Search NASA⌕ Search

SEARCH · Search NASA

Results for “compositional complexity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Assessing the Validity of the Simplified Potential Energy Clock Model for Modeling Glass-Ceramics

Glass-ceramic seals may be the future of hermetic connectors at Sandia National Laboratories. They have been shown capable of surviving higher temperatures and pressures than amorphous glass seals. More advanced finite-element material models are required to enable model-based design and provide evidence that the hermetic connectors can meet design requirements. Glass-ceramics are composite materials with both crystalline and amorphous phases. The latter gives rise to (non-linearly) viscoelastic behavior. Given their complex microstructures, glass-ceramics may be thermorheologically complex, a behavior outside the scope of currently implemented constitutive models at Sandia. However, it was desired to assess if the Simplified Potential Energy Clock (SPEC) model is capable of capturing the material response. Available data for SL 16.8 glass-ceramic was used to calibrate the SPEC model. Model accuracy was assessed by comparing model predictions with shear moduli temperature dependence and high temperature 3-point bend creep data. It is shown that the model can predict the temperature dependence of the shear moduli and 3- point bend creep data. Analysis of the results is presented. Suggestions for future experiments and model development are presented. Though further calibration is likely necessary, SPEC has been shown capable of modeling glass-ceramic behavior in the glass transition region but requires further analysis below the transition region.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Impact of Humidity and Temperature on the Stability of the Optical Properties and Structure of MAPbI3, MA0.7FA0.3PbI3 and (FAPbI3)0.95(MAPbBr3)0.05 Perovskite Thin Films

In situ real-time spectroscopic ellipsometry (RTSE) measurements have been conducted on MAPbI3, MA0.7FA0.3PbI3, and (FAPbI3)0.95(MAPbBr3)0.05 perovskite thin films when exposed to different levels of relative humidity at given temperatures over time. Analysis of RTSE measurements track changes in the complex dielectric function spectra and structure, which indicate variations in stability influenced by the underlying material, preparation method, and perovskite composition. MAPbI3 and MA0.7FA0.3PbI3 films deposited on commercial fluorine-doped tin oxide coated glass are more stable than corresponding films deposited on soda lime glass directly. (FAPbI3)0.95(MAPbBr3)0.05 films on soda lime glass showed improved stability over the other compositions regardless of the substrate, and this is attributed to the preparation method as well as the final composition.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Microwave-Assisted Preparation of Luminescent Inorganic Materials: A Fast Route to Light Conversion and Storage Phosphors

Luminescent inorganic materials are used in several technological applications such as light-emitting displays, white LEDs for illumination, bioimaging, and photodynamic therapy. Usually, inorganic phosphors (e.g., complex oxides, silicates) need high temperatures and, in some cases, specific atmospheres to be formed or to obtain a homogeneous composition. Low ionic diffusion and high melting points of the precursors lead to long processing times in these solid-state syntheses with a cost in energy consumption when conventional heating methods are applied. Microwave-assisted synthesis relies on selective, volumetric heating attributed to the electromagnetic radiation interaction with the matter. The microwave heating allows for rapid heating rates and small temperature gradients yielding homogeneous, well-formed materials swiftly. Luminescent inorganic materials can benefit significantly from the microwave-assisted synthesis for high homogeneity, diverse morphology, and rapid screening of different compositions. The rapid screening allows for fast material investigation, whereas the benefits of enhanced homogeneity include improvement in the optical properties such as quantum yields and storage capacity.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Methods for analyzing hydrocarbons and hydrocarbon blends for chemical compositions

The present invention is generally related to the analysis of chemical compositions of hydrocarbons and hydrocarbon blends. This method, in particular embodiments, may apply specifically to the problem of analyzing extremely complex hydrocarbon-containing mixtures when the number and diversity of molecules makes it extremely difficult or impossible to realistically identify and quantify them individually in a reasonable timeframe. Particular SEC (size exclusion chromatography)-based methods and apparatus disclosed herein may be used to measure, e.g., the molecular size, weight, and/or volume, whether in absolute or relative manner, of the various components of eluate from the SEC stationary phase (e.g., a permeable gel). This analytical method is applicable on a wide variety of hydrocarbonaceous materials, and especially useful for, but not limited to oil, maltenes of oil, asphalt binders and asphalt binder blends, which may contain wide varieties of different types of additives, modifiers, and chemistries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Radiation Effects in Next Generation Used Nuclear Fuel Reprocessing Strategies

With the global community committed to significantly expanding nuclear energy capacity, the development of efficient used nuclear fuel (UNF) management strategies has become more critical than ever. These strategies are vital to fostering the widespread adoption of closed fuel cycles, which are essential for sustainable nuclear energy production and security. Achieving this ambitious goal necessitates a comprehensive understanding of radiation effects on next-generation technologies, as radiolysis can often limit the longevity and performance of these systems. This seminar will provide an overview of next-generation UNF reprocessing strategies, highlighting the latest advancements and innovative approaches in the field. Particular attention will be given to two key areas of recent research: 1. Radiation robustness and performance of advanced sulfur chloride-based chlorination technologies. We will explore the efficacy of sulfur chloride-based chlorination processes in the presence of surrogate cladding materials, specifically aluminum. These processes have shown promise in the dissolution, decontamination, and recovery of cladding materials for reuse. Detailed findings on how the composition and performance of these sulfur chloride solvents respond to radiation exposure will be discussed. 2. Impacts of metal ion complexation and direct dissolution conditions on monoamide-based reprocessing strategies. We will delve into the time-resolved and dose accumulation effects of irradiation on the direct dissolution of voloxidized uranium and rhenium using N,N-di-(2-ethylhexyl) butyramide (DEHBA) or N,N-di-(2-ethylhexyl)isobutyramide (DEHiBA) in pre-equilibrated n-dodecane solvent. The implications of these interactions on dissolution efficiency, radiolytic stability, and overall process performance will be examined. These studies aim to underscore the importance of understanding radiation effects in the development of next-generation UNF reprocessing technologies and the global transition towards more sustainable and efficient nuclear energy systems.

38 - RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCL↗
DOE OSTI2021

Substrate-controlled dynamics of spin qubits in low dimensional van der Waals materials

We report a theoretical study of the coherence dynamics of spin qubits in two-dimensional materials (2DMs) and van der Waals heterostructures, as a function of the host thickness and the composition of the surrounding environment. We focus on MoS2 and WS2, two promising systems for quantum technology applications, and we consider the decoherence arising from the interaction of the spin qubit with nuclear spins. We show that the Hahn-echo coherence time is determined by a complex interplay between the source of decoherence in the qubit host and in the environment, which in turn determines whether the noise evolution is in a classical or quantum mechanical regime. We suggest that the composition and thickness of van der Waals heterostructures encapsulating a qubit host can be engineered to maximize coherence times. Finally, we discuss how quantum sensors may be able to probe the dynamics of the nuclear bath in 2DMs.

Onizhuk, Mykyta (ORCID:0000000304344575)↗
DOE OSTI2023

A Level Set Model for Structured Mesh Representation of Fibrous Preforms used in Composites Manufacturing

Here, a model for implicit representation of fibrous and woven preforms used for composites manufacturing is described. The method is based on a level set function defined on a structured mesh to implicitly capture the complex fiber and weave geometries. Since most software packages used to model woven preforms are based on unstructured mesh, a numerical model for transforming a discretized surface to a structured mesh representation and vice-a-versa is presented. Specific emphasis is on scalable computation of a level set function for large and complex 3D woven structures from a triangulated surface of the smallest unit (yarn). The model is applied to capture a periodic 3D layered 5-harness satin (5HS) weave geometry on a structured mesh. Geometric transformations needed to efficiently compute the level set function for the 3D structure on a high resolution mesh are described. Effects of mesh resolution on the geometric features such as number of resolved fibers, effective fiber size, and the surface area to volume ratio of the iso-surface are analyzed. Using the distance property of the level set function, an approach to evaluate the structure function resulting from transient evolving topology representing densification due to matrix phase depositions is also presented. The approach captures transition of the geometric characteristic from fiber governed at early stages of densification to yarn governed at the terminal stage.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Pinning of energy transitions of defects, complexes, and surface states in AlGaN alloys

In this work, we determine the dependence of the defect transition energies, electronic bands, and surface charge neutrality levels in AlGaN. With Vacuum level as reference, we show that energy transitions of localized defects and the surface Fermi level are independent of the alloy composition as electronic bands diverge with the increase in the bandgap as a function of alloy composition. The invariance of localized states on the alloy composition creates a convenient internal reference energy with respect to which other energy states may be measured. We demonstrate a higher generality to the universality rule with the independence of deep transition states of otherwise shallow donor type defects [(+1/+3) transition for VN] and defect complexes (C N +Si III ) in addition to the earlier predicted independent nature of mid-gap states when they are either the antibonding state between cationic impurities and host anion or acceptors at anion sites.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Complex Pupil Masks for Aberrated Imaging of Closely Spaced Objects

Current approach demonstrates the suppression of optical side-lobes and the contraction of the main lobe in the composite image of two object points of the optical system under the influence of defocusing effect when an asymmetric phase edges are imposed over the apodized circular aperture. The resolution of two point sources having different intensity ratio is discussed in terms of the modified Sparrow criterion, functions of the degree of coherence of the illumination, the intensity difference and the degree of asymmetric phase masking. Here we have introduced and explored the effects of focus aberration (defect-of-focus) on the two-point resolution of the optical systems. Results on the aberrated composite image of closely spaced objects with amplitude mask and asymmetric phase masks forms a significant contribution in astronomical and microscopic observations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Vibrational spectroscopy for imaging single microbial cells in complex biological samples

Here, vibrational spectroscopy is increasingly used for the rapid and non-destructive imaging of environmental and medical samples. Both Raman and Fourier-transform infrared (FT-IR) imaging have been applied to obtain detailed information on the chemical composition of biological materials, ranging from single microbial cells to tissues. Due to its compatibility with methods such as stable isotope labeling for the monitoring of cellular activities, vibrational spectroscopy also holds considerable power as a tool in microbial ecology. Chemical imaging of undisturbed biological systems (such as live cells in their native habitats) presents unique challenges due to the physical and chemical complexity of the samples, potential for spectral interference, and frequent need for real-time measurements. This Mini Review provides a critical synthesis of recent applications of Raman and FT-IR spectroscopy for characterizing complex biological samples, with a focus on developments in single-cell imaging. We also discuss how new spectroscopic methods could be used to overcome current limitations of singlecell analyses. Given the inherent complementarity of Raman and FT-IR spectroscopic methods, we discuss how combining these approaches could enable us to obtain new insights into biological activities either in situ or under conditions that simulate selected properties of the natural environment.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Magnetic Spectra of Soft Magnetic Composites Based on Fe-Si-Cr-B Amorphous and Carbonyl-Iron Powders

Fe–Si–Cr–B amorphous and carbonyl-iron powders insulated with phosphoric acid solution were used to prepare soft magnetic composites. The mass ratios of phosphoric acid insulation solution and the carbonyl-iron powder dependences of the magnetic spectrum, the density, and the resistivity were studied. Both the real part and the imaginary part of the core’s complex permeability increased after an initial decrease with the acid mass ratio increasing. This is similar to the variation tendency of the core’s density and opposite to the variation tendency of the core’s resistivity. The amount of the air gap, reflected by the density, was proposed to be the most important factor that has a great influence on the composite’s magnetic properties. The increase of the air gap reduced the effective demagnetizing field and the resistivity. This improved the permeability and the hysteresis loss and deteriorated the eddy-current loss. Carbonyl-iron powder addition was found to improve the moldability and the permeability of the composite based on the Fe-Si-Cr-B amorphous powder, although its loss was higher than that of the amorphous powder. All these findings can be referenced when designing an amorphous-based soft magnetic composite (SMC) core with balanced permeability, loss, and cost for high-frequency inductor within a MHz band.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Summer Aerosol and Trace Gas Observations in Houston, Texas Using an Adaptable Mobile Facility

An aerosol container featuring a shared inlet system was deployed to Houston, Texas in July 2022, enabling direct, high-time-resolution in situ measurements of aerosols and trace gases. The internal rack system and floorplan was designed for adaptable modularity to elucidate aerosol physicochemical processes at fine scales. The design allowed for the deployment of a core instrument suite and additional customized research grade instruments. A heterogeneous mixture of aerosols was observed during three regimes: (1) intermittent black carbon (BC) and diurnal variations in aerosol chemical composition, (2) observed particle growth associated with SO 2 , (3) transported supermicron dust. The high variability of observed particles and gases in high time resolution indicated a complex urban area with multiple local and regional sources and processes. Particle growth rates of 7–16 nm/hr were observed for submicron particles during periods when SO 2 was >0.5 ppbv. Two periods of multi-day long-range transport events of dust from the African Sahara were observed in the supermicron and submicron particle modes with total mass concentrations up to 30 μg m −3 . Aerosol scattering angstrom exponents and extinction coefficients (B ext ) increased with humidity as a function of particle composition. The measurements demonstrate collaborative capabilities that can be used to increase observations of aerosol processing, microphysical and optical properties, internal mixing state, and supermicron aerosol that are not parameterized or missing in global Earth energy system models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Mechanically-, Thermally, and Chemically-Robust High-Temperature Ceramic Composites

In an effort to lower the levelized cost of electricity generated by Concentrated Solar Power (CSP) plants, the heat-to-electricity conversion efficiency may be increased by operating such plants with higher turbine inlet temperatures using closed Brayton cycles with high-pressure, supercritical carbon dioxide (sCO 2 ) as the working fluid. For example, if the turbine inlet temperature is raised to ≥750°C, in combination with sCO2 closed Brayton cycles, the relative heat-to-electricity efficiency may be raised by more than 20% (compared to subcritical steam Rankine cycles operating with turbine inlet temperatures ≤550°C). The associated reduction in the cost of dispatchable electricity from such CSP plants (utilizing high-temperature thermal energy storage) would be an important breakthrough on the path towards direct competition with fossil-fuel-based plants. A key barrier to achieve such high-temperature efficient operation has been the limited thermomechanical performance of metal alloys used in compact, primary printed circuit- type heat exchangers (PCHEXs) for heat transfer to high-pressure sCO 2 . The maximum allowed stresses for the use of conventional stainless steels and nickel-based superalloys at high sCO 2 pressures (≥20 MPa) decline rapidly at temperatures ≥550°C. This project has been focused on demonstrating the desired high-temperature properties and attractive manufacturing characteristics of mechanically-, thermally-, and chemically-robust ceramic/metal composites (cermets), in order to allow for the use of such composites in primary PCHEXs for heat transfer to sCO 2 at ≥750°C and ≥20 MPa in CSP plants. Prior work with high-temperature, co-continuous carbide/refractory metal cermets, such as ZrC/W composites, has already demonstrated: i) the attractive combination of high-temperature properties exhibited by such materials (e.g., high values of stiffness, failure strength, and thermal conductivity at 800°C), and ii) cost-effective processes for manufacturing PCHEX plates comprised of such cermets with tailorable channel patterns. However, ZrC/W cermets were not found to be inherently corrosion resistant in sCO 2 at 750°C and 20 MPa. While the application of a Cu coating to ZrC/W surfaces, along with a modest addition (50 ppm) of CO to CO 2 , rendered such composites resistant to corrosion for 1000 h in such sCO 2 -based fluids at 750°C, such additional steps would increase the design complexity of such cermet-based components. An alternative approach (the focus of this project) is to develop mechanically-robust, cost- effective cermets that are inherently resistant to high-temperature oxidation in air and CO 2 . The overall goals of this project have been to demonstrate: i) the oxidation resistance of at least one cermet at 750°C in air and in CO 2 (i.e., with a projected annual corrosion ≤30 μm), ii) the mechanically robust nature of at least one cermet at 750°C (i.e., with an average failure strength ≥200 MPa), and iii) that the selected cermet can be manufactured via low-cost forming techniques.

14 SOLAR ENERGY↗
DOE OSTI2020

Grand canonical inverse design of multicomponent colloidal crystals

Inverse design methods are powerful computational approaches for creating colloidal systems which self-assemble into a target morphology by reverse engineering the Hamiltonian of the system. Despite this, these optimization procedures tend to yield Hamiltonians which are too complex to be experimentally realized. An alternative route to complex structures involves the use of several different components, however, conventional inverse design methods do not explicitly account for the possibility of phase separation into compositionally distinct structures. We present an inverse design scheme for multicomponent colloidal systems by combining active learning with a method to directly compute their ground state phase diagrams. This explicitly accounts for phase separation and can locate stable regions of Hamiltonian parameter space which grid-based surveys are prone to miss. Using this we design low-density, binary structures with Lennard-Jones-like pairwise interactions that are simpler than in the single component case and potentially realizable in an experimental setting. This reinforces the concept that ground states of simple, multicomponent systems might be rich with previously unappreciated diversity, enabling the assembly of non-trivial structures with only few simple components instead of a single complex one.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Mechanism of the unusual substituent exchange in the reactions of alkylene oxides with organic compounds bearing β-hydroxyalkyl groups at heteroatoms S, Se, N, and P

The review summarizes the data on the study of the unusual exchange reaction between alkylene oxides and organic compounds of groups 15 and 16 of the Periodic Table bearing β-hydroxyalkyl substituents at the S, Se, N, and P heteroatoms. Despite the apparent identity of one of the starting reagents and the reaction product (retention of the three-membered ring), the structures of the formed alkylene oxide and organic compound with β-hydroxyalkyl group at the heteroatom differ from the structures of the starting materials. Using β-hydroxyalkyl sulfides as a model, the plausible mechanisms of the exchange reactions were discussed taking into account the change in the reaction order in β-hydroxyalkyl sulfide with its concentration increase. Irrespectively of the mechanism, the first stage of the reaction is the formation of an intermediate H-complex due to the H-bond formation between the OH sulfide group and the alkylene oxide oxygen atom and subsequent (for the dilute solutions) monomolecular intracomplex transformation of this H-complex. The mechanism was confirmed by semi-empirical quantum chemical calculations. In the case of concentrated solutions of β-hydroxyalkyl sulfides, possibility of the formation of intermediate sulfonium salt was discussed. Each pathway proceeds via its unique intermediates and transition states but the final stage results in the same intermediate bipolar ion with an intramolecular H-bond thus leading to the same nature and compositions of the reaction products for all reaction pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

SSR COST – COmposite Structural Technologies for advanced reactor deployment (Final Scientific/Technical Report)

Moltex is designing a Generation 4 or Advanced nuclear reactor, the molten salt fast spectrum SSR-W. The design intent is to reduce the cost and complexity of the nuclear systems by relying on inherent safety characteristics, instead of engineered systems. One such characteristic as a natural tendency for power to decrease as temperature increases. Another characteristic that improves natural safety is the fact that the working fluids (molten salts) are at atmospheric pressure at operating temperatures. This significantly reduces the need for pressure boundary components and systems. Moltex is highly motivated to develop simple and economic reactors to reduce the carbon intensity and improve energy security of global electricity production. The COST project investigated the opportunities for reducing construction cost of advanced reactors with the adoption of Rigid Elastic Composite Civil works (RECC). The construction design and methods used in currently operational light water power plants would generally be suboptimal for the SSR-W since there is no requirement for civil structures to withstand high pressure accidents such as hydrogen combustion or steam explosion. In parallel to downselecting the most promising RECC-type technology, accident scenarios representing the largest credible challenge to the SSR-W civil and construction design were modelled. The capability of an SSR-W reactor constructed with and without the selected construction technology was evaluated and the consequential licensing challenges identified. A construction schedule and cost estimate of the SSR-W with and without the selected RECC construction technology was developed. Once the above data was collected, then Moltex was able to review the safety performance, license-ability and cost/schedule benefit of applying the preferred construction technology. The CAPEX/NPV benefit was quantified, and the licensing risks and opportunities were documented. Finally, the CAPEX/NPV benefit of the advanced construction technology was modest due to the suitability of traditional stick-built construction for the SSR-W design. However, previously unidentified benefits of the advanced construction technology were revealed during the studies that could credibly de-risk certain aspects of the design to be licensed. Since licensing (duration and delays) are very significant in new build project costs, the cost benefits may be significant. Further studies on the risk reduction of the construction technology are foreseen.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

Stability of aqueous neodymium complexes in carbonate-bearing solutions from 100–600 °C

Rare earth element exploration requires a quantitative understanding of factors governing their mobilization and economic concentration. However, the behavior of rare earth elements in carbonate- bearing hydrothermal fluids associated with carbonatite-hosted deposits is poorly understood, and conflicting mechanisms of rare earth transport by anionic ligands and alkali behavior have been described. Here, we report quantitative data to characterize the role of carbonate-bearing solutions in the hydrothermal mobilization of neodymium. Solubility studies of neodymium phosphate were performed at temperatures ranging from 100 to 600 °C in carbonate-bearing solutions. The thermodynamic data determined for the predominant complex were used to model the separation of neodymium from thorium in a simple flow-through system based on fluid and mineral compositions characteristic of carbonatite deposits. Our data suggest that neodymium transport is controlled by the stability of the carbonate species NdCO 3 OH o , and at temperatures of 500–600 °C, the concentrations of neodymium in solutions can reach ~1000 ppm.

58 GEOSCIENCES↗
DOE OSTI2018

Cadmium(II) complexes with monoiodo- and dibromodipyrromethenes: synthesis, molecular structure, spectral-luminescent properties, and stability in solutions

Cadmium(II) chelates with 4-iodo-, 5,5´-, and 4,4´-dibromo-2,2´-dipyrromethenes (HL{sup 1}, HL{sup 2}, and HL{sup 3}, respectively) with the composition of [CdL{sub 2}] were synthesized. The influence of structural features of their molecules and properties of the medium on the characteristics of absorption and fluorescence spectra, and also on the thermodynamic stability constants in solutions was evaluated. The results of quantum chemical calculations revealed that the additional coordination interactions between the bromine atoms at the α-positions of dipyrromethene ligands and the complexing atom are possible in the molecular structure of α,α´- dibromosubstituted dipyrromethenate [Cd(L{sup 2}){sub 2}] in contrast with β-halogenated analogues [Cd(L{sup 1}){sub 2}] and [Cd(L{sup 3}){sub 2}].

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗