Search NASA⌕ Search

SEARCH · Search NASA

Results for “process control and optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

MO-FG-CAMPUS-TeP2-05: Optimizing Stereotactic Radiosurgery Treatment of Multiple Brain Metastasis Lesions with Individualized Rotational Arc Trajectories

Purpose: Radiosurgery of multiple (n>4) brain metastasis lesions requires 3–4 noncoplanar VMAT arcs with excessively high monitor units and long delivery time. We investigated whether an improved optimization technique would decrease the needed arc numbers and increase the delivery efficiency, while improving or maintaining the plan quality. Methods: The proposed 4pi arc space optimization algorithm consists of two steps: automatic couch angle selection followed by aperture generation for each arc with optimized control points distribution. We use a greedy algorithm to select the couch angles. Starting from a single coplanar arc plan we search through the candidate noncoplanar arcs to pick a single noncoplanar arc that will bring the best plan quality when added into the existing treatment plan. Each time, only one additional noncoplanar arc is considered making the calculation time tractable. This process repeats itself until desired number of arc is reached. The technique is first evaluated in coplanar arc delivery scheme with testing cases and then applied to noncoplanar treatments of a case with 12 brain metastasis lesions. Results: Clinically acceptable plans are created within minutes. For the coplanar testing cases the algorithm yields singlearc plans with better dose distributions than that of two-arc VMAT, simultaneously with a 12–17% reduction in the delivery time and a 14–21% reduction in MUs. For the treatment of 12 brain mets while Paddick conformity indexes of the two plans were comparable the SCG-optimization with 2 arcs (1 noncoplanar and 1 coplanar) significantly improved the conventional VMAT with 3 arcs (2 noncoplanar and 1 coplanar). Specifically V16 V10 and V5 of the brain were reduced by 11%, 11% and 12% respectively. The beam delivery time was shortened by approximately 30%. Conclusion: The proposed 4pi arc space optimization technique promises to significantly reduce the brain toxicity while greatly improving the treatment efficiency.

60 APPLIED LIFE SCIENCES↗

Controlling superconductivity in La 2-x Sr x CuO 4+δ by ozone and vacuum annealing

In this study we performed a series of ozone and vacuum annealing experiments on epitaxial La 2-x Sr x CuO 4+δ thin films. The transition temperature after each annealing step has been measured by the mutual inductance technique. The relationship between the effective doping and the vacuum annealing time has been studied. Short-time ozone annealing at 470 °C oxidizes an underdoped film all the way to the overdoped regime. The subsequent vacuum annealing at 350 °C to 380 °C slowly brings the sample across the optimal doping point back to the undoped, non-superconducting state. Several ozone and vacuum annealing cycles have been done on the same sample and the effects were found to be repeatable and reversible Vacuum annealing of ozone-loaded LSCO films is a very controllable process, allowing one to tune the doping level of LSCO in small steps across the superconducting dome, which can be used for fundamental physics studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of the Charge Materials Range in Multistage Charge Burden Optimization for Foundry Furnaces

Optimization of charge burden for foundry furnaces lies in determining a percentage or mass (kg, t) of the share of each charge material in the burden with the lowest unit cost. A classic task of charge burden optimization requires a definition of an objective function, which most often defines the cost of the charge burden and a system of constraints, including technological assumptions such as the balance of chemical elements for the required chemical composition of the charge or molten metal, limitations of the mass fraction of the individual elements of the charge, and others. The solution for such an optimization task is a set of starting values for the devices which weigh and proportion the charge materials for a foundry furnace. The consequences of deviations from proper values, causes by inaccurate weighing or proportioning and human error as well, can be limited by using an appropriately designed and implemented multistage optimization algorithm. This article presents a mathematical model of such an algorithm and discussion of its practical application. The algorithm as described below can be an important element of computer-aided decision to be made by employees in the process of batch compilation or automatically control devices dosing individual batch components. An IT system with an implemented algorithm may significantly increase the efficiency of charge preparation for a foundry furnace, guaranteeing its correct chemical composition despite batch materials dosing errors. It will contribute to a significant improvement of economic indicators of liquid metal production, with the effect of boosting the competitiveness of the foundry industry.

36 MATERIALS SCIENCE↗

Molecular packing control enables excellent performance and mechanical property of blade-cast all-polymer solar cells

All-polymer solar cells (all-PSCs) are the most promising power generators for flexible and portable devices due to excellent morphology stability and outstanding mechanical property. Prior work suggests high crystallinity is beneficial to device performance but detrimental to mechanical property, therefore identifying the optimized ratio between crystalline and amorphous domains becomes important. In this work, we demonstrated highly efficient and mechanically robust all-PSCs by blade-coating technology in ambient environment based on PTzBI:N2200 system. By controlling the aggregation in solution state and ultrafast film formation process, a weakly ordered molecular packing morphology as well as small phase separation is obtained, which leads to not only the good photovoltaic performance (8.36%-one of the best blade-cast device in air) but also prominent mechanical characteristic. The controlled film reflects a remarkable elongation with the crack onset strain of 15.6%, which is the highest result in organic solar cells without adding elastomers. These observations indicate the great promise of the developed all-PSCs for practical applications toward large-area processing technology.

42 ENGINEERING↗

Process design for recovering rare-earth elements from mine tailings with low rare-earth concentrations via sequential leaching and solvent extraction

Rare earth elements (REEs) are essential for advanced technologies and yet face significant supply chain risks due to their concentrated global production and limited domestic availability. Addressing this challenge requires efficient processes capable of upgrading low-grade secondary resources such as mine tailings. In this study, we developed a novel separation flowsheet that integrates sequential leaching and 2-stage solvent extraction (SX) processes to recover high-purity heavy REEs (HREEs) and light REEs (LREEs) from a simulated mine-tailing concentrate containing 2.4 wt% total REEs (TREEs; 0.6 wt% LREEs and 1.8 wt% HREEs). Sequential leaching with controlled pH adjustment selectively precipitated REEs while retaining the large amount of impurities in the solution, producing an REE-enriched leachate by following leaching processes with roughly twice the REE concentration and half the impurity concentration compared to that of single-step leaching. The optimized SX flowsheet employed Cyanex 572 to extract HREEs and Fe over LREEs, followed by Fe removal using tributyl phosphate (TBP), while the raffinate stream was processed by SX with di(2-ethylhexyl)phosphoric acid (D2EHPA) to recover LREEs under optimized conditions balancing both extraction efficiency and purity. Although increased extractant availability in the organic phase improved LREE recovery, it also increased co-extraction of Ca, underscoring trade-offs in process optimization. Both HREE- and LREE-rich solutions were subsequently precipitated into solid products via oxalate precipitation, resulting in high-purity REE solids containing ∼92.0 wt% HREEs (∼95.7 wt% TREEs) and ∼92.8 wt% LREEs (∼94.0 wt% TREEs). In conclusion, this proof-of-concept study using simulated mine tailings demonstrates a promising approach for upgrading low-grade REE resources, while highlighting the need for future validation with real materials.

Mine tailings↗

PULSION registered HP: Tunable, High Productivity Plasma Doping

Plasma doping has been explored for many implant applications for over two decades and is now being used in semiconductor manufacturing for two applications: DRAM polysilicon counter-doping and contact doping. The PULSION HP is a new plasma doping tool developed by Ion Beam Services for high-volume production that enables customer control of the dominant mechanism--deposition, implant, or etch. The key features of this tool are a proprietary, remote RF plasma source that enables a high density plasma with low chamber pressure, resulting in a wide process space, and special chamber and wafer electrode designs that optimize doping uniformity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Surface Morphology and Topology of TiO{sub 2} Nanocoating on Metal Substrates at Different Molar Concentrations and Speed

Mild steel is low carbon steel content of carbon less than 0.25 wt%. This type of steels is low cost to produce while has good toughness and outstanding ductility. Nanocoated mild steel surface is greatly many applications such as in automobile body component, pipelines, wall of operation's room and operation's theatre. Anatase TiO{sub 2} coating were successfully synthesized by optimize the sol-gel solution wherein glacial acetic acid and controlling of annealing temperature. In this paper initial study of TiO{sub 2} nanocoating on mild steel surface was presented. TiO{sub 2} nanocoating was prepared by spin coating technique. Spin coating technique is low processing temperature and ease of compositional modifications. The sol-gel concentration and speed (rpm) of spin coating were varied to produce different surface morphology and topology of samples. The surface phase, morphology and topology of coating were investigated by X-ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM) and Atomic Force Microscopy (AFM) while the roughness of coating was determined by Surface Profiler (SP).

36 MATERIALS SCIENCE↗

Overview of the Systems Engineering Process as It Applies to The National Spherical Torus Experiment - Upgrade (NSTX-U)

This paper addresses the systems engineering (SE) processes used for the National Spherical Torus Experiment-Upgrade (NSTX-U). It focuses on SE across the life cycle of the system, including requirements management, interface control, risk management, integration, and verification/validation. This is particularly significant as NSTX-U includes new systems and an existing plant and reused systems from past projects such as the Tokamak Fusion Test Reactor (TFTR). The implementation of SE provides the ability to control complexity, improve communications, identify risks early, and prevent defects. Systems engineering principles are applied to enhance the integration while maintaining relevance in plasma research. Furthermore, these principles define a deliberate process to identify and resolve issues early in the development cycle, thus reducing risks and optimizing outputs. They also establish relationships to gather knowledge from experts and stakeholders, supporting the continued ability of NSTX-U in building and maintaining an operational system able to adapt to changing environments and emerging requirements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A New Shape Optimization Approach for Lightweighting Electric Machines Inspired by Additive Manufacturing

Minimizing the mass in electric machines while maintaining superior performance is a new requirement for the advancement of drivetrains used in wind energy and electric mobility. Topology optimization (TO) for lightweighting electric machines using traditional approaches typically explores a restricted design space allowed by standard parametrizable geometry and manufacturing, while advanced methods, such as cell-based density approaches, suffer from a lack of robust manufacturability constraints during the optimization process. To overcome these drawbacks, we explore a grid-independent, boundary optimization where the outer shape of the magnet is parameterized using Bezier curves. We conduct a design of experiments (DOE) to study the effect of different magnet shapes on machine performance by varying the control points on the Bezier curves. A machine-learning-based surrogate model is constructed using the data from the DOE to quantify the relationship between the control points, air-gap torque, and mass. The control points are then optimized to maximize the torque density. The approach is used for minimizing electrical steel mass in the International Energy Agency (IEA) 15-MW radial flux direct-drive wind turbine generator. The new approach to shape optimization resulted in smooth and concise shapes that can be easily additively manufactured with up to a 20-ton reduction in electrical steel mass.

additive manufacturing↗

Development of Cost-Competitive Advanced Thermoelectric Generators for Direct Conversion of Vehicle Waste Heat into Useful Electrical Power

General Motors LLC (GM) proposed a project to develop a cost-effective thermoelectric generator (TEG) that is fully integrated into a GM production light-duty vehicle. The project goal was to reduce automotive energy consumption and CO 2 emissions by generating usable electricity from exhaust gas waste heat. The project objectives were to overcome the major obstacles to TEG commercialization and demonstrate 5% fuel economy improvement over the US06 drive cycle. We investigated electrical and thermal management strategies that included: (1) reducing electrical accessory load on the alternator using thermoelectric (TE) generated power; (2) shifting engine-driven accessories to electrical drive to raise the electrical accessory load consumption; (3) attempting to use the excess electrical power for something other than the vehicle electrical load e.g., propulsion (optimal for hybrids); and (4) implementing fast engine/transmission warm-up during cold-start. We developed a TEG system and all vehicle controls and electrical systems for full vehicle integration. The TEG system was modeled and analyzed for performance and cost. Heat exchangers and thermal interfaces between heat exchangers and TE modules were optimized for TE performance. Other objectives of the project were to (1) further optimize compositions and processing parameters for TE materials, (2) develop suitable diffusion barriers, interfaces electrical interconnections, and thermal contacts within TE modules, (3) implement adequate protection of TE materials and modules from degradation during operation, and (4) develop manufacturing and assembly processes for large scale production of TE materials and components that include scale-up plans for the production of 100,000 TEG units per year.

33 ADVANCED PROPULSION SYSTEMS↗

Performance Evaluation of LPBF Manufactured 316H Components

This work represents the continuation of a benchmark study that includes modeling, fabrication and characterization as demonstration to support industry’s adoption of advanced manufacturing processes in a variety of structures. This comprehensive study investigated the feasibility of using additive manufacturing (AM) technologies, specifically Laser Powder Direct Energy Deposition (LP-DED) and Laser Powder Bed Fusion (LPBF), to produce complex nuclear microreactor components using 316H stainless steel. The research focused on manufacturing an expanded elbow pipe component with transitioning sections, which are traditionally difficult and costly to produce through conventional manufacturing methods. The overall study’s primary objectives are therefore demonstrating AM viability for nuclear applications, optimizing process parameters, developing comprehensive material characterization protocols, validating computational modeling approaches, and establishing manufacturing guidelines for complex geometries. Although the initial work included the phased approach of cubical, upscaled cylindrical components, it is to enable to obtain more knowledge for the printing of the expanded elbow structure. The project achieved significant progress in process development by successfully optimizing LP-DED parameters to achieve 99.16-99.97% relative density in 316H stainless steel components. Through systematic evaluation of sixteen cube samples with varied laser powers (400-700W) and scan speeds (600-900 mm/min), optimal processing windows were identified at 500-550W with 600-700 mm/min or 650-700W with 650-900 mm/min scan speeds. The DED manufactured 316H demonstrated mechanical properties comparable or superior to wrought materials, with Young's modulus ranging from 153-208 GPa and controlled microstructural characteristics including greater than 95% face-centered cubic (FCC) phases and engineered cellular structures with sizes between 3.23-6.17 µm.

36 MATERIALS SCIENCE↗

Inductively Coupled Nonthermal Plasma Synthesis of Size-Controlled γ-Al 2 O 3 Nanocrystals

Gamma alumina (γ-Al 2 O 3 ) is widely used as a catalyst and catalytic support due to its high specific surface area and porosity. However, synthesis of γ-Al 2 O 3 nanocrystals is often a complicated process requiring high temperatures or additional post-synthetic steps. Here, we report a single-step synthesis of size-controlled and monodisperse, facetted γ-Al 2 O 3 nanocrystals in an inductively coupled nonthermal plasma reactor using trimethylaluminum and oxygen as precursors. Under optimized conditions, we observed phase-pure, cuboctahedral γ-Al 2 O 3 nanocrystals with defined surface facets. Nuclear magnetic resonance studies revealed that nanocrystal surfaces are populated with AlO 6 , AlO 5 and AlO 4 units with clusters of hydroxyl groups. Nanocrystal size tuning was achieved by varying the total reactor pressure yielding particles as small as 3.5 nm, below the predicted thermodynamic stability limit for γ-Al 2 O 3 .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Memristor design rules for dynamic learning and edge processing applications

The ability to dynamically learn and adapt to changes in the environment is one of the hallmarks of biological systems. In this work, we identify the subset of the design space of memristive materials that is optimal for dynamic learning applications. Using an architecture inspired on the learning center of the insect brain, we implement a model system consisting of a discrete implementation of spiking neurons where dynamic learning takes place on a set of plastic synapses formed by memristor pairs in a crossbar array. Using two separate benchmarks, one comprising the dynamic learning of the Modified National Institute of Standards and Technology dataset and another one targeting one shot learning, we have identified the key properties that memristive materials should have to be optimal dynamic learners. The results obtained show that a fine degree of control of the memristor internal state is key to achieve high classification accuracy during dynamic learning but that within this optimal region learning is extremely robust both to device variability and to errors in the writing of the internal state, in all cases allowing for 2 sigma variations greater than 40% without significant loss of accuracy, hence overcoming two of the perceived limitations of memristors. By additionally requiring that learning takes place concurrently to information processing, we are able to derive a set constraints to the memristor dynamics.

36 MATERIALS SCIENCE↗

Na 2 Ti 3 O 7 Nanoplatelets and Nanosheets Derived from a Modified Exfoliation Process for Use as a High-Capacity Sodium-Ion Negative Electrode

The increasing interest in Na-ion batteries (NIBs) can be traced to sodium abundance, its low cost compared to lithium, and its intercalation chemistry being similar to that of lithium. We report that the electrochemical properties of a promising negative electrode material, Na 2 Ti 3 O 7 , are improved by exfoliating its layered structure and forming 2D nanoscale morphologies, nanoplatelets, and nanosheets. Exfoliation of Na 2 Ti 3 O 7 was carried out by controlling the amount of proton exchange for Na + and then proceeding with the intercalation of larger cations such as methylammonium and propylammonium. An optimized mixture of nanoplatelets and nanosheets exhibited the best electrochemical performance in terms of high capacities in the range of 100–150 mA h g –1 at high rates with stable cycling over several hundred cycles. These properties far exceed those of the corresponding bulk material, which is characterized by slow charge-storage kinetics and poor long-term stability. The results reported in this study demonstrate that charge-storage processes directed at 2D morphologies of surfaces and few layers of sheets are an exciting direction for improving the energy and power density of electrode materials for NIBs.

25 ENERGY STORAGE↗

Geometric Analysis Based Double Closed-loop Iterative Learning Control of Output PDF Shaping of Fiber Length Distribution in Refining Process

In order to improve the pulp quality and to reduce the energy consumption, the fiber length distribution (FLD) is generally employed as one of the important technological indexes in the refining process. Considering that the traditional mean and variance of fiber length are unable to adequately characterize the non-Gaussian distribution properties, this paper proposes a novel geometric analysis based double closed-loop iterative learning control (ILC) method for probability density function (PDF) shaping of output FLD in the refining process. Primarily, a RBF neural network (NN) with Gaussian-type is utilized to approximate the square root PDF in the inner loop, where the RBF basis function parameters (center and width) are tuned between any two adjacent batches by using an ILC law, and the subspace identification method can be applied to establish the state-space model of weight vector. Then, for the sake of accelerating the convergence rate of the closed-loop sysyem, a geometric analysis based ILC method is adopted in the outer loop. Lastly, both simulation and experiments demonstrate the effectiveness and practicability of the proposed approach.

42 ENGINEERING↗

Lithium Difluorophosphate as a Dendrite-Suppressing Additive for Lithium Metal Batteries

The growth of lithium (Li) dendrite and the low Coulombic efficiency (CE) of Li anode during repeated Li plating/stripping processes are the two major obstacles to the development of rechargeable Li metal batteries (LMBs). Introducing a dendrite-suppressing additive into the nonaqueous electrolyte is one of the facile and effective solutions to promote the commercialization of LMBs. Herein, Li difluorophosphate (LiPO2F2, LiDFP) is used as an electrolyte additive to suppress the growth of Li dendrites by forming a vigorous and stable solid electrolyte interphase layer on the Li metal surface. Moreover, the Li CE can be largely improved from 84.6% for the conventional LiPF6-based electrolyte to 95.2% by the addition of an optimal concentration of LiDFP at 0.15 M. The optimal LiDFP-containing electrolyte can allow the Li||Li symmetric cells to cycle stably for more than 500 and 200 h at 0.5 and 1.0 mA cm-2, respectively, much longer than the control electrolyte without LiDFP additive. Meanwhile, this LiDFP-containing electrolyte can also greatly enhance the cycle life of the Li||LiNi1/3Co1/3Mn1/3O2 cells with a moderately high mass loading of 9.7 mg cm-2. These results demonstrate that LiDFP has extensive application prospects as a dendrite-suppressing additive in advanced LMBs.

Shi, Pengcheng↗

Mechanochemical method of producing triethoxysilane

A mechanochemical method for synthesis of triethoxysilane from silicon-copper contact mass and ethyl alcohol in the developed vibration reactor is presented. It is shown that the process of a direct alkoxysilane synthesis in the vibro-boiling layer is affected by a series of control parameters such as the ratio between the contact mass and the mass of grinding bodies, the grinding body sizes and their ratios in a polydisperse mixture, power density. Optimization of these parameters allowed us to obtain HSi(OEt){sub 3} with a selectivity of 50% at a silicon conversion of 90% without the use of promoters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Redesigning Radiotherapy Quality Assurance: Opportunities to Develop an Efficient, Evidence-Based System to Support Clinical Trials-Report of the National Cancer Institute Work Group on Radiotherapy Quality Assurance

Purpose: In the context of national calls for reorganizing cancer clinical trials, the National Cancer Institute sponsored a 2-day workshop to examine challenges and opportunities for optimizing radiotherapy quality assurance (QA) in clinical trial design. Methods and Materials: Participants reviewed the current processes of clinical trial QA and noted the QA challenges presented by advanced technologies. The lessons learned from the radiotherapy QA programs of recent trials were discussed in detail. Four potential opportunities for optimizing radiotherapy QA were explored, including the use of normal tissue toxicity and tumor control metrics, biomarkers of radiation toxicity, new radiotherapy modalities such as proton beam therapy, and the international harmonization of clinical trial QA. Results: Four recommendations were made: (1) to develop a tiered (and more efficient) system for radiotherapy QA and tailor the intensity of QA to the clinical trial objectives (tiers include general credentialing, trial-specific credentialing, and individual case review); (2) to establish a case QA repository; (3) to develop an evidence base for clinical trial QA and introduce innovative prospective trial designs to evaluate radiotherapy QA in clinical trials; and (4) to explore the feasibility of consolidating clinical trial QA in the United States. Conclusion: Radiotherapy QA can affect clinical trial accrual, cost, outcomes, and generalizability. To achieve maximum benefit, QA programs must become more efficient and evidence-based.

62 RADIOLOGY AND NUCLEAR MEDICINE↗