivated with GaInP, which has already enabled near-unity carrier collection in GaAs solar cells. 1J devices passivated with either AlInP or GaInP have an identical open-circuit voltage (V OC ) of 1.06 V and long-wavelength current collection near 95%, indicating that both window materials provide a similar degree of passivation. Adding AlInP passivation to each solar cell structure improves the current collection by 1.3 and 1 mA/cm 2 for the 1J and 2J, respectively. The AlInP also results in a top cell V OC boost of ~40 mV relative to a tandem device passivated only by a thin, highly doped GaInP emitter. Secondary-ion mass spectrometry measurements indicate that although O and Si both incorporate in the AlInP window, they do not appear in the subsequently grown absorber layers and do not impact its ability to passivate the front surface. We expect that these achievements, along with continued optimization, will enable parity of hydride vapor-phase epitaxy (HVPE)-grown device efficiencies with state-of-the-art devices grown by other epitaxial methods in the near future.

14 SOLAR ENERGY↗

Absolute integrated intensities of vapor-phase hydrogen peroxide (H202) in the mid-infrared at atmospheric pressure

We report quantitative broadband infrared spectra of vapor-phase hydrogen peroxide (H2O2) with all spectra pressure broadened to atmospheric pressure. The spectra were generated by flowing a concentrated solution (83 weight%) of H2O2 into a gently heated disseminator and diluting with a flow of pure nitrogen carrier gas. The water vapor lines were subtracted from the resulting spectra to yield the spectrum of pure H2O2. Comparison with previous results for the ν6 band strength (including hot bands) compares favorably with the results of Klee et al. [(1999) J. Mol. Spectr. 195, 154] as well as HITRAN. The present results are 433 and 467 cm-2 atm-1 (±8% and ±3% at 298 and 323 K, respectively) for the band strength, matching well the Klee value (S = 467 cm-2 atm-1 at 296 K) for the integrated band. Other bands in the 520-7500 cm-1 interval and their potential for atmospheric monitoring are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulation of the Dynamics of Isothermal Growth of Single-Layer Graphene on a Copper Catalyst in the Process of Chemical Vapor Deposition of Hydrocarbons

A new kinetic model of isothermal growth of single-layer graphene on a copper catalyst as a result of the chemical vapor deposition of hydrocarbons on it at a low pressure has been developed on the basis of in situ measurements of the growth of graphene in the process of its synthesis. This model defines the synthesis of graphene with regard for the chemisorption and catalytic decomposition of ethylene on the surface of a copper catalyst, the diffusion of carbon atoms in the radial direction to the nucleation centers within the thin melted near-surface copper layer, and the nucleation and autocatalytic growth of graphene domains. It is shown that the time dependence of the rate of growth of a graphene domain has a characteristic asymmetrical bell-like shape. The dependences of the surface area and size of a graphene domain and the rate of its growth on the time at different synthesis temperatures and ethylene concentrations have been obtained. Time characteristics of the growth of graphene domains depending on the parameters of their synthesis were calculated. The results obtained can be used for determining optimum regimes of synthesis of graphene in the process of chemical vapor deposition of hydrocarbons on different catalysts with a low solubility of carbon.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermal Response of a Lithium Vapor Divertor to Cyclical Operation

The lithium vapor divertor concept is being developed as a method to achieve detached divertor conditions in a tokamak while minimizing impurity radiation losses from the core plasma. SOLPS-ITER modeling has previously been used to identify some of the geometric constraints and required lithium evaporation rate of a lithium vapor divertor in a medium-sized tokamak during steady-state operation. Here an updated conceptual design based on these operating requirements is introduced and the thermal response of the system is modeled during cyclical operation, consistent with operation in a short-pulse tokamak. Controllability of the temperature of the lithium capillary porous system (CPS) is achieved by adopting a design where there is no line-of-sight for radiation from the plasma to reach the heated CPS surface. Operational strategies to minimize the amount of lithium evaporated between plasma discharges while achieving steady evaporation rates during plasma discharges are discussed and modeled here. The optimal feedforward control strategy demonstrated in this work is to ramp up the temperature of the evaporator as quickly as possible immediately before a plasma discharge and then reduce the heating to match the desired steady-state net evaporation rate just before the plasma discharge begins, allowing the thermal inertia of the system to stabilize the evaporation rate during the first second of the plasma discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of Organo-Modified Clay Addition and Temperature on the Water Vapor Barrier Properties of Polyhydroxy Butyrate Homo and Copolymer Nanocomposite Films for Packaging Applications

Polymer nanocomposites, based on bacterial biodegradable thermoplastic polyester, poly(hydroxy-butyrate) (PHB), poly(hydroxyl-butyrate-co-hydroxy-valerate) (PHBHV), and commercial organo-modified montmorillonite (OMMT-Cloisite 10A) were prepared by solution casting method. This work aims to investigate the effect of Cloisite 10A type clay addition on the water vapour permeability properties of PHB/OMMT, and PHBHV/OMMT nanobiocomposite films. Temperature dependence of water vapor permeabilities of the films were also evaluated at various temperatures, and semi empirical permeability models were used to predict the permeability of polymer systems as a function of clay concentration and aspect ratio of nanoplates. Moreover, thermal, optical, and mechanical properties of the composites were examined by using varieties of techniques including differential scanning calorimeter (DSC), thermogravimetric analyzer (TGA), scanning electron microscope (SEM), and thin-film X-ray diffractometer (TF-XRD) respectively. Test results indicated that addition of highly intergallery swollen Cloisite 10A to the PHB/PHBHV, reduced the water vapor permeability up to 41 and 25% compared to native PHB and PHBHV films, respectively. Regarding the all mechanical properties measured, the maximum improvement was achieved for 3 wt% clay loaded samples for both PHB and PHBHV polymer composites. An increase of about 152 and 73% in tensile strength and of 77 and 18% in strain at break was achieved for PHB and PHBHV polymers, respectively. As a result of X-ray diffraction analysis, exfoliated structure was achieved at low clay loaded sample (1% w/w), however at higher concentration (3% w/w) the structure found as intercalated. Therefore, it is an evident that enhancement of characteristic properties highly depend on the dispersion level of clay particles in polymer matrix. The results obtained in this study show the feasibility of improvement of the properties of PHB based polymers with incorporation of nanoclay.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Water Vapor Effects on the Oxidation Behavior of Fe-Cr and Ni-Cr Alloys in Atmospheres Relevant to Oxy-fuel Combustion

The oxidation behavior of a number of Fe–Cr- and Ni–Cr-based alloys was studied in atmospheres relevant to oxyfuel combustion at 650 °C. Oxidation was greatly enhanced in ferritic model alloys exposed in low p(O{sub 2}) CO{sub 2} + 30%H{sub 2}O and Ar + 30%H{sub 2}O gases. Rapidly growing iron oxides appear to be porous and gas permeable. Transition from non-protective to protective oxidation occurs on alloys with higher Cr contents between 13.5 and 22 wt% in H{sub 2}O. Excess oxygen, usually found in the actual oxyfuel combustion environments, disrupts the selective oxidation of Fe–Cr alloys by accelerating vaporization of early-formed Cr{sub 2}O{sub 3} in combination with accelerated chromia growth induced by the H{sub 2}O. Rapid Cr consumption leads to the nucleation and rapid growth of iron oxides. On the contrary, Ni–Cr alloys are less affected by the presence of H{sub 2}O and excess O{sub 2}. The difference between Fe–Cr and Ni–Cr alloys is not clear but is postulated to involve less acceleration of chromia growth by water vapor for the latter group of alloys.

36 MATERIALS SCIENCE↗

Carbothermic Reduction Kinetics of Phosphorous Vaporization from Tri-calcium Phosphate (TCP) Under Microwave Rapid Heating With/Without the Presence of Fe{sub 3}O{sub 4}

The kinetics of vapor phase dephosphorization from tri-calcium phosphate (TCP) by carbothermic reduction was studied with and without the presence of Fe{sub 3}O{sub 4}. Microwave heating was utilized to obtain large variations in the heating rate (HR). In the reduction of TCP alone, the phosphorous removal fraction (RF; equal to ∆P{sub 2}O{sub 5}/P{sub 2}O{sub 5}{sup 0}, where ∆P{sub 2}O{sub 5} is the weight change and P{sub 2}O{sub 5}{sup 0} is the P{sub 2}O{sub 5} weight before heating) decreased as the HR increased. In other words, a shorter residence time at a high temperature resulted in a smaller reduction fraction of TCP. An apparently third-order reaction was postulated to account for the kinetics using a fitting simulation based on the additive law of the reaction progress. On the other hand, the phosphorous removal (dephosphorization) rate (RR; equal to ∆P{sub 2}O{sub 3}/t{sub MW}, where t{sub MW} is the microwave heating time period) increased as the HR increased above 1200 °C. The reduction ratio of Fe{sub 3}O{sub 4} above 1100 °C is higher than 97 pct regardless of the heating rate. The reduction of TCP in the presence of Fe{sub 3}O{sub 4} showed that RF increased slightly with increasing HR despite a shorter residence time at a high temperature. The RR also increased with the HR even though RF decreased to half of the values observed in the cases without Fe{sub 3}O{sub 4} for temperatures above 1200 °C. The practicality and optimal operation conditions of phosphorus vapor removal were discussed.

36 MATERIALS SCIENCE↗

Bronze Alloy Development for Zinc Vapor Capture

After gamma-emitting 65 Zinc was detected in a vacuum pumping system contained in a tritium glovebox, a series of experiments were undertaken to develop a method and material to trap zinc vapors in an area that is more suitable for preventing dose to workers. In this study, bronze alloys with 0–30% tin were prepared using a powder metallurgical process and exposed to three levels of zinc vapors. Furthermore, all of the alloys demonstrated acceptable zinc gettering capacity; however, low tin content bronzes are considered for further testing.

36 MATERIALS SCIENCE↗

Effect of neutron beamline irradiation on hydrogen equilibrium vapor pressure over hydrided Zircaloy-4

Here, the effect of neutron irradiation on the hydrogen equilibrium vapor pressure over hydrided samples of nickel-plated Zircaloy-4 was evaluated at the Washington State University Research Reactor’s epithermal beamline facility. To enable this study, a measurement capability was designed and assembled to obtain low pressure (<0.1 Pa) measurements over the temperature range of interest (i.e., ~300° - 400°C). Measurement results were in good agreement with tends extrapolated from previous data obtained at higher temperatures as well as recent thermodynamic data. No irradiation enhancement of vapor pressure was observed under the incident flux of epithermal neutrons over this temperature range.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Creating values from wastes: Producing biofuels from waste cooking oil via a tandem vapor-phase hydrotreating process

Here, this study is focused on producing biofuels from waste oils via a tandem vapor-phase hydrotreating process in a pressurized two-stage fixed bed reactor over a bifunctional Ni/Al 2 O 3 -SiO 2 catalyst under 0.25 MPa H 2 . A 100% hydrodeoxygenation efficiency both in liquid and gas products was observed, yielding 83.9 wt% C 5 -C 19 n-alkanes which corresponds to a 7.4-fold increase compared with that obtained from non-catalytic conversion. The hydrodeoxygenation mechanism of waste cooking oil in the catalytic tandem hydrotreating process induced by Ni/Al 2 O 3 -SiO 2 was proposed. The hydropyrolysis temperature in the first reactor, hydrogenation temperature in the second reactor, reaction pressure, catalyst to waste cooking oil mass ratio, and gas hourly space velocity (GHSV) was optimized at 550 °C, 300 °C, 0.25 MPa, 3, and 56 s -1 , respectively. The application potential of this cascade vapor-phase hydrotreating process was evaluated by employing different waste oils such as palm kernel oil, woody oil (swida wilsoniana), soapstock, and waste lubricating oil as feedstock, giving C 5 to C 19 n-alkane yields ranging from 21.6 to 87.5 wt%. This work provides a novel and promising approach to upcycle waste oils into upgraded biofuels compared with conventional catalytic pyrolysis.

09 BIOMASS FUELS↗

Exploring driving forces for length growth in graphene nanoribbons during chemical vapor deposition of hydrocarbons on Ge(0 0 1) via kinetic Monte Carlo simulations

Graphene grown slowly on Ge(0 0 1) using chemical vapor deposition of hydrocarbons leads to high-aspect ratio graphene nanoribbons with smooth edges and a technologically relevant band gap at room temperature; however, the driving forces leading to one-dimensional growth of such graphene crystals are not well understood. Here, we combine a lattice kinetic Monte Carlo approach based on steps in graphene growth and experimental measurements to study the growth of graphene nanoribbons via chemical vapor deposition on Ge(0 0 1). To identify potential reasons for growth of graphene as anisotropic ribbons, we study the impact of anisotropy in various growth parameters on the resulting graphene crystals. Comparing our model with experimental measurements indicates that anisotropy in the stabilization of a graphene precursor species bound to the graphene edge is the most likely reason why high aspect ratio graphene ribbons with smooth edges grow on Ge(0 0 1). Using the growth model developed here, we reproduce experimental trends in the synthesis of graphene nanoribbons on Ge(001) and arrive at an intuitive picture for their growth. These insights shed light on the driving forces governing this highly anisotropic regime of crystal growth.

36 MATERIALS SCIENCE↗

Effect of ZSM-5 acidity on aromatic product selectivity during upgrading of pine pyrolysis vapors

The impact of catalyst acidity on the selectivity of upgraded biomass pyrolysis products was studied by passing pine pyrolysis vapors over five ZSM-5 catalysts of varying acidity at 500 degrees C. The SiO 2 -to-Al 2 O 3 ratio (SAR) of the ZSM-5 zeolite was varied from 23 to 280 to control the acidity of the catalyst and the composition of upgraded products. The upgraded product stream was analyzed by GCMS. Additionally, catalysts were characterized using temperature programmed desorption, diffuse-reflectance FTIR spectroscopy, N 2 physisorption, and X-ray diffraction. The results showed that the biomass pyrolysis vapors were highly deoxygenated to form a slate of aromatic hydrocarbons over all of the tested ZSM-5 catalysts. As the overall acidity of the ZSM-5 increased the selectivity toward alkylated (substituted) aromatics (e.g., xylene, dimethyl-naphthalene, and methyl-anthracene) decreased while the selectivity toward unsubstituted aromatics (e.g., benzene, naphthalene, and anthracene) increased. Additionally, the selectivity toward polycyclic aromatic compounds (2-ring and 3-ring) increased as catalyst acidity increased, corresponding to a decrease in acid site spacing. The increased selectivity toward less substituted polycyclic aromatic compounds with increasing acidity is related to the relative rates of cyclization and alkylation reactions within the zeolite structure. As the acid site concentration increases and sites become closer to each other, the formation of additional cyclization products occurs at a greater rate than alkylated products. The ability to adjust product selectivity within 1-, 2-, and 3-ring aromatic families, as well as the degree of substitution, by varying ZSM-5 acidity could have significant benefits in terms creating a slate of upgraded biomass pyrolysis products to meet specific target market demands.

09 BIOMASS FUELS↗

Development of ceria-supported metal-oxide (MO x /CeO 2 ) catalysts via a one-pot chemical vapor deposition (OP-CVD) technique: Structure and reverse water gas shift reaction study

Current synthesis techniques for metal oxide (MO x )-supported catalysts have certain limitations of undesired target loading, ineffective dispersion of active species over the surface, uncontrolled particle size of active species, and complicated synthesis steps. Here, we developed a one-pot chemical vapor deposition (OP-CVD) methodology; by using which a solid metal precursor forms a vapor in a controlled condition and gets supported over the surrounding matrix. The theoretical stability followed by experimental validation using TGA is crucial for selecting the metal precursors. Three simple steps viz. premixing, dispersion, and rapid fixation by calcination are involved in the catalyst development via the OP-CVD approach. This study solely focused on the synthesis of 3d transition MO x over ceria support. The physicochemical characterizations of the prepared catalysts were performed by XRD, ICP-OES, SEM-EDX, CO pulse chemisorption, XANES, and EXAFS analyses to understand the crystal structure of involved species, target metal loading, dispersion, and particle size and prove the feasibility and viability of OP-CVD. The prepared catalysts were further tested for reverse water gas shift (RWGS) reaction to link their structural information with activity. The RWGS reaction data showed that the CO activity and CO selectivity were metal - and metal precursor-dependent. Higher CO activity of > 0.1 mol/h g-cat was observed for Cu and Co-based catalysts, with CO selectivity of ~100 %. This study provides an opportunity to produce efficient supported catalysts in a convenient way, providing effective catalytic activity.

36 MATERIALS SCIENCE↗

Pore-size resolved water vapor adsorption kinetics of white cement mortars as viewed from proton NMR relaxation

The dynamic pore structure of partially saturated cement-based material is rather essential to quantify its mass transport and many other properties. To clarify the influence of water removal and re-entry, the low-field nuclear magnetic resonance technique is employed to characterize the pore structure of two white cement mortars during isopropanol exchange and water vapor adsorption kinetics. It is found that, after isopropanol replacement the pore structures of mortars become remarkably coarsen due to the significant collapse of C-S-H interlayer pores, which are only partly reversible at water re-saturation. Consistently, water vapor adsorption is not a simple progressively filling process from finer to coarser pores, but accompanied by continuous expansion of C-S-H gel adsorbing water in priority. Furthermore, the irrecoverable contraction of C-S-H gel is the physical root of irreversible shrinkage. The smaller BET surface area using nitrogen than water is also attributed to the collapse of interlayer pores after drying.

36 MATERIALS SCIENCE↗