Search NASA⌕ Search

SEARCH · Search NASA

Results for “controller stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Preference of multi-walled carbon nanotube (MWCNT) to single-walled carbon nanotube (SWCNT) and activated carbon for preparing silica nanohybrid pickering emulsion for chemical enhanced oil recovery (C-EOR)

The aim of this research was to determine the best nano hybrid that can be used as a Pickering emulsion Chemical Enhanced Oil Recovery (C-EOR). Therefore, we have prepared different carbon structures nano hybrids with SiO{sub 2} nano particles with different weight percent using sol-gel method. The as-prepared nano materials were characterized with X-Ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM) and Thermal Gravimetric Analysis (TGA). Pickering emulsions of these nanohybrids were prepared at pH=7 in ambient temperature and with distilled water. Stability of the mentioned Pickering emulsions was controlled for one month. Emulsion phase morphology was investigated using optical microscopic imaging. Evaluation results demonstrated that the best sample is the 70% MWCNT/SiO{sub 2} nanohybrid. Stability of the selected nanohybrid (70% MWCNT/SiO{sub 2} nanohybrid) was investigated by alteration of salinity, pH and temperature. Results showed that the mentioned Pickering emulsion has very good stability at 0.1%, 1% salinity, moderate and high temperature (25 °C and 90 °C) and neutral and alkaline pH (7, 10) that is suitable for the oil reservoirs conditions. The effect of the related nano fluid on the wettability of carbonate rock was investigated by measuring the contact angle and interfacial tension. Results show that the nanofluid could significantly change the wettability of the carbonate rock from oil wet to water wet and can decrease the interfacial tension. Therefore, the 70% MWCNT/SiO{sub 2} nanohybrid Pickering emulsion can be used for Chemical Enhanced Oil Recovery (C-EOR).

36 MATERIALS SCIENCE↗

Kinetic Isotope Effect in the Radical Step-Growth Termination of On-Surface Synthesized Graphene Nanoribbons

Bottom-up on-surface synthesis has emerged as a versatile tool to access and finely tune the electronic structure of nanographenes. The controlled generation of reactive intermediates catalyzed and stabilized by a supporting substrate has enabled the design, assembly, and characterization of a wide range of exotic tailor-made quantum materials. Even under these tightly controlled conditions, the growth of extended structures remains limited by termination processes and undesired side reactions. Here, we identify an H atom transfer as one principal contributor to the radical step growth termination that limits the on-surface growth of N = 7 armchair graphene nanoribbons (7-AGNRs) on Au(111) surfaces. Analysis of 7-AGNR lengths grown from protiated and deuterated molecular precursors reveals a primary kinetic isotope effect of KIE ∼ 1.4. First-principles density functional theory calculations suggest that a concerted H atom transfer mechanism that involves the breaking of a C–H/D bond in the transition state is associated with radical chain termination.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Robust decentralized frequency control: A leaky integrator approach

We investigate the robustness of the so-called leaky integral frequency controller for the power network. In particular, using a strict Lyapunov function, we show the closed-loop system is robust in the input-to-state stability sense to measurement noise in the controller. Moreover, an interesting and explicit trade-off between controller performance and robustness is discussed and illustrated using a benchmark study of the 39-bus New England reference network.

Weitenberg, Erik↗

Tunable optical properties and stability of lead free all inorganic perovskites (Cs 2 SnI x Cl 6-x )

Organic–inorganic hybrid lead-based perovskites experience significant environmental instability under ambient moist air and are not environmentally benign due to the usage of toxic Pb. In this paper, we report a new approach to synthesize lead-free all inorganic perovskites (Cs 2 SnI x Cl 6-x ) using hydriodic acid (HI) demonstrating greatly enhanced environmental stability and tunable optical properties by controlling the I - /Cl - ratios. Single phase perovskites can be achieved with a low iodine or chlorine content, and a phase separation occurs in the binary system with closer iodine and chlorine dopings. UV-vis diffuse reflectance and photoluminescence measurements reveal tunable band gaps of Cs 2 SnI x Cl 6-x perovskites from the UV to the infrared region. The mixed halide perovskite with a lower chloride content shows significantly higher photoluminescence intensity. The thermal stability of mixed halide all-inorganic perovskites is continuously improved as the Cl content increases. Finally, the synthesis of Sn-based perovskites with tunable optical properties and environmental stability represents one step further toward the realization of the stable lead-free all inorganic perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of robust and multi-mode control of tearing in DIII-D

Neoclassical tearing modes (NTMs) are instabilities that can produce undesirable magnetic islands in tokamak plasmas. They can be stabilized by applying electron cyclotron current drive (ECCD) at the island. The NTM control system on DIII-D can now control multiple modes. Each of 6 mirrors that reflect ECCD beams into the plasma can be assigned to different surfaces in the plasma where NTMs are unstable. The control system then steers the mirrors to keep the beams aimed at the surfaces. The system routinely stabilizes one NTM preemptively and has now also been used to control two modes in the same discharge. With the “catch-and-subdue” function, ECCD-generating gyrotrons can be turned on when NTMs appear and off after suppression. Newly triggered NTMs can be promptly suppressed if mode onset is detected early and ECCD immediately applied. Early mode detection is achieved in this paper by spectral analysis of Mirnov probes with a band-pass filter for the expected mode frequency. Targeted surfaces are tracked by equilibrium reconstructions (that include measurements of the motional Stark effect). The ECCD position is tracked by ray-tracing using the TORBEAM code. Several techniques are being explored for fine-tuning alignment when NTMs occur. One method adjusts ECCD alignment in steps until the island decays fast enough. A second method sweeps the alignment to find the optimum. A third method pulses gyrotrons and uses electron cyclotron emission to compare where the resulting temperature pulses are relative to temperature fluctuations from a rotating NTM. NTM control in ITER is expected to use active profile regulation to maximize controllability, followed by repeated catch-and-subdue actions if modes are retriggered, in order to maintain island size below the disruptive threshold while maximizing confinement and fusion gain. Between events, real-time tracking will be performed to maintain alignment and readiness for subsequent catch-andsubdue actions. Methods for active probing of stability boundaries will be studied as possible diagnostics for the profile regulation. Finally, selected elements of this ITER NTM control vision will be discussed and assessed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High‐Nickel Heterostructured Cathodes with Local Stoichiometry Control for High‐Voltage Operation

The growing demand for lithium‐ion batteries to power electric vehicles and other energy‐dense devices continues to fuel the need for cathodes of increasingly higher nickel in cathodes. The relentless pursuit of high Ni content, however, raises concerns on compromising cell lifetime and safety, especially under high‐voltage operation. Alternative to the traditional design of uniform or core–shell composition, we report a rational control of local stoichiometry in high‐Ni cathodes, enabling their high thermal and cycling stabilities—up to 258 °C at the fully charged state and 91.4% capacity retention for 100 cycles between 2.7 and 4.4 V. Multimodal synchrotron X‐ray characterization unveils the heterostructure of secondary particles, featuring a high‐Ni core (LiNi 0.90 Mn 0.05 Co 0.05 O 2 ) covered by a thin Ni‐gradient layer that remains stable over prolonged cycling due to suppressed oxygen release and structural deterioration. This work underlines, the intricate interplay between local stoichiometry and redox reactions in stabilizing high‐Ni cathodes for high‐voltage operation while ensuring safety.

36 MATERIALS SCIENCE↗

The Future of Arms Control in a Multilateral and Multi-Domain Environment

The crisis of arms control is obvious and broadly discussed among states, within the world’s expert community and to a lesser extent the media. This crisis has at least three building blocks: Russia continues to violate or undermine key arms control treaties and commitments; China rejects to join the existing arms control architecture; and both countries heavily invest in the modernization of their armed forces, including development of the nuclear arsenals. In the current highly competitive environment, arms control is more difficult to achieve and is likely to accomplish less than what was optimistically anticipated a generation ago. The growing pressure to “save arms control at all cost”, often expressed by the Western expert community, further complicates the situation. The excessively aspirational and ideological approach to arms control – in which arms control, disarmament, and non-proliferation (ADN) become a silver bullet solution – is as dangerous as security and defence policies which entirely exclude ADN. As James Cameron rightly points out, “history should teach policy-makers to look beyond formulae for strategic stability to other ways in which arms control can help to contain disruptive challenges to the balance of power and minimize the chances of war”.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

CERTS Microgrid Laboratory Test Bed

The objective of the CERTS Microgrid Test Bed project was to enhance the ease of integrating energy sources into a microgrid. The project accomplished this objective by developing and demonstrating three advanced techniques, collectively referred to as the CERTS Microgrid concept, that significantly reduce the level of custom field engineering needed to operate microgrids consisting of generating sources less than 100kW. The techniques comprising the CERTS Microgrid concept are: 1) a method for effecting automatic and seamless transitions between grid-connected and islanded modes of operation, islanding the microgrid's load from a disturbance, thereby maintaining a higher level of service, without impacting the integrity of the utility's electrical power grid; 2) an approach to electrical protection within a limited source microgrid that does not depend on high fault currents; and 3) a method for microgrid control that achieves voltage and frequency stability under islanded conditions without requiring high-speed communications between sources. These techniques were demonstrated at a full-scale test bed built near Columbus, Ohio and operated by American Electric Power. The testing fully confirmed earlier research that had been conducted initially through analytical simulations, then through laboratory emulations,and finally through factory acceptance testing of individual microgrid components. The islanding and resychronization method met all Institute of Electrical and Electronics Engineers Standard 1547 and power quality requirements. The electrical protection system was able to distinguish between normal and faulted operation. The controls were found to be robust under all conditions, including difficult motor starts and high impedance faults. The results from these tests are expected to lead to additional testing of enhancements to the basic techniques at the test bed to improve the business case for microgrid technologies, as well to field demonstrations involving microgrids that involve one or more of the CERTS Microgrid concepts. Future planned microgrid work involves unattended continuous operation of the microgrid for 30 to 60 days to determine how utility faults impact the operation of the microgrid and to gage the power quality and reliability improvements offered by microgrids.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Core plasma physics basis and its impacts on the FNSF

The FNSF core plasma physics is reportede on with detailed analysis to establish the basis for the reference configuration, R = 4.8 m, a = 1.2 m, Ip = 7.87 MA, and B T = 7.5 T, q 95 = 6, f BS = 0.52, β N < 2.7 established in Ref. [1]. Central solenoid (CS) and poloidal field (PF) coils are far from the plasma as in a power plant, and acceptable coil currents are determined for the rampup and flattop fiducial states. Time-dependent free-boundary plasma evolution simulations demonstrate that the FNSF plasma can be established, ramped up, and relaxed into flattop, including vertical stabilizers, internal feedback coils and feedback control on plasma current, position, and shape. A range of density (n o / = 1.3–1.5) and temperature (T o / = 2.2–2.7) profiles are examined, indicating that energy confinement of H 98 = 1.1–1.2 is required to provide 100% non-inductive plasma current in the FNSF. GLF23 theory based transport model predicted lower energy confinement of H 98 ~0.6–0.85. The EPED analysis shows that the pedestal temperature ranges from 4.0–4.7 keV for pedestal densities of 1.7–1.0 × 10 20 /m 3 . The n = 1 kink stability shows no-wall beta limits, using the pressure and current profiles associated with the transport and current drive sources, ranging from β N ~2.25–2.55 depending on l i . A conducting wall can extend these limits by 10–40% depending on li and wall location. At the lower beta’s of the reference plasma, a combination of 50 MW of NB, 30 MW of LH, 20 MW of ICRF, 20 MW of EC, and bootstrap current, are found to provide 100% of the plasma current with a stable current profile. Impacts on the FNSF of plasma physics are discussed and R&D challenges are recorded.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Uncertainties in climate stabilization

We explore the atmospheric composition, temperature and sea level implications of new reference and cost-optimized stabilization emissions scenarios produced using three different Integrated Assessment (IA) models for U.S. Climate Change Science Program (CCSP) Synthesis and Assessment Product 2.1a. We also consider an extension of one of these sets of scenarios out to 2300. Stabilization is defined in terms of radiative forcing targets for the sum of gases potentially controlled under the Kyoto Protocol. For the most stringent stabilization case (“Level 1” with CO2 concentration stabilizing at about 450 ppm), peak CO2 emissions occur close to today, implying a need for immediate CO2 emissions abatement if we wish to stabilize at this level. In the extended reference case, CO2 stabilizes at 1000 ppm in 2200 – but even to achieve this target requires large and rapid CO2 emissions reductions over the 22nd century. Future temperature changes for the Level 1 stabilization case show considerable uncertainty even when a common set of climate model parameters is used (a result of different assumptions for non-Kyoto gases). Uncertainties are about a factor of three when climate sensitivity uncertainties are accounted for. We estimate the probability that warming from pre-industrial times will be less than 2oC to be about 50%. For one of the IA models, warming in the Level 1 case is greater out to 2050 than in the reference case, due to the effect of decreasing SO2 emissions that occur as a side effect of the policy-driven reduction in CO2 emissions. Sea level rise uncertainties for the Level 1 case are very large, with increases ranging from 12 to 100 cm over 2000 to 2300.

54 ENVIRONMENTAL SCIENCES↗

Erosional redistribution of topsoil controls soil nitrogen dynamics

In recent years, the role of soil erosion on terrestrial carbon sequestration had been the focus of a growing number of studies. However, relatively little attention has been paid so far to the role of erosion on the lateral distribution of soil nitrogen (N) and the role of geomorphic processes on soil N dynamics. We present primary data on the stock of nitrogen in soil and its rate of erosion at a relatively undisturbed, zero-order watershed in northern California. Erosion transports 0.26–0.47 g N m -2 year -1 from eroding slope positions (Summit and Slope), and about two-thirds of the eroded N enters depositional landform positions (Hollow and Plain). Our results show that depositional-position soil profiles contain up to 3 times more N than soil profiles in the eroding positions. More than 92% of all soil nitrogen was chemically bound to soil minerals in all the landform positions, compared to 2–4% each found in the free light and occluded light fractions. Nitrogen associated with the free light fraction in topsoil is particularly susceptible to loss by soil erosion. By comparison, soil N associated with the aggregate-protected occluded light fractions and the mineral-associated dense fractions is likely to be protected from gaseous and dissolved losses. On average, we found that soil N has mean residence time of 694 years in eroding landform positions, compared to 2951 years in depositional landform positions. Our results also show that microbial processing of organic matter exerts strong control on overall soil N storage and N stabilized through sorptive interactions with soil minerals only in poorly drained depositional landform positions. Finally, soil erosion exerts important control on stock, distribution, and long-term fate of soil N in dynamic landscapes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High temperature shockwave stabilized single atoms

The stability of single-atom catalysts is critical for their practical applications. Although a high temperature can promote the bond formation between metal atoms and the substrate with an enhanced stability, it often causes atom agglomeration and is incompatible with many temperature-sensitive substrates. Here, we report using controllable high-temperature shockwaves to synthesize and stabilize single atoms at very high temperatures (1,500-2,000 K), achieved by a periodic on-off heating that features a short on state (55 ms) and a ten-times longer off state. The high temperature provides the activation energy for atom dispersion by forming thermodynamically favourable metal-defect bonds and the off-state critically ensures the overall stability, especially for the substrate. The resultant high-temperature single atoms exhibit a superior thermal stability as durable catalysts. In conclusion, the reported shockwave method is facile, ultrafast and universal (for example, Pt, Ru and Co single atoms, and carbon, C 3 N 4 and TiO 2 substrates), which opens a general route for single-atom manufacturing that is conventionally challenging.

42 ENGINEERING↗

Analytical solution of thermal magnetization on memory stabilizer structures

We return to the question of how the choice of stabilizer generators affects the preservation of information on structures whose degenerate ground state encodes a classical redundancy code. Controlled-not gates are used to transform the stabilizer Hamiltonian into a Hamiltonian consisting of uncoupled single spins and/or pairs of spins. This transformation allows us to obtain an analytical partition function and derive closed-form equations for the relative magnetization and susceptibility. These equations are in agreement with the numerical results presented in Viteri et al. [Phys. Rev. A 80, 042313 (2009)] for finite size systems. Analytical solutions show that there is no finite critical temperature, T{sub c}=0, for all of the memory structures in the thermodynamic limit. This is in contrast to the previously predicted finite critical temperatures based on extrapolation. The mismatch is a result of the infinite system being a poor approximation even for astronomically large finite-size systems, where spontaneous magnetization still arises below an apparent finite critical temperature. We extend our analysis to the canonical stabilizer Hamiltonian. Interestingly, Hamiltonians with two-body interactions have a higher apparent critical temperature than the many-body Hamiltonian.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural water in amorphous carbonate minerals: ab initio molecular dynamics simulations of X-ray pair distribution experiments

Water is known to play a controlling role in directing mineralization pathways and stabilizing metastable amorphous intermediates in hydrous carbonate mineral MCO 3 ·nH 2 O systems, where M 2+ is a divalent metal cation. Despite this recognition, the nature of the controls on crystallization is poorly understood, largely owing to the difficulty in characterizing the dynamically disordered structures of amorphous intermediates at the atomic scale. Here, we present a series of atomistic models, derived from ab initio molecular dynamics simulation, across a range of experimentally relevant cations (M = Ca, Mg, Sr) and hydration levels (0 ≤ n ≤ 2). Theoretical simulations of the dependence of the X-ray pair distribution function on the hydration level n show good agreement with available experimental data and thus provide further evidence for a lack of significant nanoscale structure in amorphous carbonates. Upon dehydration, the metal coordination number does not change significantly, but the relative extent of water dissociation increases, indicating that a thermodynamic driving force exists for water dissociation to accompany dehydration. Mg strongly favors monodentate conformation of carbonate ligands and shows a marked preference to exchange monodentate carbonate O for water O upon hydration, whereas Ca and Sr exchange mono- and bidentate carbonate ligands with comparable frequency. Finally, water forms an extensive hydrogen bond network among both water and carbonate groups that exhibits frequent proton transfers for all three cations considered suggesting that proton mobility is likely predominantly due to water dissociation and proton transfer reactions rather than molecular water diffusion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A gimbal platform stabilization for topographic applications

The aim of this work is the stabilization of a Gimbal platform for optical sensors acquisitions in topographic applications using mobile vehicles. The stabilization of the line of sight (LOS) consists in tracking the command velocity in presence of nonlinear noise due to the external environment. The hardware architecture is characterized by an Ardupilot platform that allows the control of both the mobile device and the Gimbal. Here we developed a new approach to stabilize the Gimbal platform, which is based on neural network. For the control system, we considered a plant that represents the transfer function of the servo system control model for an inertial stabilized Gimbal platform. The transductor used in the feed-back line control is characterized by the Rate Gyro transfer function installed onboard of Ardupilot. For the simulation and investigation of the system performance, we used the Simulink tool of Matlab. Results show that the hardware/software approach is efficient, reliable and cheap for direct photogrammetry, as well as for general purpose applications using mobile vehicles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Vinyl monomers-induced synthesis of polyvinyl alcohol-stabilized selenium nanoparticles

A simple wet chemical method has been developed to synthesize selenium nanoparticles (size 100-200 nm), by reaction of sodium selenosulphate precursor with different vinyl monomers, such as acrylamide, N,N'-dimethylene bis acrylamide, methyl methacrylate, sodium acrylate, etc., in aqueous medium, under ambient conditions. Polyvinyl alcohol has been used to stabilize the selenium nanoparticles. Average size of the synthesized selenium nanoparticles can be controlled by adjusting concentration of both the precursors and the stabilizer. Rate of the reaction as well as size of the resultant selenium nanoparticles have been correlated with the functional groups of the different monomers. UV-vis optical absorption spectroscopy, X-ray diffraction, energy dispersive X-rays, differential scanning calorimetry, atomic force microscopy, scanning electron microscopy and transmission electron microscopy techniques have been employed to characterize the synthesized selenium nanoparticles. Gas chromatographic analysis of the reaction mixture established the non-catalytic role of the vinyl monomers, which were found to be consumed during the course of the reaction.

36 MATERIALS SCIENCE↗

Robust H{sub ∞} control for singular time-delay systems with saturating actuators via static output feedback

The problem of H{sub ∞} robust exponential stability and static output feedback stabilization of uncertain singular time-delay systems with saturating actuators are investigated. First, the delay-dependent condition is given to guarantee that the singular time-delay systems are not only exponential admissible, but also satisfies H{sub ∞} performance γ. Moreover, the estimation of stability region and the design method of H{sub ∞} static output feedback controller are given by solving a convex optimization problem. Some simulation examples are provided to demonstrate the merit of the proposed design methods.

97 MATHEMATICS AND COMPUTING↗

Making the Grid "Smart" Through "Smart" Microgrids: Real-Time Power Management of Microgrids with Multiple Distributed Generation Sources Using Intelligent Control

In this Project we collaborated with two DOE National Laboratories, Pacific Northwest National Lab (PNNL) and Lawrence Berkeley National Lab (LBL). Dr. Hammerstrom of PNNL initially supported our project and was on the graduate committee of one of the Ph.D. students (graduated in 2014) who was supported by this project. He is also a committee member of a current graduate student of the PI who was supported by this project in the last two years (August 2014-July 2016). The graduate student is now supported be the Electrical and Computer Engineering (ECE) Department at Montana State University (MSU). Dr. Chris Marney of LBL provided actual load data, and the software WEBOPT developed at LBL for microgrid (MG) design for our project. NEC-Labs America, a private industry, also supported our project, providing expert support and modest financial support. We also used the software “HOMER,” originally developed at the National Renewable Energy Laboratory (NREL) and the most recent version made available to us by HOMER Energy, Inc., for MG (hybrid energy system) unit sizing. We compared the findings from WebOpt and HOMER and designed appropriately sized hybrid systems for our case studies. The objective of the project was to investigate real-time power management strategies for MGs using intelligent control, considering maximum feasible energy sustainability, reliability and efficiency while, minimizing cost and undesired environmental impact (emissions). Through analytic and simulation studies, we evaluated the suitability of several heuristic and artificial-intelligence (AI)-based optimization techniques that had potential for real-time MG power management, including genetic algorithms (GA), ant colony optimization (ACO), particle swarm optimization (PSO), and multi-agent systems (MAS), which is based on the negotiation of smart software-based agents. We found that PSO and MAS, in particular, distributed MAS, were more efficient and better suited for our work. We investigated the following: • Intelligent load control - demand response (DR) - for frequency stabilization in islanded MGs (partially supported by PNNL). • The impact of high penetration of solar photovoltaic (PV)-generated power at the distribution level (partially supported by PNNL). • The application of AI approaches to renewable (wind, PV) power forecasting (proposed by the reviewers of our proposal). • Application of AI approaches and DR for real-time MG power management (partially supported by NEC Labs-America) • Application of DR in dealing with the variability of wind power • Real-time MG power management using DR and storage (partially supported by NEC Labs-America) • Application of DR in enhancing the performance of load-frequency controller • MAS-based whole-sale and retail power market design for smart grid A

24 POWER TRANSMISSION AND DISTRIBUTION↗