Search NASA⌕ Search

SEARCH · Search NASA

Results for “matrix structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
DOE OSTI2011

Quantum mechanics without an equation of motion

We propose a formulation of quantum mechanics for a finite level system whose potential function is not realizable and/or analytic solution of the wave equation is not feasible. The system's wavefunction is written as an infinite sum in a complete set of square integrable functions. Interaction in the theory is introduced in function space by a real finite tridiagonal symmetric matrix. The expansion coefficients of the wavefunction satisfy a three-term recursion relation incorporating the parameters of the interaction. Information about the structure and dynamics of the system is contained in the scattering matrix, which is defined in the usual way. The bound state energy spectrum (system's structure) is finite. Apart from the 2M- 1 dimensionless parameters of the interaction matrix, whose rank is M, the theory has one additional scale parameter. In the development, we utilize the kinematic tools of the J-matrix method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2012

Scintillator high-gain avalanche rushing photoconductor active-matrix flat panel imager: Zero-spatial frequency x-ray imaging properties of the solid-state SHARP sensor structure

Purpose: The authors are investigating the feasibility of a new type of solid-state x-ray imaging sensor with programmable avalanche gain: scintillator high-gain avalanche rushing photoconductor active matrix flat panel imager (SHARP-AMFPI). The purpose of the present work is to investigate the inherent x-ray detection properties of SHARP and demonstrate its wide dynamic range through programmable gain. Methods: A distributed resistive layer (DRL) was developed to maintain stable avalanche gain operation in a solid-state HARP. The signal and noise properties of the HARP-DRL for optical photon detection were investigated as a function of avalanche gain both theoretically and experimentally, and the results were compared with HARP tube (with electron beam readout) used in previous investigations of zero spatial frequency performance of SHARP. For this new investigation, a solid-state SHARP x-ray image sensor was formed by direct optical coupling of the HARP-DRL with a structured cesium iodide (CsI) scintillator. The x-ray sensitivity of this sensor was measured as a function of avalanche gain and the results were compared with the sensitivity of HARP-DRL measured optically. The dynamic range of HARP-DRL with variable avalanche gain was investigated for the entire exposure range encountered in radiography/fluoroscopy (R/F) applications. Results: The signal from HARP-DRL as a function of electric field showed stable avalanche gain, and the noise associated with the avalanche process agrees well with theory and previous measurements from a HARP tube. This result indicates that when coupled with CsI for x-ray detection, the additional noise associated with avalanche gain in HARP-DRL is negligible. The x-ray sensitivity measurements using the SHARP sensor produced identical avalanche gain dependence on electric field as the optical measurements with HARP-DRL. Adjusting the avalanche multiplication gain in HARP-DRL enabled a very wide dynamic range which encompassed all clinically relevant medical x-ray exposures. Conclusions: This work demonstrates that the HARP-DRL sensor enables the practical implementation of a SHARP solid-state x-ray sensor capable of quantum noise limited operation throughout the entire range of clinically relevant x-ray exposures. This is an important step toward the realization of a SHARP-AMFPI x-ray flat-panel imager.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2014

Multi-layer Potfit: An accurate potential representation for efficient high-dimensional quantum dynamics

The multi-layer multi-configuration time-dependent Hartree method (ML-MCTDH) is a highly efficient scheme for studying the dynamics of high-dimensional quantum systems. Its use is greatly facilitated if the Hamiltonian of the system possesses a particular structure through which the multi-dimensional matrix elements can be computed efficiently. In the field of quantum molecular dynamics, the effective interaction between the atoms is often described by potential energy surfaces (PES), and it is necessary to fit such PES into the desired structure. For high-dimensional systems, the current approaches for this fitting process either lead to fits that are too large to be practical, or their accuracy is difficult to predict and control. This article introduces multi-layer Potfit (MLPF), a novel fitting scheme that results in a PES representation in the hierarchical tensor (HT) format. The scheme is based on the hierarchical singular value decomposition, which can yield a near-optimal fit and give strict bounds for the obtained accuracy. Here, a recursive scheme for using the HT-format PES within ML-MCTDH is derived, and theoretical estimates as well as a computational example show that the use of MLPF can reduce the numerical effort for ML-MCTDH by orders of magnitude, compared to the traditionally used POTFIT representation of the PES. Moreover, it is shown that MLPF is especially beneficial for high-accuracy PES representations, and it turns out that MLPF leads to computational savings already for comparatively small systems with just four modes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Development of alpha cluster structure in nuclei of the same mass number

The resonant 14 N+α particle scattering was studied in the 18 F excitation region from 6.5 to 9 MeV at Astana cyclotron using the TTIK approach. The excitation functions for the elastic 14 N+α scattering were analyzed in the framework of R-matrix approach. The observed strong alpha cluster structure in 18 F is compared with that in 18 O.

Nurmukhanbetova, Aliya↗
DOE OSTI2011

Characterization of cell surface and extracellular matrix remodeling of Azospirillum brasilense chemotaxis-like 1 signal transduction pathway mutants by atomic force microscopy

To compete in complex microbial communities, bacteria must sense environmental changes and adjust cellular functions for optimal growth. Chemotaxis-like signal transduction pathways are implicated in the regulation of multiple behaviors in response to changes in the environment, including motility patterns, exopolysaccharide production, and cell-to-cell interactions. In Azospirillum brasilense, cell surface properties, including exopolysaccharide production, are thought to play a direct role in promoting flocculation. Recently, the Che1 chemotaxis-like pathway from A. brasilense was shown to modulate flocculation, suggesting an associated modulation of cell surface properties. Using atomic force microscopy, distinct changes in the surface morphology of flocculating A. brasilense Che1 mutant strains were detected. Whereas the wild-type strain produces a smooth mucosal extracellular matrix after 24 h, the flocculating Che1 mutant strains produce distinctive extracellular fibril structures. Further analyses using flocculation inhibition, lectin-binding assays, and comparison of lipopolysaccharides profiles suggest that the extracellular matrix differs between the cheA1 and the cheY1 mutants, despite an apparent similarity in the macroscopic floc structures. Collectively, these data indicate that disruption of the Che1 pathway is correlated with distinctive changes in the extracellular matrix, which likely result from changes in surface polysaccharides structure and/or composition.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2000

Process of making carbon-carbon composites

A carbon composite structure, for example, an automotive engine piston, is made by preparing a matrix including of a mixture of non crystalline carbon particulate soluble in an organic solvent and a binder that has a liquid phase. The non crystalline particulate also contains residual carbon hydrogen bonding. An uncured structure is formed by combining the matrix mixture, for example, carbon fibers such as graphite dispersed in the mixture and/or graphite cloth imbedded in the mixture. The uncured structure is cured by pyrolyzing it in an inert atmosphere such as argon. Advantageously, the graphite reinforcement material is whiskered prior to combining it with the matrix mixture by a novel method involving passing a gaseous metal suboxide over the graphite surface.

Withers, James C.↗
DOE OSTI2017

Coherence Evolution and Transfer Supplemented by Sender’s Initial-State Restoring

The evolution of quantum coherences comes with a set of conservation laws provided that the Hamiltonian governing this evolution conserves the spin-excitation number. At that, coherences do not intertwist during the evolution. Using the transmission line and the receiver in the initial ground state we can transfer the coherences to the receiver without interaction between them, although the matrix elements contributing to each particular coherence intertwist in the receiver’s state. Therefore we propose a tool based on the unitary transformation at the receiver side to untwist these elements and thus restore (at least partially) the structure of the sender’s initial density matrix. A communication line with two-qubit sender and receiver is considered as an example of implementation of this technique.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1974

Development of technology for fluid-structure interaction modeling of a 1/8-scale dynamic model of shuttle External Tank (ET). Volume i: Technical report

A NASTRAN analysis of the external tank (ET) substructure of the 1/8-scale space shuttle structural dynamics model is described. The NASTRAN hydroelastic procedures were used to form a model of the liquid oxygen portion of the ET. Large computer storage requirements and running times were required unless these procedures were modified. Several possibilities were demonstrated including the substitution of the real for the complex eigenvalue routine and the use of the OMIT capability to reduce the number of fluid coordinates. A NASTRAN model of the complete ET was formed and reduced to 252 degrees of freedom. A review of the eigenvector extracted, using the unsymmetrical inverse power method, indicated that the structural OMIT's resulted in unsatisfactory modal deflections. Modifications to the NASTRAN hydroelastic capability appeared necessary to generate a successful ET model. An approach is described which, by assuming incompressibility, reduces the fluid representation to a symmetric mass matrix which can be added to the structural mass. The problem is solved using faster and more efficient eigenvalue routines. Using this approach the ET NASTRAN model was analyzed for three separate weight conditions.

Bernstein, M.↗
DOE OSTI2021

Atomic arrangements in an amorphous CoFeB ribbon extracted via an analysis of radial distribution functions

Here we discuss the atomic structure of amorphous ferromagnetic FeCoB alloys, which are used widely in spintronics applications. Specifically, we obtain the pair-distribution functions for various atomic pairs based on high-energy x-ray diffraction data taken from an amorphous Co 20 Fe 61 B 19 specimen. We start our reverse Monte Carlo cycles to determine the disordered structure with a two-phase model in which a small amount of cobalt is mixed with Fe 23 B 6 as a second phase. The structure of the alloy is found to be heterogeneous, where the boron atoms drive disorder through the random occupation of the atomic network. Our analysis also indicates the presence of small cobalt clusters that are embedded in the iron matrix and percolating the latter throughout the structure. This morphology can explain the enhanced spin polarization observed in amorphous magnetic materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2011

Ancilla-assisted sequential approximation of nonlocal unitary operations

We consider the recently proposed (no-go) theorem of Lamata et al.[Phys. Rev. Lett. 101, 180506 (2008)] on the impossibility of sequential implementation of global unitary operations with the aid of an itinerant ancillary system and view the claim within the language of Kraus representation. By virtue of an extremely useful tool for analyzing entanglement properties of quantum operations, namely, operator-Schmidt decomposition, we provide alternative proof to the no-go theorem and also study the role of initial correlations between the qubits and ancilla in sequential preparation of unitary entanglers. Despite the negative response from the no-go theorem, we demonstrate explicitly how the matrix-product operator (MPO) formalism provides a flexible structure to develop protocols for sequential implementation of such entanglers with an optimal fidelity. The proposed numerical technique, which we call variational matrix-product operator (VMPO), offers a computationally efficient tool for characterizing the ''globalness'' and entangling capabilities of nonlocal unitary operations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1992

Space environmental effects on LDEF low Earth orbit exposed graphite reinforced polymer matrix composites

The Long Duration Exposure Facility (LDEF) was deployed on April 7, 1984 in low earth orbit (LEO) at an altitude of 482 kilometers. On board experiments experienced the harsh LEO environment including atomic oxygen (AO), ultraviolet radiation (UV), and thermal cycling. During the 5.8 year mission, the LDEF orbit decayed to 340 kilometers where significantly higher AO concentrations exist. LDEF was retrieved on January 12, 1990 from this orbit. One experiment on board LDEF was M0003, Space Effects on Spacecraft Materials. As a subset of M0003 nearly 500 samples of polymer, metal, and glass matrix composites were flown as the Advanced Composites Experiment M0003-10. The Advanced Composites Experiment is a joint effort between government and industry with the Aerospace Corporation serving as the experiment integrator. A portion of the graphite reinforced polymer matrix composites were furnished by the Boeing Defense and Space Group, Seattle, Washington. Test results and discussions for the Boeing portion of M0003-10 are presented. Experiment and specimen location on the LDEF are presented along with a quantitative summary of the pertinent exposure conditions. Matrix materials selected for the test were epoxy, polysulfone, and polyimide. These composite materials were selected due to their suitability for high performance structural capability in spacecraft applications. Graphite reinforced polymer matrix composites offer higher strength to weight ratios along with excellent dimensional stability. The Boeing space exposed and corresponding ground control composite specimens were subjected to post flight mechanical, chemical, and physical testing in order to determine any changes in critical properties and performance characteristics. Among the more significant findings are the erosive effect of atomic oxygen on leading edge exposed specimens and microcracking in non-unidirectionally reinforced flight specimens.

George, Pete↗
DOE OSTI2021

Forward and Off-Forward Parton Distributions from Lattice QCD

The interpretation of (semi-)inclusive and certain exclusive scattering processes relies on the factorization of hard parton level cross sections from long-range and non-perturbative parton correlations. The familiar Parton Distribution Functions (PDFs) and Generalized Parton Distributions quantify the non-perturbative dynamics in these situations and address a number of key questions surrounding the structure of hadrons. A certain class of matrix elements accessible in lattice QCD, so called Lattice Cross Sections, have been shown to factorize into these collinear distributions in a manner akin to the factorization of hadronic cross sections. In the short-distance regime, matrix elements of space-like separated two-current operators and parton bilinears can be expressed as the convolution of perturbative coefficient functions and the PDFs. Matrix elements of this type are isolated in the pion and nucleon, each offering a glimpse of the unpolarized valence quark content of these phenomenologically important hadronic states. The calculations within the nucleon represent the first application of the distillation spatial smearing paradigm to the collinear structure of hadrons, and is found to offer higher precision data compared to similar calculations in the literature. A novel method to obtain PDFs from these lattice data, while simultaneously controlling systematic effects, is developed and applied to the nucleon dataset. The coordinate space factorization of space-like separated parton bilinears has also recently been extended to include Generalized Parton Distributions. Preliminary results in off-forward nucleon matrix elements using distillation are explored.

Egerer, Colin↗
DOE OSTI2012

Structural algorithm to reservoir reconstruction using passive seismic data (synthetic example)

Using of passive seismic observations to detect a reservoir is a new direction of prospecting and exploration of hydrocarbons. In order to identify thin reservoir model we applied the modification of Gaussian elimination method in conditions of incomplete synthetic data. Because of the singularity of a matrix conventional method does not work. Therefore structural algorithm has been developed by analyzing the given model as a complex model. Numerical results demonstrate of its advantage compared with usual way of solution. We conclude that the gas reservoir is reconstructed by retrieving of the image of encasing shale beneath it.

58 GEOSCIENCES↗
DOE OSTI2026

3D printed water-stable Cd-doped Cs 4 MnBi 2 Cl 12 /polylactic acid perovskite/polymer composites for high-flux X-ray scintillation

Stable and efficient X-ray scintillators are crucial for medical diagnostics, industrial, and defense applications. However, conventional scintillator technologies face a trade-off between stability, optimal performance, and sustainability. Herein, we introduce 3D-printed Cs 4 MnBi 2 Cl 12 (Pero1) and Cs 4 Cd 0.68 Mn 0.32 Bi 2 Cl 12 (Pero2) perovskite microcrystals embedded within a polylactic acid (PLA) polymer composite as X-ray scintillators, combining efficiency, stability, and sustainability. The orange luminescent perovskite powder phosphors exhibited poor water stability, which was successfully addressed through incorporation into PLA via filament extrusion and fused deposition modeling (FDM) 3D printing. The resulting composite films demonstrated remarkable water stability while maintaining uniform orange emission throughout the polymer matrix, as confirmed by 3D topography scanning and X-ray fluorescence mapping. Structural characterization revealed minimal chemical interaction between the perovskite and PLA matrix, with the composites retaining their crystalline properties. The PLA-Pero2 composite exhibited superior optical properties, with a photoluminescence quantum yield of 47%, nearly 17 times higher than that of PLA-Pero1 (2.8%), attributed to the effective suppression of non-radiative decay pathways through Cd 2+ doping. Under hard X-ray irradiation at synchrotron beamlines, both composites exhibited excellent radioluminescence, with emission peaks at 605 nm, a linear response across a wide X-ray flux range, and remarkable radiation stability, showing less than 3% intensity degradation after 600 seconds of continuous high-dose exposure. The PLA-Pero2 composite achieved a spatial resolution of 5 line pairs per millimeter and a contrast ratio of 0.255. These performance metrics, combined with the polymer's biodegradability and scalability through additive manufacturing, position PLA-based composites as a more sustainable alternative to conventional petroleum-based polymer scintillators for next-generation medical imaging, radiation monitoring, and industrial radiography applications.

3D Printing↗
DOE OSTI2015

Orthorhombic YBaCo{sub 4}O{sub 8.4} crystals as a result of saturation of hexagonal YBaCo{sub 4}O{sub 7} crystals with oxygen

Hexagonal YBaCo{sub 4}O{sub 7} crystals (sp. gr. P6{sub 3}mc, a{sub h} = 6.3058(4) Å, c{sub h} = 10.2442(7) Å, Z = 2) are saturated with oxygen to the YBaCo{sub 4}O{sub 8.4} composition and studied by X-ray diffraction (XRD) analysis. The saturation is completed by a structural first-order phase transition to orthorhombic crystals (sp. gr. Pbc2{sub 1}, a{sub o} = 31.8419(2) Å, b{sub o} = 10.9239(5) Å, c{sub o} = 10.0960(5) Å, Z = 20). The connection of two lattices is expressed in terms of the action of matrix (500/120/001) on the hexagonal basis. Five structural fragments of the same type but with different degrees of order alternate along the long axis of the oxygen-saturated orthorhombic structure. The XRD data on single crystals differ from the results obtained by other researchers on ceramic samples; possible causes of these differences are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Alloys for inert matrix fuel compositions, and methods of making the same

In one embodiment, an alloy includes: Zr; Fe; Cu; Ta in an amount from about 1 wt % to about 3 wt %; and one or more optional constituents selected from: Ti, Be, and Nb; and wherein the alloy comprises a ductile phase and a nanoprecipitate hard phase. According to another embodiment, a method of forming an inert matrix nuclear fuel includes: packing a hollow structure with fuel pellets and alloy precursor pellets; heating the fuel pellets and the alloy precursor pellets to at least a melting temperature of an alloy to be formed by melting the alloy precursor pellets; and solidifying the alloy into a matrix surrounding the fuel pellets. The alloy precursor pellets independently comprise: Zr; Fe; Cu; Ta present in an amount from about 1 to about 3 wt %; and one or more optional alloy constituents selected from: Ti, Be, and Nb.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Structure–Thermodynamic Relationship of a Polysaccharide Gel (Alginate) as a Function of Water Content and Counterion Type (Na vs Ca)

Biofilms are the predominant mode of microbial life on Earth, and so a deep understanding of microbial communities-and their impacts on environmental processes-requires a firm understanding of biofilm properties. Because of the importance of biofilms to their microbial inhabitants, microbes have evolved different ways of engineering and reconfiguring the matrix of extracellular polymeric substances (EPS) that constitute the main non-living component of biofilms. This ability makes it difficult to distinguish between the biotic and abiotic origins of biofilm properties. An important route toward establishing this distinction has been the study of simplified models of the EPS matrix. This study builds on such efforts by using atomistic simulations to predict the nanoscale (≤10 nm scale) structure of a model EPS matrix and the sensitivity of this structure to interpolymer interactions and water content. To accomplish this, we use replica exchange molecular dynamics (REMD) simulations to generate all-atom configurations of ten 3.4 kDa alginate polymers at a range of water contents and Ca–Na ratios. Simulated systems are solvated with explicitly modeled water molecules, which allows us to capture the discrete structure of the hydrating water and to examine the thermodynamic stability of water in the gels as they are progressively dehydrated. Our primary findings are that (i) the structure of the hydrogels is highly sensitive to the identity of the charge-compensating cations, (ii) the thermodynamics of water within the gels (specific enthalpy and free energy) are, surprisingly, only weakly sensitive to cation identity, and (iii) predictions of the differential enthalpy and free energy of hydration include a short-ranged enthalpic term that promotes hydration and a longer-ranged (presumably entropic) term that promotes dehydration, where short and long ranges refer to distances shorter or longer than ~0.6 nm between alginate strands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2012

Molecular simulation as a tool for studying lignin

Lignocellulosic biomass provides a sustainable source of sugars for biofuel and biomaterial production. However, biomass resistance to degradation imposes difficulties for economical conversion of plant carbohydrates to fermentable sugars. One of the key contributors to recalcitrance is lignin. Understanding the properties of lignin macromolecules in the cell wall matrix is useful for manipulating biomass structure to generate more easily degradable biomass. Along with experimental techniques such as 2D-NMR and mass spectrometry, computational techniques can be useful for characterizing the structural and energetic properties of the biomass assembly and its individual constituents. Here, we provide a brief introduction to lignin, review some of the recent, relevant scientific literature, and give our perspectives on the role of molecular simulation in understanding lignin structure.

09 BIOMASS FUELS↗