Search NASA⌕ Search

SEARCH · Search NASA

Results for “method development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Estimation of micro-Hall-Petch coefficients for prismatic slip system in Mg-4Al as a function of grain boundary parameters

Grain size strengthening, referred to as the Hall-Petch effect, is a common strategy to improve the yield strength of magnesium (Mg) alloys. Several experimental studies have reported that the Hall-Petch slope strongly depends on the texture of the alloy. This effect arises from altering grain boundaries (GBs) resistance to different slip systems to transfer across adjacent grains. The grain boundary barrier strength of certain grain boundaries to basal slip, referred to as basal micro-Hall-Petch, was investigated in the previous work. Here in this study, the micro-Hall-Petch coefficient values for the prismatic slip $(k^{prismatic}_{μ})$ in Mg-4Al and their correlation with the grain boundary parameters were investigated. An experimental method was developed to initiate the prismatic slip band at low-stress levels. High-resolution electron backscatter diffraction (HR-EBSD) was used to measure the residual stress tensor, from which the resolved shear stress ahead of blocked prismatic slip bands was computed for seven different grain boundaries. $(k^{prismatic}_{μ})$ values for each individual GB were calculated by coupling the stress profile information with a continuum dislocation pile-up model. The $(k^{prismatic}_{μ})$ values vary from 0.138 MPa.m 1/2 to 0.685 MPa. m 1/2 which are almost three times larger than the calculated values for the basal micro-Hall-Petch. The $(k^{prismatic}_{μ})$ values were correlated with the GB parameters, and a functional relationship depending on the two most effective angles, the angle between the traces of the slip planes on the GB plane ($\phi$) and the angle between incoming and outgoing slip directions (κ), was proposed to estimate the Hall-Petch barrier for prismatic slip system. The work provides coefficients that can be supplied as input to crystal plasticity models to couple the effect of texture and grain size effectively.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Quasi-differential neutron induced neutron emissions from 235 U, and 239 Pu

Uncertainty in nuclear reaction cross sections, angular distributions, and other nuclear data directly impact how well simulations of nuclear systems represent physical observations. Here, to determine how well the nuclear data in ENDF/B-VIII.0, JEFF-3.3, and JENDL-4.0 evaluations describe the physical behaviour of 235 U, and 239 Pu when subjected to a neutron flux, the neutron emission spectrum was measured for carbon, 93.0% 235 U, and 93.9% 239 Pu samples, and compared against detailed MCNP6 simulations. The measurements were performed at the Los Alamos Neutron Science Center using a quasi-differential method previously developed at Rensselaer Polytechnic Institute. The measurement spanned 0.82–20 MeV and 30–150 degrees. The measurements show there are a significant number of discrepancies between library predictions of the neutron yield and physical observation. A few of the main discrepancies found are described in this paper. Based on these results a new evaluation utilizing these results for carbon, 235 U, and 239 Pu is recommended.

235U↗
DOE OSTI2023

Entanglement between valence and sea quarks in hadrons of 1+1 dimensional QCD

The conceptual interpretation of valence- and sea-quark separation, which is a key aspect of the parton model and of an intuitive picture of hadron structure, becomes obscured by quantum effects in QCD. This suggests that there may be measures of entanglement between quark degrees of freedom that are present in QCD, but absent in the intuitive picture with a clear valence-sea (VS) separation. In this paper, we define the first rigorous measure of VS entanglement in QCD in an attempt to bring conceptual clarity to this issue, and, potentially, to find a measure of the applicability of the parton model to QCD bound states. This VS entanglement vanishes in the large-N c limit, and it remains low when finite-N c states resemble their large-N c counterparts. We perform a numerical study of VS entanglement in 1 + 1 dimensional discrete light-cone quantized QCD, and in the process develop a method for building the color-singlet basis of 1 + 1d QCD that is manifestly complete and orthogonal by construction. We calculate this VS entanglement entropy for the first time and find that it is relatively low for the first few excited states of both mesons and baryons compared to all other states in the spectrum, with the VS entropy of ground state hadrons providing a minimum. We also see that for ground state mesons the entropy is well described in the 1/N c approximation. These results suggest that low energy hadrons may be the only QCD bound states for which the large-N c expansion, and perhaps the parton model, provide an accurate description. This work also provides the first evidence that the VS entanglement entropy of QCD in 3 + 1d, which would likely serve as an order parameter for the transition between quark and hadron degrees of freedom, may be perturbatively accessible through a large-N c expansion.

1+1 dimensional QCD↗
DOE OSTI2024

Evaluation of phase change thermal storage in a cascade heat pump

Here this study proposes a low-global warming potential cascade heat pump system with integrated phase change material (PCM) for combined space heating and cooling. PCM is embedded in the intermediate heat exchanger that couples an outdoor R290 refrigerant circuit and an indoor CO 2 circuit. We used a clustering method to develop seasonally representative load and ambient temperature profiles for residential buildings in Minneapolis, Minnesota. We simulated the system peak shaving performance on the selected representative days, assuming three different PCM options including ice (0 °C), tetradecane (5.6 °C), and a commercially available PCM, SP9 (10.5 °C). The baseline was the same cascade system without thermal storage. We investigated the effect of both thermal energy storage capacity (kWh th ) and PCM transition temperature on system performance. The results show that higher thermal energy storage capacity shaves more electric energy until it reaches a maximum value set by the load characteristics of the building. SP9, with the highest transition temperature, shaves the most electric energy, while ice shaves the least. Moreover, ice has the highest charging cost, especially in the cooling season when the outdoor circuit has to operate at an evaporating temperature lower than 0 °C to make ice. Our results show that SP9 presents the lowest levelized cost of storage, closely followed by ice. A lower off-peak electricity rate benefits ice more than SP9 or tetradecane because ice has the largest charging cost penalty.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Defect and satellite characteristics of additive manufacturing metal powders

Metal additive manufacturing (AM) requires high-quality metal powders to three-dimensionally (3D) print metallic components with complex and customizable geometries. The lack of quantification of AM metal powders creates quality control challenges for 3D printed components, increases the uncertainty of printing reliability and net cost of inspected and certified printed components, and reduces the recyclability of used powders. However, critical characteristics of AM metal powders that are decisive factors for the 3D printing process, such as internal porosity, contamination, and satellite feature, remain ambiguous. In this work, we developed a novel approach to 3D quantify key characteristics of AM metal powders down to individual particles by using high-resolution synchrotron x-ray computed tomography. Empowered by the penetrative capability of high-energy x-ray, internal porosity and contamination within as-atomized metal powders from high-entropy alloys to nickel-based superalloys were evaluated. Additionally, the newly-developed dispersion method enables the homogeneous separation of individual particles, and consequently, results in the implementation of 3D particle shape analysis. To resolve a major challenge of identification and quantification of satellite-feature particles in as-atomized AM metal powders, the satellite features were quantitated by modeling and analyzing the shape parameter of local thickness variance. Furthermore, the 3D analytical methods of particle assessment in this study can be applied to other materials systems like rock, food, and pharmaceutical particles, and provide insights for process optimization across powder metallurgy, concrete, food and pharmaceutical manufacturing, and AM industries.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Pragmatic protocols for working cleanly when measuring ice nucleating particles

We report that measuring ice nucleating particles (INPs) is critical for understanding, and modeling, cloud formation, reflectivity, and precipitation patterns. However, because INPs are very rare in the atmosphere, but abundant—sometimes alarmingly so—in the dust that covers all work surfaces, contamination during processing of collected aerosol samples can be a significant hindrance to obtaining accurate measures of INPs. In preparing this technical note, we questioned the cleanliness of every collection and processing step involved in making immersion freezing measurements of INPs re-suspended from filter samples. The aim was to identify, and then minimize, all potential sources of significant contamination, including containers and tools used to store filters and prepare liquid suspensions, gloves, work surfaces, and the polymerase chain reaction (PCR) trays commonly used for sample analysis. While plasticware released few INPs, most gloves readily shed them, but this can be mitigated by using washed cleanroom vinyl or polyethylene gloves. Work surfaces, even those that had been cleaned, were prodigious reservoirs of contaminating INPs, but simply covering them with aluminum foil will provide an INP-free surface. By applying these practices, we developed a method to reduce the background level of INPs on Nuclepore™ polycarbonate filters in our tests to 0 at -25 °C and < 20 at -27 °C, making them suitable for use in all sampling environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

ARPIST: Provably accurate and stable numerical integration over spherical triangles

Numerical integration on spherical triangles, including the computation of their areas, is a core computation in geomathematics. The commonly used techniques sometimes suffer from instabilities and significant loss of accuracy. We describe a new algorithm, called ARPIST, for accurate and stable integration of functions on spherical triangles. ARPIST is based on an easy-to-implement transformation to the spherical triangle from its corresponding linear triangle via radial projection to achieve high accuracy and efficiency. More importantly, ARPIST overcomes potential instabilities in computing the Jacobian of the transformation, even for poorly shaped triangles that may occur at poles in regular longitude-latitude meshes, by avoiding potential catastrophic rounding errors. We compare our proposed technique with L’Huilier’s Theorem for computing the area of spherical triangles, and also compare it with the recently developed LSQST method (Beckmann et al., 2014) and a radial-basis-function-based technique (Reeger and Fornberg, 2016) for integration of smooth functions on spherical triangulations. In conclusion, our results show that ARPIST enables better or comparable accuracy over previous methods while being easier to implement, significantly faster, and more tolerant of poor element shapes.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Li 7 P 3 S 11 electrolyte for all-solid-state lithium-ion batteries: structure, synthesis, and applications

Because of a high ion conductivity (10 -2 S cm -1 ) comparable with liquid electrolytes at room temperature, Li 7 P 3 S 11 , one of the most important solid state electrolytes (SSEs), has attracted significant attention for applications in all-solid-state lithium batteries (ASSLBs). The development of Li 7 P 3 S 11 has progressed impressively in recent years. A fundamental understanding of Li 7 P 3 S 11 SSE from its crystal structure and ion conductivity to practical applications is critical for the development of Li 7 P 3 S 11 SSE based ASSLBs. In light of that, this review presents an overview of the Li 7 P 3 S 11 SSE. Herein, the review addresses 1) the crystal structure and Li + diffusion mechanism; 2) developed synthesis methods and corresponding crystal growth mechanisms; 3) challenges and strategies of Li 7 P 3 S 11 SSE in practical applications. Finally, remaining challenges and future perspectives are highlighted.

25 ENERGY STORAGE↗
DOE OSTI2025

Scaled-up fabrication of durable and porous adsorbent-coated minichannels on aluminum for CO 2 separation

A method was developed to fabricate zeolite 13X adsorbent-coated minichannels on aluminum for CO₂ adsorption applications in this study. It emphasizes the innovative use of aluminum as a substrate, which offers airtight assembly, paving the way for highly efficient adsorption systems. An optimized coating process was developed using a slurry of Zeolite 13X, yeast, sugar, and xanthan gum, resulting in durable and highly porous layers that enhance CO₂ capture performance. A PETG peeler was designed to remove the top layer of the yeast-engineered adsorbent coatings, revealing a super porous and foamy structure. The teeth of the peeler were designed and fabricated for high repeatability and rapid prototyping. Breakthrough experiments were conducted on the scaled-up adsorbent bed using gas mixtures of 80% CO₂, 20% N₂, and 20% CO₂, 80% N₂ to represent different industrial scenarios. The performance of the bed was evaluated at flow rates of 160 and 190 cm³ min -1 using a Raman Laser Gas Analyzer (RLGA), demonstrating stable adsorption without degradation across multiple cycles. Computational modeling of integral transport phenomena under the chosen experimental conditions was pursued using gPROMS ProcessBuilder™, and the modeling results were compared with those from the tests for adsorption time, which resulted in an error margin of 2% to 9% for the breakthrough time, confirming the easy reproducibility of the design through modeling. This research advances CO₂ capture technologies by providing an effective and scalable solution for producing aluminum-based adsorbent coated beds, supporting industrial carbon capture efforts.

CO2 capture↗
DOE OSTI2021

Effect of plasticity on the experimental characterization of the creep property of a cement paste: Spherical vs. conical microindentation

Microindentation is today a powerful tool for rapidly characterizing the elastic modulus and the logarithmic basic creep of a cement paste. However, a theoretical work proved that a microindentation test with a sharp indenter shape involves stress concentration and delayed plasticity which can cause an overestimation of the estimated creep property. This work aims at experimentally investigating the effect of the shape indenter on the identification of the visco-elastic property of a cement paste by microindentation. First, several microindentation grids were carried out on a cement paste with both a Berkovich indenter and a spherical indenter at different penetration depths or load levels for load control (creep) tests or displacement control (relaxation) tests, respectively. As for a visco-elastic material the duality principle between creep and relaxation holds, a numerical method was developed for predicting the relaxation response from the assumed logarithmic creep compliance. The present results show that only spherical microindentation satisfy the duality principle for which creep and relaxation response can be predicted by a unique logarithmic creep compliance function. Finally, spherical microindentation creep tests at low load as well as spherical microindentation relaxation tests provide a greater indentation modulus M and contact creep modulus C{sub v} as likely less affected by possible plasticity effects.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A reduced-order shifted boundary method for parametrized incompressible Navier–Stokes equations

Here, we investigate a projection-based reduced order model of the steady incompressible Navier–Stokes equations for moderate Reynolds numbers. In particular, we construct an “embedded” reduced basis space, by applying proper orthogonal decomposition to the Shifted Boundary Method, a high-fidelity embedded method recently developed. We focus on the geometrical parametrization through level-set geometries, using a fixed Cartesian background geometry and the associated mesh. This approach avoids both remeshing and the development of a reference domain formulation, as typically done in fitted mesh finite element formulations. Two-dimensional computational examples for one and three parameter dimensions are presented to validate the convergence and the efficacy of the proposed approach.

"embedded" basis↗
DOE OSTI2021

Probabilistic learning on manifolds constrained by nonlinear partial differential equations for small datasets

A novel extension of the Probabilistic Learning on Manifolds (PLoM) is presented. It makes it possible to synthesize solutions to a wide range of nonlinear stochastic boundary value problems described by partial differential equations (PDEs) for which a stochastic computational model (SCM) is available and which depend on a vector-valued random control parameter. The cost of a single numerical evaluation of this SCM is assumed to be such that only a limited number of points can be computed for constructing the training dataset (small data). Each point of the training dataset is made up of realizations from a vector-valued stochastic process (the stochastic solution) and the associated random control parameter on which it depends. The presented PLoM constrained by PDE allows for generating a large number of learned realizations of the stochastic process and its corresponding random control parameter. These learned realizations are generated so as to minimize the vector-valued random residual of the PDE in the mean-square sense. Appropriate novel methods are developed to solve this challenging problem. Three applications are presented. The first one is a simple uncertain nonlinear dynamical system with a nonstationary stochastic excitation. The second one concerns the 2D nonlinear unsteady Navier–Stokes equations for incompressible flows in which the Reynolds number is the random control parameter. Here, the last one deals with the nonlinear dynamics of a 3D elastic structure with uncertainties. The results obtained make it possible to validate the PLoM constrained by stochastic PDE but also provide further validation of the PLoM without constraint.

Machine learning↗
DOE OSTI2022

A machine-learning framework for the simulation of nuclear deflection of Planet-Killer-Asteroids

Here, as detection capabilities in astronomy have dramatically improved over the last two decades, concerns over Planet-Killer-Asteroids (PKAs) have become widespread, with nuclear weapons being proposed to destroy or deflect asteroids that are on a short-term projected collision course with Earth. Two main mitigation strategies have been proposed: • Case 1: Break up an incoming asteroid into smaller pieces that will disperse widely, resulting in smaller-scale, less detrimental, Earth-impacts or • Case 2: Deflect an incoming asteroid trajectory to avoid collision altogether. While the two strategies are not mutually exclusive, deflection is a safer strategy, ideally by harnessing all of the released energy from a nuclear device to move the asteroid as a rigid body. However, this case may not be always possible, since the strength of the energy release may break up the asteroid. In this work, the dynamical response of a PKA to a series of ultra-high energy impulses, such as those generated by nuclear devices, is formulated. A rapid iterative Discrete Element Method (DEM) method is developed to describe the deflection and potential breakup of the PKA as a function of a material bonding strength parameter within the asteroid and the magnitude of the applied impulse. The use of DEM allows for fragmentation of the PKA and the ability to compute the trajectories and distribution of the resulting debris field. Finally, a machine-learning algorithm is then developed and combined with the DEM approach to optimize the pulsation strategy for maximum possible safety and success.

42 ENGINEERING↗
DOE OSTI2025

A Computational Framework to design 3D stiffness gradient acoustic metamaterials for impedance matching

Acoustic waves play a crucial role in various applications, including medical imaging, non-destructive testing, and sonar systems. One of the significant challenges in these applications is impedance matching, which is essential for minimizing reflections and maximizing the transfer of acoustic energy between different media. Acoustic metamaterials offer a promising solution to this challenge. In addition to impedance control, gradient stiffness can enhance structural efficiency and enable spatial control of wave propagation, making it a valuable feature in acoustic metamaterial design. In this pa- per, we present our developed computational method to design 3D stiffness gradient acoustic metamaterials for impedance matching. The key steps in our approach include generating initial designs using a periodic covariance function to provide unit cells that are both periodic on the boundaries and randomly formed inside the unit cell. Furthermore, we integrated manufacturing constraints into the design process, ensuring that the structures are interconnected for fabrication. We propose two computational optimization algorithms: GenUnit, based on a non-dominated sorting genetic algorithm (NSGA-II), and MLMatch, which leverages differentiable machine learning. The two approaches are not separate contributions but complementary com- ponents of a unified framework. GenUnit requires no training data and directly interfaces with physics-based simulations, making it highly accurate but slower for large-scale exploration. In contrast, MLMatch is data-hungry during training but, once trained, enables near-instantaneous inference and broad design-space coverage. Together, they form a hybrid strategy: ML- Match rapidly explores the global design space, and GenUnit provides local refinement with high-fidelity accuracy. This balance between training cost, inference time, and precision is the motivation for including both methods in the same study. We applied this dual-algorithm framework to generate two metallic-based metamaterial designs that match the acoustic impedance of water while exhibiting a controlled gradient in stiffness (from stiff to soft). The stiffness gradient is particularly advantageous in applications where one side of the structure must interface with soft or sensitive surfaces, such as human tissue or delicate components. Here, this work paves the way for improved materials in various acoustic applications, particularly in ultrasound devices, by providing better impedance.

Metamaterial↗
DOE OSTI2019

Modeling assessment of storm surge in the Salish Sea

Here we present a modeling assessment of storm surge in the Salish Sea—a large and complex estuarine system in the Pacific Northwest that is exposed to extratropical cyclones. A method was developed to systematically identify storm surge events in the Salish Sea based on water level records at four representative tidal gauges in the Salish Sea. The maximum storm surge distribution in the Salish Sea was calculated based on model simulations of 34 major historical storm events from 1980 to 2016. The model simulations were validated by field observations of water level and velocity using a suite of model performance metrics. Model results suggest that the maximum storm surge in the Salish Sea is generally in the range of 0.8 m–1.03 m and is heterogeneous in space. The model results also show a strong north-south gradient with larger surge magnitudes occurring in the north that is primarily caused by the southerly wind in winter months. The sensitivity analysis of wind forcing suggested that storm surge in the Salish Sea is dominated by the remote surge from the Pacific Ocean, and the local wind contributes up to approximately 20% of the surge variability. This paper systematically elucidates storm surge characteristics and potential risk in the Salish Sea.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Quantitative assessment of environmental phenomena on maximum pit size predictions in marine environments

Maximum pit sizes were predicted for dilute and concentrated NaCl and MgCl 2 solutions as well as sea-salt brine solutions corresponding to 40% relative humidity (RH) (MgCl 2 -rich) and 76% RH (NaCl-rich) at 25 °C. A quantitative method was developed to capture the effects of various cathode evolution phenomena including precipitation and dehydration reactions. Additionally, the sensitivity of the model to input parameters was explored. Despite one's intuition, the highest chloride concentration (roughly 10.3 M Cl – ) did not produce the largest predicted pit size as the ohmic drop was more severe in concentrated MgCl 2 solutions. Therefore, the largest predicted pits were calculated for saturated NaCl (roughly 5 M Cl – ). Next, it was determined that pit size predictions are most sensitive to model input parameters for concentrated brines. However, when the effects of cathodic reactions on brine chemistry are considered, the sensitivity to input parameters is decreased. Although there was not one main input parameter that influenced pit size predictions, two main categories were identified. Under similar chloride concentrations (similar RH), the water layer thickness (WL), and pit stability product, (i · x) sf , are the most influential factors. When varying chloride concentrations (RH), changes in WL, the brine specific cathodic kinetics on the external surface (captured in the equivalent current density (i eq )), and conductivity (k o ) are the most influential parameters. Finally, it was noted that dehydration reactions coupled with precipitation in the cathode will have the largest effect on predicted pit size, and cause the most significant inhibition of corrosion damage.

54 ENVIRONMENTAL SCIENCES↗