Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomically thin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Synthesis of nanoporous activated iridium oxide films by anodized aluminum oxide templated atomic layer deposition.

Iridium oxide (IrOx) has been widely studied due to its applications in electrochromic devices, pH sensing, and neural stimulation. Previous work has demonstrated that both Ir and IrOx films with porous morphologies prepared by sputtering exhibit significantly enhanced charge storage capacities. However, sputtering provides only limited control over film porosity. In this work, we demonstrate an alternative scheme for synthesizing nanoporous Ir and activated IrOx films (AIROFs). This scheme utilizes atomic layer deposition to deposit a thin conformal Ir film within a nanoporous anodized aluminum oxide template. The Ir film is then activated by potential cycling in 0.1 M H{sub 2}SO{sub 4} to form a nanoporous AIROF. The morphologies and electrochemical properties of the films are characterized by scanning electron microscopy and cyclic voltammetry, respectively. The resulting nanoporous AIROFs exhibit a nanoporous morphology and enhanced cathodal charge storage capacities as large as 311 mC/cm{sup 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Performance Capacitive Deionization via Manganese Oxide-Coated, Vertically Aligned Carbon Nanotubes

Discovering electrode materials with exceptional capacitance, an indicator of the ability of a material to hold charge, is critical for developing capacitive deionization devices for water desalination. Maganese oxides (MnOx) have shown promise as capacitive electrode materials, but they exhibit a tradeoff where higher loading of the active MnOx comes at a cost of lower conductivity. To address this challenge and achieve high salt adsorption, we fabricated electrodes comprising vertically aligned core-shell nanostructures using atomic layer deposition (ALD) to coat thin films of MnOx onto vertically aligned carbon nanotubes (VACNTs). The inherently hierarchical, anisotropic, three-dimensional macroporous structure of VACNTs and the tunable coating, a hallmark of ALD, enabled co-optimization of the hybrid material’s specific capacitance with respect to mass and geometric area. The specific capacitance was optimized in this study to 215 ± 7 F/g and 1.1 ± 0.1 F/cm 2 in 1 M NaCl electrolyte at 5 mV/s scan rate, respectively. This material exhibited remarkable sodium ion adsorption capacity of 489 ± 25 μmol Na /g material (two-fold higher than pristine VACNTs) at a functioning voltage of 1.2 V, which may ultimately enable expanded desalination applications of capacitive deionization.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Chromophore-Catalyst Assembly for Water Oxidation Prepared by Atomic Layer Deposition

Visible-light-driven water splitting was explored in a dye sensitized photoelectrosynthesis cell (DSPEC) based on a photoanode with a phosphonic acid-derivatized donor–π–acceptor (D–π–A) organic chromophore, 1, and the water oxidation catalyst [Ru(bda)(4-O(CH 2 ) 3 P(O 3 H 2 ) 2 -pyr)2], 2, (pyr = pyridine; bda = 2,2'-bipyridine-6,6'-dicarboxylate). The photoanode was prepared by using a layering strategy beginning with the organic dye anchored to an FTO|core/shell electrode, atomic layer deposition (ALD) of a thin layer (<1 nm) of TiO 2 , and catalyst binding through phosphonate linkage to the TiO 2 layer. Device performance was evaluated by photocurrent measurements for core/shell photoanodes, with either SnO 2 or nanoITO core materials, in acetate-buffered, aqueous solutions at pH 4.6 or 5.7. The absolute magnitudes of photocurrent changes with the core material, TiO 2 spacer layer thickness, or pH, observed photocurrents were 2.5-fold higher in the presence of catalyst. The findings of transient absorption measurements and DFT calculations reflect that electron injection by the photoexcited organic dye is ultrafast promoted by electronic interactions enabled by orientation of the dye’s molecular orbitals on the electrode surface. Rapid injection is followed by recombination with the oxidized dye which is 95% complete by 1.5 ns. While chromophore decomposition limits the efficiency of the DSPEC devices toward O 2 production, the flexibility of the strategy presented here offers a new approach to photoanode design.

14 SOLAR ENERGY↗

Accurate real space iterative reconstruction (RESIRE) algorithm for tomography

Tomography has made a revolutionary impact on the physical, biological and medical sciences. The mathematical foundation of tomography is to reconstruct a three-dimensional (3D) object from a set of two-dimensional (2D) projections. As the number of projections that can be measured from a sample is usually limited by the tolerable radiation dose and/or the geometric constraint on the tilt range, a main challenge in tomography is to achieve the best possible 3D reconstruction from a limited number of projections with noise. Over the years, a number of tomographic reconstruction methods have been developed including direct inversion, real-space, and Fourier-based iterative algorithms. Here, we report the development of a real-space iterative reconstruction (RESIRE) algorithm for accurate tomographic reconstruction. RESIRE iterates between the update of a reconstructed 3D object and the measured projections using a forward and back projection step. The forward projection step is implemented by the Fourier slice theorem or the Radon transform, and the back projection step by a linear transformation. Our numerical and experimental results demonstrate that RESIRE performs more accurate 3D reconstructions than other existing tomographic algorithms, when there are a limited number of projections with noise. Furthermore, RESIRE can be used to reconstruct the 3D structure of extended objects as demonstrated by the determination of the 3D atomic structure of an amorphous Ta thin film. We expect that RESIRE can be widely employed in the tomography applications in different fields. Finally, to make the method accessible to the general user community, the MATLAB source code of RESIRE and all the simulated and experimental data are available at https://zenodo.org/record/7273314.

97 MATHEMATICS AND COMPUTING↗

Molecular engineering of nanoscale order in organic electro-optic glasses

The rational design of bulk nanoscale order in organic electro-optic materials, where the strong dipole-dipole interactions tend to dominate over the weaker forces exploited for self-assembly processes, remains an attractive yet elusive goal. Towards this end, a series of pseudo-discotic dipolar nonlinear optical chromophores have been synthesized and fully characterized. Theoretical guidance and an iterative molecular design process have succeeded in engineering long-range nanoscale order in organic electro-optic glasses. Small-angle thin-film X-ray diffraction experiments demonstrate a self-assembled lamellar morphology in a majority of these materials. Cryogenic crystallography, using a synchrotron X-ray source, afforded the structure of a representative system. This structure, in concert with thin-film X-ray diffraction, atomic force microscopy, UV-vis-NIR absorption spectroscopy, and refractive index experiments elucidated the nanoscale order in the films. Application of these materials in electro-optics is discussed.

36 MATERIALS SCIENCE↗

Dissipation in an ultrathin superconducting single-crystal Pb nanobridge

The transport property of a superconducting Pb nanobridge, which is carved by focus ion beam technique from an atomically flat single-crystal Pb thin film grown on Si(111) substrate, is investigated. Below the superconducting transition temperature T{sub C}, the nanobridge exhibits a series of sharp voltage steps as a function of current. The multiple voltage steps are interpreted as a consequence of spatially localized phase slip centers or hot-spot formation in the bridge. Just below the critical current, the voltages versus current curve shows a power-law behavior in the low temperature region, but Ohmic near the T{sub C}. The thermally activated phase slip, quantum phase slip, and imhomogeneity in a one-dimensional superconducting system may contribute to the observed results.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Atomic layer deposition of photoactive CoO/SrTiO{sub 3} and CoO/TiO{sub 2} on Si(001) for visible light driven photoelectrochemical water oxidation

Cobalt oxide (CoO) films are grown epitaxially on Si(001) by atomic layer deposition (ALD) using a thin (1.6 nm) buffer layer of strontium titanate (STO) grown by molecular beam epitaxy. The ALD growth of CoO films is done at low temperature (170–180 °C), using cobalt bis(diisopropylacetamidinate) and water as co-reactants. Reflection high-energy electron diffraction, X-ray diffraction, and cross-sectional scanning transmission electron microscopy are performed to characterize the crystalline structure of the films. The CoO films are found to be crystalline as-deposited even at the low growth temperature with no evidence of Co diffusion into Si. The STO-buffered Si (001) is used as a template for ALD growth of relatively thicker epitaxial STO and TiO{sub 2} films. Epitaxial and polycrystalline CoO films are then grown by ALD on the STO and TiO{sub 2} layers, respectively, creating thin-film heterostructures for photoelectrochemical testing. Both types of heterostructures, CoO/STO/Si and CoO/TiO{sub 2}/STO/Si, demonstrate water photooxidation activity under visible light illumination. In-situ X-ray photoelectron spectroscopy is used to measure the band alignment of the two heterojunctions, CoO/STO and CoO/TiO{sub 2}. The experimental band alignment is compared to electronic structure calculations using density functional theory.

36 MATERIALS SCIENCE↗

Electrical response in atomic layer deposited Al:ZnO with varying stack thickness

We report on the effects of stacking of the macrocycles in atomic layer deposited (ALD) Al:ZnO thin films on the structural and electrical properties. There is a large change in the resistivity ranging from as high as 1.19 × 10{sup −3} Ω cm for 760 growth cycles film down to as low as 7.9 × 10{sup −4} Ω cm for the 4000 cycles. The electrical transport demonstrates a transition from a semiconductor behavior at 760 cycles to a metallic behavior in the 4000 cycle, due to an increase in electron scattering as well as increase in the carrier concentration. However, interestingly the carrier concentration sharply increases with increasing macrocycles containing Al and Zn, exhibiting a nearly metal-like behavior in thicker films. We anticipate that the change in Zn-vacancy, V{sub zn}, formation energy is related to the increase in surface area of the ALD precursor deposition plane. The increase in V{sub zn} density allows for more adsorption of Al-precursor into the doped monolayer, showing interesting electrical properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A modular reactor design for in situ synchrotron x-ray investigation of atomic layer deposition processes

Synchrotron characterization techniques provide some of the most powerful tools for the study of film structure and chemistry. The brilliance and tunability of the Advanced Photon Source allow access to scattering and spectroscopic techniques unavailable with in-house laboratory setups and provide the opportunity to probe various atomic layer deposition (ALD) processes in situ starting at the very first deposition cycle. Here, we present the design and implementation of a portable ALD instrument which possesses a modular reactor scheme that enables simple experimental switchover between various beamlines and characterization techniques. As first examples, we present in situ results for (1) X-ray surface scattering and reflectivity measurements of epitaxial ZnO ALD on sapphire, (2) grazing-incidence small angle scattering of MnO nucleation on silicon, and (3) grazing-incidence X-ray absorption spectroscopy of nucleation-regime Er{sub 2}O{sub 3} ALD on amorphous ALD alumina and single crystalline sapphire.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Exploration of vertical scaling limit in carbon nanotube transistors

Top-gated carbon nanotube field-effect transistors (CNT FETs) were fabricated by using ultra-thin (4.5 nm or thinner) atomic-layer-deposition grown HfO{sub 2} as gate insulator, and shown to exhibit high gate efficiency, i.e., all examined (totally 76) devices present very low room temperature subthreshold swing with an averaged value of 64 mV/Dec, without observable carrier mobility degradation. The gate leakage of the CNT FET under fixed gate voltage is dependent not only on the thickness of HfO{sub 2} insulator, but also on the diameter of the CNT. The vertical scaling limit of CNT FETs is determined by gate leakage standard in ultra large scale integrated circuits. HfO{sub 2} film with effective oxide thickness of 1.2 nm can provide both excellent gate electrostatic controllability and small gate leakage for sub-5 nm FETs based on CNT with small diameter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Plasma-assisted deposition and characterization of Al 2 O 3 dielectric layers on (001) β -Ga 2 O 3

In this work, we have investigated plasma-assisted deposition of Al 2 O 3 on HVPE (001) β-Ga 2 O 3 and evaluated the dielectric quality from electrical measurements on fabricated metal-oxide-semiconductor (MOS) capacitors. The interface structure and crystallinity of the films were investigated as a function of the growth temperature. The dielectric/semiconductor interfaces were found to have reverse breakdown electric fields up to 5.3 MV/cm in the β-Ga 2 O 3 , with relatively low hysteresis in capacitance–voltage and low leakage current. We determined a negative fixed interface charge density at the interface from analysis of thickness-dependent capacitance voltage data. In conclusion, this study shows the advantage of using plasma-assisted deposition to achieve high breakdown strength Al 2 O 3 /β-Ga 2 O 3 MOS structures for device application purposes.

42 ENGINEERING↗

High field dielectric response in κ-Ga 2 O 3 films

κ-Ga 2 O 3 has been predicted to be a potential ferroelectric material. In this work, undoped Ga 2 O 3 films were grown by either plasma-enhanced atomic layer deposition (PEALD) or metal organic chemical vapor deposition (MOCVD) on platinized sapphire substrates. 50 nm thick PEALD films with a mixture of κ-Ga 2 O 3 and β-Ga 2 O 3 had a relative permittivity of ~27, a loss tangent below 2%, and high electrical resistivity up to ~1.5 MV/cm. 700 nm thick MOCVD films with predominantly the κ-Ga 2 O 3 phase had relative permittivities of ~18 and a loss tangent of 1% at 10 kHz. Neither film showed compelling evidence for ferroelectricity measured at fields up to 1.5 MV/cm, even after hundreds of cycles. Here, piezoresponse force microscopy measurements on bare κ-Ga 2 O 3 showed a finite piezoelectric response that could not be reoriented for electric fields up to 1.33 MV/cm.

36 MATERIALS SCIENCE↗

Testing strong-field QED with the avalanche precursor

A two-beam high-power laser facility is essential for the study of one of the most captivating phenomena predicted by strong-field quantum electrodynamics (QED) and yet unobserved experimentally: the avalanche-type cascade. In such a cascade, the energy of intense laser light can be efficiently transformed into high-energy radiation and electron–positron pairs. The future 50-petawatt-scale laser facility NSF OPAL will provide unique opportunities for studying such strong-field QED effects, as it is designed to deliver two ultra-intense, tightly focused laser pulses onto the interaction point. In this work, we investigate the potential of such a facility for studying elementary particle and plasma dynamics deeply in the quantum radiation-dominated (RD) regime, and the generation of QED avalanches. With three-dimensional particle-in-cell simulations, we demonstrate that QED avalanche precursors can be reliably triggered under realistic laser parameters and layout (namely, focusing f/2, tilted optical axes, and non-ideal co-pointing) with the anticipated capabilities of NSF OPAL. We demonstrate that seed electrons can be efficiently injected into the laser focus by using targets of three types: a gas of heavy atoms, an overcritical plasma, and a thin foil. A strong positron and high-energy photon signal is generated in all cases. The cascade properties can be identified from the final particle distributions, which have a clear directional pattern. At increasing laser field intensity, such distributions provide signatures of the transition, first, to the RD interaction regime, and then to a QED avalanche. Our findings can also be used for designing related future experiments.

Lasers↗

Tantalum alloy–based resonators for quantum information systems

Utilizing tantalum (Ta) in superconducting circuits has led to significant improvements, such as high qubit lifetime (T 1 ) and quality factors in both qubits and resonators, suggesting that material optimization plays an important role in the development of superconducting circuits. Thus we here explore superconducting gap engineering in Ta-based devices as a powerful strategy for expanding the range of suitable host materials. By alloying 20 atomic percent (at.%) hafnium into Ta thin films, we achieve a superconducting transition temperature (T c ) of 6.09 K as observed in direct current (DC) transport measurements, reflecting an increase in the superconducting gap. We systematically vary deposition conditions to control film orientation and transport properties of Ta-Hf alloy thin films. We then confirm the enhancement in T c via microwave measurements at millikelvin temperatures. We verify the ~40 increase in T c relative to bare Ta devices, while the loss contributions from two-level systems and quasi-particles remain unchanged in the low temperature regime. These findings emphasize the promise of material engineering in superconducting circuits and point to many potential material candidates for further exploration.

Ta-Hf alloy thin films↗