Search NASA⌕ Search

SEARCH · Search NASA

Results for “interlayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Determination of band offsets, hybridization, and exciton binding in 2D semiconductor heterostructures

Combining monolayers of different two-dimensional semiconductors into heterostructures creates new phenomena and device possibilities. Understanding and exploiting these phenomena hinge on knowing the electronic structure and the properties of interlayer excitations. Here, we determine the key unknown parameters in MoSe2/WSe2 heterobilayers by using rational device design and submicrometer angle-resolved photoemission spectroscopy (μ-ARPES) in combination with photoluminescence. We find that the bands in the K-point valleys are weakly hybridized, with a valence band offset of 300 meV, implying type II band alignment. We deduce that the binding energy of interlayer excitons is more than 200 meV, an order of magnitude higher than that in analogous GaAs structures. Hybridization strongly modifies the bands at Γ, but the valence band edge remains at the K points. We also find that the spectrum of a rotationally aligned heterobilayer reflects a mixture of commensurate and incommensurate domains. These results directly answer many outstanding questions about the electronic nature of MoSe2/WSe2 heterobilayers and demonstrate a practical approach for high spectral resolution in ARPES of device-scale structures.

2D semiconductor↗

In situ recombination junction between p-Si and TiO 2 enables high-efficiency monolithic perovskite/Si tandem cells

Increasing the power conversion efficiency of silicon (Si) photovoltaics is a key enabler for continued reductions in the cost of solar electricity. Here, we describe a two-terminal perovskite/Si tandem design that increases the Si cell’s output in the simplest possible manner: by placing a perovskite cell directly on top of the Si bottom cell. The advantageous omission of a conventional interlayer eliminates both optical losses and processing steps and is enabled by the low contact resistivity attainable between n-type TiO 2 and Si, established here using atomic layer deposition. We fabricated proof-of-concept perovskite/Si tandems on both homojunction and passivating contact heterojunction Si cells to demonstrate the broad applicability of the interlayer-free concept. Stabilized efficiencies of 22.9 and 24.1% were obtained for the homojunction and passivating contact heterojunction tandems, respectively, which could be readily improved by reducing optical losses elsewhere in the device. This work highlights the potential of emerging perovskite photovoltaics to enable low-cost, high-efficiency tandem devices through straightforward integration with commercially relevant Si solar cells.

59 BASIC BIOLOGICAL SCIENCES↗

Direct observation of minibands in a twisted graphene/WS 2 bilayer

Stacking two-dimensional (2D) van der Waals materials with different interlayer atomic registry in a heterobilayer causes the formation of a long-range periodic superlattice that may bestow the heterostructure with properties such as new quantum fractal states or superconductivity. Recent optical measurements of transition metal dichalcogenide (TMD) heterobilayers have revealed the presence of hybridized interlayer electron-hole pair excitations at energies defined by the superlattice potential. The corresponding quasiparticle band structures, so-called minibands, have remained elusive, and no such features have been reported for heterobilayers composed of a TMD and another type of 2D material. We introduce a new x-ray capillary technology for performing microfocused angle-resolved photoemission spectroscopy with a spatial resolution of ~1 μm, and directly observe minibands at certain twist angles in mini Brillouin zones (mBZs). We discuss their origin in terms of initial and final state effects by analyzing their dispersion in distinct mBZs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photonic crystals for nano-light in moiré graphene superlattices

Graphene is an atomically thin plasmonic medium that supports highly confined plasmon polaritons, or nano-light, with very low loss. Electronic properties of graphene can be drastically altered when it is laid upon another graphene layer, resulting in a moiré superlattice. The relative twist angle between the two layers is a key tuning parameter of the interlayer coupling in thus-obtained twisted bilayer graphene (TBG). We studied the propagation of plasmon polaritons in TBG by infrared nano-imaging. We discovered that the atomic reconstruction occurring at small twist angles transforms the TBG into a natural plasmon photonic crystal for propagating nano-light. This discovery points to a pathway for controlling nano-light by exploiting quantum properties of graphene and other atomically layered van der Waals materials, eliminating the need for arduous top-down nanofabrication.

charge transport↗

Tuning superconductivity in twisted bilayer graphene

Materials with flat electronic bands often exhibit exotic quantum phenomena owing to strong correlations. An isolated low-energy flat band can be induced in bilayer graphene by simply rotating the layers by 1.1°, resulting in the appearance of gate-tunable superconducting and correlated insulating phases. In this study, we demonstrate that in addition to the twist angle, the interlayer coupling can be varied to precisely tune these phases. We induce superconductivity at a twist angle larger than 1.1°—in which correlated phases are otherwise absent—by varying the interlayer spacing with hydrostatic pressure. Our low-disorder devices reveal details about the superconducting phase diagram and its relationship to the nearby insulator. Our results demonstrate twisted bilayer graphene to be a distinctively tunable platform for exploring correlated states.

charge transport↗

Autonomous alignment and healing in multilayer soft electronics using immiscible dynamic polymers

Self-healing soft electronic and robotic devices can, like human skin, recover autonomously from damage. While current devices use a single type of dynamic polymer for all functional layers to ensure strong interlayer adhesion, this approach requires manual layer alignment. In this study, we used two dynamic polymers, which have immiscible backbones but identical dynamic bonds, to maintain interlayer adhesion while enabling autonomous realignment during healing. These dynamic polymers exhibit a weakly interpenetrating and adhesive interface, whose width is tunable. When multilayered polymer films are misaligned after damage, these structures autonomously realign during healing to minimize interfacial free energy. Finally, we fabricated devices with conductive, dielectric, and magnetic particles that functionally heal after damage, enabling thin-film pressure sensors, magnetically assembled soft robots, and underwater circuit assembly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Perfect Coulomb drag and exciton transport in an excitonic insulator

Strongly coupled electron-hole bilayers can host quantum states of interlayer excitons, such as high-temperature exciton condensates at zero magnetic field. This state is predicted to feature perfect Coulomb drag, where a current in one layer is accompanied by an equal but opposite current in the other. We used an optical technique to probe the electrical transport of correlated electron-hole bilayers based on MoSe2/hBN/WSe2 heterostructures. We observed perfect Coulomb drag in the excitonic insulator phase at low temperatures; the counterflow resistance of interlayer excitons remained finite. These results indicate the formation of an exciton gas that does not condense into a superfluid. Our work demonstrates that dynamic optical spectroscopy provides a powerful tool for probing exciton transport behavior in correlated electron-hole fluids.

Qi, Ruishi↗

Spontaneous formation of robust two-dimensional perovskite phases

The two-dimensional on three-dimensional (2D/3D) perovskite bilayer heterostructure can improve the stability and performance of perovskite solar cells. We show that the 2D/3D perovskite stack in a device evolves dynamically during its end-of-life decomposition. Initially phase-pure 2D interlayers can evolve differently, resulting in different device stabilities. We show that a robust 2D interlayer can be formed using mixed solvents to regulate its crystallinity and phase purity. The resulting 2D/3D devices achieved 25.9% efficiency and had good durability, retaining 91% of their initial performance after 1074 hours at 85°C using maximum power point tracking.

14 SOLAR ENERGY↗

Neutron time-of-flight reflectometer GRAINS with horizontal sample plane at the IBR-2 reactor: Possibilities and prospects

A new time-of-flight neutron reflectometer GRAINS with a horizontal sample plane (vertical scattering plane) has recently been put into operation at the pulsed reactor IBR-2 (JINR, Dubna). The scattering geometry applied makes it possible to carry out complex studies of nanostructured interfaces in solid and liquid states by measuring the specular reflectivity and the intensity of diffuse scattering of thermal neutrons from open surfaces and hidden interlayer boundaries, including solid-liquid interfaces, over a wide momentum transfer range. The classical analysis of specular reflectivity allows one to determine the scattering length density profile in the object under study in a direction perpendicular to the interface for a thickness of ~100 nm with a resolution of 1 nm. The analysis of off-specular (diffuse) neutron scattering makes it possible to characterize lateral correlations on surfaces and interlayer boundaries. The paper summarizes the first experience in the operation of the GRAINS reflectometer. The instrument characteristics are presented together with the possibilities for experiments with solid and liquid samples illustrated with simple systems. Further steps for the development of the reflectometer are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Drag effect of electrons in a system of two graphene layers

The drag effect of charge carriers in the system of two graphene layers separated by insulator that is caused by interlayer tunneling is considered. For description of interlayer tunneling the model of randomly positioned tunnel bridges is used. The dependence of transresistivity of the system on the tunnel bridge size for different mutual orientations of graphene layers (hexagonal and Bernal orientations) was calculated. We found that for the Bernal orientation, the transresistivity is sensitive to the tunneling bridge size and tends to zero in the point contact limit. For the hexagonal orientation, the transresistivity weakly depends on the tunneling bridge size. In both cases, the transresistivity of the system strongly depends on the longitudinal magnetic field strength and the difference between the Fermi energies of quasiparticles of graphene layers. This allows one to separate directly in experiments the contribution to the transresistivity caused by tunneling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Kohn-Luttinger superconductivity in monolayer and bilayer semimetals with the Dirac spectrum

The effect of Coulomb interaction in an ensemble of Dirac fermions on the formation of superconducting pairing in monolayer and bilayer doped graphene is studied using the Kohn-Luttinger mechanism disregarding the Van der Waals potential of the substrate and impurities. The electronic structure of graphene is described using the Shubin-Vonsovsky model taking into account the intratomic, interatomic, and interlayer (in the case of bilayer graphene) Coulomb interactions between electrons. The Cooper instability is determined by solving the Bethe-Saltpeter integral equation. The renormalized scattering amplitude is obtained with allowance for the Kohn-Luttinger polarization contributions up to the second order of perturbation theory in the Coulomb interaction. It plays the role of effective interaction in the Bethe-Salpeter integral equation. It is shown that the allowance for the Kohn-Luttinger renormalizations as well as intersite Coulomb interaction noticeably affects the competition between the superconducting phases with the f-wave and d + id-wave symmetries of the order parameter. It is demonstrated that the superconducting transition temperature for an idealized graphene bilayer with significant interlayer Coulomb interaction between electrons is noticeably higher than in the monolayer case.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamic magnetic permeability of the heterogeneous nanosystems based on (Co{sub 41}Fe{sub 39}B{sub 20}){sub x}(SiO{sub 2}){sub 100–} {sub x} composites

Thin films of (Co{sub 41}Fe{sub 39}B{sub 20}){sub x}(SiO{sub 2}){sub 100–} {sub x} nanocomposites and hybrid nanocomposite–semiconductor [(Co{sub 41}Fe{sub 39}B{sub 20}){sub x}(SiO{sub 2}){sub 100–} {sub x}/C]{sub 50} multilayers are synthesized by ion-beam deposition at various contents x of ferromagnetic metallic Co{sub 41}Fe{sub 39}B{sub 2O} nanogranules in an SiO{sub 2} matrix and at various carbon layer thicknesses h < 2 nm. Their magnetic and electrical properties, high-frequency magnetic permeability, magnetooptical spectra, and FMR spectra are studied. It is found that both the single-layer nanocomposites and the multilayers with carbon interlayers are superparamagnetic at x < x{sub per}, where x{sub per} is the electric conduction percolation threshold: a hysteresis at room temperature is absent, and the blocking temperature determined in quasi-static measurements does not exceed 20–30 K and weakly depends on the carbon layer thickness. At a carbon layer thickness h = 1.2–1.8 nm, the real and imaginary parts of complex magnetic permeability at 50 MHz and room temperature are substantially higher than those of the nanocomposites without carbon layers: their values are typical of ferromagnets. This dependence points to an exchange interaction between nanogranules in layers through a carbon interlayer. The influence of a conducting layer on the static and dynamic magnetic properties of a system of interacting superparamagnetic particles is discussed.

36 MATERIALS SCIENCE↗

Charge Transfer between Layers in a Bilayer Quasi-Two-Dimensional (BEDT-TTF){sub 4}CoBr{sub 4}(C{sub 6}H{sub 4}Cl{sub 2}) Organic Metal

Based on the analysis of the behavior of the magnetoresistance, the regime of interlayer charge transport in a bilayer quasi-two-dimensional (BEDT-TTF){sub 4}CoBr{sub 4}(C{sub 6}H{sub 4}Cl{sub 2}) organic metal is discussed. It is noted that a strongly incoherent mode is the most likely in the entire temperature range 1.5–300 K. The metallic type of the temperature dependence of the interlayer resistance at low temperatures is most likely associated with charge transfer through resonant impurities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Excitons and Trions in Bilayer van der Waals Heterostructures

Excitons and trions in bilayer structures based on transition metal dichalcogenides are theoretically studied. Expressions for the effective potential of interparticle interaction in such a system with allowance for a significant dielectric contrast in the heterostructure are obtained. Simple and physically justified variational functions for electron–hole complexes are proposed. A variational calculation of the exciton and trion binding energies as functions of the interlayer distance, taking into account the specific features of the screening of the Coulomb interaction, is performed. The accuracy of the variational approach is confirmed by direct numerical calculation of the exciton binding energy as a function of the interlayer distance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrochemical Performance and Stability of the Cathode for Solid Oxide Fuel Cells II. Role of Ni diffusion on LSM performance

The sintering of a standard (La 0.8 Sr 0.2 ) 0.98 MnO 3 (LSM-20) solid oxide fuel cell cathode composition (in the temperature range of 1050-1200ºC) on anode-supported cells utilizing a Ni-YSZ anode and thin YSZ electrolyte (<10 μm thickness) has revealed the need for a protective ceria interlayer to prevent a detrimental interaction between the YSZ and the LSM. The interaction, however, is not the typically assumed formation of insulating La- and/or Sr-zirconate, but rather the result of Ni diffusion from the anode through the YSZ electrolyte and into the LSM resulting in coarsening and increased densification of the LSM microstructure. As an alternative to the use of a protective ceria interlayer, the presence of YSZ in the cathode material was able to suppress coarsening of LSM, thereby significantly improving the electrochemical performance.

30 DIRECT ENERGY CONVERSION↗

Bismuth Enables the Formation of Disordered Birnessite in Rechargeable Alkaline Batteries

Recent advances in rechargeable Zn/MnO$_2$ alkaline batteries have shown promise for scalable energy storage systems which provide a safe, low-cost alternative with a demonstrated lifetime over thousands of cycles. This cathode technology is based on a 2-electron Mn redox process where a layered birnessite-type phase has been shown to form after the first cycle with excellent reversibility between the discharge product, Mn(OH)$_2$. Herein, we investigate the reversible reaction between birnessite and Mn(OH)$_2$ with and without a Bi$_2$O$_3$ additive using multimodal structural characterization techniques during active battery cycling. Diffraction results provide evidence of Bi$^{3+}$ residing in the interlayer of birnessite which prevents irreversible Mn$_3$O$_4$ formation by limiting Mn$^{3+}$ diffusion within the crystal lattice. Also, upon charge no MnOOH intermediate phases are observed. Instead, X-ray absorption and Raman spectroscopy indicate a disordered, non-crystalline birnessite-type phase consisting of mostly neutral H$_2$O within the interlayer. Birnessite phases will reform without Bi$_2$O$_3$ present, but Mn$_3$O$_4$ formation severely polarizes the potential they are formed at, leading to capacity fade. Also, we discuss the reversible Bi$_2$O$_3$ conversion to Bi$^0$ and its contribution to the observed capacity. We expect the results will provide crucial insight into the development of aqueous, rechargeable battery systems utilizing MnO 2 .

25 ENERGY STORAGE↗

Demonstration of Electrochemically-Driven CO 2 Separation Using Hydroxide Exchange Membranes

Hydroxide exchange membrane fuel cells (HEMFCs) are a potentially lower-cost hydrogen fuel cell technology; however, ambient levels of CO 2 in air significantly reduce HEMFCs’ performance. In this work, we demonstrate an electrochemically-driven CO 2 separator (EDCS) which can be used to remove ambient levels of CO 2 from air upstream of the HEMFC stack in fuel cell vehicles, protecting it from CO 2 -related performance losses. The EDCS operating window was explored for current density, anode flow, and cathode flow with respect to its impact on CO 2 separation performance. Additionally, gas-phase mass transport was improved by selecting flow fields and gas diffusion layers conducive to the EDCS operating regime. The use of a carbon-ionomer interlayer at the cathode was explored and improved CO 2 removal performance from 77.7% to 98.2% at 20 mA cm −2 . An analytical, 1-D model is used to explain the experimental observations and design improvements. A single-cell, 25 cm 2 EDCS using the aforementioned improved design demonstrated greater than 98% CO 2 removal at a cathode flow rate of 1300 sccm for 100 h with 2.7% hydrogen stack consumption.

Matz, Stephanie↗

SrZrO 3 Formation at the Interlayer/Electrolyte Interface during (La 1-x Sr x ) 1-δ Co 1-y Fe y O 3 Cathode Sintering

This work probes the formation of SrZrO 3 at the SDC/YSZ interface (Sm doped ceria, SDC; Y stabilized zirconia, YSZ) during (La 1-x Sr x ) 1-δ Co1 -y Fe y O 3 (LSCF) cathode sintering. SEM/EDS and grazing incidence X-ray diffraction results of annealed LSCF and YSZ samples reveal that even without physical contact between LSCF and YSZ, SrZrO 3 was formed on the surface of YSZ, preferentially at the grain boundaries. It was suspected that the SrZrO 3 formation is due to the Sr-containing gas species diffused through the pores of the SDC layer and reacted with the YSZ electrolyte. Computational thermodynamics was adopted to predict the gas species formed in air during sintering by using the La-Sr-Co-Fe-O-H thermodynamic database. Sr(OH) 2 is identified as the dominant Sr-containing gas species under the experimental conditions. In addition, it was found that A-site deficiency in LSCF could effectively suppress the SrZrO 3 formation while a dense and pore-free SDC interlayer is required to totally block the SrZrO 3 formation. As a result, cell performance was significantly improved for a cell with a dense SDC interlayer fabricated by pulsed laser deposition, due to elimination of SrZrO 3 formation and therefore reduced interfacial resistance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗