Search NASA⌕ Search

SEARCH · Search NASA

Results for “large system simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Power System Network Reduction for Power Hardware-in-the-Loop Simulation

This paper proposes single-port equivalent and two-port equivalent network reduction methods to respectively reduce single-port and two-port areas in a large power network. Parameters of the reduced systems are rigorously derived, which guarantees that the electrical quantities at the port(s) remain unchanged over the reduction, including voltage magnitude and phase and active and reactive power injections into the area to be reduced. The proposed techniques are applied to reduce a practical Maui grid, where the total numbers of buses, lines and transformers are respectively reduced from 212, 106 and 108 to 45, 30 and 13. Dynamic behaviors between the full model and the reduced model are compared in detail to illustrate the efficacy and accuracy of the proposed network reduction.

model reduction↗

Power System Network Reduction for Power Hardware-in-the-Loop Simulation: Preprint

This paper proposes a single-port equivalent and a two-port equivalent to respectively reduce single-port and two-port areas in a large power network. Parameters of the reduced systems are rigorously derived, which guarantees that the electrical quantities at the port remain unchanged over the reduction, including voltage magnitude and phase, active and reactive power injections into the area to be reduced. The proposed techniques are applied to reduce a practical Maui grid, where the total numbers of buses, lines and transformers are respectively reduced from 212, 106 and 108 to 45, 30 and 13. Dynamic behaviors between the full model and the reduced model are compared in detail to illustrate the efficacy and accuracy of the proposed network reduction.

41 EE - Solar Energy Technologies Office (EE-4S)↗

Enhanced dynamic equivalent identification method of large-scale power systems using multiple events

The increasing complexity of the interconnected power system makes high-fidelity dynamic simulation models computationally more intensive. To improve computation efficiency, model reduction techniques have been investigated to only preserve the dynamics in a limited area of interest (study area), while deriving equivalent representation for the external area. For this purpose, a measurement-based reduction approach using system identification techniques has been previously proposed. Accordingly, external areas are represented by dynamic equivalent loads using transfer function estimation. In this paper, in order to enhance the accuracy of the reduced model in preserving dynamics of the study area, multiple “grid” events of different types and at different locations are considered for identifying the parameters of the equivalent loads. Additionally, case studies are carried out in the NPCC 140-bus system. Comparisons are made between multiple events training and single event training, highlighting the advantages of the proposed method in providing a better representation of the grid dynamics under different operating conditions.

24 POWER TRANSMISSION AND DISTRIBUTION↗

In-Situ Feature Extraction of Large Scale Combustion Simulations Using Segmented Merge Trees, In: SC '14: Proceedings of the International Conference for High Performance Computing, Networking, Storage and Analysis

The ever increasing amount of data generated by scientific simulations coupled with system I/O constraints are fueling a need for in-situ analysis techniques. Of particular interest are approaches that produce reduced data representations while maintaining the ability to redefine, extract, and study features in a post-process to obtain scientific insights. This paper presents two variants of in-situ feature extraction techniques using segmented merge trees, which encode a wide range of threshold based features. The first approach is a fast, low communication cost technique that generates an exact solution but has limited scalability. The second is a scalable, local approximation that nevertheless is guaranteed to correctly extract all features up to a predefined size. We demonstrate both variants using some of the largest combustion simulations available on leadership class supercomputers. Our approach allows state-of-the-art, feature-based analysis to be performed in-situ at significantly higher frequency than currently possible and with negligible impact on the overall simulation runtime.

Computer Science↗

Projected Demand and Potential Impacts to the National Airspace System of Autonomous, Electric, On-Demand Small Aircraft

Electric propulsion and autonomy are technology frontiers that offer tremendous potential to achieve low operating costs for small-aircraft. Such technologies enable simple and safe to operate vehicles that could dramatically improve regional transportation accessibility and speed through point-to-point operations. This analysis develops an understanding of the potential traffic volume and National Airspace System (NAS) capacity for small on-demand aircraft operations. Future demand projections use the Transportation Systems Analysis Model (TSAM), a tool suite developed by NASA and the Transportation Laboratory of Virginia Polytechnic Institute. Demand projections from TSAM contain the mode of travel, number of trips and geographic distribution of trips. For this study, the mode of travel can be commercial aircraft, automobile and on-demand aircraft. NASA's Airspace Concept Evaluation System (ACES) is used to assess NAS impact. This simulation takes a schedule that includes all flights: commercial passenger and cargo; conventional General Aviation and on-demand small aircraft, and operates them in the simulated NAS. The results of this analysis projects very large trip numbers for an on-demand air transportation system competitive with automobiles in cost per passenger mile. The significance is this type of air transportation can enhance mobility for communities that currently lack access to commercial air transportation. Another significant finding is that the large numbers of operations can have an impact on the current NAS infrastructure used by commercial airlines and cargo operators, even if on-demand traffic does not use the 28 airports in the Continental U.S. designated as large hubs by the FAA. Some smaller airports will experience greater demand than their current capacity allows and will require upgrading. In addition, in future years as demand grows and vehicle performance improves other non-conventional facilities such as short runways incorporated into shopping mall or transportation hub parking areas could provide additional capacity and convenience.

Smith, Jeremy C.↗

Enhanced Dynamic Equivalent Identification Method of Large-Scale Power Systems Using Multiple Event

The increasing complexity of the interconnected power system makes high-fidelity dynamic simulation models computationally more intensive. To improve computation efficiency, model reduction techniques have been investigated to only preserve the dynamics in a limited area of interest (study area), while deriving equivalent representation for the external area. For this purpose, a measurement-based reduction approach using system identification techniques has been previously proposed. In that case, external areas are represented by dynamic equivalent loads using transfer function estimation. In this paper, in order to enhance the accuracy of the reduced model in preserving dynamics of the study area, multiple “grid” events of different types and at different locations are considered for identifying the parameters of the equivalent loads. Case studies are carried out in the NPCC 140-bus system. Comparison are made between multiple events training and single event training, highlighting the advantages of the proposed method in providing a better representation of the grid dynamics under different operating conditions.

Xue, Yaosuo↗

Overview of New Tools to Perform Safety Analysis: BWR Station Black Out Test Case

Dynamic Probabilistic Risk Assessment (DPRA) methodologies couple system simulator codes (e.g., RELAP, MELCOR) with simulation controller codes (e.g., RAVEN, ADAPT). While system simulator codes accurately model system dynamics deterministically, simulation controller codes introduce both deterministic (e.g., system control logic, operating procedures) and stochastic (e.g., component failures, parameter uncertainties) elements into the simulation. Typically, a DPRA is performed by: 1) sampling values of a set of parameters from the uncertainty space of interest (using the simulation controller codes), and 2) simulating the system behavior for that specific set of parameter values (using the system simulator codes). For complex systems, one of the major challenges in using DPRA methodologies is to analyze the large amount of information (i.e., large number of scenarios ) generated, where clustering techniques are typically employed to allow users to better organize and interpret the data. In this paper, we focus on the analysis of a nuclear simulation dataset that is part of the Risk Informed Safety Margin Characterization (RISMC) Boiling Water Reactor (BWR) station blackout (SBO) case study. We apply a software tool that provides the domain experts with an interactive analysis and visualization environment for understanding the structures of such high-dimensional nuclear simulation datasets. Our tool encodes traditional and topology-based clustering techniques, where the latter partitions the data points into clusters based on their uniform gradient flow behavior. We demonstrate through our case study that both types of clustering techniques complement each other in bringing enhanced structural understanding of the data.

97 MATHEMATICS AND COMPUTING↗

Unsteady turbomachinery flow simulations on massively parallel architectures

The accurate numerical simulation of unsteady, three-dimensional viscous flow in turbomachines is computationally very intensive, requiring prohibitively large amounts of computer time on current vector supercomputers. In recent years, computer systems based on massively parallel architectures have been developed that offer the promise of meeting the computational power requirements of such large-scale simulations. However, a rethinking of existing algorithms and methodology is required in order to fully harness the computational power of such architectures. In this paper the capabilities of the Connection Machine (CM-2) in predicting unsteady flows in turbomachines are evaluated. The implementation on the CM-2 of an implicit, time-accurate, zonal algorithm for the Navier-Stokes equations in two dimensions is described. Programming issues and modifications made to the original algorithm (developed for vector, pipelined supercomputers) in order to improve performance on the CM-2 are outlined. Algorithm performance is evaluated and compared with a functionally equivalent code for the CRAY-YMP.

Madavan, N. K.↗

Surface tension propellant control for Viking 75 Orbiter

The paper describes the selection, development and qualification of the surface tension system and includes results of low-g drop tower tests of scale models, 1-g simulation tests of low-g large ullage settling and liquid withdrawal, structural qualification tests, and propellant surface tension/contact angle studies. Subscale testing and analyses were used to evaluate the ability of the system to maintain or recover the desired propellant orientation following possible disturbances during the Viking mission. This effort included drop tower tests to demonstrate that valid wick paths exist for moving any displaced propellant back over the tank outlet. Variations in surface tension resulting from aging, temperature, and lubricant contamination were studied and the effects of surface finish, referee fluid exposure, aging, and lubricant contamination on contact angle were assessed. Results of movies of typical subscale drop tower tests and full scale slosh tests are discussed.

Dowdy, M. W.↗

Informing the Space Launch System Booster Separation Initial CFD Run Matrix with Observed Parametric Sensitivity

It currently requires significant computational cost to simulate the flow physics of the booster separation event on the Space Launch System. This comes from the large parametric space in which the event occurs, as pre-separation flight conditions and separated booster core-relative trajectories can vary. Functionally removing the risk of core-booster collision mandates careful assessment of the fluid dynamics in terms of several trajectory parameters. However, simulating the entire trajectory envelope is computationally intractable given the high parametric dimension. In order to reduce the uncertainty in the resulting low-parametric-resolution aerodynamic booster separation database, a data-driven approach was developed to select which breakpoints should be studied by simulations and experiments and which should be relegated to a regression-based interpolation procedure. This technique works by simulating cases where the flow physics are most sensitive to changes in the parameters and leaving the less parametrically sensitive regions for interpolation. The result is a booster separation run matrix whose computational cost is comparable to that of previous database generations but has lower interpolation errors.

SLS↗

Informing the Space Launch System Booster Separation Initial CFD Run Matrix with Observed Parametric Sensitivity

It currently requires significant computational cost to simulate the flow physics of the booster separation event on the Space Launch System. This comes from the large parametric space in which the event occurs, as pre-separation flight conditions and separated booster core-relative trajectories can vary. Functionally removing the risk of core-booster collision mandates careful assessment of the fluid dynamics in terms of several trajectory parameters. However, simulating the entire trajectory envelope is computationally intractable given the high parametric dimension. In order to reduce the uncertainty in the resulting low-parametric-resolution aerodynamic booster separation database, a data-driven approach was developed to select which breakpoints should be studied by simulations and experiments and which should be relegated to a regression-based interpolation procedure. This technique works by simulating cases where the flow physics are most sensitive to changes in the parameters and leaving the less parametrically sensitive regions for interpolation. The result is a booster separation run matrix whose computational cost is comparable to that of previous database generations but has lower interpolation errors.

SLS↗

The Dynamic of Complex Two-Phase Mixtures During Coarsening: From Dendritic to Bicontinuous Mixtures

Dendrites are tree-like crystals that frequently form during the solidification of castings. In systems with nearly isotropic interfacial energy, these dendrites possess secondary and sometimes even tertiary arms, and lead to morphologically complex two-phase mixtures. Dealloying, in which one component is selectively leached, leads to nanoporous structures that have proven useful for many technological applications. These bicontinuous two-phase mixtures are topologically and morphologically complex with spatially varying mean and Gaussian curvatures. The evolution of these structures during coarsening is of considerable technological importance since the morphology of the dendrites and nanoporous structure sets the properties of the resulting material. During coarsening, the total surface area per volume of the mixture decreases, thus resulting in an increase in the size-scale of the two-phase mixture. The evolution of interfacial morphology of these interconnected two-phase mixtures is being studied using large-scale computer simulations. The simulations are used to develop a theory of coarsening in these systems that will elucidate the impact of the complicated morphology found in dendritic and nanoporous systems on the coarsening process. The experiments employ four-dimensional X-ray microtomography, which enables the morphology of the two-phase mixture to be followed in three dimensions and time (an additional dimension). The experiments also serve as a test of simulations and theory of the coarsening process, as well as to provide initial conditions for the simulations. Through these experiments and theory, we aim to develop a comprehensive description of coarsening in these complex and technologically important two-phase mixtures.

36 MATERIALS SCIENCE↗

Coarse-grained molecular dynamics simulation of the interface behaviour and self-assembly of CTAB cationic surfactants

Here, we study the behaviour at interfaces and the micelle self-assembly of a cationic surfactant (CTAB) by Molecular Dynamics (MD) simulations of coarse-grained models. We consider both the standard (with explicit water) Martini force field and the implicit solvent version of the Martini force field (Dry Martini). First, we study the behaviour of CTAB at a water/vacuum interface, at a water/organic solvent interface and in a pre-assembled CTAB micelle using both standard and Dry Martini and all-atomic simulations. Our results indicate that there are significant quantitative differences between the predictions of the two models. Interestingly, implicit solvent simulations with Dry Martini show good quantitative agreement with all-atomic MD simulations, better than explicit solvent Martini MD simulations. The computational efficiency of the Martini and Dry Martini models allowed us to study the self-assembly of CTAB in a large system with many micelles. We observe the self-assembly of CTAB into micelles and also the exchange of CTAB molecules between micelles by events such as micelle fusion and fission which are difficult to observe in all-atomic MD simulations due to the time and length scales involved. Under the studied conditions, both Martini models predict a rather different self-assembly behaviour. The standard Martini model predicts a final equilibrium state with spherical micelles with an average size of ≈70 CTAB molecules. In contrast, the Dry Martini model predicts the formation of large tubular micelles with ≈330 CTAB molecules. Compared with experiments, standard Martini and Dry Martini underestimate and overestimate, respectively, the micelle size.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Segregated Approach for Modeling the Electrochemistry in the 3-D Microstructure of Li-Ion Batteries and Its Acceleration Using Block Preconditioners

Abstract Battery performance is strongly correlated with electrode microstructure. Electrode materials for lithium-ion batteries have complex microstructure geometries that require millions of degrees of freedom to solve the electrochemical system at the microstructure scale. A fast-iterative solver with an appropriate preconditioner is then required to simulate large representative volume in a reasonable time. In this work, a finite element electrochemical model is developed to resolve the concentration and potential within the electrode active materials and the electrolyte domains at the microstructure scale, with an emphasis on numerical stability and scaling performances. The block Gauss-Seidel (BGS) numerical method is implemented because the system of equations within the electrodes is coupled only through the nonlinear Butler–Volmer equation, which governs the electrochemical reaction at the interface between the domains. The best solution strategy found in this work consists of splitting the system into two blocks—one for the concentration and one for the potential field—and then performing block generalized minimal residual preconditioned with algebraic multigrid, using the FEniCS and the Portable, Extensible Toolkit for Scientific Computation libraries. Significant improvements in terms of time to solution (six times faster) and memory usage (halving) are achieved compared with the MUltifrontal Massively Parallel sparse direct Solver. Additionally, BGS experiences decent strong parallel scaling within the electrode domains. Last, the system of equations is modified to specifically address numerical instability induced by electrolyte depletion, which is particularly valuable for simulating fast-charge scenarios relevant for automotive application.

25 ENERGY STORAGE↗

Attribution of the role of climate change in the forest fires in Sweden 2018

In this study, we analyse the role of climate change in the forestfires that raged through large parts of Sweden in the summer of 2018 from ameteorological perspective. This is done by studying the Canadian FireWeather Index (FWI) based on sub-daily data, both in reanalysis data sets(ERA-Interim, ERA5, the Japanese 55 year Reanalysis, JRA-55, and Modern-Era Retrospective analysis for Research and Applications version 2, MERRA-2) and three large-ensemble climatemodels (EC-Earth, weather@home, W@H, and Community Earth System Model, CESM) simulations. The FWI, based on reanalysis, correlates well with the observed burnt area in summer (r=0.6 to 0.8). We find that the maximum FWI in July 2018 had return times of ~24 years (90 % CI, confidence interval, > 10 years) for southern and northern Sweden. Furthermore, we find a negative trend of the FWI for southern Sweden over the 1979 to 2017 time period in the reanalyses, yielding a non-significant reduced probability of such an event. However, the short observational record, large uncertainty between the reanalysis products and large natural variability of the FWI give a large confidence interval around this number that easily includes no change, so we cannot draw robust conclusions from reanalysis data. The three large-ensembles with climate models point to a roughly 1.1 (0.9 to 1.4) times increased probability (non-significant) for such events in the current climate relative to preindustrial climate. For a future climate (2 °C warming), we find a roughly 2 (1.5 to 3) times increased probability for such events relative to the preindustrial climate. The increased fire weather risk is mainly attributed to the increase intemperature. The other main factor, i.e. precipitation during summer months, isprojected to increase for northern Sweden and decrease for southern Sweden. We, however, do not find a clear change in prolonged dry periods in summer months that could explain the increased fire weather risk in the climate models. In summary, we find a (non-significant) reduced probability of such eventsbased on reanalyses, a small (non-significant) increased probability due to global warming up to now and a more robust (significant) increase in the risk for such events in the future based on the climate models.

54 ENVIRONMENTAL SCIENCES↗

Real-Time Simulation of Modular Multilevel Converters

Modular multilevel converters (MMCs) are one of the most popular configurations of voltage-source converters (VSCs) used in applications like high-voltage direct current (HVdc) transmission systems and flexible alternate current transmission systems (FACTS). They have a large number of modules with thousands of capacitors and semiconductor devices, which make it hard to simulate in real-time. In this paper, a low-cost high-performance computing (HPC) configuration to simulate MMCs in real-time is proposed. The configuration uses a HPC digital signal processor (DSP) with 8 cores. An advanced MMC simulation algorithm is implemented using HPC techniques to optimize the real-time performance in the DSP. A comparison is performed with existing solutions to show the superiority of the proposed configuration and algorithms.

Debnath, Suman↗

Scaling from Flux Towers to Ecosystem Models: Regional Constraints on Carbon Cycle Processes from Atmospheric Carbonyl Sulfide (Final Report)

DOE supported research suggests that gross primary productivity (GPP) is largely underestimated by global earth system models [Welp et al., 2011], reflecting the persistent challenge in extrapolating from local-scale GPP observations to global-scale earth system models. This poor understanding of GPP at large spatial scales is of particular concern in tropical forests. In tropical forests, some earth systems models forecast a powerful feedback between a warming climate and a decline in GPP resulting in forest dieback. While this simulated feedback is intensely debated, we lack robust large-scale constraints on GPP that are needed to resolve this debate. In particular, carbon dioxide measurements provide valuable information on net carbon flux, but not on the gross flux associated with GPP. Here we conducted a study of regional-to-global scale GPP using atmospheric carbonyl sulfide to provide a new constraint on GPP mechanisms in earth system models. Our project activities integrated modeling, in situ measurement, and remote sensing techniques to resolve GPP for the Amazon as well as global scale trends. The results of this work included initiating airborne carbonyl sulfide monitoring in the Amazon, training for postdocs and graduate students at a Hispanic Serving Institution, fundamental advances in carbonyl sulfide budgets [e.g. Hilton et al., Nature Climate Change, 2017], and high-profile publications that focused on GPP trends for the Amazon [Stinecipher et al., GRL, 2022] and global historical GPP trends [Campbell, et al., Nature, 2017]. Based on the suggestion of our DOE program manager, we published a state-of-the-science commentary to the scientific community on GPP monitoring with COS [Campbell et al., EOS, 2017] which was selected as the cover story. DOE support was acknowledged in all reports. The importance of this research to understanding climate change was communicated to the general public through community seminars (Rotary, Public Libraries, State Parks), an op-ed (SF Chronicle), and interviews in the mass media including two stories in the New York Times (4/5/17; 7/30/18), one of which was especially widely read after it was featured in the New York Time’s Quote of the Day.

54 ENVIRONMENTAL SCIENCES↗

Structural Simluation Toolkit (SST) v.12.0

The Structural Simulation Toolkit (SST) was developed to explore innovations in highly concurrent computing systems where the instruction set architecture (ISA), micro-architecture, and memory interact with the programming model and communications system. The package provides a fully modular design for extensive exploration of an individual system parameter as well as a parallel simulation environment based on message passing interface (MPI) which enable a high level of performance as well as the ability to look at large systems. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Rodrigues, ArunF.↗