Search NASA⌕ Search

SEARCH · Search NASA

Results for “code validation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Validation of COG 10 and ENDFB6R7 on the Surya Workstation for General Application to Highly Enriched Uranium Systems

The COG 10 code package on the Surya workstation is now validated with the ENBFB6R7 neutron cross section library for general application to highly enriched uranium (HEU) systems by comparison of the calculated k effective to the expected k effective of several relevant experimental benchmarks. This validation is supplemental to the installation and verification of COG 10 on the Surya workstation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Dynamical analysis of innovative core designs facing unprotected transients with the MAT5 DYN code

Since 2007, advanced Sodium-cooled Fast Reactors (SFR) are investigated by CEA, AREVA and EDF in the framework of a joint French collaboration. A prototype called ASTRID, sets out to demonstrate progress made in SFR technology, is due to operate in the years 2020's. The modeling of unprotected transients by computer codes is one of the key safety issues in the design approach to such SFR systems. For that purpose, the activity on CATHARE, which is the reference code for the transient analysis of ASTRID, has been strengthened during last years by CEA. In the meantime, EDF has developed a simplified and multi-channel code, named MAT5 DYN, to analyze and validate innovative core designs facing protected and unprotected transients. First, the paper consists in a description of MAT5 DYN: a code based on the existing code MAT4 DYN including major improvements on geometry description and physical modeling. Second, two core designs based on the CFV core design developed at CEA are presented. Then, the dynamic response of those heterogeneous cores is analyzed during unprotected loss of flow (ULOF) transient and unprotected transient of power (UTOP). The results highlight the importance of the low void core effect specific to the CFV design. Such an effect, when combined with a sufficient primary pump halving time and an optimized cooling group scheme, allows to delay (or, possibly, avoid) the sodium boiling onset during ULOF accidents. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Preliminary Analysis of the Transient Reactor Test Facility (TREAT) with PROTEUS

The neutron transport code PROTEUS has been used to perform preliminary simulations of the Transient Reactor Test Facility (TREAT). TREAT is an experimental reactor designed for the testing of nuclear fuels and other materials under transient conditions. It operated from 1959 to 1994, when it was placed on non-operational standby. The restart of TREAT to support the U.S. Department of Energy’s resumption of transient testing is currently underway. Both single assembly and assembly-homogenized full core models have been evaluated. Simulations were performed using a historic set of WIMS-ANL-generated cross-sections as well as a new set of Serpent-generated cross-sections. To support this work, further analyses were also performed using additional codes in order to investigate particular aspects of TREAT modeling. DIF3D and the Monte-Carlo codes MCNP and Serpent were utilized in these studies. MCNP and Serpent were used to evaluate the effect of geometry homogenization on the simulation results and to support code-to-code comparisons. New meshes for the PROTEUS simulations were created using the CUBIT toolkit, with additional meshes generated via conversion of selected DIF3D models to support code-to-code verifications. All current analyses have focused on code-to-code verifications, with additional verification and validation studies planned. The analysis of TREAT with PROTEUS-SN is an ongoing project. This report documents the studies that have been performed thus far, and highlights key challenges to address in future work.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Validation of statistical uncertainties in subcritical benchmark measurements: Part II – Measured data

Part I of this work presented an uncertainty approach which incorporates the singles and doubles counting rates determined by the Hage-Cifarelli formalism of the Feynman Variance-to-Mean method. This moments-based approach utilizes time correlations between prompt neutrons detections to assess the system multiplication. Additionally, it presented a validation which utilized simulated data generated using a 0-D point-kinetics Monte Carlo code. In Part II, this same method and validation approach is applied to measured data of a subcritical benchmark experiment. These measurements were performed with a 4.5 kg sphere of alpha-phase weapons grade plutonium reflected by copper and/or polyethylene. Finally, the results of 17 configurations are shown including detailed validation for four of the configurations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Survey of Relevant Data from the MSRP to Guide Development of MSR Chemistry Modeling Benchmarks

The Multiphysics Applications technical area of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program is tasked with assessing, demonstrating, and applying NEAMS tools in solving multiphysics problems of nuclear reactors, such as liquid-fueled molten salt reactors (MSRs), which are the focus of this report. MSRs are actively being pursued as a potential candidate for power and heat generation by the nuclear industry. However, the inherent multiphysics nature of liquid-fueled MSRs, stemming from the strong interrelationship of neutronics, thermal fluids, and chemistry phenomena, provides unique challenges in modeling and simulation (mod/sim). Therefore, it will be important to develop mod/sim tools with varying types of multiphysics coupling that depend on the problem. The current work is focused on the initiation and development of MSR chemistry modeling benchmarks useful for validating current and potential future NEAMS tools. Development of such benchmarks include the following actions: 1) Summarize available chemistry data from the Oak Ridge National Laboratory (ORNL) MSR Program (MSRP) including operation of the Molten Salt Reactor Experiment (MSRE) and design studies for the Molten Salt Breeder Reactor (MSBR) concept; 2) Recommend simulation problems in MSR chemistry mod/sim based on (1); 3) Assess the current state of NEAMS tools that may support (2); 4) Demonstrate and validate the capabilities of the NEAMS tools in (3) while providing iterative feedback on future code development activities. The objective of this report is to initiate this effort by completing actions (1) and (2), which are discussed in Section 2. An overview of the relevant available MSRE experimental data is provided with examples of how this data may be useful in chemistry mod/sim problems, with the caveat that most of this data is over 50 years old, therefore some problem details as well as uncertainty estimates are often not provided. In Section 3, the current state of NEAMS tools is assessed for potential use in these mod/sim problems, with considerations for future code development activities, supporting action (3). Future work supporting this project under NEAMS may include a deeper dive into the specific phenomena discussed here including tasks such as the compilation of additional available data, updates in code development activities, and ultimately the demonstration and validation of these tools, supporting action (4).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Development and validation of non-axisymmetric heat flux simulations with 3D fields using the HEAT code

A new comprehensive module to simulate heat fluxes from three-dimensional (3D) magnetic fields has been implemented in the HEAT code. Especially compact tokamaks like SPARC require tools to predict and manage large heat fluxes. Existing release versions of HEAT can only simulate axisymmetric heat flux on 3D plasma facing components. The new module uses an M3D-C1 perturbed equilibrium and the MAFOT code to trace field lines of the perturbed 3D magnetic field. Heat flux is then assigned to the resulting footprints via a 3D layer model. The model distinguishes between the scrape-off layer, the magnetic lobes and the private flux region, and employs only 0D parameters like the layer width, diffusive spread and the last closed flux surface position in the perturbed edge to generate a heat flux profile. The magnitude is normalized to the total input power. Resulting heat flux simulations are compared and validated against infrared measurements in the DIII-D tokamak with applied 3D fields; good agreement is found for several cases. The new module can now be applied to the SPARC tokamak; a preliminary result for applied rotating 3D fields is shown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Source Physics Experiment (SPE) Science Plan (Version 2.4c)

The Source Physics Experiment (SPE) series is a long-term NNSA research and development effort designed to improve U.S. arms control and nuclear nonproliferation verification and monitoring capabilities. The findings from the SPE will advance the United States’ nuclear explosion monitoring capabilities, particularly with respect to detection, discrimination and determination of yields associated with small nuclear explosions that can be lost amid the noisy seismo-acoustic background from other sources. The data generated from the SPE, a series of well-designed and recorded chemical explosions, will contribute to the development and validation of first-principles explosive source generated seismo-acoustic modeling codes. These codes will then facilitate the update of semi-empirical methods, currently based on historic test site data, such that key explosion observables can be reproduced, thus improving confidence in nuclear test monitoring in new areas and/or under novel emplacement conditions. The overall SPE project is comprised of both the development of the new explosion simulation codes and the chemical explosion test series. The chemical explosion test series will generate the empirical data required to both develop and validate the new simulation codes.

58 GEOSCIENCES↗

The Source Physics Experiment (SPE) Science Plan

The Source Physics Experiment (SPE) series is a long-term NNSA research and development effort designed to improve U.S. arms control and nuclear nonproliferation verification and monitoring capabilities. The findings from the SPE will advance the United States’ nuclear explosion monitoring capabilities, particularly with respect to detection, discrimination and determination of yields associated with small nuclear explosions that can be lost amid the noisy seismo-acoustic background from other sources. The data generated from the SPE, a series of well-designed and recorded chemical explosions, will contribute to the development and validation of first-principles explosive source generated seismo-acoustic modeling codes. These codes will then facilitate the update of semi-empirical methods, currently based on historic test site data, such that key explosion observables can be reproduced, thus improving confidence in nuclear test monitoring in new areas and/or under novel emplacement conditions. The overall SPE project is comprised of both the development of the new explosion simulation codes and the chemical explosion test series. The chemical explosion test series will generate the empirical data required to both develop and validate the new simulation codes.

58 GEOSCIENCES↗

Measurement of Void Fraction Distribution in Steam-Water Two-Phase Flow in a 44 Bundle at 2 MPa

To contribute to the clarification of the Fukushima Daiichi Accident, JAEA is working on getting instantaneous void fraction distribution data in steam-water two-phase flow in rod bundle geometry under high pressure, high temperature condition, with using Wire Mesh Sensor (WMS) developed at JAEA for high pressure, high temperature condition (Up to 2.8 MPa, 230 deg. C), focusing on the low flow rate condition after the reactor scram. The data is expected to be used in the validation of the detailed two-phase flow codes TPFIT and ACE3D developed at JAEA. The time and space averaged void fraction data is also expected being used in the validation of the drift-flux models implemented in the two fluids codes, such as TRACE code. We are still in the middle of the data analyses and here we only report a part of the results. For the present bundle rod geometry, the void fraction shows easily gathered at the center area surrounded by 4 rods and the void fraction in the sub - channels between two adjacent rods are low. Under the same steam vapor flow rate condition, void faction increase with the decrease of the water flow rate. Under the same water flow rate, the void fraction increases with the increase of the steam vapor flow rate. In recent future, we will perform more experiments under further low water flow rate condition, including stagnation condition, to confirm this changing tendency. In the present experimental range, no effect of pressure on void fraction was observed. A 3-layer WMS, with a vertical distance between the adjacent layers of 1.3 mm, was used to measure the local instantaneous void fraction in this research. By using the correlation coefficient method, we can determine the time delay between the bubble detections from the upper and the lower layer sensors. Then the speed of the bubble, and its length, can be calculated. We are working on the establishment of the databank for the slug-churn bubbles information. (authors)

42 ENGINEERING↗

Development of phenomena identification and ranking table for Westinghouse lead fast reactor’s safety

The Westinghouse Lead-cooled Fast Reactor (LFR) is a medium-size, passively safe, economic, Gen-IV nuclear reactor. An important effort within the Westinghouse LFR program is the development of the safety analysis methodology, which comprises computer code development, model development, and experimental testing. A key initial task associated with the development of the safety analysis methodology is the identification of processes and phenomena that affect the plant's capability to meet selected safety performance indicators. This is accomplished through the development of a Phenomena Identification and Ranking Table (PIRT) for selected accident scenarios which, for this specific PIRT effort, included selected postulated design basis accidents and hypothetical beyond design basis accidents in LFRs. This paper describes the role of PIRT in the development of the Westinghouse LFR safety analysis methodology and the process used in the PIRT development. Specifically, the Westinghouse LFR PIRT assessed importance of pertinent phenomena and identified gaps in their knowledge-base by evaluating current modeling capabilities and data available for validation. The ultimate goal was to provide guidance on computer code development and validation efforts and to prioritize testing to support LFR design and licensing. The key phenomena and processes that are deemed highly important for the safety performance indicators, but for which the state of knowledge is low, are presented. The testing program and analyses development are planned to address significant phenomena in the PIRT.

Lead fast reactor↗

A new Gaussian MCTDH program: Implementation and validation on the levels of the water and glycine molecules

We report the main features of a new general implementation of the Gaussian Multi-Configuration Time-Dependent Hartree model. The code allows effective computations of time-dependent phenomena, including calculation of vibronic spectra (in one or more electronic states), relative state populations, etc. Moreover, by expressing the Dirac-Frenkel variational principle in terms of an effective Hamiltonian, we are able to provide a new reliable estimate of the representation error. After validating the code on simple one-dimensional systems, we analyze the harmonic and anharmonic vibrational spectra of water and glycine showing that reliable and converged energy levels can be obtained with reasonable computing resources. The data obtained on water and glycine are compared with results of previous calculations using the vibrational second-order perturbation theory method. Additional features and perspectives are also shortly discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Validation for 233U-Fueled Systems in KENO V.a in SCALE 6.2

Validation of the KENO V.a Monte Carlo code has been performed in recent years using benchmark experiments contained in the International Criticality Safety Benchmark Evaluation Project (ICSBEP) Handbook. The models used in these recent validation efforts have been drawn from the Verified, Archived Library of Inputs and Data (VALID). Models must be generated and reviewed by qualified individuals to be added to the VALID library, which leads to high confidence in the models and reduces the probability that apparent validation issues are a result of modeling errors. The contents of the VALID library are somewhat limited because of the effort involved in generating and reviewing models, so no 233U-fueled experiments are included in VALID. A large number of models of 233U experiments have been modeled in the past in support of the criticality safety of 233U in storage at Oak Ridge National Laboratory (ORNL). In June 2016, two midshipmen from the United States Naval Academy were assigned to ORNL, and they reviewed and updated these models for execution in SCALE 6.2. The validation of 233U is of interest because some discrepancies in SCALE results were identified by a beta tester at the Nuclear Energy Agency modeling these systems. These discrepancies were related to a data thinning procedure in the continuous-energy nuclear data process, and had been resolved prior to the release of SCALE 6.2

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Advancing Coal Catalytic Gasification to Promote Optimum Syngas Production

An investigation was pursued to improve the use of low rank sub-bituminous coal by using suitable catalysts to advance gasification and create cleaner synthesis gas. Bench- and pilot-scale experiments were performed to measure key reactive properties and verify the use of red mud catalyst. The experiments provided reaction data for the development of kinetic models and validation data for CFD simulations. The reaction kinetics were analyzed to provide an understanding of the major pathways involved and identify the necessary reaction mechanisms needed for the computational models. The reaction kinetics model was implemented into the computational fluid dynamics (CFD) code MFiX to simulate, predict and validate the chemistry model with the experiments. It was shown that red mud as a catalyst lowered methane formation during coal gasification. Additional benefits were that red mud destroyed tars formation, promoted water gas shift reaction resulting in a syngas rich in hydrogen. In the presence of red mud catalyst, biomass feedstocks high in ash did not form clinker in the fluidized bed because it prevented the formation of eutectic mixtures. The reaction kinetics model was reasonably robust and the CFD predictions using the model were in good agreement with the experiments.

01 COAL, LIGNITE, AND PEAT↗

Benchmark Modeling and Simulation of the FFTF LOFWOS Test #13 Using SAM

The Fast Flux Test Facility (FFTF) was a 400 MW thermal powered, oxide-fueled, liquid sodium cooled test reactor, built to assist development and testing of advanced fuels and materials for fast breeder reactors. In July 1986, a series of unprotected Loss of Flow Without Scram (LOFWOS) transients were performed in FFTF as part of the Passive Safety Testing (PST) program. The LOFWOS Test #13, which was initiated at 50% power and 100% flow with the pump pony motors left off, has been chosen as a benchmark case by IAEA to support collaborative efforts within international partnerships on the validation of simulation tools and models in the area of sodium fast reactor passive safety in an IAEA Coordinated Research Project (CRP), launched in October 2018. The System Analysis Module (SAM) is an advanced and modern system analysis tool under development at Argonne National Laboratory for advanced non-LWR safety analysis. It utilizes the object-oriented application framework MOOSE to leverage the modern software environment and advanced numerical methods. The capabilities of SAM are being extended to enable the transient modeling, analysis, and design of various advanced nuclear reactor systems. To participate the IAEA CRP and enhance the SAM validation base for advanced reactor transient safety analysis, benchmark simulations of the FFTF LOFWOS Test #13 are performed using the SAM code. In this first phase of the validation effort, the thermal-hydraulic behavior of the reactor system is the focus and the reactor kinetics is not considered in the SAM FFTF model. Instead, the results of Argonne’s neutronics calculations are directly used, including the power shape of the active core region and the power history during the transient. The simulation results of FFTF at steady state agreed well with the measured data from the test. During the transient, reasonably good agreement were also obtained. Future work to improve the model will focus on introducing the reactivity predictions into the model, as well as better understanding or resolving the current discrepancies with the measured data.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Procedure for Creating, Reviewing, and Submitting Input Files into the Benchmark Library

Los Alamos National Laboratory (LANL) has a number of criticality benchmark input files, modeled for use with MCNP, developed and maintained by various organizations including the Nuclear Criticality Safety (NCS) Division, XCP-3, and XCP-5. The purpose of this procedure is to standardize input file creation, review, and maintenance. This procedure incorporates existing practices used by IRSN as documented in the original report and the translation from French in addition to practices used by the LANL NCS Division as documented in. The report relates to input files used for the validation of the continuous energy Monte Carlo code MCNP6 but is general enough to be extended to other codes. This report describes the procedure on how to prepare and use benchmarks (taken mainly from the ICSBEP Handbook) for the validation of calculation routes. In particular, this report describes the procedure to follow in the creation of the input files and their integration in the experimental validation databases.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Large Matched-Index-of-Refraction (MIR) Flow Systems for Thermal Engineering Education

In recent international collaboration, Idaho National Laboratory (INL) and University of Erlangen-Nuremberg (UE) have developed large MIR flow systems which are ideal for joint graduate student education and research. The benefit of the MIR technique is that it permits optical measurements to determine flow characteristics in complex passages and around objects to be obtained without locating a disturbing transducer in the flow field and without distortion of the optical paths. The MIR technique is not new itself; others employed it earlier. The innovation of these MIR systems is their large size relative to previous experiments, yielding improved spatial and temporal resolution. This article will discuss the benefits of the technique, characteristics of the systems and some examples of their applications to complex situations. Typically their experiments have provided new fundamental understanding plus benchmark data for assessment and validation of computational thermal fluid dynamic codes.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Large Matched-Index-of-Refraction (MIR) Flow Systems for International Collaboration In Fluid Mechanics

In recent international collaboration, INL and Uni. Erlangen have developed large MIR flow systems which can be ideal for joint graduate student education and research. The benefit of the MIR technique is that it permits optical measurements to determine flow characteristics in complex passages and around objects to be obtained without locating a disturbing transducer in the flow field and without distortion of the optical paths. The MIR technique is not new itself; others employed it earlier. The innovation of these MIR systems is their large size relative to previous experiments, yielding improved spatial and temporal resolution. This report will discuss the benefits of the technique, characteristics of the systems and some examples of their applications to complex situations. Typically their experiments have provided new fundamental understanding plus benchmark data for assessment and possible validation of computational thermal fluid dynamic codes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗