Search NASA⌕ Search

SEARCH · Search NASA

Results for “aqueous processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Non-thermal atmospheric pressure plasma–liquid synthesis of organic acids in aqueous solution from carbon monoxide

This work aims at understanding the conversion of CO to organic acids, namely oxalic acid and formic acid, using non-thermal atmospheric pressure plasma over aqueous solutions. CO exhibited significantly higher conversion to organic acids (more than 15×) compared to CO 2 under the same reaction conditions. The result bolsters a proposed two-step process for CO 2 fixation, whereby CO 2 is first converted to CO, and then CO is converted to organic acids. The organic acids produced from CO are intermediates in the water–gas shift (WGS) reaction of CO in the presence of an aqueous solution to dissolved CO 2 and hydrogen gas. Based on a simple thermodynamic analysis, the organic acid yield was increased by lowering the plasma–liquid reaction temperature using an ice bath to cool the reaction flask. The composition of the organic acids could be varied by changing the pH of the solution. Oxalate was formed in higher concentrations with increasing solution pH above the pK a of the radical species (CO 2 )˙ − . Below the pK a value, formate was the exclusive organic acid formed. The production of formate has a rather weak pH dependence but is enhanced slightly at a basic pH above 10. Furthermore, at basic pH, the effect of electrolyte concentration comes into play. Higher electrolyte concentrations, leading to shorter electrolyte Debye lengths, resulted in lowered organic acid yields. The highest yields of organic acids obtained in our system were 122 mg L −1 for oxalate and 77 mg L −1 for formate at an optimum 1 mM NaOH concentration in the starting solution. This work is a successful pioneering example of CO to organic acids conversion using non-thermal plasmas, which opens the pathway for a promising two-step conversion process of CO 2 to organic acids.

Sudagar, Alcina Johnson [Washington University in ↗

Solution-based approaches for making high-density sodalite waste forms to immobilize spent electrochemical salts

Three different solution-based approaches were taken to make sodalite minerals as a host for a mixed salt simulating the waste generated during the electrochemical separations process of nuclear fuel reprocessing that contains alkali, alkaline earth, and lanthanide chlorides plus trace iodine and actinides. All of the approaches included an aqueous solution of mixed chlorides (simulated waste) but the other reactants varied: (1) Al(OH)3 + NaOH + CS, (2) NaAlO2 + CS, and (3) Al2Si2O7 + NaOH, (CS = colloidal silica). The products were dried, ground, pressed into pellets, fired (650–950 °C), and characterized. Both 5 and 10 mass% of a Si-Na-B glass binder were introduced at different stages in the process. Route (2) proved the most successful at producing high sodalite fractions (up to 100%) with minimal glass binder additions and showed high consolidation potential (up to 91.4% of theoretical density). Detailed comparisons are provided of the results.

electrochemical↗

Quantum chemical modeling of possible reactions of mononuclear iron nitrosyl complex [Fe(SC(NH{sub 2}){sub 2}){sub 2}(NO){sub 2}]Cl•H{sub 2}O in an aqueous solution

Possible reactions of the mononuclear iron nitrosyl complex [Fe(SC(NH{sub 2}){sub 2}){sub 2}(NO){sub 2}]Сl•H{sub 2}O in an aqueous solution were studied using quantum chemical modeling. The electronic structures of the possible intermediates were examined by the NBO and AIM methods. The substitution of the thio ligand in the iron—sulfur nitrosyl complex by a water molecule and the formation of dimeric intermediate complexes were found to facilitate the NO-donation process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of Novel Adsorbent Prepared by Mucor hiemalis Biomass Impregnated with Calcium Alginate for Removal of Sr{sup 2+} from Aqueous Solutions

In this research, a novel biosorbent was prepared by Mucor hiemalis biomass combined with calcium alginate (Mucor hiemalis/Alg-Ca). The dead biomass was entrapped into alginate gel by curing method in the presence of Ca{sup 2+} ions. The synthesized biosorbent characterized by XRD, EDAX, BET, FTIR, and SEM techniques was used for removal of Sr{sup 2+} from aquatic streams under various experimental conditions and the optimized adsorption capacity of 140 mg g{sup −1} was obtained. The selectivity of the adsorbent towards Sr{sup 2+} studied in the presence of Na{sup +}, Cs{sup +}, Ca{sup 2+} and Mg{sup 2+} was reasonably high. The adsorption process was kinetically fast and the equilibrium was established within 60 min, and followed the pseudo-second order kinetics model. The equilibrium data was well described by Langmuir isotherm model. The thermodynamics parameters (∆G°, ∆H° and ∆S°) of the process were determined. Positive ∆H° and negative ∆G° were indicative of the endothermic and spontaneous nature of the adsorption process. Graphical Abstract: .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal synthesis, characterization, and photocatalytic properties of Zn{sub 2}SnO{sub 4}

Nanosized Zn{sub 2}SnO{sub 4} (ZTO) particles were successfully synthesized by a simple hydrothermal process in water/ethylene glycol mixed solution using amines (ethylamine, n-butylamine, n-hexylamine, and n-octylamine) as mineralizer. The products were characterized by X-ray diffractions (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N{sub 2} adsorption. The results indicated that the hydrothermal conditions, such as alkaline concentration (n-butylamine), reaction temperature, solvent composition, and the kind of amines, had an important influence on the composition, crystallinity, and morphology of the product. The as-synthesized ZTO samples exhibited high activities and durabilities for photodegradation of methyl orange and the activities were mainly affected by the crystallinities of the samples. A hexagonal-shaped ZTO (H-ZTO) sample was prepared in 0.53 M of n-butylamine solution at 180 deg. C for 20 h and its optical properties were characterized by UV-Vis diffuse reflectance and Photoluminescence (PL) spectra. Furthermore, the photocatalytic H{sub 2} evolution reaction from ethanol aqueous solution over H-ZTO was also investigated. - Graphical abstract: Nanosized Zn{sub 2}SnO{sub 4} (ZTO) was successfully synthesized by hydrothermal process. Photocatalytic test showed that the samples exhibited high activity and durability for photodegradation of methyl orange (MO) and photocatalytic production H{sub 2} from ethanol aqueous solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Co-processing catalytic fast pyrolysis oil in an FCC reactor

Here, studies of co-processing catalytic fast pyrolysis (CFP) oil with vacuum gas oil (VGO) are conducted in a Davison Circulating Riser (DCR). The CFP oil (CFPO) for this study was produced by upgrading fast-pyrolysis vapors from pine in an ex-situ fixed-bed reactor. CFPOs were co-processed at up to a volume fraction of 0.05 with VGO at 521 degrees C and 257 kPa. The yields of oil, aqueous phase, tail gas, and coke were measured. The amount of coke was determined from the carbon containing components in the regenerator flue gas. A compositional analysis was conducted with gas chromatography and elemental analyzers. The organic liquids were distilled into gasoline, jet-fuel, diesel, and resid fractions. A biocarbon analysis was conducted on the organic phase and its individual boiling-point fractions. The results show a small decrease in liquid yield and a generally increased gas yield when co-processing CFPO with VGO. The experiments showed that 75%-100% of biocarbon is incorporated into liquid fuels relative to fossil carbon, depending on catalyst and CFPO. The measurements indicate that cracked CFPO components are predominantly included in the jet-fuel and diesel fractions. A techno-economic analysis (TEA) estimated the minimum fuel selling price (MSFP) for fuel-range products derived from FCC co-processing of CFPO at 24 to 29 $\$$/GJ ($\$$2.90 to $\$$3.50 per gasoline-gallon equivalent; GGE) at a yield of 4.87-7.14 GJ/t(biomass) or 40-58 GGE/t.

09 BIOMASS FUELS↗

Fabrication and morphology control of BaWO{sub 4} thin films by microwave assisted chemical bath deposition

Highly crystallized barium tungstate (BaWO{sub 4}) thin films with dumbbell-like, kernel-like, bowknot-like and cauliflower-like microstructure were synthesized from an aqueous solution containing barium nitrate, ethylenediamine tetraacetate acid disodium and sodium tungstate, via mild microwave assisted chemical bath deposition process. The resulting BaWO{sub 4} films with different morphologies were characterized by X-ray diffraction spectrum, scanning electron microscope, Raman and photoluminescence spectra. The results indicate that the morphologies of final products significantly depend on the reaction conditions including the reaction time, the initial concentration of precursor reagent and the physicochemical characteristics of the substrates. Furthermore, the oriented aggregation mechanism is proposed as a possible formation mechanism of the films with specific morphologies. - Graphical abstract: Highly crystallized BaWO{sub 4} thin films with controllable morphologies have been synthesized via mild microwave assisted chemical bath deposition. The oriented aggregation mechanism has been proposed as the possible formation mechanism of specific films.

36 MATERIALS SCIENCE↗

Design principles for high–pressure force fields: Aqueous TMAO solutions from ambient to kilobar pressures

Accurate force fields are one of the major pillars on which successful molecular dynamics simulations of complex biomolecular processes rest. They have been optimized for ambient conditions, whereas high-pressure simulations become increasingly important in pressure perturbation studies, using pressure as an independent thermodynamic variable. Here, we explore the design of non-polarizable force fields tailored to work well in the realm of kilobar pressures – while avoiding complete reparameterization. Our key is to first compute the pressure-induced electronic and structural response of a solute by combining an integral equation approach to include pressure effects on solvent structure with a quantum-chemical treatment of the solute within the embedded cluster reference interaction site model (EC-RISM) framework. Next, the solute’s response to compression is taken into account by introducing pressure-dependence into selected parameters of a well-established force field. In our proof-of-principle study, the full machinery is applied to N,N,N-trimethylamine-N-oxide (TMAO) in water being a potent osmolyte that counteracts pressure denaturation. EC-RISM theory is shown to describe well the charge redistribution upon compression of TMAO(aq) to 10 kbar, which is then embodied in force field molecular dynamics by pressure-dependent partial charges. The performance of the high pressure force field is assessed by comparing to experimental and ab initio molecular dynamics data. Beyond its broad usefulness for designing non-polarizable force fields for extreme thermodynamic conditions, a good description of the pressure-response of solutions is highly recommended when constructing and validating polarizable force fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aqueous Zr/Hf IV ‐Oxo Cluster Speciation and Separation

Abstract Many industrial separations of chemically‐similar elements are achieved by solvent extraction, exploiting differences in speciation and solubility across aqueous‐organic interfaces. We recently identified [OM 4 (OH) 6 (SCN) 12 ] 4− (OM 4 , M=Zr/Hf IV ) tetrahedral oxoclusters as the main species in industrial processes that produce nuclear‐grade Zr and Hf from crude ore. However, isostructural/isoelectronic OM 4 ‐oxoclusters do not explain selective extraction of Hf into the organic phase. Here we have characterized heterometal Hf−Zr clusters in solution and the solid‐state yielding key information about their fundamentally different chemistry that engenders separation. Clusters prepared with both ammonium (industrial process) and tetramethylammonium counter cations revealed that 1) heterometal clusters (instead of a mixture of homometal clusters) assemble, and 2) Hf‐rich OM 4 selectively precipitates over Zr‐rich OM 4 , providing a separation process that does not require an organic extractant. Mass spectrometry, small‐angle X‐ray scattering, solution‐state 1 H nuclear magnetic resonance (NMR) spectroscopy, and solid‐state 17 O NMR evidence both mixed‐metal speciation and selective Hf‐precipitation. Raman spectroscopy suggests greater Zr‐ligand lability than Hf‐ligand lability, consistent with higher aqueous solubility of Zr‐rich clusters, enabling both extraction and precipitation‐based separation. Fundamentally, we also identify a key difference between these chemically similar elements that has enabled diversification of Zr‐polyoxocation chemistry over the last decade, while Hf‐polyoxocation chemistry lags.

Roseborough, Alexander [Department of Chemistry Or↗

Hydroxy acetone and lactic acid synthesis from aqueous propylene glycol/hydrogen peroxide catalysis on Pd-black

The production of polyol chemicals is of increasing interest as they are obtained from the catalytic processing of biological feedstock materials, which also is becoming more prevalent. A case in point is glycerol production, formed as a byproduct in biodiesel catalytic processing. Here we report the reaction of a simple 1,2-diol, propylene glycol, with hydrogen peroxide and a Pd-black catalyst under reflux conditions at 368 K. The experiments were performed by either co-addition of hydrogen peroxide with air sparging, or addition of hydrogen peroxide alone, each yielding hydroxy acetone (HA) and acetic acid (AA) products, with a lesser amount of lactic acid (LA) formed. Product conversion data at near neutral pH versus hydrogen peroxide equivalents added relative to substrate is presented. Hydrogen peroxide addition without air sparging at 5 equivalents resulted in 65% conversion with an HA:AA molar ratio of 2:1. Conversely, hydrogen peroxide addition with air sparging at only 0.75 equivalents resulted in 40% conversion with an HA:AA ratio of 3:1. From this it is concluded that although the product distribution in these chemistries is somewhat unchanged by air sparging, it is surprising that the amount of reactive oxygen is greatly enhanced with co-addition of O2/H2O2. Additional studies have revealed the amount of LA formed can be enhanced under acidic conditions (pH=1.5 compared to pH=8.5), such that 26% of total product formation is LA. Since hydrogen peroxide is an environmentally clean reagent and becoming more cost effective to use, this work may guide future applied investigations into polyol chemical syntheses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced removal of aqueous hexavalent chromium (Cr(VI)) as a nuclear industry water contaminant by a polymer-modified activated carbon - 18354

Cr (VI) is produced through industrial processes including nuclear activities. It is one of the highly toxic pollutants defined by US EPA, classified as a know human carcinogen. Some of the health effects caused by Cr (VI) exposure are: severe skin and eye damage, nose, throat and lung irritations, damage to the mucous membranes results in ulcers. At Hanford and Savannah River nuclear sites in the United States, the chromium concentration vary from 20 - 30,000 μg/L in water. The maximum level of Cr(VI) for drinking water has been regulated by California Environmental Protection Agency (Cal/EPA) at 0.01 mg/L. Activated carbon (AC) is a widely-used adsorbent for water treatment. However, AC has a limited selectivity for chromium species. Thiol compounds (R-S-H) have also been reported to reduce Cr(VI) to Cr(III) which is harmless. To enhance the removal efficiency of chromium, polysulfide rubber polymer containing thiol was synthesized and coated on Activated Carbon (AC-PSR). Polymer coating on activated carbon enhances its sorption capacity by increasing the chromium binding sites. Conclusions: Polysulfide rubber polymer successfully coated on granular activated carbon. AC-PSR provided greater Cr(VI) removal capacity, due to the reduction of Cr(VI) to Cr(III) by thiol compounds in PSR, as well as physical adsorption onto AC. Future Work: Investigating intra-particle diffusion mechanism of of Cr(VI) in AC-PSR. Evaluating reusability of AC-PSR. Investigating the competition of mercury and chromium ions to be adsorbed onto AC-PSR.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A coupled THMC model of a heating and hydration laboratory experiment in unsaturated compacted FEBEX bentonite

Unsaturated compacted bentonite is foreseen by several countries as a backfill and sealing material in high-level radioactive waste repositories. The strong interplays between thermal (T), hydrodynamic (H), mechanical (M) and chemical (C) processes during the hydration stage of a repository call for fully coupled THMC models. Validation of such THMC models is prevented by the lack of comprehensive THMC experiments and the difficulties of experimental methods to measure accurately the chemical composition of bentonite porewater. We present here a non-isothermal multiphase flow and multicomponent reactive solute transport model for a deformable medium of a heating and hydration experiment performed on a sample of compacted FEBEX bentonite. Besides standard solute transport and geochemical processes, the model accounts for solute cross diffusion and thermal and chemical osmosis. Bentonite swelling is solved with a state-surface approach. The THM model is calibrated with transient temperature, water content and porosity data measured at the end of the experiment. The reactive transport model is calibrated with porewater chemical data derived from aqueous extract data. Model results confirm that thermal osmosis is relevant for the hydration of FEBEX bentonite while chemical osmosis can be safely neglected. Dilution and evaporation are the main processes controlling the concentration of conservative species. Dissolved cations are mostly affected by calcite dissolution-precipitation and cation exchange reactions. Dissolved sulphate is controlled by gypsum/anhydrite dissolution-precipitation. pH is mostly buffered by protonation/deprotonation via surface complexation. Computed concentrations agree well with inferred aqueous extract data at all sections except near the hydration boundary where cation data are affected by a sampling artifact. The fit of Cl{sup -} data is excellent except for the data near the heater. The largest deviations of the model from inferred aqueous extract data occur for dissolved SO{sub 4}{sup 2-} which is underpredicted by the model. There are uncertainties on the amount of gypsum available for dissolution and its dissolution mechanism (kinetics or local equilibrium).

54 ENVIRONMENTAL SCIENCES↗

Modeling Mesoscale Processes of Scalable Synthesis (Final Report)

The main objective of the center is to develop tools that can help for the understanding of equilibrium and non-equilibrium properties of nanoparticles in aqueous electrolytes. To achieve this goal, we need to develop new computational methodologies that can integrate molecular level description such as the electronic structure analysis to mesoscale description such as generalized hydrodynamics. The challenge is to develop systematic coarse graining techniques that can adaptively choose the level of description needed for the particular task. For example, if bonding breaking is involved, then one should use appropriate models from quantum mechanics to accurately model the time scale and molecular mechanism for the breaking process. However, to model transport process or the process of self-assembly, much less detailed models can be used. There are two main components to this task. One is to develop accurate models that bridge different levels of description. The classical example is the QM/MM model that bridges quantum mechanics and molecular mechanics for studying chemical reactions of large molecules. This work was awarded the Nobel prize this year. For our purpose, we also need to develop methods that bridge molecular and continuum levels of description. Another main task is to develop systematic coarse-graining methods that can give rise to accurate mesoscale and macroscale models, starting from more detailed models at the atomic or molecular scale. None of these ideas are new. By now they have been fashionable topics for quite some time. But neither problem is satisfactorily resolved. The main problem is that uncontrolled approximations are used. As a result, we have very little idea about the validity and accuracy of these models. The main purpose of the center is to exploit the Mori-Zwanzig formalism to achieve the goals stated above. The Mori-Zwanzig formalism is a general tool for eliminating degrees of freedom from existing models. What is attractive about this formalism is its generality. The flip side is that it is also somewhat of a tautology. In order to make it a practical tool, one has to make approximations and this is where the trouble comes. Instead of focusing on Mori-Zwanzig formalism, the PI proposes to study the closely related renormalization group formalism (RG). Like Mori-Zwanzig, RG is a general strategy for eliminating small scale degrees of freedom in a model. Unlike Mori-Zwanzig, RG has the advantage that at least for some problems, one can write a PDE (partial differential equation) type of model for the exact RG flow, without any approximation. This gives us a solid starting point for discussing and analyzing approximations. The PI studied approximate RG flows for turbulent diffusion and related problems. However, extending it to more practical problems proved to be hard. The second line that the PI has pursued is to develop special numerical algorithms for studying particularly important events for dynamics processes in meso-scale systems. The PI succeeded in doing so for the problem of understanding phase transition in metallic systems.

97 MATHEMATICS AND COMPUTING↗

Lessons Learned in the Development of Industry Guidance - 20279

The availability of industry guidance on different aspects of waste management forms a valuable reference for waste practitioners. The guidance typically details the principles, processes and practices that should be consulted during each stage of the relevant activities. It also includes relevant regulatory and international requirements, appropriate case studies and examples of best practices to illustrate technical concepts and make the information available to the reader in an accessible manner. Over recent years Wood have developed (or are developing) a number of industry guidance documents on a range of topics including Solid Waste Characterization, Routine Water Quality Monitoring on Nuclear Sites: Pipeline Characterization: Determining Background Radioactivity for Land Quality Assessment: Interim Storage and Aqueous Waste Management. This talk provides an overview of lessons learned along the way including: - the importance of stakeholder engagement through the process: - how to identify 'good practice'; - the importance of iterative development; and - the selection of illustrative and informative case studies. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

RESULTS OF ROUTINE STRIP EFFLUENT HOLD TANK AND DECONTAMINATED SALT SOLUTION HOLD TANK SAMPLES FROM MODULAR CAUSTIC-SIDE SOLVENT EXTRACTION UNIT DURING MACROBATCH 3 OPERATIONS

Strip Effluent Hold Tank (SEHT) and Decontaminated Salt Solution Hold Tank (DSSHT) samples from several of the 'microbatches' of Integrated Salt Disposition Project (ISDP) Salt Batch ('Macrobatch') 3 have been analyzed for {sup 238}Pu, {sup 90}Sr, {sup 137}Cs, and by Inductively Coupled Plasma Emission Spectroscopy (ICPES). The results indicate good decontamination performance within process design expectations. While the data set is sparse, the results of this set and the previous set of results for Macrobatch 3 samples indicate consistent operations. However, the Decontamination Factors for plutonium and strontium removal have declined in Macrobatch 3, compared to Macrobatch 2. This may be due to the differences in the Pu concentration or the bulk chemical concentrations in the feed material. SRNL is considering the possible reasons for this decline. The DSSHT samples show continued presence of titanium, likely from leaching of the monosodium titanate in ARP. During operation of the ISDP, quantities of salt waste are processed through the Actinide Removal Process (ARP) and MCU in batches of {approx}3800 gallons. Monosodium titanate (MST) is used in ARP to adsorb actinides and strontium from the salt waste and the waste slurry is then filtered prior to sending the clarified salt solution to MCU. The MCU uses solvent extraction technology to extract cesium from salt waste and concentrate cesium in an acidic aqueous stream (Strip Effluent - SE), leaving a decontaminated caustic salt aqueous stream (Decontaminated Salt Solution - DSS). Sampling occurs in the Decontaminated Salt Solution Hold Tank (DSSHT) and Strip Effluent Hold Tank (SEHT) in the MCU process. The MCU sample plan requires that batches be sampled and analyzed for plutonium and strontium content by Savannah River National Lab (SRNL) to determine MST effectiveness. The cesium measurement is used to monitor cesium removal effectiveness and the inductively coupled plasma emission spectroscopy (ICPES) is used to monitor inorganic carryover.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Nuclear Energy Critical Material Waste Minimization Enabled by AM Techniques

This project provides evidence of the successful recycling of solid waste offcuts resulting from conventional manufacturing processes from three relevant alloys to next-generation nuclear reactor developers, providing a potentially upscalable circular process where no critical elements will be lost. Furthermore, iMOF-based adsorbents were successfully designed for CM extraction from aqueous solution, thereby providing a pathway for future upscaling for salvaging dissolved Ni ions. This research has achieved its goal of showing the impact of novel applications of recycling technologies for solid and liquid wastes that can be upscaled for application.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Mass transfer apparatus and method for separation of gases

A process and apparatus for separating components of a source gas is provided in which more soluble components of the source gas are dissolved in an aqueous solvent at high pressure. The system can utilize hydrostatic pressure to increase solubility of the components of the source gas. The apparatus includes gas recycle throughout multiple mass transfer stages to improve mass transfer of the targeted components from the liquid to gas phase. Separated components can be recovered for use in a value added application or can be processed for long-term storage, for instance in an underwater reservoir.

03 NATURAL GAS↗

Mass transfer apparatus and method for separation of gases

A process and apparatus for separating components of a source gas is provided in which more soluble components of the source gas are dissolved in an aqueous solvent at high pressure. The system can utilize hydrostatic pressure to increase solubility of the components of the source gas. The apparatus includes gas recycle throughout multiple mass transfer stages to improve mass transfer of the targeted components from the liquid to gas phase. Separated components can be recovered for use in a value added application or can be processed for long-term storage, for instance in an underwater reservoir.

54 ENVIRONMENTAL SCIENCES↗