Search NASA⌕ Search

SEARCH · Search NASA

Results for “performance data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Filtration Performance of Simulated 200 West Area Waste Feeds

This report describes the scaled experimental system and approach used to examine dead-end filtration performance of representative 200W waste feeds. The scaled system, which was originally designed and assembled to test Tank Side Cesium Removal (TSCR) system performance with higher-than-expected solid loadings in 2021 (Schonewill et al. 2021), was repurposed to conduct the current experiments at ~1/145 of full scale (based on throughput). Six experimental runs were conducted with five different 200W waste feed simulants: three using a DEF module scaled for TSCR and three using a DEF module scaled for the 200W process modules (based on the current design for the Advanced Modular Pretreatment System). Each experiment was run continuously for multiple days with an operating approach prototypic of the full-scale system. Staff performing the experimental runs monitored performance, obtained data from calibrated process instruments, and collected samples for observation and analysis. The measured data are presented with a focus on assessing DEF performance – specifically, the filters’ differential pressure response to the five waste simulants, frequency and efficacy of backwashing, and baseline recovery between experimental runs; data related to ion exchange column performance are also discussed in cases where the opportunity arose. The experimental campaign demonstrated that the DEFs satisfied their primary function of protecting the ion exchange column from solid intrusion for all the representative simulants used. The filters readily handled solids loadings of =500 ppm (and even greater), especially the modules scaled to the 200W process modules. Adjustments to the processing flow rate and reductions in feed temperature were observed to affect the rate of differential pressure increase on the filters, but neither adversely affected the ability of the DEFs to perform their primary function. Backflushing reliably recovered filter performance in all runs, although it did not prevent irreversible fouling for one simulant. The run that exhibited irreversible fouling established that both the quantity and the nature of the solids being filtered need to be considered when projecting filter performance.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Testing Lorentz Invariance and CPT Conservation with NuMI Neutrinos in the MINOS Near Detector

A search for a sidereal modulation in the MINOS near detector neutrino data was performed. If present, this signature could be a consequence of Lorentz and CPT violation as predicted by the effective field theory called the standard-model extension. No evidence for a sidereal signal in the data set was found, implying that there is no significant change in neutrino propagation that depends on the direction of the neutrino beam in a sun-centered inertial frame. Upper limits on the magnitudes of the Lorentz and CPT violating terms in the standard-model extension lie between 10{sup -4} and 10{sup -2} of the maximum expected, assuming a suppression of these signatures by a factor of 10{sup -17}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Simultaneous X-ray diffraction and phase-contrast imaging for investigating material deformation mechanisms during high-rate loading

Using a high-speed camera and an intensified charge-coupled device (ICCD), a simultaneous X-ray imaging and diffraction technique has been developed for studying dynamic material behaviors during high-rate tensile loading. A Kolsky tension bar has been used to pull samples at 1000 s -1 and 5000 s -1 strain-rates for super-elastic equiatomic NiTi and 1100-O series aluminium, respectively. By altering the ICCD gating time, temporal resolutions of 100 ps and 3.37 µs have been achieved in capturing the diffraction patterns of interest, thus equating to single-pulse and 22-pulse X-ray exposure. Furthermore, the sample through-thickness deformation process has been simultaneously imaged via phase-contrast imaging. It is also shown that adequate signal-to-noise ratios are achieved for the detected white-beam diffraction patterns, thereby allowing sufficient information to perform quantitative data analysis diffraction via in-house software ( WBXRD_GUI ). Of current interest is the ability to evaluate crystal d -spacing, texture evolution and material phase transitions, all of which will be established from experiments performed at the aforementioned elevated strain-rates.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modeling, Performance Assessment, and Nodal Data Analysis of TRISO-Fueled Systems with Shift

This technical report documents several enhancements to the Shift Monte Carlo (MC) code under the US Department of Energy (DOE) Nuclear Energy Advanced Modeling and Simulation (NEAMS) program in fiscal year (FY) 2022. Performance enhancements were added to Shift specifically for tristructural isotropic (TRISO)–fueled reactor systems and guided based on performance analysis in FY 2021. For the pebble performance model developed in previous studies, the runtime improved by ~ 91× compared to the original model and ~ 2× compared to the user-optimized model. Compared to Serpent, Shift is ~ 3× slower if Serpent delta-tracking is enabled but ~ 2× faster when delta-tracking is disabled. The multigroup cross section generation was improved through simplifying tally input definitions, porting several post-processing tally operations from Python scripts into the Shift code base, and accounting for production reactions in the scattering multiplicity. Progress was also made on two emerging capabilities: (1) the development of Titan (a Shift reactor physics user interface) and (2) initial investigation into path-length tallies for computing multigroup scattering matrices.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Dynamic Modeling for the Separation of Rare Earth Elements Using Solvent Extraction: Predicting Separation Performance Using Laboratory Equilibrium Data

Industrial rare earth element (REE) separation facilities utilize acidic cation exchange ligands such as 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (PC88A) for solvent extraction processes. REE separations are costly and difficult due to their chemical similarities and subsequent low separation factors. Several empirical correlations are available in the literature to predict steady state extraction equilibria for various solvent systems. However, complete solvent extraction flowsheet design for REE separations requires complex scrubbing and stripping circuits to separate and produce individual pure species. Furthermore, the sensitive process chemistry is susceptible to process upsets and may manifest as irreversible transients that complicate startup and continuous operation of a solvent extraction plant. Thus, dynamic modeling of REE separations will aid in process design, optimization, and management of process fluctuations. A time-dependent MATLAB/SIMULINK modeling framework has been developed for REE solvent extraction processes using laboratory equilibrium data. The model was used to develop a flowsheet that produced high purity neodymium from a 25 wt% praseodymium and 75 wt% neodymium feed. Laboratory mixer-settlers were used to verify and validate model performance. Results indicated that the model reasonably predicts the dynamic behavior of a counter-current REE separation process, and accurately predicts the steady state REE concentration profiles across the cascade. The modeling framework can be applied to any REE separation or solvent system provided adequate laboratory equilibrium data are available.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ARIADNE

The code ARIADNE performs uncertainty quantification of experimental data for nuclear data. It also performs nuclear data evaluations with the algorithm generalized squares.

Neudecker, Denise↗

Fission Product Yield Data Adjustment in a Prototype Version of TSURFER

The TSURFER (Tool for Sensitivity/Uncertainty analysis of Response Functionals using Experimental Results) module of Oak Ridge National Laboratory’s (ORNL’s) SCALE code system has been updated to perform nuclear data adjustments for fixed-source irradiation/depletion problems. TSURFER uses a generalized linear least squares (GLLS) approach to consolidate a prior set of measured responses and corresponding calculated values to create the most self-consistent set of nuclear data. Traditionally, TSURFER adjustments have been performed for multigroup nuclear data such as reaction cross sections. In this work, TSURFER is expanded to perform adjustments to independent fission product yields and branching ratios that need equality constraints. To preserve equality constraints after the data adjustment procedure, an updated GLLS formulation includes a new Lagrange multiplier that forces data adjustment to sum to 0 for a given fission yield/branching ratio parent. A test problem illustrates that the newly updated TSURFER module satisfies the required constraint that adjustments for fission yield data sum to 0.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Mining Behavior Based Safety Data to Predict Safety Performance

The Idaho National Laboratory (INL) operates a behavior based safety program called Safety Observations Achieve Results (SOAR). This peer-to-peer observation program encourages employees to perform in-field observations of each other's work practices and habits (i.e., behaviors). The underlying premise of conducting these observations is that more serious accidents are prevented from occurring because lower level “at risk” behaviors are identified and corrected before they can propagate into culturally accepted “unsafe” behaviors that result in injuries or fatalities. Although the approach increases employee involvement in safety, the premise of the program has not been subject to sufficient empirical evaluation. The INL now has a significant amount of SOAR data on these lower level “at risk” behaviors. This paper describes the use of data mining techniques to analyze these data to determine whether they can predict if and when a more serious accident will occur.

99 GENERAL AND MISCELLANEOUS↗

PTT System Design and Data Analysis for Improved Performance: Pulsed Thermal Tomography Nondestructive Examination of Additively Manufactured Reactor Materials and Components

Additive manufacturing (AM, or 3D printing) for commercial nuclear energy applications is an emerging method for cost-efficient manufacturing aimed at replacing aging nuclear reactor parts and reducing costs for new construction. Because of the geometry of metallic structures of interest for nuclear applications, which consist of planar primitives with no symmetry of revolution, limited options are available for non-destructive evaluation (NDE) either during or post manufacturing. Known material flaws in AM include low density regions consisting of non-sintered powder, which have to be detected to ensure the safety of long-term performance nuclear reactor components. As a solution to NDE of AM, we are developing pulsed thermal tomography (PTT) models and depth inversion algorithms for 3D imaging. PTT has many advantages because the method is non-contact and allows for in-service, NDE of AM nuclear reactor parts. By analyzing transients of surface temperature response due to internal thermal resistances, one can obtain 3D reconstructions of material effusively using a unique inversion algorithm developed at Argonne. This study investigates the limits of PTT capability in detection of defects in metallic plates using COMSOL numerical modeling of heat transfer. Defects are modeled as cylindrical flat bottom holes (FBH), which is a common model of calibrated material flaws in thermal tomography experiments. Materials considered in this study include stainless steel 316 (SS316), stainless steel 304 (SS304), and Inconel 718. Theoretical analyses were conducted to validate inversion of simulated PTT data with COMSOL for a plate. Subsequently, 3D reconstructions were performed on COMSOL simulations for FBH, revealing a decrease in spatial resolution over depth due to thermal diffusion. The results of this study show that the performance of the inversion algorithm for detecting smaller defects depends strongly on the depth of the defect as well as the incident heat flux. The size of detectable defect was estimated by fitting a Gaussian function to surface temperature profile. The criteria for detectability was taken as 20mK noise equivalent temperature difference (NETD), which is currently the sensitivity limit of high-performance infrared cameras. It was determined through computer simulations that the smallest detectable FBH in SS316 has a 50µm diameter and is located 0.5mm below the plate surface.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Identification of low-momentum muons in the CMS detector using multivariate techniques in proton-proton collisions at $\sqrt{s}$ = 13.6 TeV

“Soft” muons with a transverse momentum below 10 GeV are featured in many processes studied by the CMS experiment, such as decays of heavy-flavor hadrons or rare tau lepton decays. Maximizing the selection efficiency for these muons, while simultaneously suppressing backgrounds from long-lived light-flavor hadron decays, is therefore important for the success of the CMS physics program. Multivariate techniques have been shown to deliver better muon identification performance than traditional selection techniques. To take full advantage of the large data set currently being collected during Run 3 of the CERN LHC, a new multivariate classifier based on a gradient-boosted decision tree has been developed. It offers a significantly improved separation of signal and background muons compared to a similar classifier used for the analysis of the Run 2 data. The performance of the new classifier is evaluated on a data set collected with the CMS detector in 2022 and 2023, corresponding to an integrated luminosity of 62 fb -1 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Performance Prediction and Validation: Data, Frameworks, and Considerations

Improving the predictability and reliability of wind power generation and operations will reduce costs and potentially establish a framework to attract new capital into the distributed wind sector, a key cost reduction requirement highlighted in results from the distributed wind future market assessment conducted with dWind. Quantifying and refining the accuracy of project performance estimates will also directly address several of the key challenges identified by industry stakeholders in 2015 as part of the distributed wind resource assessment workshop and be cross-cutting for several other facets of the distributed wind portfolio. This presentation covers the efforts undertaken in 2016 to address these topics.

17 WIND ENERGY↗

MEUMAPPS (C++ Version)

Many materials, metal alloys in particular, have features on the on micrometer or nanometer scale that have a large impact on the properties of the material. These features are known as the microstructure of the material. Understanding why and how the microstructure forms in a material is of fundamental scientific interest as well as of significant technological interest. The capability to predict microstructure evolution in a material allows the intentional design of microstructures and hence the intentional design of material properties. The phase-field method is one of the leading methods for predicting microstructure evolution. One of the most significant problems for phase-field models is their computational expense. Even limited phase-field simulations can easily require thousands of CPU core-hours to complete, which significantly limits their use. This code provides both a general framework for creating scalable, GPU-accelerated phase-field model applications as well as several applications themselves. The code is capable of using hundreds of GPUs efficiently, which greatly reduces the time required to perform simulations. The code is written with an emphasis on performance portability, that is the ability for the code to run efficiently on a number of different computing architectures without modification of the source code. The performance portability of this code is primarily enabled through the use of two libraries, Kokkos (performance portable data structures and execution patterns) and heFFTe (performance portable distributed 3D fast Fourier transforms). The code consists of a core library, applications, and tests. The core library includes shared functionality between applications. This includes interfaces with fast Fourier transform (FFT) libraries such as heFFTe, data structures based on Kokkos, file input and output capabilities, and a solver for infinitesimal strain mechanical equilibrium problems. Five applications are included in the code. The flagship application is the MEUMAPPS-SS application, which implements the Kim-Kim-Suzuki phase-field model for precipitation for an arbitrary number of phases and components in a metal alloy. Five simpler applications are also included that solve the Eshelby inclusion problem, Allen-Cahn equation, the coupled Allen-Cahn and diffusion equations, and the Cahn-Hilliard equation. The code includes two applications to solve the Cahn-Hilliard equation, one with constant-step-size first-order time integration and the second with adaptive high-order time integration.

DeWitt, Stephen [Oak Ridge National Lab. (ORNL), O↗

The Modern Research Data Portal: A Design Pattern for Networked, Data-Intensive Science

Here we describe best practices for providing convenient, high-speed, secure access to large data via research data portals. We capture these best practices in a new design pattern, the Modern Research Data Portal, that disaggregates the traditional monolithic web-based data portal to achieve orders-of-magnitude increases in data transfer performance, support new deployment architectures that decouple control logic from data storage, and reduce development and operations costs. We introduce the design pattern; explain how it leverages high-performance Science DMZs and cloud-based data management services; review representative examples at research laboratories and universities, including both experimental facilities and supercomputer sites; describe how to leverage Python APIs for authentication, authorization, data transfer, and data sharing; and use coding examples to demonstrate how these APIs can be used to implement a range of research data portal capabilities. Sample code at a companion web site, https://docs.globus.org/mrdp, provides application skeletons that readers can adapt to realize their own research data portals.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

ATLAS muon data quality with 2010 LHC

ATLAS is a large multipurpose detector, presently in the full operational phase at LHC, the CERN Large Hadron Collider accelerator. The ATLAS Muon Spectrometer has been designed to provide standalone measurement of the muon momentum up to a few TeV with a relative precision better that 10% and to trigger on single muons with transverse momentum down to a few GeV, and an efficiency close to 100%, taking into account the high level background environment, the inhomogeneous magnetic field, and the large size of the apparatus (24 m diameter by 44 m length). ATLAS MS detector has being commissioned using all types of physics data available: cosmic rays and events produced during a few days of LHC single beam operations. This first year of data taking has been of great interest, not only for the physics outcome, but also for operating the system under the environment it was designed for. This paper is describing the design, the implementation as well as the data quality performance achieved during this first year of data taking. We also describe how to reduce the cosmic background contamination in early collisions data. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Active non-volatile memory post-processing

A computing node includes an active Non-Volatile Random Access Memory (NVRAM) component which includes memory and a sub-processor component. The memory is to store data chunks received from a processor core, the data chunks comprising metadata indicating a type of post-processing to be performed on data within the data chunks. The sub-processor component is to perform post-processing of said data chunks based on said metadata.

97 MATHEMATICS AND COMPUTING↗

Parallel membership queries on very large scientific data sets using bitmap indexes

© 2019 John Wiley & Sons, Ltd. Many scientific applications produce very large amounts of data as advances in hardware fuel computing and experimental facilities. Managing and analyzing massive quantities of scientific data is challenging as data are often stored in specific formatted files, such as HDF5 and NetCDF, which do not offer appropriate search capabilities. In this research, we investigated a special class of search capability, called membership query, to identify whether queried elements of a set are members of an attribute. Attributes that naturally have classification values appear frequently in scientific domains such as category and object type as well as in daily life such as zip code and occupation. Because classification attribute values are discrete and require random data access, performing a membership query on a large scientific data set creates challenges. We applied bitmap indexing and parallelization to membership queries to overcome these challenges. Bitmap indexing provides high performance not only for low cardinality attributes but also for high cardinality attributes, such as floating-point variables, electric charge, or momentum in a particle physics data set, due to compression algorithms such as Word-Aligned Hybrid. We conducted experiments, in a highly parallelized environment, on data obtained from a particle accelerator model and a synthetic data set.

Yildiz, Beytullah↗

Deffe: A Data-efficient Framework for Performance Characterization in Domain-Specific Computing

Predicting workload performance is a crucial task for many architecture and system research. In this paper we present De￿e, a framework to estimate the workload performances under varying architectural configurations. The infrastructure component of Deffe is based on scalable and easy-to-use open-source software components. By casting the performance modeling as transfer learning tasks, the modeling component of Deffe can leverage the learned knowledge on one workload, and “transfer” it to a new workload. Extensive experimental results show that the method can achieve superior testing accuracy with an effective reduction of 32-80x in terms of the amount of required training data.

Liu, Frank↗