Search NASA⌕ Search

SEARCH · Search NASA

Results for “control methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

On the application of deterministic optimization methods to stochastic control problems

A technique is presented by which deterministic optimization techniques, for example, the maximum principle of Pontriagin, can be applied to stochastic optimal control problems formulated around linear systems with Gaussian noises and general cost criteria. Using this technique, the stochastic nature of the problem is suppressed but for two expectation operations, the optimization being deterministic. The use of the technique in treating problems with quadratic and nonquadratic costs is illustrated.

Kramer, L. C.↗
NASA NTRS1977

A study of simplified methods for longitudinal control decoupling

Using an inflight simulator, a simple longitudinal decoupling concept was compared with conventional airplane characteristics for the approach and landing tasks. The decoupling system allowed the pilot to command flight path angle changes with the stick with little or no accompanying speed change; likewise, speed changes with only small accompanying flight path changes could be made with throttle only. The unique feature of the concept is that it is an open loop (that is, nonfeedback) control system. Results indicate that in calm air and up to moderate levels of turbulence the decoupling system provides a substantial reduction in pilot workload.

Joslin, R.↗
NASA NTRS1979

An assessment of methods for the control of large space structures

Large flexible spacecraft represent highly complex distributed-parameter systems. In theory, a distributed-parameter system possesses an infinite number of degrees of freedom. For practical reasons, however, it must be discretized, which implies truncation. From a structural dynamics point of view, a mathematical model can be made more accurate by retaining an increasing number of degrees of freedom. From a control theory point of view, however, an increasing number of degrees of freedom places severe demands on the reliability of the various control algorithms. There is a difference of at least one order of magnitude between the structural modeling requirements and control theory capability. One of the challenges of large space structures control technology is to bridge this difference.

Meirovitch, L.↗
NASA NTRS1983

Finite difference numerical methods for boundary control problems governed by hyperbolic partial differential equations

This paper briefly reviews convergent finite difference schemes for hyperbolic initial boundary value problems and their applications to boundary control systems of hyperbolic type which arise in the modelling of vibrations. These difference schemes are combined with the primal and the dual approaches to compute the optimal control in the unconstrained case, as well as the case when the control is subject to inequality constraints. Some of the preliminary numerical results are also presented.

Chen, G.↗
NASA NTRS1982

Dynamic stabilization methods for bilateral control of remote manipulation

This paper discusses and analyses several control strategies for generalized, bilateral master/slave manipulator systems. In these manipulators the two arms have different dynamic/kinematic properties which implies a more difficult control problem. Attention is focused on torque/force driven arms. Required performance for the necessary control computer(s) is discussed.

Handlykken, M.↗
NASA NTRS1984

Analysis of hourglass instabilities and control in underintegrated finite element methods

Belytschko et al. (1981, 1984) has developed stabilization methods for the treatment of underintegrated FEM problems; these methods involve the computation of an underintegrated stiffness matrix, which is rank-deficient, and the addition of a stabilization matrix which effectively eliminates the spurious modes. An attempt is presently made to give this a priori stabilization method a mathematical means of support. Attention is also given to an a posteriority stabilization method for hourglass control, in which an approximate solution of the underintegrated system is obtained and then subjected to a special projection in order to eliminate the hourglass modes. A proof is obtained for the convergence of this stabilized underintegrated approximation to the exact solution of a model problem at almost the same rate (as the mesh is refined) as the fully integrated solutions.

Jacquotte, O.-P.↗
NASA NTRS1986

Computational methods for the control of distributed parameter systems

Finite dimensional approximation schemes that work well for distributed parameter systems are often not suitable for the analysis and implementation of feedback control systems. The relationship between approximation schemes for distributed parameter systems and their application to optimal control problems is discussed. A numerical example is given.

Burns, J. A.↗
NASA NTRS1985

Computational methods for the control of distributed parameter systems

It is shown that care must be taken to ensure that finite dimensional approximations of distributed parameter systems preserve important system properties (i.e., controllability, observability, stabilizability, detectability, etc.). It is noted that, if the particular scheme used to construct the finite dimensional model does not take into account these system properties, the model may not be suitable for control design and analysis. These ideas are illustrated by a simple example, i.e., a cable-spring-mass system.

Burns, J. A.↗
NASA NTRS1990

Partitioning methods for global controllers

A procedure for partitioning a global (centralized) controller into interconnected decentralized subcontrollers is presented. It is shown that the controller partitioning problem is different than controller order reduction. An example is presented to demonstrate a procedure wherein an integrated flight/propulsion controller is partitioned into separate airframe and engine subcontrollers. Results show that the assembled partitioned subcontrollers closely match the response of the centralized controller in the frequency domain.

Schmidt, Phillip↗
NASA NTRS1993

A compact roller-gear pitch-yaw joint module: Design and control issues

Robotic systems have been proposed as a means of accomplishing assembly and maintenance tasks in space. The desirable characteristics of these systems include compact size, low mass, high load capacity, and programmable compliance to improve assembly performance. In addition, the mechanical system must transmit power in such a way as to allow high performance control of the system. Efficiency, linearity, low backlash, low torque ripple, and low friction are all desirable characteristics. This work presents a pitch-yaw joint module designed and built to address these issues. Its effectiveness as a two degree-of-freedom manipulator using natural admittance control, a method of force control, is demonstrated.

Dohring, Mark E.↗
NASA NTRS1994

Displaceable spur gear torque controlled driver and method

Methods and apparatus are provided for a torque driver including a laterally displaceable gear support member to carry an output spur gear. A biasing assembly biases the output spur gear into engagement with a pinion to which is applied an input torque greater than a desired output torque limit for a threaded fastener such as a nut or screw. A coiled output linkage connects the output spur gear with a fastener adaptor which may be a socket for a nut. A gear tooth profile provides a separation force that overcomes the bias to limit torque at the desired torque limit. Multiple fasteners may be rotated simultaneously to a desired torque limit if additional output spur gears are provided. A gauged selector mechanism is provided to laterally displace multiple driver members for fasteners arranged in differing configurations. The torque limit is selectably adjustable and may be different for fasteners within the same fastener configuration.

Cook, Joseph S., Jr.↗
NASA NTRS1996

Displaceable Spur Gear Torque Controlled Driver and Method

Methods and apparatus are provided for a torque driver including a laterally displaceable gear support member to carry an output spur gear. A biasing assembly biases the output spur gear into engagement with a pinion to which is applied an input torque greater than a desired output torque limit for a threaded fastener such as a nut or screw. A coiled output linkage connects the output spur gear with a fastener adaptor which may be a socket for a nut. A gear tooth profile provides a separation force that overcomes the bias to limit torque at the desired torque limit. Multiple fasteners may be rotated simultaneously to a desired torque limit if additional output spur gears are provided. A gauged selector mechanism is provided to laterally displace multiple driven members for fasteners arranged in differing configurations. The torque limit is selectably adjustable and may be different for fasteners within the same fastener configuration.

Cook, Joseph S., Jr.↗
NASA NTRS1960

Experience with a three-axis side-located controller during a static and centrifuge simulation of the piloted launch of a manned multistage vehicle

An investigation was conducted to determine a human pilot's ability to control a multistage vehicle through the launch trajectory. The simulation was performed statically and dynamically by utilizing a human centrifuge. An interesting byproduct of the program was the three-axis side-located controller incorporated for pilot control inputs. This method of control proved to be acceptable for the successful completion of the tracking task during the simulation. There was no apparent effect of acceleration on the mechanical operation of the controller, but the pilot's control feel deteriorated as his dexterity decreased at high levels of acceleration. The application of control in a specific control mode was not difficult. However, coordination of more than one mode was difficult, and, in many instances, resulted in inadvertent control inputs. The acceptable control harmony at an acceleration level of 1 g became unacceptable at higher acceleration levels. Proper control-force harmony for a particular control task appears to be more critical for a three-axis controller than for conventional controllers. During simulations in which the pilot wore a pressure suit, the nature of the suit gloves further aggravated this condition.

Andrews, William H.↗