Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomically thin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Atomically phase-matched second-harmonic generation in a 2D crystal

Second-harmonic generation (SHG) has found extensive applications from hand-held laser pointers to spectroscopic and microscopic techniques. Recently, some cleavable van der Waals (vdW) crystals have shown SHG arising from a single atomic layer, where the SH light elucidated important information such as the grain boundaries and electronic structure in these ultra-thin materials. However, despite the inversion asymmetry of the single layer, the typical crystal stacking restores inversion symmetry for even numbers of layers leading to an oscillatory SH response, drastically reducing the applicability of vdW crystals such as molybdenum disulfide (MoS 2 ). Here, we probe the SHG generated from the noncentrosymmetric 3R crystal phase of MoS 2 . We experimentally observed quadratic dependence of second-harmonic intensity on layer number as a result of atomically phase-matched nonlinear dipoles in layers of the 3R crystal that constructively interfere. By studying the layer evolution of the A and B excitonic transitions in 3R-MoS 2 using SHG spectroscopy, we also found distinct electronic structure differences arising from the crystal structure and the dramatic effect of symmetry and layer stacking on the nonlinear properties of these atomic crystals. The constructive nature of the SHG in this 2D crystal provides a platform to reliably develop atomically flat and controllably thin nonlinear media.

3R-MoS2↗

Synthesis, characterization and properties of yellow-light-emitting polyethers containing bis(styryl)anthracene units

Aromatic aliphatic polyethers containing bis(styryl)anthracene units in the main chain separated by flexible spacer of 11 (AND52) or 12 (AND53) methylene units, were synthesized and characterized aiming to be applied as emitting materials in polymer light emitting diode (PLED) devices. The polymers are soluble in common organic solvents and have average molecular weight of about 15kDa. Differentiations owing to an odd-even number of methylene units (χ=11 vs χ=12) are observed in their optical properties in solid state. Thin films as well as PLED devices were fabricated via conventional spin-coating process. Initially, various parameters have been investigated concerning the solubility of the polymers, the effect of film thickness on the electrical properties, and their thermal stability. The optical properties of the two polymers were investigated by NIR-Vis-far UV spectroscopic ellipsometry (SE). The accurate determination of the thickness and the optical constants (refractive index and dielectric function as a function of wavelength) were derived. These provide substantial insights into the final design of the optimum final multi-layer structure of the PLEDs, if we take into account that the external quantum efficiency (EQE) of electroluminescence (EL) strongly depends on the optical interference of the beams of emitted light that have been multiply reflected from the layer interfaces. The morphological characterization of the AND52 and AND53 polymeric thin films was carried out using atomic force microscopy (AFM), while current density-voltage (J-V) characteristics of the devices were studied by electrical measurements. The single PLED devices were switched on at relatively low operation voltages, showing the potential as backplanes for active matrix PLED applications. In this perspective, it can be assumed that further studies of the presented materials will enable the development of flexible PLEDs with the possibility to scale up their dimensions for bigger active area devices.

36 MATERIALS SCIENCE↗

Nonpolynomial Schroedinger equation for resonantly absorbing gratings

We derive a nonlinear Schroedinger equation with a radical term, {approx}{radical}(1-|V|{sup 2}), as an asymptotic model of the resonantly absorbing Bragg reflector (RABR), i.e., a periodic set of thin layers of two-level atoms, resonantly interacting with the electromagnetic field and inducing the Bragg reflection. A family of bright solitons is found, which splits into stable and unstable parts, exactly obeying the Vakhitov-Kolokolov criterion. The soliton with the largest amplitude, (|V|){sub max}=1, is a ''quasipeakon,'' i.e., a solution with a discontinuity of the third derivative at the center. Families of exact cnoidal waves, built as periodic chains of quasipeakons, are found too. The ultimate solution belonging to the family of dark solitons, with the background level V=1, is a dark compacton. Those bright solitons that are unstable destroy themselves (if perturbed) attaining the critical amplitude, |V|=1. The dynamics of the wave field around this critical point is studied analytically, revealing a switch of the system into an unstable phase, in terms of the RABR model. Collisions between bright solitons are investigated too. The collisions between fast solitons are quasielastic, while slowly moving ones merge into breathers, which may persist or perish (in the latter case, also by attaining |V|=1).

74 ATOMIC AND MOLECULAR PHYSICS↗

Oxygen-vacancy-induced room-temperature magnetization in lamellar V{sub 2}O{sub 5} thin films

In this work, we study the local atomic and electronic structures as well as oxygen-vacancy-induced magnetic properties of electrodeposited V{sub 2}O{sub 5} films. Unlike stoichiometric V{sub 2}O{sub 5}, which is a diamagnetic lamellar semiconductor, our oxygen-defective V{sub 2}O{sub 5} films are ferromagnetic at room-temperature and their saturation magnetization decreases with air exposure time. X-ray absorption spectroscopy was used to monitor the aging effect on these films, revealing that freshly-made samples exhibit only local crystalline order, whereas the aged ones undoubtedly show an enhancement of crystallinity and coordination symmetry. The mean number of oxygen atoms around V tends to increase, indicating a decrease of oxygen vacancies with time. Concurrently with the decrease of oxygen vacancies, a loss of saturation magnetization is also observed. Hence, it can be concluded that the ferromagnetism of the V{sub 2}O{sub 5} films originates from a vacancy-induced mechanism, confirming the universality of this class of ferromagnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Identification of a functional point defect in SrTi O 3

Unveiling both the presence and nature of point defects is one of the biggest challenges in condensed matter physics and materials science. Particularly in complex oxides, even a minute amount of unavoidable point defects could generate novel physical phenomena and functions, such as visible light emission and ferroelectricity, yet it remains elusive to clearly identify such point defects. Here, taking SrTiO3 as a model system, we show that iterative feedback among atomic-layer- and stoichiometry-controlled thin-film epitaxy, hybrid density functional theory, and high-resolution cathodoluminescence spectroscopy allows for the identification of a functional cationic defect, the Ti antisite (TiSr) defect. Our cathodoluminescence measurements reveal sub-band-gap luminescence, whose spectral fine structures show excellent quantitative agreement, as well as a one-to-one correspondence, with the theoretically predicted optical transitions from intrinsic point defects such as TiSr. Guided by the theory and spectroscopic results, we also control a cation stoichiometry, and it in turn results in good systematics in cathodoluminescence spectra. Not limited to the identification of TiSr, this approach allows for more reliable, self-consistent defect study, and provides critical insight into a microscopic picture of point defects in complex oxides.

Lee, Daesu↗

Automated Growth of Photocathodes [Slides]

Photocathode (alkali antimonides & tellurides) thin film growth state of the art remains largely an art of “cooking” instead of a controlled technological process. Our technology is a method of growing thin films by molecular beam deposition, that applies specifically to photoemissive films. We discovered that some of the photoemissive properties of Cs3Sb (easily measurable) strongly depend on the film’s stoichiometry (very difficult to measure, especially in real time). Such correlation allows to implement a feedback loop that adjusts the ratio of Cs and Sb fluxes in real time and thus maintains the same stoichiometric composition of the film during the whole growth cycle that may last for hours/days. Proposed scheme constitutes true, robust and versatile process control for the growth of alkali antimonide thin films.

36 MATERIALS SCIENCE↗

Coherent heteroepitaxy of Bi{sub 2}Se{sub 3} on GaAs (111)B

We report the heteroepitaxy of single crystal thin films of Bi{sub 2}Se{sub 3} on the (111)B surface of GaAs by molecular beam epitaxy. We find that Bi{sub 2}Se{sub 3} grows highly c-axis oriented, with an atomically sharp interface with the GaAs substrate. By optimizing the growth of a very thin GaAs buffer layer before growing the Bi{sub 2}Se{sub 3}, we demonstrate the growth of thin films with atomically flat terraces over hundreds of nanometers. Initial time-resolved Kerr rotation measurements herald opportunities for probing coherent spin dynamics at the interface between a candidate topological insulator and a large class of GaAs-based heterostructures.

36 MATERIALS SCIENCE↗

Silicon Surface Tethered Polymer as Artificial Solid Electrolyte Interface

Here, we have developed a proof of concept electrode design to covalently graft poly(methyl methacrylate) brushes directly to silicon thin film electrodes via surface-initiated atom transfer radical polymerization. This polymer layer acts as a stable artificial solid electrolyte interface that enables surface passivation despite large volume changes during cycling. Thin polymer layers (75 nm) improve average first cycle coulombic efficiency from 62.4% in bare silicon electrodes to 76.3%. Average first cycle reversible capacity was improved from 3157 to 3935 mAh g -1 , and average irreversible capacity was reduced from 2011 to 1020 mAh g -1 . Electrochemical impedance spectroscopy performed on silicon electrodes showed that resistance from solid electrolyte interface formation increased from 79 to 1508 Ω in untreated silicon thin films over 26 cycles, while resistance growth was lower – from 98 to 498 Ω – in silicon films functionalized with PMMA brushes. The lower increase suggests enhanced surface passivation and lower electrolyte degradation. This work provides a pathway to develop artificial solid electrolyte interfaces synthesized under controlled reaction conditions.

36 MATERIALS SCIENCE↗

Defect-band mediated ferromagnetism in Gd-doped ZnO thin films

Gd-doped ZnO thin films prepared by pulsed laser deposition with Gd concentrations varying from 0.02–0.45 atomic percent (at. %) showed deposition oxygen pressure controlled ferromagnetism. Thin films prepared with Gd dopant levels (<Gd 0.112 at. %) at low oxygen deposition pressure (<25 mTorr) were ferromagnetic at room temperature. Negative magnetoresistance, electric transport properties showed that the ferromagnetic exchange is mediated by a spin-split defect band formed due to oxygen deficiency related defect complexes. Mott's theory of variable range of hopping conduction confirms the formation of the impurity/defect band near the Fermi level.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Understanding the Solid-State Electrode–Electrolyte Interface of a Model System Using First-Principles Statistical Mechanics and Thin-Film X-ray Characterization

Intermixing of atomic species at the electrode-electrolyte boundaries can impact the properties of the interfaces in solid-state batteries. Herein, this work uses first-principles statistical mechanics along with experimental characterization to understand intermixing at the electrode-electrolyte interface. For the model presented in this work, lithium manganese oxide (LiMn 2 O 4 , LMO) and lithium lanthanum titanate (Li 3x La 2/3-x TiO 3 , LLTO) are employed as the cathode and electrolyte, respectively. The results of the computational work show that Ti-Mn intermixing at the interface is significant at synthesis temperatures. The experimental results in this work find that, at some critical temperatures between 600 and 700 degrees C for material preparation, the interface of LLTO-LMO becomes blurred. Calculations predict that the interface is unstable with regard to Ti-Mn intermixing starting at 0 K, suggesting that the critical temperature found in the experiment is related to kinetics. The work overall suggests that, in designing a solid-state battery, the fundamental reactions such as intermixing need to be considered.

25 ENERGY STORAGE↗

Multicycle rapid thermal annealing optimization of Mg-implanted GaN: Evolution of surface, optical, and structural properties

The first step of a multi-cycle rapid thermal annealing process was systematically studied. The surface, structure, and optical properties of Mg implanted GaN thin films annealed at temperatures ranging from 900 to 1200 °C were investigated by Raman spectroscopy, photoluminescence, UV-visible spectroscopy, atomic force microscopy, and Nomarski microscopy. The GaN thin films are capped with two layers of in-situ metal organic chemical vapor deposition -grown AlN and annealed in 24 bar of N{sub 2} overpressure to avoid GaN decomposition. The crystal quality of the GaN improves with increasing annealing temperature as confirmed by UV-visible spectroscopy and the full widths at half maximums of the E{sub 2} and A{sub 1} (LO) Raman modes. The crystal quality of films annealed above 1100 °C exceeds the quality of the as-grown films. At 1200 °C, Mg is optically activated, which is determined by photoluminescence measurements. However, at 1200 °C, the GaN begins to decompose as evidenced by pit formation on the surface of the samples. Therefore, it was determined that the optimal temperature for the first step in a multi-cycle rapid thermal anneal process should be conducted at 1150 °C due to crystal quality and surface morphology considerations.

36 MATERIALS SCIENCE↗

Ferroelectric switching in epitaxial GeTe films

In this paper, using a resonance-enhanced piezoresponse force microscopy approach supported by density functional theory computer simulations, we have demonstrated the ferroelectric switching in epitaxial GeTe films. It has been shown that in films with thickness on the order of several nanometers reversible reorientation of polarization occurs due to swapping of the shorter and longer Ge-Te bonds in the interior of the material. It is also hinted that for ultra thin films consisting of just several atomic layers weakly bonded to the substrate, ferroelectric switching may proceed through exchange of Ge and Te planes within individual GeTe layers.

36 MATERIALS SCIENCE↗

Single crystalline thin films as a novel class of electrocatalysts

The ubiquitous use of single crystal metal electrodes has garnered invaluable insight into the relationship between surface atomic structure and functional electrochemical properties. But, the sensitivity of their electrochemical response to surface orientation and the amount of precious metal required can limit their use. We present here a generally applicable procedure for producing thin metal films with a large proportion of atomically flat (111) terraces without the use of an epitaxial template. Thermal annealing in a controlled atmosphere induces long-range ordering of magnetron sputtered thin metal films deposited on an amorphous substrate. The ordering transition in these thin metal films yields characteristic (111) electrochemical signatures with minimal amount of material and provides an adequate replacement for oriented bulk single crystals. Our procedure can be generalized towards a novel class of practical multimetallic thin film based electrocatalysts with tunable near-surface compositional profile and morphology. Annealing of atomically corrugated sputtered thin film Pt-alloy catalysts yields an atomically smooth structure with highly crystalline, (111)-like ordered and Pt segregated surface that displays superior functional properties, bridging the gap between extended/bulk surfaces and nanoscale systems.

36 MATERIALS SCIENCE↗

Electronic Structure Studies of 200 MeV Ag{sup +15} Swift Heavy Ion Irradiated SnO{sub 2} Thin Films Using X-Ray Absorption Spectroscopy

Tin dioxide (SnO{sub 2}) thin films were deposited on a well cleaned sapphire single crystal substrate by rf magnetron sputtering technique. After deposition, films were irradiated by swift heavy ion (SHI) irradiation at various ion fluences. We present the X-ray absorption spectra (XAS) at the oxygen K- and Sn M{sub 5,4,} edge. The XAS pattern reveals the broadening of O K- and Sn M{sub 5,4,} edge features with increasing ion fluence. The fraction of under-coordinated surface atoms in the SnO{sub 2} thin films increases, which is attributed to the structural distortions induced by SHI irradiations.

36 MATERIALS SCIENCE↗

Atomic‐Scale Mechanisms of Nucleation and Stabilization in CuCrO 2 and CuFeO 2 Delafossite Thin Films on Al 2 O 3

Abstract Delafossite thin films exhibit a range of intriguing physical properties derived from their layered structure, which consists of alternating noble metal ( A + ) and ( B O 2 − ) sublayers in an AB O 2 stoichiometry. The integration of these properties into functional devices requires the successful epitaxial growth of delafossites as thin films on appropriate substrates. Unfortunately, their unique lattice geometry complicates growth, as different delafossites display variable behavior on the same substrate, often unrelated to lattice mismatch. This suggests the presence of yet unidentified stabilization mechanisms that enable the selective growth of certain delafossites, allowing them to be grown either as films themselves or to be used as buffer layers for subsequent deposition. In this study, advanced scanning transmission electron microscopy (STEM) is employed to investigate the nucleation mechanisms governing the stable growth of Cu‐based delafossites on Al 2 O 3 , specifically CuCrO 2 and CuFeO 2 thin films synthesized via molecular‐beam epitaxy. These findings reveal that a combination of a misfit dislocation network at the interface and monolayer‐deep chemical intermixing effectively relieves lattice mismatch strain. This mechanism, which differs fundamentally from that observed in Pd‐based delafossites, provides key insights into the controlled epitaxy of delafossite materials.

Scheid, Anna [Max Planck Institute for Solid State↗