Search NASA⌕ Search

SEARCH · Search NASA

Results for “content analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

NEW APPROACH TO ADDRESSING GAS GENERATION IN RADIOACTIVE MATERIAL PACKAGING

Safety Analysis Reports for Packaging (SARP) document why the transportation of radioactive material is safe in Type A(F) and Type B shipping containers. The content evaluation of certain actinide materials require that the gas generation characteristics be addressed. Most packages used to transport actinides impose extremely restrictive limits on moisture content and oxide stabilization to control or prevent flammable gas generation. These requirements prevent some users from using a shipping container even though the material to be shipped is fully compliant with the remaining content envelope including isotopic distribution. To avoid these restrictions, gas generation issues have to be addressed on a case by case basis rather than a one size fits all approach. In addition, SARP applicants and review groups may not have the knowledge and experience with actinide chemistry and other factors affecting gas generation, which facility experts in actinide material processing have obtained in the last sixty years. This paper will address a proposal to create a Gas Generation Evaluation Committee to evaluate gas generation issues associated with Safety Analysis Reports for Packaging material contents. The committee charter could include reviews of both SARP approved contents and new contents not previously evaluated in a SARP.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nondestructive hydrogen analysis of steam-oxidized Zircaloy-4 by wide-angle neutron scattering

In this study, a nondestructive neutron scattering method to precisely measure the hydrogen content in high-temperature steam-oxidized Zircaloy-4 cladding was developed. Zircaloy-4 cladding was used to produce hydrided specimens with hydrogen content up to ≈500 wppm. Following hydrogen charging, the hydrogen content of the hydrided specimens was measured using the vacuum hot extraction method, by which the samples with desired hydrogen concentrations were selected for the neutron study. The hydrided samples were then oxidized in steam up to ≈6.0wt. % at 1100°C. Optical microscopy shows that our hydriding procedure results in uniform distribution of circumferential hydrides across the wall thickness, and uniform oxide layers were formed on the sample surfaces by the steam oxidation. Small- and wide-angle neutron scattering were simultaneously performed to provide a quick (less than an hour per sample) measurement of the hydrogen content in various types of hydrided and oxidized Zircaloy-4. Our study demonstrates that the hydrogen in pre-oxidized Zircaloy-4 cladding can be measured very accurately by both small- and wide-angle neutron scattering. For steam-oxidized samples, the small-angle neutron scattering is contaminated with coherent scattering from additional structural features induced by the steam oxidation. However, the scattering intensity of the wide-angle neutron scattering increases proportionally with the hydrogen charged in the samples. The hydrogen content and wide-angle neutron scattering intensity are highly linearly correlated for the oxidized cladding samples examined in this work, and can be used to precisely determine the hydrogen content in steam-oxidized Zircaloy-4 samples. Hydrogen contents determined by neutron scattering of oxidation samples were also found to be consistent with the results of chemical analysis within acceptable margins for error.

36 MATERIALS SCIENCE↗

Purification and preparation of graphite oxide from natural graphite

Graphite oxide has attracted much interest as a possible route for preparation of natural graphite in the large-scale production and manipulation of graphene as a material with extraordinary electronic properties. Graphite oxide was prepared by modified Hummers method from purified natural graphite sample from West Kalimantan. We demonstrated that natural graphite is well-purified by acid leaching method. The purified graphite was proceed for intercalating process by modifying Hummers method. The modification is on the reaction time and temperature of the intercalation process. The materials used in the intercalating process are H{sub 2}SO{sub 4} and KMNO{sub 4}. The purified natural graphite is analyzed by carbon content based on Loss on Ignition test. The thermo gravimetricanalysis and the Fouriertransform infrared spectroscopy are performed to investigate the oxidation results of the obtained GO which is indicated by the existence of functional groups. In addition, the X-ray diffraction and energy dispersive X-ray spectroscopy are also applied to characterize respectively for the crystal structure and elemental analysis. The results confirmed that natural graphite samples with 68% carbon content was purified into 97.68 % carbon content. While the intercalation process formed a formation of functional groups in the obtained GO. The results show that the temperature and reaction times have improved the efficiency of the oxidation process. It is concluded that these method could be considered as an important route for large-scale production of graphene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of Relationships between Growth Rate, Tree Size, Lignocellulose Composition, and Enzymatic Saccharification in Interspecific Corymbia Hybrids and Parental Taxa

In order for a lignocellulosic bioenergy feedstock to be considered sustainable,it must possess a high rate of growth to supply biomass for conversion. Despite the desirability of a fast growth rate for industrial application,it is unclear what effect growth rate has on biomass composition or saccharification. We characterized Klason lignin,glucan,and xylan content with response to growth in Corymbia interspecific F1 hybrid families (HF) and parental species Corymbia torelliana and C. citriodora subspecies variegata and measured the effects on enzymatic hydrolysis from hydrothermally pretreated biomass. Analysis of biomass composition within Corymbia populations found similar amounts of Klason lignin content (19.7–21.3%) among parental and hybrid populations,whereas glucan content was clearly distinguished within C. citriodora subspecies variegata (52%) and HF148 (60%) as compared to other populations (28–38%). Multiple linear regression indicates that biomass composition is significantly impacted by tree size measured at the same age,with Klason lignin content increasing with diameter breast height (DBH) (+0.12% per cm DBH increase),and glucan and xylan typically decreasing per DBH cm increase (-0.7 and -0.3%,respectively). Polysaccharide content within C. citriodora subspecies variegata and HF-148 were not significantly affected by tree size. High-throughput enzymatic saccharification of hydrothermally pretreated biomass found significant differences among Corymbia populations for total glucose production from biomass,with parental Corymbia torelliana and hybrids HF-148 and HF-51 generating the highest amounts of glucose (~180 mg/g biomass,respectively),with HF-51 undergoing the most efficient glucan-to-glucose conversion (74%). Based on growth rate,biomass composition,and further optimization of enzymatic saccharification yield,high production Corymbia hybrid trees are potentially suitable for fast-rotation bioenergy or biomaterial production.

60 APPLIED LIFE SCIENCES↗

Calorimetric detection of neutral-atom content of ion beam

Energy deposition technique deduces neutral-beam flux or dose from measured values of incremental resistance increases in platinum wire passed through beam. Steady-state heat balance analysis led to equivalent neutral-beam current. Method was used to detect neutral-atom content of 60-keV argon ion beam.

Roberts, A. S., Jr.↗

Cosmogenic Mn-53 in meteorites

The distributions of the Mn-53 contents in 106 nonantarctic and 112 antarctic chondrites were analyzed. A correlation analysis of these distributions showed that the correlation coefficient is a maximum r sub max = 0.75 plus or minus 0.03) when the histogram for antarctic chondrites is displaced by 40 plus or minus 8 dpm kg-1Fe towards lower Mn-53 contents. The distribution of Mn-53 saturated contents in nonantarctic ordinary chondrites was investigated as a function of their radiation age (T). It is found that the Mn-53 average content is higher by (21 plus or minus 9)% in H-chondrites with radiation age T approximately 12 Myr than in thse with T 12 Myr. This effect can be attributed to the fact that a considerable proportion of H-chondrites with T 12 Myr originates from a comet or from the objects of Chiron like, with the orbits more inclined to the ecliptic plane and/or more extended, which caused their irradiation by cosmic rays of higher intensity.

Alexeev, V. A.↗

Validation of Shadowgraph Spectral Analysis using an SLS Block 2 Wind-Tunnel Model

A flow quantification method has previously been developed that uses high-speed shadowgraph images to extract frequency content of a transonic flow field around a wind-tunnel model. In this method, a classical spectral analysis is performed on a set of shadowgraph image pixels to identify their intensity fluctuation frequencies. The spatial change of the image intensity is related to the second derivative of the density gradient. Examining the change of the density gradient as a function of time can be used to understand the flow field pressure fluctuations. Pressure measurements collected during a Booster Obsolescence Life Extension Forward Attachment Structure Trade Study Test are used to calibrate the shadowgraph-based measurements. The test was performed at the NASA Ames Research Center Unitary Plan Wind Tunnel 11- by 11-foot test section and investigated aerodynamic environment downstream of various booster forward attachment hardware geometries of the Space Launch System Block 2 Cargo configuration. Time-correlated shadowgraph video and model surface pressure measurements were acquired during the test and served as an ideal opportunity to calibrate and validate the shadowgraph image intensity method.

Shadowgraph↗

Validation of Shadowgraph Spectral Analysis using an SLS Block 2 Wind-Tunnel Model

A flow quantification method has previously been developed that uses high-speed shadowgraph images to extract frequency content of a transonic flow field around a wind-tunnel model. In this method, a classical spectral analysis is performed on shadowgraph video pixels to identify their intensity fluctuation frequencies. The spatial change of the image intensity is related to the second derivative of the density gradient. Examining the change of the density gradient as a function of time can be used to understand the flow-field pressure fluctuations. Time-varying pressure measurements collected during a Space Launch System (SLS) unsteady aerodynamic test of an advanced Block 2 booster design are used to calibrate the shadowgraph-based measurements. The test was performed at the NASA Ames Research Center Unitary Plan Wind Tunnel 11- by 11-foot test section and investigated the aerodynamic environment downstream of candidate booster forward attachment hardware geometries of the SLS Block 2 Cargo configuration. Time-correlated shadowgraph video and model surface pressure measurements were acquired during the test and served as an ideal opportunity to calibrate and validate the shadowgraph image intensity method.

Shadowgraph↗

Validation of Shadowgraph Spectral Analysis using an SLS Block 2 Wind-Tunnel Model

A flow quantification method has previously been developed that uses high-speed shadowgraph images to extract frequency content of a transonic flow field around a wind-tunnel model. In this method, a classical spectral analysis is performed on shadowgraph video pixels to identify their intensity fluctuation frequencies. The spatial change of the image intensity is related to the second derivative of the density gradient. Examining the change of the density gradient as a function of time can be used to understand the flow-field pressure fluctuations. Time-varying pressure measurements collected during a Space Launch System (SLS) unsteady aerodynamic test of an advanced Block 2 booster design are used to calibrate the shadowgraph-based measurements. The test was performed at the NASA Ames Research Center Unitary Plan Wind Tunnel 11- by 11-foot test section and investigated the aerodynamic environment downstream of candidate booster forward attachment hardware geometries of the SLS Block 2 Cargo configuration. Time-correlated shadowgraph video and model surface pressure measurements were acquired during the test and served as an ideal opportunity to calibrate and validate the shadowgraph image intensity method.

Shadowgraph↗

Data for Application of Time-Domain 1H NMR for Investigating Dynamics of Vegetative Lipids in Bioenergy Crops at Different Developmental Stages

Sweet sorghum is typically cultivated for the food and fodder market. Recently, sweet sorghum varieties are being metabolically transitioned to enhance energy density by accumulating oil droplets in their vegetative tissues for bioenergy applications. Owing to the high biomass yield of sorghum, the transgenic lines can compete with oil-seed crops for biodiesel yield per unit area. In the initial phase of transgenic development, a high-throughput phenotyping method can bridge the gap between the production pipeline and analysis to improve the efficiency of the process. To meet the requirement, the present study extends the application of time-domain 1H-NMR spectroscopy for rapid quantification and characterization of the total in-situ lipids of sweet sorghum ‘ramada’ to lay the groundwork for analyzing the upcoming large quantity of transgenic samples. NMR technology has been successfully established for analyzing lipid contents of vegetative tissues of non-transgenic variety. The multiexponential analysis of spin-lattice (T1) relaxation spectra obtained from TD-NMR aided the investigation of the dynamics of the free and bound lipid fraction with plant development. The total lipid concentration of bagasse and leaves of non-transgenic sweet sorghum remained unchanged throughout the plant development. Leaves displayed a higher percentage of bound lipids as compared to bagasse. A significant variation in the lipid concentration of juice was observed at the different growth stages with a maximum lipid accumulation of 1.21 ± 0.04% w/w at the boot stage that decreased with further maturity of the plant.

Biomass Analytics↗

Human Health Risk Assessment Methods for PV, Part 1: Fire Risks

The photovoltaic (PV) industry has experienced rapid growth in recent years due in part to the development of public policies to address climate change and energy security. Some industry stakeholders have expressed concerns regarding potential human inhalation exposure to hazardous materials should a PV module array be exposed to fire, particularly in a residential or commercial rooftop application. To evaluate these concerns, fire hazard analysis methods are presented that can estimate emissions that may occur when PV modules (hereafter mostly referred to simply as 'modules') are exposed to fire, estimate the associated chemical concentrations in ambient air downwind from the fire, and finally compare these exposure-point concentrations to health-protective screening levels. Specifically, this report presents an analysis of potential human health impacts associated with chemical release from modules during a building fire for three PV technologies, focusing on airborne release of the highest-prioritized chemical element for each: Pb content in crystalline-silicon (c-Si) modules, Cd content in thin film cadmium telluride (CdTe) modules, and Se content in thin film copper indium selenide (CIS) modules. The intent of this analysis is to demonstrate the application of the proposed methods for modules exposed to fire in a quantitative yet illustrative manner. In particular, this report quantifies what are expected to be the worst-case potential health impacts over a wide range of possible conditions, including building/fire size, downwind receptor location, exposure duration, and meteorological conditions, utilizing a Gaussian plume modeling approach that is typically used in regulatory contexts.

14 SOLAR ENERGY↗

Application of Time-Domain 1 H NMR for Investigating Dynamics of Vegetative Lipids in Bioenergy Crops at Different Developmental Stages

Sweet sorghum is typically cultivated for the food and fodder market. Recently, sweet sorghum varieties are being metabolically transitioned to enhance energy density by accumulating oil droplets in their vegetative tissues for bioenergy applications. Owing to the high biomass yield of sorghum, the transgenic lines can compete with oil-seed crops for biodiesel yield per unit area. In the initial phase of transgenic development, a high-throughput phenotyping method can bridge the gap between the production pipeline and analysis to improve the efficiency of the process. To meet the requirement, the present study extends the application of time-domain 1 H-NMR spectroscopy for rapid quantification and characterization of the total in-situ lipids of sweet sorghum ‘ramada’ to lay the groundwork for analyzing the upcoming large quantity of transgenic samples. NMR technology has been successfully established for analyzing lipid contents of vegetative tissues of non-transgenic variety. The multiexponential analysis of spin-lattice (T 1 ) relaxation spectra obtained from TD-NMR aided the investigation of the dynamics of the free and bound lipid fraction with plant development. The total lipid concentration of bagasse and leaves of non-transgenic sweet sorghum remained unchanged throughout the plant development. Leaves displayed a higher percentage of bound lipids as compared to bagasse. Here, a significant variation in the lipid concentration of juice was observed at the different growth stages with a maximum lipid accumulation of 1.21 ± 0.04% w/w at the boot stage that decreased with further maturity of the plant.

59 BASIC BIOLOGICAL SCIENCES↗

Reactive sputtering of δ-ZrH{sub 2} thin films by high power impulse magnetron sputtering and direct current magnetron sputtering

Reactive sputtering by high power impulse magnetron sputtering (HiPIMS) and direct current magnetron sputtering (DCMS) of a Zr target in Ar/H{sub 2} plasmas was employed to deposit Zr-H films on Si(100) substrates, and with H content up to 61 at. % and O contents typically below 0.2 at. % as determined by elastic recoil detection analysis. X-ray photoelectron spectroscopy reveals a chemical shift of ∼0.7 eV to higher binding energies for the Zr-H films compared to pure Zr films, consistent with a charge transfer from Zr to H in a zirconium hydride. X-ray diffraction shows that the films are single-phase δ-ZrH{sub 2} (CaF{sub 2} type structure) at H content >∼55 at. % and pole figure measurements give a 111 preferred orientation for these films. Scanning electron microscopy cross-section images show a glasslike microstructure for the HiPIMS films, while the DCMS films are columnar. Nanoindentation yield hardness values of 5.5–7 GPa for the δ-ZrH{sub 2} films that is slightly harder than the ∼5 GPa determined for Zr films and with coefficients of friction in the range of 0.12–0.18 to compare with the range of 0.4–0.6 obtained for Zr films. Wear resistance testing show that phase-pure δ-ZrH{sub 2} films deposited by HiPIMS exhibit up to 50 times lower wear rate compared to those containing a secondary Zr phase. Four-point probe measurements give resistivity values in the range of ∼100–120 μΩ cm for the δ-ZrH{sub 2} films, which is slightly higher compared to Zr films with values in the range 70–80 μΩ cm.

36 MATERIALS SCIENCE↗

Genome-based analysis for the bioactive potential of Streptomyces yeochonensis CN732, an acidophilic filamentous soil actinobacterium

Background: Acidophilic members of the genus Streptomyces can be a good source for novel secondary metabolites and degradative enzymes of biopolymers. In this study, a genome-based approach on Streptomyces yeochonensis CN732, a representative neutrotolerant acidophilic streptomycete, was employed to examine the biosynthetic as well as enzymatic potential, and also presence of any genetic tools for adaptation in acidic environment. Results: A high quality draft genome (7.8Mb) of S. yeochonensis CN732 was obtained with a G+C content of 73.53% and 6549 protein coding genes. The in silico analysis predicted presence of multiple biosynthetic gene clusters (BGCs), which showed similarity with those for antimicrobial, anticancer or antiparasitic compounds. However, the low levels of similarity with known BGCs for most cases suggested novelty of the metabolites from those predicted gene clusters. The production of various novel metabolites was also confirmed from the combined high performance liquid chromatography-mass spectrometry analysis. Through comparative genome analysis with related Streptomyces species, genes specific to strain CN732 and also those specific to neutrotolerant acidophilic species could be identified, which showed that genes for metabolism in diverse environment were enriched among acidophilic species. In addition, the presence of strain specific genes for carbohydrate active enzymes (CAZyme) along with many other singletons indicated uniqueness of the genetic makeup of strain CN732. The presence of cysteine transpeptidases (sortases) among the BGCs was also observed from this study, which implies their putative roles in the biosynthesis of secondary metabolites. Conclusions: This study highlights the bioactive potential of strain CN732, an acidophilic streptomycete with regard to secondary metabolite production and biodegradation potential using genomics based approach. The comparative genome analysis revealed genes specific to CN732 and also those among acidophilic species, which could give some insights into the adaptation of microbial life in acidic environment.

59 BASIC BIOLOGICAL SCIENCES↗

Tailoring Cementitious Materials Towards Value-Added Use of Large CO2 Volumes

The main thrust of the project is to develop scalable, economical and convenient methods of delivering carbon dioxide to concrete, and to tailor the chemistry of concrete to make beneficial use of large carbon dioxide volumes towards achieving enhanced performance, economic, sustainability and energy-efficiency attributes. Concrete materials incorporating two different inorganic binders based on calcium silicate hydrate (Portland cement) and alkali aluminosilicate hydrate (geopolymer) were considered in the project. The novel method of carbon dioxide delivery developed in the project involves mechanosorption into cementitious materials during their size reduction. The mechanosorbed carbon dioxide becomes available during production of concrete to induce carbonation reactions which enhance concrete properties and also sequester carbon dioxide. Experimental evidence was produced for mechanosorption (mechanochemical binding) of carbon dioxide into iron slag and Portland cement, the amorphous and reactive nature of the carbonates formed via mechanosorption, and their contributions towards enhancement of concrete material properties by inducing carbonation reactions. It was shown that mechanosorption of carbon dioxide can be accomplished by simple modification of the existing milling step in production of cementitious materials. An alternative carbon dioxide delivery method was also considered where curing of concrete products was performed in carbon dioxide. A host of additives were considered to enhance the sorption of carbon dioxide, dissolution of cementitious minerals in aqueous media, carbonation reactions, and co-precipitation of hydrates and carbonates for concrete production. Experimental investigations were conducted to identify the additives which offer the greatest promise for enhancing the carbon dioxide sequestration and the beneficial effects of carbonation reactions on concrete materials with different binder chemistries. The results confirmed that tailoring the chemistry of inorganic binders to suit carbon dioxide mechanosorption and carbonation reactions yields significant benefits. Optimization experimental investigations were undertaken with selected additives to further enhance the economics, environmental and performance benefits of the process. The optimum concrete materials incorporating chemically bound carbon dioxide were thoroughly characterized. The test results demonstrated the potential to raise the carbon dioxide sequestration of concrete, and to pronounce the consequent gains in the mechanical, barrier and durability characteristics of concrete. Analytical chemistry and theoretical methods were employed to provide insight into the mechanochemical binding of carbon dioxide, the mechanisms through which carbonation reactions enhance concrete properties, and the impacts of additives on the process. Initial and life-cycle environmental, economic and energy analyses were undertaken. The outcomes of these analyses demonstrated the value of the approach in sequestering significant quantities of carbon dioxide can to induce carbonation reactions which improve diverse material properties of concrete, and significantly lower the energy content and cost of concrete production. The project outcomes offer commercially viable means of transforming concrete, the most widely used material of construction, from a major source of carbon dioxide emission and energy consumption into a valuable resource for large-volume carbon dioxide sequestration. The technology promises to significantly enhance the structural efficiency, service life, sustainability, economics and energy-efficiency of the concrete-based infrastructure

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Combined Effort to De-Inventory the New Brunswick Laboratory of Plutonium Certified Reference Materials - 20504

To de-inventory plutonium Certified Reference Materials standards (CRMs) from the New Brunswick National Laboratory (NBL), the Argonne National Laboratory (ANL) and Savannah River National Laboratory (SRNL) formed a unique team. This teaming arrangement leveraged the different capabilities and expertise of both laboratories, helping to ensure the effort would be performed both safely and cost-effectively. With the NBL then physically housed on the ANL site, ANL served as the host-site, providing the necessary facilities and support services (e.g., supplying everything from hoods, loading equipment, and scales to Health Physics supports). From a packaging perspective, ANL's responsibilities focused mainly on characterizing and preparing the contents for shipment, followed by performing the Shipper of Record activities. With SRNL being the Package Design Authority of the 9978, the Type B packaging used for this effort, SRNL's scope included developing a Safety Analysis Report in Packaging (SARP) Letter Amendment to add the CRMs as authorized contents to the 9978. Recognizing competency, ANL prodigiously tasked SRNL to perform the actual loading of the CRMs into the 9978s, while physically on the ANL site. This paper details five different aspects of this effort. They are: 1. Characterization/validation of the CRM contents. 2. Development of the 9978 SARP Letter Amendment for the content change. 3. Development of the nitrogen inerting method to address SARP identified potential flammability concerns. 4. Renewal of the SRNL 9978 loading procedure. 5. Performance of the actual work execution activities. In 2017, the first nine packages were successfully loaded and shipped from NBL, while in 2019, the last ten were successfully loaded and planned for shipment. Without ANL leveraging SRNL's strengths, the de-inventorying of NBL of its plutonium CRMs would have likely taken many years longer. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Investigation of SiO{sub 2}:Na{sub 2}O ratio as a corrosion inhibitor for metal alloys

The silicate is one of the potential compounds used as a corrosion inhibitor for metal alloys. The mixture between silica and sodium hydroxide (NaOH) succeeded to produce the silicate product. The formulation of a silicate product normally variable depended by the different ratio of SiO{sub 2}:Na{sub 2}O. This research utilized the agriculture waste product of paddy using its rice husk. In this study, the amorphous silica content in rice husk ash was used after rice husk burnt in a muffle furnace at a certain temperature. The X-ray diffraction (XRD) analysis was done to determine the existence of amorphous phase of silica in the rice husk ash. There are several studies that recognized rice husk as an alternative source that obtained high silica content. The X-ray fluorescence (XRF) analysis was carried out to clarify the percentage amount of Si and O elements, which referred the silica compound in rice husk ash. The preparation of sodium silicate formulation were differ based on the SiO{sub 2}:Na{sub 2}O ratio (SiO{sub 2}:Na{sub 2}O ratio = 1.00, 2.00 and 3.00). These silicate based corrosion inhibitors were tested on several testing samples, which were copper (99.9%), aluminum alloy (AA 6061) and carbon steel (SAE 1045). The purpose of this study is to determine the appropriate SiO{sub 2}:Na{sub 2}O ratio and understand how this SiO{sub 2}:Na{sub 2}O ratio can affect the corrosion rate of each metal alloys immersed in acidic medium. In order to investigate this study, weight loss test was conducted in 0.5 M hydrochloric acid (HCl) for 24 hours at room temperature.

36 MATERIALS SCIENCE↗

Contactless monitoring of Ge content and B concentration in ultrathin single and double layer Si{sub 1-x}Ge{sub x} epitaxial films using multiwavelength micro-Raman spectroscopy

Non-contact monitoring of Ge content and B concentration in single and double Si{sub 1-x}Ge{sub x} epitaxial layers on Si(100) device wafers was attempted using high-resolution, multiwavelength micro-Raman spectroscopy. The Ge content and B concentration determined by secondary ion mass spectroscopy (SIMS) depth profiling showed very strong correlation with the position and full-width-at-half-maximum of the Si-Si peak from the Si{sub 1-x}Ge{sub x} epitaxial layers as determined by Raman measurements. High resolution X-ray diffraction (HRXRD) characterization was done for all wafers to determine Ge and B sensitivity and form comparisons with Raman and SIMS analysis. The non-destructive, in-line monitoring of Ge content and B concentration of single and double Si{sub 1-x}Ge{sub x} epitaxial layers with thickness ranging from 5 {approx} 120 nm, on small area monitoring pads, was successfully demonstrated by multiwavelength micro-Raman spectroscopy during epitaxial process optimization, material property verification, and quality control applications.

36 MATERIALS SCIENCE↗