Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronic structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Phase and structural states in the NiTi-based alloy surface layer formed by electron-ion-plasma methods using tantalum

The paper reports on a study of regularities of formation gradient nano-, submicron and microstructural conditions in the surface layers of the samples after pulsed electron-beam melting of tantalum coating on the substrate NiTi alloy. Experimentally revealed the presence of submicron columnar structure in the upper layers of the tantalum coating. After irradiation modified NiTi surface takes on a layered structure in which each layer differs in phase composition and structural phase state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Band gaps in InN/GaN superlattices: Nonpolar and polar growth directions

The electronic structures of nonpolar short-period InN/GaN superlattices (SLs) grown in the wurtzite a- and m-directions have been calculated and compared to previous calculations for polar superlattices (grown in the c-direction). The variation of the band gaps with the composition (m, n) of the mInN/nGaN unit cells of the superlattices was examined. The band structures were obtained by self-consistent calculations based on the local density approximation to the density functional theory using the Linear-Muffin-Tin-Orbital method with a semi-empirical correction for the band gaps. The calculated band gaps and their pressure coefficients for nonpolar superlattices are similar to those calculated for bulk InGaN alloys with an equivalent In/Ga concentration ratio. This is very different from what has been found in polar superlattices where the band gaps are much smaller and vanish when the number m of InN layers in the unit cell exceeds three. A strong internal electric field is responsible for this behavior of polar structures. Experimental photoluminescence data for polar SLs agree very well with gaps calculated for the nonpolar structures. It is suggested that this is caused by screening of the electric field in the polar structures by carriers originating from unintentional defects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation of the silicon concentration effect on Si-doped anatase TiO{sub 2} by first-principles calculation

A first-principles calculation based on the density functional theory (DFT) was used to investigate the energetic and electronic properties of Si-doped anatase TiO{sub 2} with various silicon concentrations. The theoretical calculations showed that with Si-doping the valence band and conduction band of TiO{sub 2} became hybrid ones with large dispersion, which could benefit the mobility of the photo-generated carriers. This result is in agreement with the experimental reports. At lower doping levels, the band gap of Si-doped anatase TiO{sub 2} decreases about 0.2 eV. With the increase of silicon concentration, the band gap increases gradually and larger formation energies are required during the synthesis of Si-doped TiO{sub 2}. - Graphical abstract: The total density of states (TDOS) of Ti{sub 1-x}Si{sub x}O{sub 2} with (a) x=0, (b) x=0.03125, (c) x=0.0625, (d) x=0.09375 and (e) x=0.125. Highlights: > The effect of Si content on the electronic structure in Si-doped anatase TiO{sub 2}. > Large dispersion of DOS in VB and CB benefits the mobility of the carriers. > Low Si-doping level reduces the band gap of Si-doped anatase TiO{sub 2} with 0.2 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular modification of coumarin dyes for more efficient dye sensitized solar cells

In this work, new coumarin based dyes for dye sensitized solar cells (DSSC) have been designed by introducing several substituent groups in different positions of the NKX-2311 structure. Two types of substitutions have been considered: the introduction of three electron-donating groups (-OH, -NH{sub 2}, and -OCH{sub 3}) and two different substituents with steric effect: -CH{sub 2}-CH{sub 2}-CH{sub 2}- and -CH{sub 2}-HC=CH-. The electronic absorption spectra (position and width of the first band and absorption threshold) and the position of the LUMO level related to the conduction band have been used as theoretical criteria to evaluate the efficiency of the new dyes. The introduction of a -NH{sub 2} group produces a redshift of the absorption maximum position and the absorption threshold, which could improve the cell efficiency. In contrast, the introduction of -CH{sub 2}-CH{sub 2}-CH{sub 2}- does not modify significantly the electronic structure of NKX-2311, but it might prevent aggregation. Finally, -CH{sub 2}-HC=CH- produces important changes both in the electronic spectrum and in the electronic structure of the dye, and it would be expected as an improvement of cell efficiency for these dyes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure of LaBr 3 from quasiparticle self-consistent G W calculations

Rare-earth-based scintillators in general and lanthanum bromide (LaBr3) in particular represent a challenging class of materials due to pronounced spin-orbit coupling and subtle interactions between d and f states that cannot be reproduced by standard density functional theory (DFT). Here a detailed investigation of the electronic band structure of LaBr3 using the quasiparticle self-consistent GW (QPscGW) method is presented. This parameter-free approach is shown to yield an excellent description of the electronic structure of LaBr 3 . Specifically, it is able to reproduce the band gap, the correct level ordering and spacing of the 4f and 5d states, as well as the spin-orbit splitting of La-derived states. The QPscGW results are subsequently used to benchmark several computationally less demanding techniques including DFT+U, hybrid exchange-correlation functionals, and the G 0 W 0 method. Spin-orbit coupling is included self-consistently at each QPscGW iteration and maximally localized Wannier functions are used to interpolate quasiparticle energies. The QPscGW results provide an excellent starting point for investigating the electronic structure of excited states, charge self-trapping, and activator ions in LaBr 3 and related materials.

36 MATERIALS SCIENCE↗

Localizing Holes as Polarons and Predicting Band Gaps, Defect Levels, and Delithiation Energies of Solid-State Materials with a Local Exchange-Correlation Functional

Here, we assess the performance of seven exchange–correlation functionals (some with and some without a Hubbard U correction) for their ability (i) to predict band gaps of silicon, diamond, and Li-ion battery cathode materials, (ii) to localize hole polarons and predict delithiation energies in Li-ion battery cathode materials, and (iii) to predict transition levels of charge carriers of doped silicon and diamond. Both local and hybrid exchange–correlation functionals were tested. The local functionals tend to underestimate band gaps and delocalize polarons. The hybrid functionals very often give a good description of both properties, but they may not be practical for calculations involving large unit cells, large ensembles, or dynamics, and therefore a local functional with a Hubbard U correction is often used (giving the method called DFT+U), where the value of a parameter U is adjusted according to the system and the property being investigated. Keeping in mind the importance of computational cost and the undesirability of having to adjust an empirical parameter for each system or property of interest, we recently developed a local functional, namely HLE17, to try to accurately predict band gaps and excitation energies, and we validated it using mostly main-group solids and molecules. Here we test the performance of HLE17 for its ability to predict band gaps and localize polarons in other solid-state materials, and we compare its performance to that of popular local functionals (PBE, PBEsol, and TPSS), a range-separated hybrid functional with screened exchange (HSE06), and DFT+U. We find that HLE17 predicts more accurate band gaps than other local functionals and can localize holes as polarons, which other local functionals usually fail to do, and for a number of cases it is comparable in performance quality to Hubbard-corrected functionals without the need for system-specific parametrization and to hybrid functionals without the high cost. Because HLE17 does not predict accurate lattice constants, we use the single-point method of quantum chemistry, where the geometry is optimized with one functional and the band gap is calculated with HLE17, or we perform calculations with the lattice constants obtained by TPSS and both the fractional intracell coordinates and the electronic structure obtained by HLE17 (a new method denoted HLE17\\TPSS). In particular, we performed calculations by HLE17//TPSS, HLE17//HSE06, HLE17//DFT+U, and HLE17\\TPSS, and these methods usually agree well with each other and give values similar to experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photonic crystal ring resonator based optical filters for photonic integrated circuits

In this paper, a two Dimensional (2D) Photonic Crystal Ring Resonator (PCRR) based optical Filters namely Add Drop Filter, Bandpass Filter, and Bandstop Filter are designed for Photonic Integrated Circuits (PICs). The normalized output response of the filters is obtained using 2D Finite Difference Time Domain (FDTD) method and the band diagram of periodic and non-periodic structure is attained by Plane Wave Expansion (PWE) method. The size of the device is minimized from a scale of few tens of millimeters to the order of micrometers. The overall size of the filters is around 11.4 μm × 11.4 μm which is highly suitable of photonic integrated circuits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The effect of electronegative difference on the electronic structure and visible light photocatalytic activity of N-doped anatase TiO{sub 2} by first-principles calculations

The effect of electronegative difference between nitrogen and oxygen on electronic properties of N-doped anatase TiO{sub 2} has been studied using first-principles calculations. The results indicate that the valence band maximum (VBM) shifts to high energy by 0.27 eV and the band gap states composed of N 2p, O 2p, and Ti 3d states are formed through the three states entering into the gap after N doping. The interactions of three states widen and delocalize the band gap states. The raised VBM and the wide band gap states can improve the visible light photocatalytic activity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical NOR logic gate design on square lattice photonic crystal platform

We numerically demonstrate a new configuration of all-optical NOR logic gate with square lattice photonic crystal (PhC) waveguide using finite difference time domain (FDTD) method. The logic operations are based on interference effect of optical waves. We have determined the operating frequency range by calculating the band structure for a perfectly periodic PhC using plane wave expansion (PWE) method. Response time of this logic gate is 1.98 ps and it can be operated with speed about 513 GB/s. The proposed device consists of four linear waveguides and a square ring resonator waveguides on PhC platform.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Monte Carlo analysis of transient electron transport in wurtzite Zn{sub 1−x}Mg{sub x}O combined with first principles calculations

Transient characteristics of wurtzite Zn{sub 1−x}Mg{sub x}O are investigated using a three-valley Ensemble Monte Carlo model verified by the agreement between the simulated low-field mobility and the experiment result reported. The electronic structures are obtained by first principles calculations with density functional theory. The results show that the peak electron drift velocities of Zn{sub 1−x}Mg{sub x}O (x = 11.1%, 16.7%, 19.4%, 25%) at 3000 kV/cm are 3.735 × 10{sup 7}, 2.133 × 10{sup 7}, 1.889 × 10{sup 7}, 1.295 × 10{sup 7} cm/s, respectively. With the increase of Mg concentration, a higher electric field is required for the onset of velocity overshoot. When the applied field exceeds 2000 kV/cm and 2500 kV/cm, a phenomena of velocity undershoot is observed in Zn{sub 0.889}Mg{sub 0.111}O and Zn{sub 0.833}Mg{sub 0.167}O respectively, while it is not observed for Zn{sub 0.806}Mg{sub 0.194}O and Zn{sub 0.75}Mg{sub 0.25}O even at 3000 kV/cm which is especially important for high frequency devices.

36 MATERIALS SCIENCE↗

Electronic and Magnetic Investigations of Rare-Earth Tm-doped AlGaN Ternary Alloy

Electronic structure and magnetic interaction of substitutional thulium rare earth-doped wurtzite Al{sub 0.5}Ga{sub 0.5}N ternary alloy have been performed using density-functional theory within local spin-density approximation with Hubbard-U corrections (LSDA+U) approach. The LSDA+U method is applied to the rare earth (RE) 4f states. The calculation of formation energy shows that it is more energetically favorable for a substitutional Tm atom to replace the Al atom than the Ga atom. For AlGaN:Tm, the lattices parameters are expanded due to larger ionic radius of Tm than that of Al atoms. The energy band gap of AlGaN:Tm has direct character and its width becomes small compared with that of AlGaN. The magnetic coupling between Tm ions in the nearest neighbor sites is ferromagnetic. Magnetic interaction of rare earth ion with the host states at the valence and conduction band edges has been investigated and compared to those of GaN:Mn and has been found to be relatively small.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unveiling the atomic and electronic structure of the VN/MgO interface

We report a quantitative comparison of the interface structure of VN/MgO(001) using ab initio density-functional theory (DFT), aberration-corrected high-resolution transmission electron microscopy (HRTEM), and electron energy-loss spectroscopy (EELS). By HRTEM, we show an atomic resolution structure of epitaxially grown VN film on MgO with a clearly resolved oxygen and nitrogen sublattice across the interface. As revealed by DFT, the (002) interplanar spacing oscillates in the first several VN layers across the interface. Interfacial chemistry determined by EELS analysis shows the preponderance of O and V atom at the interface, resulting in a small detectable core-level shift.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ferromagnetism and antiferromagnetism coexistence in SrRu{sub 1-x}Mn{sub x}O{sub 3}: Density functional calculation

We have calculated the electronic structure of SrRu{sub 1-x}Mn{sub x}O{sub 3} using the full potential linearized augmented plane wave method by LSDA and LSDA+U. The antiparallel alignment between the Mn and Ru ions are consistent with the competition between ferromagnetism and antiferromagnetism in the low Mn-doped polycrystalline samples. This is in contrast to the appearance of quantum critical point and FM and AFM transitions in the single crystal measurement. Our results show that the discrepancy between different experimental phase diagrams is related to the conditions of sample preparation and also the difference between the degree of magnetic interactions between the Mn and Ru moments. The DOS and the calculated Mn magnetic moment is similar to the magnetic moment of a purely ionic compound with d{sup 3} configuration. The AFM state has band gap of 1.2 eV at the Fermi energy predicting an insulating behavior. -- Graphical abstract: The antiparallel alignment between the Mn and Ru ions are consistent with the competition between ferromagnetism and antiferromagnetism with the formation of a spin glass phase. We have calculated the electronic structure of SrRu{sub 1-x}Mn{sub x}O{sub 3} using the full potential linearized augmented plane wave method by LSDA and LSDA+U in the range of both low and high Mn-doping for parallel and antiparallel alignments of Ru and Mn moments. In the low Mn-doped polycrystalline samples with tetragonal structure, the AFM hybridization between Mn and the Ru host lattice strongly favors alignment of the Ru moments, and provides an explanation for retaining of high Curie temperature of SrRuO{sub 3} with Mn substitution. Display Omitted Research highlights: {yields} For the low Mn-doping the AFM coupling between Mn and Ru becomes stable. {yields} Results are consistent with the QCP between FM and AFM transitions in single crystals. {yields} In high Mn-doping, electron correlation is important in predicting the insulating behavior.

36 MATERIALS SCIENCE↗

One-Dimensional Nanostructures for Neutron Detection

This report consists of four parts in addition to a publication/presentation list. Part I is on electronic structure simulations on boron nitride (BN) and BC x N nanotubes using density function theory (DFT), Part II is on fabrication and characterization of nanowire sensors, Part III is on irradiation response of BN nanotubes using molecular dynamics (MD) simulations, and Part IV is on the in-situ transmission electron microscopy (TEM) study of irradiation response of BN nanotubes.

36 MATERIALS SCIENCE↗

Effect of high hydrostatic pressure on structural stability of Ti{sub 3}GeC{sub 2}: A first-principles investigation

An investigation into the structural stability, electronic and elastic properties of Ti{sub 3}GeC{sub 2} under high hydrostatic pressure was conducted using first-principles calculations based on density functional theory (DFT). From the energy and enthalpy calculations, and the variations of elastic constants with pressure, we conclude that {alpha}-Ti{sub 3}GeC{sub 2} is most stable upon compression to 100 GPa, which is not consistent with the nonhydrostatic in situ synchrotron X-ray diffraction studies. The higher structural stability was analyzed in terms of electronic level. The absence of band gap at the Fermi level and the finite value of the density of states at the Fermi energy reveal the metallic behavior of all polymorphs of Ti{sub 3}GeC{sub 2}. -- Graphical abstract: The less phase stability of {beta}-Ti{sub 3} SiC{sub 2} compared to that of {alpha}-Ti{sub 3} SiC{sub 2} can be interpreted by the states between -6.0 and 3.6 eV shift toward the higher energy region for {beta}-Ti{sub 3} SiC{sub 2} Display Omitted Research highlights: > From the energy and enthalpy calculations of polymorphs for Ti{sub 3}GeC{sub 2}, we can conclude that Ti{sub 3}GeC{sub 2} possessed higher stable structural stability under pressure to 100 GPa, which is not consistent with the nonhydrostatic experiments. > The higher stable structure of Ti{sub 3}GeC{sub 2} is testified by the calculated variations of elastic constants with pressure. > The reasons for this higher stable phase stability were discussed in terms of the electronic level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A revised partiality model and post-refinement algorithm for X-ray free-electron laser data

An updated partiality model and post-refinement algorithm for XFEL snapshot diffraction data is presented and confirmed by observing anomalous density for S atoms at an X-ray wavelength of 1.3 Å. Research towards using X-ray free-electron laser (XFEL) data to solve structures using experimental phasing methods such as sulfur single-wavelength anomalous dispersion (SAD) has been hampered by shortcomings in the diffraction models for X-ray diffraction from FELs. Owing to errors in the orientation matrix and overly simple partiality models, researchers have required large numbers of images to converge to reliable estimates for the structure-factor amplitudes, which may not be feasible for all biological systems. Here, data for cytoplasmic polyhedrosis virus type 17 (CPV17) collected at 1.3 Å wavelength at the Linac Coherent Light Source (LCLS) are revisited. A previously published definition of a partiality model for reflections illuminated by self-amplified spontaneous emission (SASE) pulses is built upon, which defines a fraction between 0 and 1 based on the intersection of a reflection with a spread of Ewald spheres modelled by a super-Gaussian wavelength distribution in the X-ray beam. A method of post-refinement to refine the parameters of this model is suggested. This has generated a merged data set with an overall discrepancy (by calculating the R{sub split} value) of 3.15% to 1.46 Å resolution from a 7225-image data set. The atomic numbers of C, N and O atoms in the structure are distinguishable in the electron-density map. There are 13 S atoms within the 237 residues of CPV17, excluding the initial disordered methionine. These only possess 0.42 anomalous scattering electrons each at 1.3 Å wavelength, but the 12 that have single predominant positions are easily detectable in the anomalous difference Fourier map. It is hoped that these improvements will lead towards XFEL experimental phase determination and structure determination by sulfur SAD and will generally increase the utility of the method for difficult cases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A new strontium antimonate{sup III} Sr{sub 5}Sb{sub 22}O{sub 38}: Synthesis, crystal structure and characterizations

A new strontium antimonate{sup III}, Sr{sub 5}Sb{sub 22}O{sub 38}, has been hydrothermally synthesized and structurally characterized by single crystal X-ray diffraction. It crystallizes in the P2{sub 1}/n space group of the monoclinic system with a=11.739(9) Å, b=12.014(10) Å, c=16.412(13) Å, β=91.460(8)°, V=2314.0(3) Å{sup 3}. The crystal structure is built of seven trigonal–pyramidal SbO{sub 3} and four sphenoid SbO{sub 4} polyhedra which are connected through sharing corner-oxygen atoms to form the complex three-dimensional {sub ∞}{sup 3}[Sb{sub 22}O{sub 38}]{sup 10−} anionic network with two different intersectant tunnels along the [111-bar ] and [11-bar 1-bar ] directions accommodating the electric charge balanced Sr{sup 2+} cations. First-principles electronic structure calculations based on the density functional theory (DFT) and the UV–vis diffuse reflectance spectroscopy measurements both indicate that the compound belongs to a direct band insulator with an optical gap value of 3.3 eV. - Graphical abstract: The 2D Sb–O slabs are stacked through sharing oxygen atoms to form the 3D network structure of the new strontium antimonate{sup III} Sr{sub 5}Sb{sub 22}O{sub 38}. - Highlights: • A new strontium antimonate{sup III}, Sr{sub 5}Sb{sub 22}O{sub 38}, has been hydrothermally synthesized. • The single crystal structure was determined by X-ray diffraction. • The powder XRD and UV–vis absorption spectroscopy were studied. • Theoretical studies interpret the relationships between optical absorption and crystal structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spatially resolved ballistic electron spectroscopy of subsurface interfaces

Buried interfaces have traditionally been inaccessible to direct investigation by surface-sensitive techniques. A unique and novel electronic probe, which is sensitive to subsurface electronic structure, has been utilized to probe Schottky barrier interfaces. The method, ballistic electron emission microscopy (BEEM), is based on scanning tunnelling microscopy (STM) techniques. A theoretical treatment has been developed to describe the ballistic electron spectra obtained by BEEM and this treatment is applied to data obtained on the Au-Si Schottky barrier interface system. Excellent agreement between experiment and theory is obtained. In addition, the treatment predicts nanometer spatial resolution for interface imaging by BEEM.

Bell, L. D.↗