Search NASA⌕ Search

SEARCH · Search NASA

Results for “sample activation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Novel Photonuclear Methods to Produce an Argon-37 Standard

The mission of this research is to explore novel photonuclear-based pathways into the production of 37Ar. Above-background detection levels of 37Ar uniquely indicates the occurrence of an underground nuclear explosion, produced from fission neutrons interacting in the surrounding environment through the 40Ca(n,a)37Ar reaction. The half-life of 35 days allows on-site inspectors (OSI) adequate time following the nuclear event to detect 37Ar and verify compliance or defiance of non-proliferation treaties such as the Comprehensive Nuclear-Test-Ban Treaty (CTBT). An 37Ar standard would give OSI the ability to calibrate their detectors and measure detector efficiency allowing for the quantification of detected activity, give OSI authentic samples to test detectors in field exercises, and improve models predicting diffusion pathways of 37Ar through the underground environment.

43 PARTICLE ACCELERATORS↗

Establishing rapid analysis of Pu isotopes in seawater to study the impact of Fukushima nuclear accident in the Northwest Pacific

In order to evaluate the impact of the Fukushima derived Pu isotopes on seawater, a new analytical method to rapidly determine Pu isotopes in seawater by SF-ICP-MS including Fe(OH)2 primary co-precipitation, CaF 2 /LaF 3 secondary co-precipitation and TEVA+UTEVA+DGA extraction chromatographic separation was established. High concentration efficiency (~100%) and high U decontamination factor (~10 7 ) were achieved. The plutonium chemical recoveries were 74–88% with the mean of 83 ± 5%. The precisions for both 240 Pu/ 239 Pu atom ratios and 239+240 Pu activity concentrations were less than 5% when 15 L of seawater samples with the typical 239+240 Pu activity of the Northwest Pacific were measured. It just needs 12 hours to determine plutonium using this new method. The limit of detection (LOD) for 239 Pu and 240 Pu were both 0.08 fg/mL, corresponding to 0.01 mBq/m 3 for 239 Pu and 0.05 mBq/m 3 for 240 Pu when a 15 L volume of seawater was measured. This method was applied to determine the seawater samples collected 446–1316 km off the FDNPP accident site in the Northwest Pacific in July of 2013. The obtained 239+240 Pu activity concentrations of 1.21–2.19 mBq/m 3 and the 240 Pu/ 239 Pu atom ratios of 0.198–0.322 implied that there was no significant Pu contamination from the accident to the Northwest Pacific.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Ultra-sensitive isotope probing to quantify activity and substrate assimilation in microbiomes

Abstract Background Stable isotope probing (SIP) approaches are a critical tool in microbiome research to determine associations between species and substrates, as well as the activity of species. The application of these approaches ranges from studying microbial communities important for global biogeochemical cycling to host-microbiota interactions in the intestinal tract. Current SIP approaches, such as DNA-SIP or nanoSIMS allow to analyze incorporation of stable isotopes with high coverage of taxa in a community and at the single cell level, respectively, however they are limited in terms of sensitivity, resolution or throughput. Results Here, we present an ultra-sensitive, high-throughput protein-based stable isotope probing approach (Protein-SIP), which cuts cost for labeled substrates by 50–99% as compared to other SIP and Protein-SIP approaches and thus enables isotope labeling experiments on much larger scales and with higher replication. The approach allows for the determination of isotope incorporation into microbiome members with species level resolution using standard metaproteomics liquid chromatography-tandem mass spectrometry (LC–MS/MS) measurements. At the core of the approach are new algorithms to analyze the data, which have been implemented in an open-source software ( https://sourceforge.net/projects/calis-p/ ). We demonstrate sensitivity, precision and accuracy using bacterial cultures and mock communities with different labeling schemes. Furthermore, we benchmark our approach against two existing Protein-SIP approaches and show that in the low labeling range used our approach is the most sensitive and accurate. Finally, we measure translational activity using 18 O heavy water labeling in a 63-species community derived from human fecal samples grown on media simulating two different diets. Activity could be quantified on average for 27 species per sample, with 9 species showing significantly higher activity on a high protein diet, as compared to a high fiber diet. Surprisingly, among the species with increased activity on high protein were several Bacteroides species known as fiber consumers. Apparently, protein supply is a critical consideration when assessing growth of intestinal microbes on fiber, including fiber-based prebiotics. Conclusions We demonstrate that our Protein-SIP approach allows for the ultra-sensitive (0.01 to 10% label) detection of stable isotopes of elements found in proteins, using standard metaproteomics data.

59 BASIC BIOLOGICAL SCIENCES↗

Achieving Accuracy Requirements for Forest Biomass Mapping: A Spaceborne Data Fusion Method for Estimating Forest Biomass and Lidar Sampling Error

The synergistic use of active and passive remote sensing (i.e., data fusion) demonstrates the ability of spaceborne light detection and ranging (LiDAR), synthetic aperture radar (SAR) and multispectral imagery for achieving the accuracy requirements of a global forest biomass mapping mission (+/-20 Mg/ha or 20%, the greater of the two, for at least 80% of grid cells). A data fusion approach also provides a means to extend 3D information from discrete spaceborne LiDAR measurements of forest structure across scales much larger than that of the LiDAR footprint. For estimating biomass, these measurements mix a number of errors including those associated with LiDAR footprint sampling over regional-global extents. A general framework for mapping above ground live forest biomass density (AGB) with a data fusion approach is presented and verified using data from NASA field campaigns near Howland, ME, USA, to assess AGB and LiDAR sampling errors across a regionally representative landscape. We combined SAR and Landsat-derived optical (passive optical) image data to identify contiguous areas (>0.5 ha) that are relatively homogenous in remote sensing metrics (forest patches). We used this image-derived data with simulated spaceborne LiDAR derived from orbit and cloud cover simulations and airborne data from NASA's Laser Vegetation Imaging Sensor (LVIS) to compute AGB and estimate LiDAR sampling error for forest patches and 100 m, 250 m, 500 m, and 1 km grid cells. At both the patch and grid scales, we evaluated differences in AGB estimation and sampling error from the combined use of LiDAR with both SAR and passive optical and with either SAR or passive optical alone. First, this data fusion approach demonstrates that incorporating forest patches into the AGB mapping framework can provide sub-grid forest information for coarser grid-level AGB reporting. Second, a data fusion approach for estimating AGB using simulated spaceborne LiDAR with SAR and passive optical image combinations reduced forest AGB sampling errors 12%-38% from those where LiDAR is used with SAR or passive optical alone. In absolute terms, sampling errors were reduced from 14-40 Mg/ha to 11-28 Mg/ha across all grid scales and prediction methods, where minimum sampling errors were 11, 15, 18, and 22 Mg/ha for 1 km, 500 m, 250 m, and 100 m grid scales, respectively. Third, spaceborne global scale accuracy requirements were achieved whereby at least 80% of the grid cells at 100 m, 250 m, 500 m, and 1 km grid levels met AGB accuracy requirements using a combination of passive optical and SAR along with machine learning methods to predict vegetation structure metrics for forested areas without LiDAR samples. Finally, using either passive optical or SAR, accuracy requirements were met at the 500 m and 250 m grid level, respectively..

LiDAR↗

Facile Synthesis of Fe/N/S‐Doped Carbon Tubes as High‐Performance Cathode and Anode for Microbial Fuel Cells

Abstract As a renewable energy technology, microbial fuel cell (MFC) has been attracting increasing attention in recent decades. However, practical applications of MFCs has been hampered by the unsatisfactory electrode performance, in particular, at the cathode. Herein, Fe/N/S‐doped carbon hollow tubes were prepared by a facile two‐stage procedure involving hydrothermal treatment and pyrolysis at controlled temperatures. Electrochemical studies showed that the obtained samples exhibited an apparent electrocatalytic activity towards oxygen reduction reaction in both alkaline and acidic media, a performance comparable to that of commercial Pt/C, and the sample prepared at 800 °C stood out as the best among the series with a half‐wave potential of +0.81 V vs. RHE and an electron transfer number of 3.98 at +0.6 V vs. RHE. The Fe/N/S‐doped carbon tubes also exhibited a remarkable performance as an MFC anode by facilitating bacterial growth and electron transfer between the biofilm and electrode. In fact, an MFC based on the carbon tubes as both cathode and anode showed a markedly higher performance (maximum power density 479 W m −3 ) than the control MFC based on a graphene aerogel anode and Pt/C cathode (359 W m −3 ). These results suggest that Fe/N/S‐doped carbon composites can be used for the fabrication of high‐efficiency MFC electrodes.

Yang, Wei↗

A MID-INFRARED IMAGING SURVEY OF SUBMILLIMETER-SELECTED GALAXIES WITH THE SPITZER SPACE TELESCOPE

We present Spitzer-IRAC and MIPS mid-IR observations of a sample of 73 radio-detected submillimeter-selected galaxies (SMGs) with spectroscopic redshifts, the largest such sample published to date. From our data, we find that IRAC colors of SMGs are much more uniform as compared with rest-frame UV and optical colors, and z>1.5 SMGs tend to be redder in their mid-IR colors than both field galaxies and lower-z SMGs. However, the IRAC colors of the SMGs overlap those of field galaxies sufficiently that color-magnitude and color-color selection criteria suggested in the literature to identify SMG counterparts produce ambiguous counterparts within an 8'' radius in 20%-35% of cases. We use a rest-frame J-H versus H-K color-color diagram and a S {sub 24}/S {sub 8.0} versus S {sub 8.0}/S {sub 4.5} color-color diagram to determine that 13%-19% of our sample are likely to contain active galactic nuclei which dominate their mid-IR emission. We observe in the rest-frame JHK colors of our sample that the rest-frame near-IR emission of SMGs does not resemble that of the compact nuclear starburst observed in local ultraluminous IR galaxies and is consistent with more widely distributed star formation. We take advantage of the fact that many high-z galaxy populations selected at different wavelengths are detected by Spitzer to carry out a brief comparison of mid-IR properties of SMGs to UV-selected high-z galaxies, 24 {mu}m-selected galaxies, and high-z radio galaxies, and find that SMGs have mid-IR fluxes and colors which are consistent with being more massive and more reddened than UV-selected galaxies, while the IRAC colors of SMGs are most similar to powerful high-z radio galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Measurement of soil moisture trends with airborne scatterometers

In an effort to investigate aircraft multisensor responses to soil moisture and vegetation in agricultural fields, an intensive ground sampling program was conducted in Guymon, Oklahoma and Dalhart, Texas in conjunction with aircraft data collected for visible/infrared and passive and active microwave systems. Field selections, sampling techniques, data processing, and the aircraft schedule are discussed for both sites. Field notes are included along with final (normalized and corrected) data sets.

Jones, C. L.↗

Synthesis and photocatalytic property of BiOBr/palygorskite composites

Graphical abstract: - Highlights: • BiOBr/palygorskite composite photocatalysts were prepared for the first time. • The synchronous role of adsorbability and photocatalytic oxidation was studied. • BiOBr/palygorskite composite exhibit enhanced photocatalytic activities. • The optimal ratio of [Bi]/palygorskite was identified. - Abstract: BiOBr/palygorskite composite photocatalysts were prepared by a hydrothermal method for the first time, which were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transformed infrared spectroscopy (FTIR), N{sub 2}-sorption and UV–vis diffuse reflectance spectroscopy. The photocatalytic activity of the as-prepared samples was evaluated by decomposition of methyl orange (MO) under visible light irradiation. The results revealed that BiOBr/palygorskite composites had strong photoabsorption in the visible light region. All BiOBr/palygorskite composites possessed higher photocatalytic activity than pure BiOBr. The highest activity was obtained by S5.0 sample. The enhanced photocatalytic performance was attributed to strong photoabsorption, the synchronous role of adsorbability and photocatalytic oxidation on BiOBr/palygorskite composites and the efficient separation of photogenerated electron–hole pairs.

36 MATERIALS SCIENCE↗

Use of microwaves to improve nutritional value of soybeans for future space inhabitants

Whole soybeans from four different varieties at different moisture contents were microwaved for varying times to determine the conditions for maximum destruction of trypsin inhibitor and lipoxygenase activities, and optimal growth of chicks. Microwaving 150 gm samples of soybeans (at 14 to 28% moisture) for 1.5 min was found optimal for reduction of trypsin inhibitor and lipoxygenase activities. Microwaving 1 kgm samples of soybeans for 9 minutes destroyed 82% of the trypsin inhibitor activity and gave optimal chick growth. It should be pointed out that the microwaving time would vary according to the weight of the sample and the power of the microwave oven. The microwave oven used in the above experiments was rated at 650 watts 2450 MHz.

Singh, G.↗

Mg II and Ly-alpha fluxes in M dwarfs - Evaluation of an acoustic model

Surface fluxes of Mg II and Ly-alpha from a sample of M dwarfs have been reported by Panagi and Mathioudakis (PM, 1992). In order to determine if acoustic effects can reproduce the fluxes in the least active ('basal') stars in the PM sample, we have constructed steady state models of plane-parallel atmospheres with T(eff) = 3000 and 4000 K including heating by shock dissipation. The models incorporate radiative losses in the chromosphere by solving the transfer equation for two strong lines (Mg II k and Ly-alpha). Predictions of standard weak shock theory are expected to overestimate the rate of energy deposition in the chromospheres of M dwarfs compared to the rate of deposition in F, G, or K dwarfs. In order to incorporate this effect in M dwarfs, we compute a series of atmospheric models in which, for a given T(eff), the standard weak shock dissipation rate is reduced by a series of factors F(r). Although the input acoustic flux F(mech) may in principle be determined uniquely by T(eff) and log g, the correct value to use in any particular case is not well known. We therefore use F(mech) and F(r) as parameters to construct a family of M dwarf models at various T(eff) and g. Comparing with the observed fluxes in the least active M dwarfs of the PM sample, we find that our models reproduce the observed fluxes of both Mg II and Ly-alpha best if F(mech) is close to the value predicted by Bohn (1984) and if F(r) is approximately equal to 10-20.

Mullan, D. J.↗

GeoLab in NASA's Pressurized Excursion Module: First Results from the 2010 Field Trials

Before humans explore other planets, NASA must develop advanced techniques for collection, preservation and return of unique extraterrestrial samples. To help evaluate hardware requirements and operational concepts for future sample-return missions, we designed and built GeoLab our first generation lab for geological samples into NASA s Habitat Demonstration Unit in the Pressurized Excursion Module (HDU1-PEM). The center of GeoLab is a glovebox for the examination of samples in a shirt-sleeve environment. As part of a deployable habitat, GeoLab can participate in NASA s analog missions that simulate planetary exploration activities and support the testing of relevant technologies for collecting and handling geological samples. Over time, these tests will evaluate sample handling environments (field and lab), sampling tools and analytical instruments, and different scenarios involving both robotic and human procedures. The GeoLab design supports evolving tests and configurations. The glovebox is mounted on the habitat bulkhead, with three sample pass-though chambers that allow for direct sample transfer into the glovebox from the outside. The glovebox design and construction (low-particle shedding, minimally off-gassing materials) provides a clean environment to reduce sample contamination; in the future, we will integrate a positive pressure, enriched nitrogen atmosphere. The glovebox is equipped with configurable instrument ports. The 2010 test included a mass balance, a stereomicroscope with a HD camera for detailed imaging of samples, and a handheld XRF analyzer for preliminary geochemical characterization of samples. Network cameras provided context imagery and sample handling activities. We present early results from the initial field trial of GeoLab during the 2010 Desert Research and Technology Studies (D-RATS) planetary analog test near Flagstaff AZ. The 2010 D-RATS mission involved two rovers, the habitat with GeoLab, four crew members, and a team of scientists and flight controllers. The crewed rovers conducted geological traverses and collected samples on the planetary surface. Selected samples were transferred into GeoLab for detailed examination and initial analysis, providing critical data to the science team for evaluation and prioritization of samples.

Evans, Cynthia A.↗

In-Cell Thermal Creep Frame Capability: Out-of-Cell Construction and Subsized Sample Testing

This report describes the activities related to the construction of an in-cell thermal creep test facility for small-scale specimens in the irradiation-assisted stress-corrosion cracking (IASCC) hotcell located at the Fuels and Applied Science Building (FASB) at INL. The whole project includes three stages: (i) conceptual design; (ii) out-of-cell demonstration tests; and (iii) in-cell demonstration testing. During the current fiscal year (FY)-2022, materials and equipment required to construct the conceptual design outlined in a previous report were procured. Frames for conducting out-of-cell testing have been constructed, and testing plans have been developed to assess the operation of the newly constructed frames. Preliminary testing of flat subsized tensile specimens on ASTM creep frames has also been completed for two sample thicknesses: 0.75 mm and 1.0 mm.

36 MATERIALS SCIENCE↗

High-Throughput In Vitro Glycoside Hydrolase (HIGH) Screening for Enzyme Discovery

A high-throughput protein-expression and screening method (HIGH method, see picture) provides a rapid approach to the discovery of active glycoside hydrolases in environmental samples. Finally, HIGH screening combines cloning, protein expression, and enzyme hydrolysis in one pot; thus, the entire process from gene expression to activity detection requires only three hours.

Kim, Tae-Wan↗

Advanced Test Reactor Safety Basis Update for Gas-Cooled Experiments

The Advanced Test Reactor (ATR) supports neutron irradiation of several types of experiments. One such experiment type is referred to as a gas leadout. Gas leadout experiments actively flow gas through the experiment which allows for active temperature control. It also allows for in-situ data of the experiment. For example, fission gas migration through a fuel sample can be monitored via activity of the sweep gas. Historically, ex-pile equipment and fission product monitors were housed in shielded ATR cubicles. Due to other facility updates, cubicle space is no longer available for gas leadout experiment equipment. To support continued operation of gas leadout experiments, ATR completed a safety basis update that supports a new housing for leadout equipment that may process potentially contaminated gas. In addition to the structure and associated equipment, technical safety requirements regarding handling and storage of experiments needed to be revised to support fueled gas leadout experiments and associated outage configurations. The safety basis update addressed the full lifecycle of these experiments, including experiment movement and interim storage, and credible abnormal events such as failures or leaks in contaminated gas tubing in occupied areas. This paper discusses the completed analyses performed to support the safety basis update associated with gas leadout experiments, including thermal-hydraulic evaluation, probabilistic analysis, and dose consequence analyses.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Wilson Corners SWMU 001 2014 Annual Long Term Monitoring Report Kennedy Space Center, Florida

This document presents the findings of the 2014 Long Term Monitoring (LTM) that was completed at the Wilson Corners site, located at the National Aeronautics and Space Administration (NASA) John F. Kennedy Space Center (KSC), Florida. The goals of the 2014 annual LTM event were to evaluate the groundwater flow direction and gradient and to monitor the vertical and downgradient horizontal extent of the volatile organic compounds (VOCs) in groundwater at the site. The LTM activities consisted of an annual groundwater sampling event in December 2014, which included the collection of water levels from the LTM wells. During the annual groundwater sampling event, depth to groundwater was measured and VOC samples were collected using passive diffusion bags (PDBs) from 30 monitoring wells. In addition to the LTM sampling, additional assessment sampling was performed at the site using low-flow techniques based on previous LTM results and assessment activities. Assessment of monitoring well MW0052DD was performed by collecting VOC samples using low-flow techniques before and after purging 100 gallons from the well. Monitoring well MW0064 was sampled to supplement shallow VOC data north of Hot Spot 2 and east of Hot Spot 4. Monitoring well MW0089 was sampled due to its proximity to MW0090. MW0090 is screened in a deeper interval and had an unexpected detection of trichloroethene (TCE) during the 2013 LTM, which was corroborated during the March 2014 verification sampling. Monitoring well MW0130 was sampled to provide additional VOC data beneath the semi-confining clay layer in the Hot Spot 2 area.

Monitoring↗

Description of core samples returned by Apollo 12

Three core samples were collected by the Apollo 12 astronauts. Two are single cores, one of which (sample 12026) was collected close to the lunar module during the first extravehicular activity period and is 19.3 centimeters long. The second core (sample 12027) was collected at Sharp Crater during the second extravehicular activity period and is 17.4 centimeters long. The third sample is a double core (samples 12025 and 12028), which was collected near Halo Crater during the second extravehicular activity period. Unlike the other cores, the double-drive-tube core sample has complex layering with at least 10 clearly defined stratigraphic units. This core sample is approximately 41 centimeters long.

Lindsay, J. F.↗

Forecasting Coronal Mass Ejections from Vector Magnetograms

In a 17 vector magnetogram study of 12 bipolar active regions (Falconer, Moore, & Gary, 2002, ApJ in press), we correlated four quantitative global magnetic measures with the Coronal Mass Ejections (CME) productivity of the active region. The global measures included a measure of active region size, the total magnetic flux phi and three measures of an active region global nonpotentiality 1) the net current (I (sub N)), 2) the length of the strong-shear, strong-field main neutral line (L(sub SS)) and 3) and the normalized twist (alpha = muIN/PHI). The CME productivity was determined from YOHKOH/SXT observations, Geostationary Operational Environmental Satellite (GOES), and when possible Solar and Heliospheric Observatory/Large Angle and Spectrometric Coronagraph Experiment (SOHO/LASCO) observations within 12 days of the day of the magnetogram. We found that the three measures of global nonpotentiality (I(sub N), L(sub SS), alpha) were all well correlated (greater than 99% confidence level) with an active region's CME productivity. The sample size was to small to confirm if there was a statistical significant correlation of the globally nonscientist measures with future CME activity (i.e. from the date of the magnetogram forward). We are doubling our sample, and will report on the statistical significance of global nonpotentiality as a predictor of future CME productivity. The new active regions are all from the first year of the upgraded MSFC vector magnetograms. This work, is funded by NSF through the Space Weather Program, by NASA through the Living with the Star, Targeted Research and Technology, and by NASA Solar Physics Supporting Research and Technology Program. The upgrade to the MSFC vector magnetograph was supported by the High Energy Solar Spectroscopic Imager (HESSI) mission.

Falconer, D. A.↗

Rotating Pip Detection and Stall Warning in High-Speed Compressors Using Structure Function

A statistic for both rotating pip and incipient stall detection, called Structure Function is introduced for use in high speed research compressor environments. Experimental studies on stall inception processes have long observed two types of pre-stall compressor activity. Presently there exist methods for indicating modal stall precursive events in the compressor. This is a first application of a new method to detect rotating pip activity prior to stall in research compressors. The algorithm requires a very short sample of data to distinguish pip activity prior to stall, and thus may be used in a real time application. Additionally, this Structure Function algorithm is also used as a single sensor stall warning method under a variety of operating conditions, including clean inlet conditions, radially and circumferentially distorted inlet conditions, and in examples of steady air injection along the casing, and controlled air injection conditions. Structure Function provides a potential advantage over linear spectral techniques and wavelet algorithms for stall detection due to the simplicity of the algorithm and because it does not rely on a priori knowledge of frequency content.

Bright, Michelle M.↗