Search NASA⌕ Search

SEARCH · Search NASA

Results for “shape approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Reduction of Jet Penetration in a Cross-Flow by Using Tabs

A tab placed suitably on a nozzle that produces a jet in a cross-flow can reduce the penetration of the jet. This effect, achieved when the tab is placed on the windward side of the nozzle relative to the cross flow, may be of interest in film cooling applications. Wind tunnel experiments are carried out, in the momentum ratio (J) range of 10-90, to investigate the tab geometry that would maximize this effect. The preliminary results show that a 'delta tab' having a base width approximately fifty percent of the nozzle diameter may be considered optimum. With a given tab size, the effect is more pronounced at higher J. Reduction in jet penetration by as much as 40% is observed. Comparable reduction in jet penetration is also obtained when a triangular shaped tab is placed flush with the tunnel wall or with its apex tilted down into the jet nozzle (the 'delta tab' being the configuration in which the apex is tilted up). However, the delta tab involves the least flow blockage and pressure loss. Relative to the baseline case, the lateral spreading of the jet is found to be more with the delta tab but less with other orientations of the tab.

Zaman, K. B. M. Q.↗

Near-Net Shape Powder Metallurgy Rhenium Thruster

This paper describes the development of a method to produce a near-net shape (NNS) powder metallurgy (PM) rhenium combustion chamber of the size 445 N (100 lbf) used in a high performance liquid apogee engine. These engines are used in low earth Orbit and geostationary orbit for satellite positioning systems. The developments in near-net shape powder metallurgy rhenium combustion chambers reported in this paper will reduce manufacturing cost of the rhenium chambers by 25 percent, and reduce the manufacturing time by 30 to 40 percent. The quantity of rhenium metal powder used to produce a rhenium chamber is reduced by approximately 70 percent and the subsequent reduction in machining schedule and costs is nearly 50 percent.

Leonhardt, Todd↗

Landsat 9 Thermal Infrared Sensor 2 Preliminary Stray Light Assessment

Although the Thermal Infrared Sensor 2 (TIRS-2) is a nearidentical copy of the Landsat 8/TIRS-1 instrument, an important design change to the optical system was designed to mitigate the stray light issue that plagued the TIRS-1 instrument [1, 2, 3]. This change involved the addition of several baffles strategically placed within the optical telescope to block the stray light paths that were present in the TIRS- 1 design. The specific optical changes were determined by first characterizing the TIRS-1 stray light paths on-orbit and then deriving a detailed optical model that was used to determine the locations and shapes of the mitigating baffles. The stray light design changes to the TIRS-2 instrument were confirmed through the initial thermal-vacuum characterization tests. Preliminary assessments of TIRS-2 indicate that the total stray light magnitude has been drastically reduced to a total magnitude of approximately 1% or less.

Montanar, Matthew↗

The Effects of Impactor Shape on the Compression After Impact Strength of Carbon/Epoxy Face Sheet Foam Core Sandwich Structure

This study presents experimental results of compression after impact (CAI) strength testing of foam core sandwich structure with carbon/epoxy face sheets impacted at three different energies with either a blunt or sharp tip impactor. The impact energies used were chosen to span the barely visible impact damage (BVID) thresholds for the sharp (4.1 J) and blunt (12.9 J) impactors with an impact energy approximately halfway between these (8.1 J) also used. While most impact testing on composites utilize a hemispherical (blunt) impactor, actual damage to a part may be due to an object impacting the part that is not blunt, but sharp and the impact response and resulting CAI strength values may be different for a given impact energy level. In this study, with regards to the impact response, the sandwich specimens showed larger transverse displacements (by about a factor of two) during the impact event when impacted by a sharp impactor versus a blunt impactor. The maximum load of impact was larger for the blunt impactor by about a factor of three. The barely visible impact damage (BVID) threshold energy was lower by about a factor of three for the sharp impactor. The absorbed energy of impact was higher for the sharp impactor. The CAI strength results showed that the sharp impactor gave lower average CAI strength values at the lowest impact energy level used, slightly lower average CAI strength values for the medium impact energy used and about the same average CAI strength values for the highest impact energy used.

sandwich structure↗

Passive Element Shapes Antenna Radiation Pattern

Parasitic waveguide element suppresses ground-reflected multipath radiation. Small section of waveguide placed in front of phased-array antenna operating at 850 MHz modifies radiation field by reducing power density parallel to and below ground plane without significantly affecting primary radiation at angles greater than 20 degrees above horizontal. Acts as parasitic radiator that shifts phase of portion of wavefront by approximately 180 degrees, causing partial cancellation in ground plane, thereby reducing radiation intensity in that direction by about 10 dB. Produces corresponding reduction in multipath radiation scattered from ground. Waveguide technique also used to decouple two nearby antennas.

Bonebright, M. E.↗

Dynamic upper atmospheric force model on stabilized vehicles for a high-precision trajectory computer program

The upper atmosphere model draws heavily on the behavior of the earth's upper atmosphere which exhibits cyclic as well as irregular variations in density profile, temperature, pressure, and composition in unison with solar activities as deduced from the more recent land-based and satellite observations. The lift and drag model is designed specifically for inertially stabilized vehicles of the Mariner class, with possible extension to gravity gradient stabilized vehicles of the GEOS class. The model considers operation in the free molecular flow regimes with large Knudsen numbers. The vehicle is considered a composite structure with basic components having well-defined shapes, each with its own surface characteristics in terms of temperature, reflectivity, and accommodation of free stream molecules. The model takes into account both the calculation of precise aerodynamic force coefficients in terms of expansion of modified Bessel functions in speed ratios and angle of attack, and approximate force coefficients when the speed ratios approach infinity. Other considerations include specular and diffused reflectivity, shielding, and shadow effects.

Khatib, A. R.↗

Splash albedo protons between 4 and 315 MeV at high and low geomagnetic latitudes

Results are reported for measurements of the differential energy spectrum of splash-albedo protons at high geomagnetic latitude during three periods of the last solar cycle as well as at low latitude during one of those periods. The measurements were made with a balloon-borne solid-state detector telescope. Splash-albedo protons with energies between 4 and 315 MeV were observed in fluxes of approximately 81, 70, and 48 protons/sq m per sec per sr at high latitude and in fluxes of approximately 37 protons/sq m per sec per sr at low latitude. It is shown that the difference between the first and third high-latitude measurements was due to solar modulation of the cosmic-ray parent nuclei. The albedo spectrum is found to have a similar shape for both latitudes, and it is suggested that the difference in intensity can be explained by different local geomagnetic cutoffs.

Wenzel, K.-P.↗

An approximate solution for the free vibrations of rotating uniform cantilever beams

Approximate solutions are obtained for the uncoupled frequencies and modes of rotating uniform cantilever beams. The frequency approximations for flab bending, lead-lag bending, and torsion are simple expressions having errors of less than a few percent over the entire frequency range. These expressions provide a simple way of determining the relations between mass and stiffness parameters and the resultant frequencies and mode shapes of rotating uniform beams.

Peters, D. A.↗

Satellite altimetry

The present status of the instrumentation and applications of satellite altimetry are reviewed. The earth-orbiting altimeters launched thus far are all basically conventional monostatic tracking radars which make three fundamental measurements: (1) time of arrival (altitude), (2) shape (waveform sample gates), and (3) amplitude (automatic gain control). A comparison of the fundamental characteristics of the present altimeter systems is given, along with evaluation of the preliminary results of altimeter data collected by Seasat-1. The application results described are mainly from the analysis of approximately 1/3 of the 2000 hours of altimeter data obtained from GEOS-3 through October 1978.

Stanley, H. R.↗

The design of a precision pointing contol system for the Space Infrared Telescope Facility

The design and performance simulation of the Space Infrared Telescope Facility pointing and control system are described. The system design is constrained by such considerations as image stability, maneuver capability, cryogen lifetime, and structural flexibility. The primary design driver is the requirement to rapidly execute small angle reorientations of the telescope's optical axis. The flexibility of the spacecraft was simulated using a simplified multibody model which provided an approximation of the primary bending modes. The rather conventional attitude control system design of PID type with a 0.5 Hz bandwidth was enhanced to meet the small angle maneuver requirements by the use of three techniques: (1) a feedforward loop to improve the time response; (2) torque shaping to minimize structural excitation; and (3) active image stabilization to remove residual pointing error and jitter. Simulation results indicate that the system has the desired performance and can be designed using techniques and hardware well within the state-of-the-art.

Sridhar, B.↗

Time-domain imaging

The quest for the highest resolution microwave imaging and principle of time-domain imaging has been the primary motivation for recent developments in time-domain techniques. With the present technology, fast time varying signals can now be measured and recorded both in magnitude and in-phase. It has also enhanced our ability to extract relevant details concerning the scattering object. In the past, the interface of object geometry or shape for scattered signals has received substantial attention in radar technology. Various scattering theories were proposed to develop analytical solutions to this problem. Furthermore, the random inversion, frequency swept holography, and the synthetic radar imaging, have two things in common: (1) the physical optic far-field approximation, and (2) the utilization of channels as an extra physical dimension, were also advanced. Despite the inherent vectorial nature of electromagnetic waves, these scalar treatments have brought forth some promising results in practice with notable examples in subsurface and structure sounding. The development of time-domain techniques are studied through the theoretical aspects as well as experimental verification. The use of time-domain imaging for space robotic vision applications has been suggested.

Tolliver, C. L.↗

Lateral modes of broad area semiconductor lasers - Theory and experiment

Calculations of the lateral modes of an ideal broad area laser, including the nonlinear interaction between the carriers and the optical field, are made. The results include periodically modulated near fields and single- and double-lobed far fields similar to those previously measured. The unsaturable losses are higher and quantum efficiencies are lower than those determined from plane-wave approximations. Broad area InGaAs-GaAlAs-GaAs quantum-well lasers were fabricated and measured and found to closely agree with the theory in near, far, and spectrally resolved near fields. An occultation experiment on the far field confirms previously predicted unstable resonatorlike modes with V-shaped fronts.

Lang, Robert J.↗

An Investigation of the Drag of Windshields in the 8-foot High-Speed Wind Tunnel

Report presents the results of tests made to determine the drag of closed-cockpit and transport-type windshields. The tests were made at speeds corresponding to a Mach number range of approximately 0.25 to 0.58 in the NACA 8-foot high-speed wind tunnel. This speed range corresponds to a test Reynolds number range of 2,510,000 to 4,830,000 based on the mean aerodynamic chord of the full-span model (17.29 in.). The shapes of the windshield proper, the hood, and the tail fairing were systematically varied to include common types and refined design.

Robinson, Russell G↗

An outer gap model of high-energy emission from rotation-powered pulsars

We describe a refined calculation of high-energy emission from rotation-powered pulsars based on the outer gap model of Cheng, Ho, & Ruderman (1986 a, b). In this calculation, vacuum gaps form in regions near the speed-of-light cylinder of the pulsar magnetosphere along the boundary between the closed and open field line zones. We have improved upon previous efforts to model the spectra from these pulsars (e.g., Cheng et al. 1986b; Ho 1989) by following the variation in particle production and radiation properties with position in the outer gap. Curvature, synchotron, and inverse-Compton scattering fluxes vary significantly over the gap, and their interactions via photon-photon pair production build up the radiating charge populations at varying rates. We have also incorporated an approximate treatment of the transport particle and photon fluxes between gap emission zones. These effects, along with improved computations of the particle and photon distribution, provide very important modifications of the model gamma-ray flux. In paticular, we attempt to make specific predictions of pulse profile shapes and spectral variations as a function of pulse phase and suggest further extensions to the model which may provide accurate computations of the observed high-energy emissions.

Chiang, James↗

Characterization of Ring Wave Spectra for Natural Rain: Measurements and Model for Remote Sensing Applications

Ring waves generated by natural rains from 1 to 100 mm/hr were measured in a small tank located in a field. Time series were obtained: (a) from a wire capacitance probe that measured surface elevation, (b) from an optical gauge that measured rain rates R, (c) from an anemometer that measured wind speeds and (d) from a 13.5 GHz scatterometer (w polarization, and 30 degree incidence angle). Ring wave frequency spectra are computed from the surface elevation data for each minute of rain. All the spectra have a similar shape, with a maximum near 5 Hz, and with a more rapid decay towards higher frequencies than towards lower frequencies. A log-Gaussian spectral model provides a useful representation of these data and analysis of the model coefficients shows that the peak frequency and bandwidth are approximately constant, but the magnitude increases as R increases, Additionally, the normalized radar cross section from the scatterometer varies approximately linearly with the spectral line corresponding to the Bragg-wavelength, so together the log-Gaussian ring wave model and the Bragg scattering theory should be useful for a broad range of applications. These findings can be used to help interpret remote sensing data during rain events and to guide model development for radar scattering from rain roughened seas.

Bliven, L.↗

An Imaging Laser Altimeter for Lunar Scientific Exploration

A new approach to laser altimetry is offered by the development of micro-lasers and pixilated detectors that enable very high resolution measurement of topography and relatively wide swath observations. An imaging altimeter with a 8x8 array detector working at a probability of less than a single photon/shot could map the Moon or similar sized body in approximately 2 years and provide 5 meter horizontal resolution topography and a 10 centimeter vertical accuracy. In addition, it would provide surface roughness and surface slopes on similar length scales of 5 meters and be able to address a range of problems for which topography or lunar shape is important at the decimeter level. This includes the topography of the polar regions, where ice is thought to have been identified, and also the cratering history of the Moon which could be assessed with a dataset of uniform quality and high resolution.

Source record↗

An Imaging Laser Altimeter for Lunar Scientific Exploration

A new approach to laser altimetry is offered by the development of micro-lasers and pixilated detectors that enable very high resolution measurement of topography and relatively wide swath observations. An imaging altimeter with a 8x8 array detector working at a probability of less than a single photon/shot could map the Moon or similar sized body in approximately 2 years and provide 5 meter horizontal resolution topography and a 10 centimeter vertical accuracy. In addition, it would provide surface roughness and surface slopes on similar length scales of 5 meters and be able to address a range of problems for which topography or lunar shape is important at the decimeter level. This includes the topography of the polar regions, where ice is thought to have been identified, and also the cratering history of the Moon which could be assessed with a dataset of uniform quality and high resolution.

Smith, David E.↗

Orion Multi-Purpose Crew Vehicle (MPCV) Capsule Parachute Assembly System (CPAS) Wake Deficit Wind Tunnel Testing

During descent after re-entry into the Earth's atmosphere, the Orion CM deploys its drogue parachutes at approximately Mach 0.7. Accurately predicting the dynamic pressure experienced by the drogue parachutes at deployment is critical to properly designing the parachutes. This NASA Engineering and Safety Center assessment was designed to provide a complete set of flowfield measurements on and around an idealized Orion Crew Module shape with the most appropriate wind tunnel simulation of the Orion flight conditions prior to parachute deployment. This document contains the details of testing and the outcome of the assessment.

Ross, James C.↗