Search NASA⌕ Search

SEARCH · Search NASA

Results for “algorithmic development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

On the dynamics of space manipulators using the Virtual Manipulator, with applications to path planning

Robotic manipulators carried by future spacecraft are expected to perform important tasks in space, such as the servicing of satellites. However, the performance of these systems could be severely degraded by dynamic disturbances to the spacecraft caused by manipulator motions. This paper presents a method for representing the dynamics of space manipulator systems using the recently developed Virtual Manipulator (VM) concept. This representation is then applied to develop algorithms which can be used to plan manipulator motions that minimize disturbances of the spacecraft.

Vafa, Z.↗

Numerical aspects of computing high Reynolds number flows on unstructured meshes

An edge-data structure describing a mesh edge-wise given the vertices of each edge and neighboring cell information is used developing algorithms for the Navier-Stokes equations on triangular meshes. Edge formulas for the Galerkin and finite-element discretization of gradient, divergence, Hessian, and Laplacian operators are derived. A simple edge formula is derived for the discretization of the Laplacian operator, where precise theoretical conditions for a discrete maximum principle can be ascertained. Practical issues associated with solving the Navier-Stokes equations on unstructured meshes are addressed, along with issues concerning the generation of highly stretched triangular meshes and the modeling of turbulence on unstructured meshes. A turbulence modeling strategy is proposed, and numerical results for a high-Reynolds-number flow about single- and multielement airfoils are discussed.

Barth, Timothy J.↗

Parallel unstructured grid generation

A parallel unstructured grid generation algorithm is presented and implemented on the Hypercube. Different processor hierarchies are discussed, and the appropraite hierarchies for mesh generation and mesh smoothing are selected. A domain-splitting algorithm for unstructured grids which tries to minimize the surface-to-volume ratio of each subdomain is described. This splitting algorithm is employed both for grid generation and grid smoothing. Results obtained on the Hypercube demonstrate the effectiveness of the algorithms developed.

Loehner, Rainald↗

A computational model for the analysis of diffusive binary alloy solid/liquid phase change energy transport

A model is presented for the prediction of solid/liquid, binary alloy, phase change energy transport. The model incorporates only one-dimensional, diffusive transport of both energy and species but is not inherently limited in any way to such a restriction. The model incorporates a previously developed algorithm for single constituent phase change energy transport and is applied to the energy transport as well as the species transport aspects of the problem. The model is applied to four example cooling problems and is shown to perform exceedingly well from an algorithmic point of view.

Schneider, G. E.↗

Fe II emission lines. I - Chromospheric spectra of red giants

A 'difference filtering' algorithm developed by Ayers (1979) is used to construct high-quality high-dispersion long-wavelength IUE spectra of three giant stars. Measurements of all the emission lines seen between 2230 and 3100 A are tabulated. The emission spectrum of Fe II is discussed in comparison with other lines whose formation mechanisms are well understood. Systematic changes in the Fe II spectrum are related to the different physical conditions in the three stars, and examples are given of line profiles and ratios which can be used to determine conditions in the outer atomspheres of giants. It is concluded that most of the Fe II emission results from collisional excitation and/or absorption of photospheric photons at optical wavelengths, but some lines are formed by fluorescence, being photoexcited by other strong chromospheric lines. Between 10 and 20 percent of the radiative losses of Fe II arise from 10 eV levels radiatively excited by the strong chromospheric H Ly-alpha line.

Judge, P. G.↗

Mathematical Model For Engineering Analysis And Optimization

Computational support for engineering design process reveals behavior of designed system in response to external stimuli; and finds out how behavior modified by changing physical attributes of system. System-sensitivity analysis combined with extrapolation forms model of design complementary to model of behavior, capable of direct simulation of effects of changes in design variables. Algorithms developed for this method applicable to design of large engineering systems, especially those consisting of several subsystems involving many disciplines.

Sobieski, Jaroslaw↗

Spectroscopy and multivariate analyses applications related to solid rocket nozzle bondline

Chemical composition and molecular orientation define the properties of materials. Information related to chemical composition and molecular configuration is obtained by various forms of spectroscopy. Software algorithms developed for multivariate analyses, expert systems, and Artificial Intelligence (AI) are used to conduct repetitive operations. The techniques are believed to be of particular significance toward achieving TQM objectives. The objective was to obtain information related to the quality of the bondline in the solid rocket motor, SRM, nozzle. Hysol 934 NA, a room temperature curing epoxide resin, is used as the bonding agent. A good bond requires that the adhesive be placed on a properly prepared metal surface, the adhesives Part A and B be mixed in appropriate ratio from material within shelf life specifications. Spectroscopic data was obtained for surfaces prepared according to specifications, contaminated metal surfaces, samples of the epoxide adhesive at times that represent shelf aging from 3 months to 2 years, several mix ratio of A to B, and curing material. Temperature was found to be a significant factor. The study concentrated on pot life and mix ratio.

Arendale, W. F.↗

Computational Fluid Dynamics

This collection of papers was presented at the Computational Fluid Dynamics (CFD) Conference held at Ames Research Center in California on March 12 through 14, 1991. It is an overview of CFD activities at NASA Lewis Research Center. The main thrust of computational work at Lewis is aimed at propulsion systems. Specific issues related to propulsion CFD and associated modeling will also be presented. Examples of results obtained with the most recent algorithm development will also be presented.

Source record↗

Impact of diet on the design of waste processors in CELSS

The preliminary results of a design analysis for a waste processor which employs existing technologies and takes into account the constraints of human diet are presented. The impact of diet is determined by using a model and an algorithm developed for the control and management of diet in a Controlled Ecological Life Support System (CELSS). A material and energy balance model for thermal oxidation of waste is developed which is consistent with both physical/chemical methods of incineration and supercritical water oxidation. The two models yield quantitative analysis of the diet and waste streams and the specific design parameters for waste processors, respectively. The results demonstrate that existing technologies can meet the demands of waste processing, but the choice and design of the processors or processing methods will be sensitive to the constraints of diet. The numerical examples are chosen to display the nature and extent of the gap in the available experiment information about CELSS requirements.

Waleh, Ahmad↗

The evolution of synthetic aperture radar systems and their progression to the EOS SAR

The authors describe the evolution of the spaceborne imaging radar starting with the Seasat SAR, through the SIR-A, SIR-B, and SIR-C/X-SAR missions, to the Earth Observing System (EOS) SAR which is scheduled for launch as part of EOS in the late 1990s. A summary of the planned international missions, which may produce a permanent active microwave capability in space starting as early as 1991, is also presented, along with a description of the airborne systems which will be essential to the algorithm development and long-term calibration of the spaceborne data. A brief summary of the planetary missions utilizing SAR and a comparison of their imaging capabilities with those available on Earth are presented.

Way, Jobea↗

The Automated Logistics Element Planning System (ALEPS)

The design and functions of ALEPS (Automated Logistics Element Planning System) is a computer system that will automate planning and decision support for Space Station Freedom Logistical Elements (LEs) resupply and return operations. ALEPS provides data management, planning, analysis, monitoring, interfacing, and flight certification for support of LE flight load planning activities. The prototype ALEPS algorithm development is described.

Schwaab, Douglas G.↗

Nested rain cell contour statistics derived from radar measurements in the mid-Atlantic coast of the United States

During a period spanning more than 5 years, a series of low elevation rain radar measurements encompassing 17 rain days were systematically executed in the mid-Atlantic coast of the United States. Drop size distribution measurements with a nearby disdrometer were also acquired during the same rain days. The drop size data were utilized to convert the radar reflectivity factors to estimated rain rates for the respective rain days of operation. Applying developed algorithms to the radar and disdrometer data, 'core' values of rain intensities and nested families of rain rate isopleths enveloping them were identified and their equi-circle diameters were statistically analyzed.

Goldhirsh, Julius↗

Three-dimensional deformation analysis of two-phase dislocation substructures

Three-dimensional deformation analysis of two-phase dislocation substructures was carried out, extending the Qian and Fan (1991) approach to 3D stress-strain fields by using the Budiansky and Wu (1962) criterion for strain compatibility between the 'hard' and 'soft' regions. The result is a rate-dependent viscoplastic theory, named the dislocation substructure viscoplasticity (DSV), which incorporates a self-consistent effect of dislocation substructure on material response. An algorithm developed for numerical implementation of the DSV theory is presented.

Freed, Alan D.↗

Computational aerodynamics - The next generation

Continued advances in the various elements that comprise the field of computational fluid dynamics (CFD) are promoting a radically different approach to the aerodynamic design and analysis of aerospace vehicles and systems. The elements of CFD generally include numerical algorithm development, transition and turbulence modeling, surface modeling, and grid generation, scientific visualization and validation methodologies. This paper discusses the research progress and prospects for the future in each of these elements within NASA's CFD and Experimental Validation Program. The applicability of computational methods for the purposes of understanding complex flow phenomena, exploring aerodynamic concepts, and providing vehicle-design input is also addressed.

Hessenius, Kristin A.↗

Numerical simulations using a dynamic solution-adaptive grid algorithm, with applications to unsteady internal flows

An investigation into the numerical simulation of unsteady flows is undertaken using a two-stage Runge-Kutta scheme coupled with the dynamic solution-adaptive grid algorithm developed by the authors. The inviscid fluxes are described by a modified Advective Upwind Split Method to eliminate the need for artificial dissipation. A well-documented numerical example containing moving discontinuities is presented that demonstrates the ability of the coupled grid/solver scheme to accurately capture unsteady flowfield phenomena. Applications are to a typical inlet diffuser configuration at Mach 3.0 with excessive back pressure inducing inlet unstart.

Benson, Rusty A.↗

The algebraic decoding of the (41, 21, 9) quadratic residue code

A new algebraic approach for decoding the quadratic residue (QR) codes, in particular the (41, 21, 9) QR code is presented. The key ideas behind this decoding technique are a systematic application of the Sylvester resultant method to the Newton identities associated with the code syndromes to find the error-locator polynomial, and next a method for determining error locations by solving certain quadratic, cubic and quartic equations over GF(2 exp m) in a new way which uses Zech's logarithms for the arithmetic. The algorithms developed here are suitable for implementation in a programmable microprocessor or special-purpose VLSI chip. It is expected that the algebraic methods developed here can apply generally to other codes such as the BCH and Reed-Solomon codes.

Reed, Irving S.↗

Radiative-hydrodynamical simulations of X-ray burst-induced accretion disk coronae

A fully self-consistent radiative hydrodynamical algorithm developed earlier is used to study the 'steady' state coronae in order to simulate the response of the evaporated outflow to a time-dependent irradiation of the disk's surface. It is found that the burst definition is altered at both low and high inclination angles i. At i greater than or approximately equal to 45 deg, the detectable flux is enhanced (as much as 50 percent) by X-rays scattered into the line of sight from the radiation propagation through the corona, and (greater than or approximately equal to 30 percent) by X-rays reflected off the corona when i is less than or approximately equal to 45 deg.

Mella, Fulvio↗

Compensating For Computational Delay In Flight Simulation

Computer-generated imagery processed with corrective phase shifts at lower frequencies. Algorithm developed from transfer functions predicting lower-frequency components of response of aircraft short time into future. Effects of delay at lower frequencies counteracted by introducing compensatory phase shifts, opposite those caused by delay, into signals driving computer-generated imagery.

Mcfarland, Richard E.↗