Search NASA⌕ Search

SEARCH · Search NASA

Results for “sequencing experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Direct observation of the exotic β – γ – α decay mode in the T z = – 1 nucleus Na 20

The exotic β – γ – α decay mode of 20 Na has been directly observed for the first time in the Day-one experiment at the Beijing Radioactive Ion-beam Facility. The 20 Na source was produced by using a 100-MeV proton beam bombarding a stack of microporous MgO thick target and delivered as an intense mass separated beam after online ionization. A high-efficiency simultaneous measurement of β, γ, and α transitions enables the β-delayed γ – γ and α – γ coincidence spectroscopy. Here three β – γ – α exotic decay sequences in 20 Na are discovered, which expands the rare decay modes observed in β decay. Moreover, a β – α –decay sequence to the 6130-keV 3 – state of 16 O is observed, which is likely through the 12367-keV 1 + state in 20 Ne. The experimentally deduced B(F) and B(GT) are compared to the shell-model calculation, the allowed β transition strengths can be well accounted for by using sd shell-model space interactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1980

Clarification process: Resolution of decision-problem conditions

A model of a general process which occurs in both decisionmaking and problem-solving tasks is presented. It is called the clarification model and is highly dependent on information flow. The model addresses the possible constraints of individual indifferences and experience in achieving success in resolving decision-problem conditions. As indicated, the application of the clarification process model is only necessary for certain classes of the basic decision-problem condition. With less complex decision problem conditions, certain phases of the model may be omitted. The model may be applied across a wide range of decision problem conditions. The model consists of two major components: (1) the five-phase prescriptive sequence (based on previous approaches to both concepts) and (2) the information manipulation function (which draws upon current ideas in the areas of information processing, computer programming, memory, and thinking). The two components are linked together to provide a structure that assists in understanding the process of resolving problems and making decisions.

Dieterly, D. L.↗
NASA NTRS1990

An application for multi-person task synchronization

Computer applications are studied that will enable a group of people to synchronize their actions when following a predefined task sequence. It is assumed that the people involved only have computer workstations available to them for communication. Hence, the approach is to study how the computer can be used to help a group remain synchronized. A series of applications were designed and developed that can be used as vehicles for experimentation. An example of how this technique can be used for a remote coaching capability is explained in a report describing an experiment that simulated a Life Sciences experiment on-board Space Station Freedom, with a ground based principal investigator providing the expertise by coaching the on-orbit mission specialist.

Brown, Robert L.↗
NASA NTRS2000

Timing Noise in SGR 1806-20

We have phase connected a sequence of Rossi X-ray Timing Explorer Proportional Counter Array observations of SGR 1806-20 covering 178 days. We find a simple secular spin-down model does not adequately fit the data. The period derivative varies gradually during the observations between 8.1 and 11.7 x 10(exp -11) s/s (approx. 40% larger than the long term trend), while the average burst rate as seen with the Burst and Transient Source Experiment drops throughout the time interval. The phase residuals show no evidence for periodicity, but more closely resemble timing noise as seen ill radio pulsars. The magnitude of the timing noise., however, is large relative to the noise level typically found in radio pulsars (Delta(sub 8) = 4.8; frequency derivative average power approx. = 8 X 10(exp -20) Hz/sq s). Combined with the noise levels measured for some AXPs. we find all magnetar candidates have A8 values larger than those expected from a simple extrapolation of the correlation found in radio pulsars. We find the timing noise ill SGR 1806-20 is greater than or equal to the levels found in some accreting systems (e.g., Vela X-1, 4U 1538-52 and 4U 1626-67). Alternatively, an orbital model with a period P(sub orb) = 733 days provides a statistically acceptable fit to the data. If the phase residuals are created by Doppler shifts from a gravitationally bound companion. then the allowed parameter space for the mass function (small) and orbital separation (large) rule out the possibility of accretion from the companion sufficient to power the persistent emission from the SGR.

Woods, Peter M.↗
NASA NTRS2001

Comparison of a space shuttle flight (STS-78) and bed rest on human muscle function

The purpose of this investigation was to assess muscle fiber size, composition, and in vivo contractile characteristics of the calf muscle of four male crew members during a 17-day spaceflight (SF; Life and Microgravity Sciences Spacelab Shuttle Transport System-78 mission) and eight men during a 17-day bed rest (BR). The protocols and timelines of these two investigations were identical, therefore allowing for direct comparisons between SF and the BR. The subjects' age, height, and weight were 43 +/- 2 yr, 183 +/- 4 cm, and 86 +/- 3 kg for SF and 43 +/- 2 yr, 182 +/- 3 cm, and 82 +/- 4 kg for BR, respectively. Calf muscle strength was examined before SF and BR; on days 2, 8, and 12 during SF and BR; and on days 2 and 8 of recovery. Muscle biopsies were obtained before and within 3 h after SF (gastrocnemius and soleus) and BR (soleus) before reloading. Maximal isometric calf strength and the force-velocity characteristics were unchanged with SF or BR. Additionally, neither SF nor BR had any effect on fiber composition or fiber size of the calf muscles studied. In summary, no changes in calf muscle strength and morphology were observed after the 17-day SF and BR. Because muscle strength is lost during unloading, both during spaceflight and on the ground, these data suggest that the testing sequence employed during the SF and BR may have served as a resistance training countermeasure to attenuate whole muscle strength loss.

Non-NASA Center↗
NASA NTRS1984

Experiments in control of flexible structures with noncolocated sensors and actuators

While the stable control of such flexible structures as limber spacecraft is easily achieved through the colocation of control actuators with sensors, noncolocation renders this extremely difficult. The most difficult case in point is that in which structural damping is low and spacecraft stiffness and inertia values are uncertain and changing. Attention is presently given to an apparatus in which each basic sensor/actuator noncolocation configuration is available, and inertias can be abruptly halved or doubled during control maneuvers. This feature can impose a sudden reversal in the plant's pole-zero sequence, which is a very difficult condition for the controller. Test results obtained to date demonstrate the inherent difficulty of achieving robustness in the case of noncolocation. It is noted that there may be very simple configurations in which there is no alternative to adaptive control.

Cannon, R. H., Jr.↗
DOE OSTI2020

Soil Microbes Trade-Off Biogeochemical Cycling for Stress Tolerance Traits in Response to Year-Round Climate Change

Winter air temperatures are rising faster than summer air temperatures in high-latitude forests, increasing the frequency of soil freeze/thaw events in winter. To determine how climate warming and soil freeze/thaw cycles affect soil microbial communities and the ecosystem processes they drive, we leveraged the Climate Change across Seasons Experiment (CCASE) at the Hubbard Brook Experimental Forest in the northeastern United States, where replicate field plots receive one of three climate treatments: warming (+5°C above ambient in the growing season), warming in the growing season + winter freeze/thaw cycles (+5°C above ambient +4 freeze/thaw cycles during winter), and no treatment. Soil samples were taken from plots at six time points throughout the growing season and subjected to amplicon (rDNA) and metagenome sequencing. We found that soil fungal and bacterial community composition were affected by changes in soil temperature, where the taxonomic composition of microbial communities shifted more with the combination of growing-season warming and increased frequency of soil freeze/thaw cycles in winter than with warming alone. Warming increased the relative abundance of brown rot fungi and plant pathogens but decreased that of arbuscular mycorrhizal fungi, all of which recovered under combined growing-season warming and soil freeze/thaw cycles in winter. The abundance of animal parasites increased significantly under combined warming and freeze/thaw cycles. We also found that warming and soil freeze/thaw cycles suppressed bacterial taxa with the genetic potential for carbon (i.e., cellulose) decomposition and soil nitrogen cycling, such as N fixation and the final steps of denitrification. These new soil communities had higher genetic capacity for stress tolerance and lower genetic capacity to grow or reproduce, relative to the communities exposed to warming in the growing season alone. Our observations suggest that initial suppression of biogeochemical cycling with year-round climate change may be linked to the emergence of taxa that trade-off growth for stress tolerance traits.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1987

Incremental planning to control a blackboard-based problem solver

To control problem solving activity, a planner must resolve uncertainty about which specific long-term goals (solutions) to pursue and about which sequences of actions will best achieve those goals. A planner is described that abstracts the problem solving state to recognize possible competing and compatible solutions and to roughly predict the importance and expense of developing these solutions. With this information, the planner plans sequences of problem solving activities that most efficiently resolve its uncertainty about which of the possible solutions to work toward. The planner only details actions for the near future because the results of these actions will influence how (and whether) a plan should be pursued. As problem solving proceeds, the planner adds new details to the plan incrementally, and monitors and repairs the plan to insure it achieves its goals whenever possible. Through experiments, researchers illustrate how these new mechanisms significantly improve problem solving decisions and reduce overall computation. They briefly discuss current research directions, including how these mechanisms can improve a problem solver's real-time response and can enhance cooperation in a distributed problem solving network.

Durfee, E. H.↗
NASA NTRS1989

Integrating planning and reactive control

Artificial intelligence research on planning is concerned with designing control systems that choose actions by manipulating explicit descriptions of the world state, the goal to be achieved, and the effects of elementary operations available to the system. Because planning shifts much of the burden of reasoning to the machine, it holds great appeal as a high-level programming method. Experience shows, however, that it cannot be used indiscriminately because even moderately rich languages for describing goals, states, and the elementary operators lead to computational inefficiencies that render the approach unsuitable for realistic applications. This inadequacy has spawned a recent wave of research on reactive control or situated activity in which control systems are modeled as reacting directly to the current situation rather than as reasoning about the future effects of alternative action sequences. While this research has confronted the issue of run-time tractability head on, in many cases it has done so by sacrificing the advantages of declarative planning techniques. Ways in which the two approaches can be unified are discussed. The authors begin by modeling reactive control systems as state machines that map a stream of sensory inputs to a stream of control outputs. These machines can be decomposed into two continuously active subsystems: the planner and the execution module. The planner computes a plan, which can be seen as a set of bits that control the behavior of the execution module. An important element of this work is the formulation of a precise semantic interpretation for the inputs and outputs of the planning system. They show that the distinction between planned and reactive behavior is largely in the eye of the beholder: systems that seem to compute explicit plans can be redescribed in situation-action terms and vice versa. They also discuss practical programming techniques that allow the advantages of declarative programming and guaranteed reactive response to be achieved simultaneously.

Rosenschein, Stanley J.↗
DOE OSTI2024

Adaptive Laboratory Evolution for Enhanced Performance of Cupriavidus necator on Formic Acid

The need to decarbonize our economy is becoming ever more pressing. CO2, can be electrochemically reduced to formic acid, a soluble C1 molecule that can be used to store carbon and energy. Cupriavidus necator H16, a soil bacterium, capable of consuming and growing on formic acid as its sole carbon source, is well positioned to upgrade CO2-derived formic acid into value added chemicals such as sustainable aviation fuel. To improve the performance of C. necator on formic acid adaptive laboratory evolution (ALE), a proven tool for improving microbial fitness, has been conducted using continuous pH-stat bioreactors. The system works on the basis that consumption of formic acid raises the pH and triggers the addition of more formic acid to maintain the pH at 6.7, such that formic acid is provided at the same rate as it is consumed. This system has been coupled with level control to achieve continuous fermentation where cells acquiring mutations that improve growth on formic acid become more abundant in the population, from which they can be isolate and characterized. This configuration where the dilution rate is controlled by pH-stat has been found to seek out a dilution rate that matches the exponential growth rate of the organism. During developmental experiments it was discovered that formic acid accumulated to inhibitory levels. It was determined that the nitrogen source, ammonium hydroxide, must be tailored to the carbon consumption to avoid formic acid accumulation. ALE has run in three lineages for 2000+ hours and 300+ generations. Growth of evolved isolates derived from all lineages will be evaluated on formic acid and those with improved growth rates or biomass yield will be subjected to whole genome sequencing to identify potentially causative mutations. These mutations will be evaluated individually and in combination to identify those that improve growth on formic acid.

adaptive laboratory evolution↗
NASA NTRS2021

Results from the ASTERIA CubeSat Extended Mission Experiments

Over the past two years, JPL has used the ASTERIA (Arcsecond Space Telescope Enabling Research In Astrophysics) CubeSat as an in-flight test platform during extended missions. ASTERIA successfully completed its prime mission in early 2018, and continued to operate in low Earth orbit (LEO) for an additional twenty months. This paper describes demonstrations that were performed on the spacecraft and on the ground-based testbed during the extended mission. These demonstrations fall into three categories: Autonomy technology maturation, hardware characterization, and science discovery. Autonomy technology maturation supported three development efforts. The first shifted the spacecraft commanding paradigm from time-based sequences to Task Networks (tasknets), which allow simpler commanding and more robust onboard execution. The second demonstrated onboard orbit determination in Low Earth Orbit (LEO) without GPS. This activity used a fully-independent means of spacecraft orbit determination for Earth orbiters using only passive imaging. The third technology provided in situ hardware health state estimation using a model-based reasoning technique. These three technologies were demonstrated either in flight or on the testbed individually, and then were combined to demonstrate the capability to perform autonomous navigation on board without ground intervention, even in the presence of anomalies. Hardware characterization involved both onboard and ground-based activities. On board, nonstandard attitude control modes were commanded to characterize the spacecraft pointing jitter as a function of target brightness, reaction wheel speed, controller gain, and the number of guide stars. The results provide insights into the contribution of jitter to the ASTERIA photometry and inform the feasibility of future astrophysics small satellite missions for which jitter control is an enabling technology. On the ground, the ASTERIA Operations Team coordinated with Amazon Web Services (AWS) to configure their new ground stations to communicate with ASTERIA to prove out their viability. ASTERIA used AWS ground stations for nominal operations for the last four months of the mission. Finally, ASTERIA continued to perform exoplanet science as the spacecraft was well-suited to execute long-term monitoring of stars such as alpha Centauri to search for small transiting planets. The science team also imaged a number of interesting objects including a comet, an asteroid, cities at night, and the moon, and coordinated with other projects on Targets of Opportunity for follow-up confirmations and co-observations. Throughout the prime and the extended missions, the ASTERIA spacecraft proved to be a mighty platform that “will go into history as an innovative milestone.”[1 - Zurbuchen]

Doran, Patrick↗
DOE OSTI2021

Viruses infecting a warm water picoeukaryote shed light on spatial co-occurrence dynamics of marine viruses and their hosts

The marine picoeukaryote Bathycoccus prasinos has been considered a cosmopolitan alga, although recent studies indicate two ecotypes exist, Clade BI (B. prasinos) and Clade BII. Viruses that infect Bathycoccus Clade BI are known (BpVs), but not that infect BII. We isolated three dsDNA prasinoviruses from the Sargasso Sea against Clade BII isolate RCC716. The BII-Vs do not infect BI, and two (BII-V2 and BII-V3) have larger genomes (~210 kb) than BI-Viruses and BII-V1. BII-Vs share ~90% of their proteins, and between 65% to 83% of their proteins with sequenced BpVs. Phylogenomic reconstructions and PolB analyses establish close-relatedness of BII-V2 and BII-V3, yet BII-V2 has 10-fold higher infectivity and induces greater mortality on host isolate RCC716. BII-V1 is more distant, has a shorter latent period, and infects both available BII isolates, RCC716 and RCC715, while BII-V2 and BII-V3 do not exhibit productive infection of the latter in our experiments. Global metagenome analyses show Clade BI and BII algal relative abundances correlate positively with their respective viruses. The distributions delineate BI/BpVs as occupying lower temperature mesotrophic and coastal systems, whereas BII/BII-Vs occupy warmer temperature, higher salinity ecosystems. Accordingly, with molecular diagnostic support, we name Clade BII Bathycoccus calidus sp. nov. and propose that molecular diversity within this new species likely connects to the differentiated host-virus dynamics observed in our time course experiments. Overall, the tightly linked biogeography of Bathycoccus host and virus clades observed herein supports species-level host specificity, with strain-level variations in infection parameters.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Deep learning with plasma plume image sequences for anomaly detection and prediction of growth kinetics during pulsed laser deposition

Abstract Materials synthesis platforms that are designed for autonomous experimentation are capable of collecting multimodal diagnostic data that can be utilized for feedback to optimize material properties. Pulsed laser deposition (PLD) is emerging as a viable autonomous synthesis tool, and so the need arises to develop machine learning (ML) techniques that are capable of extracting information from in situ diagnostics. Here, we demonstrate that intensified-CCD image sequences of the plasma plume generated during PLD can be used for anomaly detection and the prediction of thin film growth kinetics. We develop multi-output (2 + 1)D convolutional neural network regression models that extract deep features from plume dynamics that not only correlate with the measured chamber pressure and incident laser energy, but more importantly, predict parameters of an auto-catalytic film growth model derived from in situ laser reflectivity experiments. Our results demonstrate how ML with in situ plume diagnostics data in PLD can be utilized to maintain deposition conditions in an optimal regime. Further, the predictive capabilities of plume dynamics on the kinetics of film growth or other film properties prior to deposition provides a means for rapid pre-screening of growth conditions for the non-expert, which promises to accelerate materials optimization with PLD.

36 MATERIALS SCIENCE↗
NASA NTRS1986

Parallel structures in human and computer memory

If one thinks of our experiences as being recorded continuously on film, then human memory can be compared to a film library that is indexed by the contents of the film strips stored in it. Moreover, approximate retrieval cues suffice to retrieve information stored in this library. One recognizes a familiar person in a fuzzy photograph or a familiar tune played on a strange instrument. A computer memory that would allow a computer to recognize patterns and to recall sequences the way humans do is constructed. Such a memory is remarkably similiar in structure to a conventional computer memory and also to the neural circuits in the cortex of the cerebellum of the human brain. It is concluded that the frame problem of artificial intelligence could be solved by the use of such a memory if one were able to encode information about the world properly.

Kanerva, P.↗
NASA NTRS2025

The Microbiome of A Tomato Crop Grown Under Different Lighting Regimes on the International Space Station

The VEG-05 experiment presented here investigated the effect of red-rich and blue-rich light recipes in Veggie on the microbiome of the Veggie facility and the plant tissues of a dwarf tomato variety, Solanum lycopersicum cv. Red Robin. For food safety, the plants were screened using culture-based methods for potential human pathogens that may cause infection by consumption of the fruit. The microbiome was investigated using bacterial 16S and fungal ITS sequencing methods to enumerate and identify bacterial and fungal communities on tomato fruit, roots, leaves, rooting substrate, and Veggie facility surfaces grown under blue-rich or red-rich lighting. Comparisons of microbial communities were made between lighting treatments, as well as for flight and ground controls. This analysis determined the core microbiome and microbiological composition for tomato plants grown under a blue-rich or red-rich lighting treatment and microgravity conditions. Culture-based pathogen screening, corroborated by 16S and ITS sequencing, yielded negative results. Bacterial and fungal counts were lower for ground controls than in-flight samples. However, there were no differences in microbial counts between lighting treatments. Regardless of lighting treatment, plant components shared a core microbiome, although some differences were observed in genera between lighting treatments.

Veggie↗
NASA NTRS1977

Establishing effective working relations with a potential user community - NASA Lewis Research Center experience

The NASA Lewis Research Center has held a series of six major and unique technology utilization conferences which were major milestones in planned structured efforts to establish effective working relationships with specific technology user communities. These efforts were unique in that the activities undertaken prior to the conference were extensive, and effectively laid the groundwork for productive technology transfer following, and as a direct result of, the conferences. The effort leading to the conference was in each case tailored to the characteristics of the potential user community, however, the common factors comprise a basic framework applicable to similar endeavors. The process is essentially a planned sequence of steps that constitute a technical market survey and a marketing program for the development of beneficial applications of aerospace technology beyond the aerospace field.

Foster, P.↗
DOE OSTI2019

Solid-state NMR experiments have been developed to probe crystallization behavior fluoropolymers (Progress Summary)

The FK-800 fluoropolymer elastomer is being developed as a replacement material for the Kel-F 800 binder in the plastic bonded explosive PBX-9502. These polymers are a random co-polymer of poly-vinylidene fluoride (PVDF) and poly-chlorotrifluoroetheylene (PCTFE) in nominal 1:3 ratio. Initial characterizations of the FK-800 replacement show similar characteristics as the legacy Kel-F 800. However, differences in bulk crystallinity and crystallization kinetics have been observed. These differences may be driven by small differences in the distribution of the monomers on the polymer backbone (sequence distribution).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2005

Identification of transcribed sequences in Arabidopsis thaliana by using high-resolution genome tiling arrays

Using a maskless photolithography method, we produced DNA oligonucleotide microarrays with probe sequences tiled throughout the genome of the plant Arabidopsis thaliana. RNA expression was determined for the complete nuclear, mitochondrial, and chloroplast genomes by tiling 5 million 36-mer probes. These probes were hybridized to labeled mRNA isolated from liquid grown T87 cells, an undifferentiated Arabidopsis cell culture line. Transcripts were detected from at least 60% of the nearly 26,330 annotated genes, which included 151 predicted genes that were not identified previously by a similar genome-wide hybridization study on four different cell lines. In comparison with previously published results with 25-mer tiling arrays produced by chromium masking-based photolithography technique, 36-mer oligonucleotide probes were found to be more useful in identifying intron-exon boundaries. Using two-dimensional HPLC tandem mass spectrometry, a small-scale proteomic analysis was performed with the same cells. A large amount of strongly hybridizing RNA was found in regions "antisense" to known genes. Similarity of antisense activities between the 25-mer and 36-mer data sets suggests that it is a reproducible and inherent property of the experiments. Transcription activities were also detected for many of the intergenic regions and the small RNAs, including tRNA, small nuclear RNA, small nucleolar RNA, and microRNA. Expression of tRNAs correlates with genome-wide amino acid usage.

Arabidopsis/genetics↗