Search NASA⌕ Search

SEARCH · Search NASA

Results for “spatial variations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Climate Engineering with Stratospheric Aerosols and Associated Engineering Parameters

Climate engineering with stratospheric aerosols, an idea inspired by large volcaniceruptions, could cool the Earth’s surface and thus alleviate some of the predicted dangerous impacts of anthropogenic climate change. However, the effectiveness of climate engineering to achieve a particular climate goal, and any associated side effects, depend on certain aerosol parameters and how the aerosols are deployed in the stratosphere. Through the examples of sulfate and black carbon aerosols, this paper examines "engineering" parameters-aerosol composition, aerosol size, and spatial and temporal variations in deployment-for stratospheric climate engineering. The effects of climate engineering are sensitive to these parameters, suggesting that a particle could be found ordesigned to achieve specific desired climate outcomes. This prospect opens the possibility for discussion of societal goals for climate engineering.

aerosols↗

Quantifying and Understanding the Access Time to Dockless Micromobility: A Case Study in Washington, D.C.

Micromobility has been widely deployed in many cities. Similar as how access time/distance affects the travel demand to use public transit and informs transit system design, access time/distance to micromobility service measures its service efficiency and also serves as an equity indicator to inform city agencies from a regulation perspective. Though there is an increasing need to understand it, access to micromobility has not been sufficiently studied. This paper developed a framework to quantity the access time to dockless micromobility service (i.e., the minimum time needed to walk to reach the closest dockless micromobility vehicles). Based on the real-time vehicle location data collected from Washington, DC, this research quantified the access time to dockless micromobility, analyzed its spatial and temporal variation patterns and investigated its relationship with socio-demographic variables (i.e., population density, employment density and low-income population). The results revealed that the access time to dockless micromobility ranges between 0 to 4 minutes with the most frequently observed range of 0.5 to 1 minutes, and the city center area tends to have shorter access time than the outskirts areas. Results also indicate a quite stable access time level in DC with access time standard deviation of 0.2 to 0.5 minutes. After correlating the access time at census-block-group level with socio-demographic data, it was discovered that shorter access time usually aligns with larger population and employment density, and the proportion of low-income population was found not helpful with explaining the access time variation, which indicating a relatively equitable micromobility program.

access time↗

Endogenous and exogenous control of ecosystem function: N cycling in headwater streams

Allochthonous inputs act as resource subsidies to many ecosystems, where they exert strong influences on metabolism and material cycling. At the same time, metabolic theory proposes endogenous thermal control independent of resource supply. To address the relative importance of exogenous and endogenous influences, we quantified spatial and temporal variation in ecosystem metabolism and nitrogen (N) uptake using seasonal releases of {sup 15}N as nitrate in six streams differing in riparian-stream interaction and metabolic character. Nitrate removal was quantified using a nutrient spiraling approach based on measurements of downstream decline in {sup 15}N flux. Respiration (R) and gross primary production (GPP) were measured with whole-stream diel oxygen budgets. Uptake and metabolism metrics were addressed as z scores relative to site means to assess temporal variation. In open-canopied streams, areal uptake (U; {micro}g N {center_dot} m{sup -2} {center_dot} s{sup -1}) was closely related to GPP, metabolic rates increased with temperature, and R was accurately predicted by metabolic scaling relationships. In forested streams, N spiraling was not related to GPP; instead, uptake velocity (v{sub f}; mm/s) was closely related to R. In contrast to open-canopied streams, N uptake and metabolic activity were negatively correlated to temperature and poorly described by scaling laws. We contend that streams differ along a gradient of exogenous and endogenous control that relates to the relative influences of resource subsidies and in-stream energetics as determinants of seasonal patterns of metabolism and N cycling. Our research suggests that temporal variation in the propagation of ecological influence between adjacent systems generates phases when ecosystems are alternatively characterized as endogenously and exogenously controlled.

54 ENVIRONMENTAL SCIENCES↗

A hydrological emulator for global applications – HE v1.0.0

Abstract. While global hydrological models (GHMs) are very useful in exploring water resources and interactions between the Earth and human systems, their use often requires numerous model inputs, complex model calibration, and high computation costs. To overcome these challenges, we construct an efficient open-source and ready-to-use hydrological emulator (HE) that can mimic complex GHMs at a range of spatial scales (e.g., basin, region, globe). More specifically, we construct both a lumped and a distributed scheme of the HE based on the monthly abcd model to explore the tradeoff between computational cost and model fidelity. Model predictability and computational efficiency are evaluated in simulating global runoff from 1971 to 2010 with both the lumped and distributed schemes. The results are compared against the runoff product from the widely used Variable Infiltration Capacity (VIC) model. Our evaluation indicates that the lumped and distributed schemes present comparable results regarding annual total quantity, spatial pattern, and temporal variation of the major water fluxes (e.g., total runoff, evapotranspiration) across the global 235 basins (e.g., correlation coefficient r between the annual total runoff from either of these two schemes and the VIC is >0.96), except for several cold (e.g., Arctic, interior Tibet), dry (e.g., North Africa) and mountainous (e.g., Argentina) regions. Compared against the monthly total runoff product from the VIC (aggregated from daily runoff), the global mean Kling–Gupta efficiencies are 0.75 and 0.79 for the lumped and distributed schemes, respectively, with the distributed scheme better capturing spatial heterogeneity. Notably, the computation efficiency of the lumped scheme is 2 orders of magnitude higher than the distributed one and 7 orders more efficient than the VIC model. A case study of uncertainty analysis for the world's 16 basins with top annual streamflow is conducted using 100 000 model simulations, and it demonstrates the lumped scheme's extraordinary advantage in computational efficiency. Our results suggest that the revised lumped abcd model can serve as an efficient and reasonable HE for complex GHMs and is suitable for broad practical use, and the distributed scheme is also an efficient alternative if spatial heterogeneity is of more interest.

Liu, Yaling↗

Spatial Mapping of Thermal Boundary Conductance at Metal–Molybdenum Diselenide Interfaces

Improving the thermal transport across interfaces is a necessary consideration for micro- and nanoelectronic devices and necessitates accurate measurement of the thermal boundary conductance (TBC) and understanding of transport mechanisms. Two-dimensional transition-metal dichalcogenides (TMDs) have been studied extensively for their electrical properties, including the metal–TMD electrical contact resistance, but the thermal properties of these interfaces are significantly less explored irrespective of their high importance in their electronic devices. We isolate individual islands of MoSe 2 grown by chemical vapor deposition using photolithography and correlate the 2D variation of TBC with optical microscope images of the MoSe 2 islands. We measure the 2D spatial variation of the TBC at metal–MoSe 2 –SiO 2 interfaces using a modified time-domain thermoreflectance (TDTR) technique, which requires much less time than full TDTR scans. The thermoreflectance signal at a single probe delay time is compared with a correlation curve, which enables us to estimate the change in the signal with respect to the TBC at the metal–MoSe 2 –SiO 2 interface as opposed to recording the decay of the thermoreflectance signal over delay times of several nanoseconds. The results show a higher TBC across the Ti–MoSe 2 –SiO 2 interface compared to Al–MoSe 2 –SiO 2 . An image-clustering method is developed to differentiate the TBC for different numbers of MoSe 2 layers, which reveals that the TBC in single-layer regions is higher than that in the bilayer. Finally, we perform traditional TDTR measurements over a range of delay times and verify that TBC is higher at the Ti–MoSe 2 –SiO 2 interface compared to Al–MoSe 2 –SiO 2 , highlighting the importance of the choice of metal for heat dissipation at electrical contacts in TMD devices.

22 interfacial↗

WE-EF-207-07: Dual Energy CT with One Full Scan and a Second Sparse-View Scan Using Structure Preserving Iterative Reconstruction (SPIR)

Purpose: Conventional dual energy CT (DECT) reconstructs CT and basis material images from two full-size projection datasets with different energy spectra. To relax the data requirement, we propose an iterative DECT reconstruction algorithm using one full scan and a second sparse-view scan by utilizing redundant structural information of the same object acquired at two different energies. Methods: We first reconstruct a full-scan CT image using filtered-backprojection (FBP) algorithm. The material similarities of each pixel with other pixels are calculated by an exponential function about pixel value differences. We assume that the material similarities of pixels remains in the second CT scan, although pixel values may vary. An iterative method is designed to reconstruct the second CT image from reduced projections. Under the data fidelity constraint, the algorithm minimizes the L2 norm of the difference between pixel value and its estimation, which is the average of other pixel values weighted by their similarities. The proposed algorithm, referred to as structure preserving iterative reconstruction (SPIR), is evaluated on physical phantoms. Results: On the Catphan600 phantom, SPIR-based DECT method with a second 10-view scan reduces the noise standard deviation of a full-scan FBP CT reconstruction by a factor of 4 with well-maintained spatial resolution, while iterative reconstruction using total-variation regularization (TVR) degrades the spatial resolution at the same noise level. The proposed method achieves less than 1% measurement difference on electron density map compared with the conventional two-full-scan DECT. On an anthropomorphic pediatric phantom, our method successfully reconstructs the complicated vertebra structures and decomposes bone and soft tissue. Conclusion: We develop an effective method to reduce the number of views and therefore data acquisition in DECT. We show that SPIR-based DECT using one full scan and a second 10-view scan can provide high-quality DECT images and accurate electron density maps as conventional two-full-scan DECT.

60 APPLIED LIFE SCIENCES↗

Testing Hopkins’ Bioclimatic Law with PhenoCam data

We investigated the spatial and temporal patterns of vegetation phenology with phenometrics derived from PhenoCam imagery. Specifically, we evaluated the Bioclimatic Law proposed by Hopkins, which relates phenological transitions to latitude, longitude, and elevation. “Green-up” and “green-down” dates—representing the start and end of the annual cycles of vegetation activity—were estimated from measures of canopy greenness calculated from digital repeat photography. We used data from 65 deciduous broadleaf (DB) forest sites, 18 evergreen needleleaf (EN) forest sites, and 21 grassland (GR) sites. DB green-up dates were well correlated with mean annual temperature and varied along spatial gradients consistent with the Bioclimatic Law. Interannual variation in DB phenology was most strongly associated with temperature anomalies during a relatively narrow window of time. EN phenology was not well correlated with either climatic factors or spatial gradients, but similar to DB phenology, interannual variation was most closely associated with temperature anomalies. For GR sites, mean annual precipitation explained most of the spatial variation in the duration of vegetation activity, whereas both temperature and precipitation anomalies explained interannual variation in phenology. PhenoCam data provide an objective and consistent means by which spatial and temporal patterns in vegetation phenology can be investigated.

54 ENVIRONMENTAL SCIENCES↗

Regional CO2 and latent heat surface fluxes in the Southern Great Plains: Measurements, modeling, and scaling

Characterizing net ecosystem exchanges (NEE) of CO{sub 2} and sensible and latent heat fluxes in heterogeneous landscapes is difficult, yet critical given expected changes in climate and land use. We report here a measurement and modeling study designed to improve our understanding of surface to atmosphere gas exchanges under very heterogeneous land cover in the mostly agricultural U.S. Southern Great Plains (SGP). We combined three years of site-level, eddy covariance measurements in several of the dominant land cover types with regional-scale climate data from the distributed Mesonet stations and Next Generation Weather Radar precipitation measurements to calibrate a land surface model of trace gas and energy exchanges (isotope-enabled land surface model (ISOLSM)). Yearly variations in vegetation cover distributions were estimated from Moderate Resolution Imaging Spectroradiometer normalized difference vegetation index and compared to regional and subregional vegetation cover type estimates from the U.S. Department of Agriculture census. We first applied ISOLSM at a 250 m spatial scale to account for vegetation cover type and leaf area variations that occur on hundred meter scales. Because of computational constraints, we developed a subsampling scheme within 10 km 'macrocells' to perform these high-resolution simulations. We estimate that the Atmospheric Radiation Measurement Climate Research Facility SGP region net CO{sub 2} exchange with the local atmosphere was -240, -340, and -270 gC m{sup -2} yr{sup -1} (positive toward the atmosphere) in 2003, 2004, and 2005, respectively, with large seasonal variations. We also performed simulations using two scaling approaches at resolutions of 10, 30, 60, and 90 km. The scaling approach applied in current land surface models led to regional NEE biases of up to 50 and 20% in weekly and annual estimates, respectively. An important factor in causing these biases was the complex leaf area index (LAI) distribution within cover types. Biases in predicted weekly average regional latent heat fluxes were smaller than for NEE, but larger than for either ecosystem respiration or assimilation alone. However, spatial and diurnal variations of hundreds of W m{sup -2} in latent heat fluxes were common. We conclude that, in this heterogeneous system, characterizing vegetation cover type and LAI at the scale of spatial variation are necessary for accurate estimates of bottom-up, regional NEE and surface energy fluxes.

54 ENVIRONMENTAL SCIENCES↗

SU-E-T-354: Peak Temperature Ratio of TLD Glow Curves to Investigate the Spatial Dependence of LET in a Clinical Proton Beam

Purpose: Use the ratio of the two high temperature peaks (HTR) in TLD 700 glow curves to investigate spatial dependence of the linear energy transfer (LET) in proton beams. Studies show that the relative biological effectiveness (RBE) depends upon the physical dose as well as its spatial distribution. Although proton therapy uses a spatially invariant RBE of 1.1, studies suggest that the RBE increases in the distal edge of a spread out Bragg peak (SOBP) due to the increased LET. Methods: Glow curve studies in TLD 700 show that the 280 C temperature peak is more sensitive to LET radiation than the 210 C temperature peak. Therefore, the areas under the individual temperature peaks for TLDs irradiated in a proton beam normalized to the peak ratio for 6 MV photons are used to determine the HTR to obtain information on its LET. TLD 700 chips with dimensions 0.31×0.31×0.038 cc are irradiated with 90 MeV protons at varying depths in a specially designed blue wax phantom to investigate LET spatial dependence. Results: Five TLDs were placed at five different depths of the percent depth dose curve (PDD) of range 16.2 cm: center of the SOPB and approximately at the 99% distal edge, 90%, 75% and 25% of the PDD, respectively. HTR was 1.3 at the center of the SOBP and varied from 2.2 to 3.9 which can be related to an LET variation from 0.5 to 18 KeV/μ via calibration with radiation beams of varying LET. Conclusion: HTR data show a spatially invariant LET slightly greater than the 6 MV radiations in the SOBP, but a rapidly increasing LET at the end of the proton range. These results indicate a spatial variation in RBE with potential treatment consequences when selecting treatment margins to minimize the uncertainties in proton RBE.

07 ISOTOPE AND RADIATION SOURCES↗

Spatially resolved imaging of opto-electrical property variations

Systems and methods for opto electric properties are provided. A light source illuminates a sample. A reference detector senses light from the light source. A sample detector receives light from the sample. A positioning fixture allows for relative positioning of the sample or the light source with respect to each other. An electrical signal device measures the electrical properties of the sample. The reference detector, sample detector and electrical signal device provide information that may be processed to determine opto-electric properties of the same.

47 OTHER INSTRUMENTATION↗

Validation of spatiodemographic estimates produced through data fusion of small area census records and household microdata

Techniques such as Iterative Proportional Fitting have been previously suggested as a means to generate new data with the demographic granularity of individual surveys and the spatial granularity of small area tabulations of censuses and surveys. This article explores internal and external validation approaches for synthetic, small area, household- and individual-level microdata using a case study for Bangladesh. Using data from the Bangladesh Census 2011 and the Demographic and Health Survey, we produce estimates of infant mortality rate and other household attributes for small areas using a variation of an iterative proportional fitting method called P-MEDM. We conduct an internal validation to determine: whether the model accurately recreates the spatial variation of the input data, how each of the variables performed overall, and how the estimates compare to the published population totals. We conduct an external validation by comparing the estimates with indicators from the 2009 Multiple Indicator Cluster Survey (MICS) for Bangladesh to benchmark how well the estimates compared to a known dataset which was not used in the original model. The results indicate that the estimation process is viable for regions that are better represented in the microdata sample, but also revealed the possibility of strong overfitting in sparsely sampled sub-populations.

42 ENGINEERING↗

Spatial Distribution of Ultraviolet Emission from Cometary Activity at 67P/Churyumov-Gerasimenko

The Alice ultraviolet spectrograph on board the Rosetta orbiter provided the first near-nucleus ultraviolet observations of a cometary coma from arrival at comet 67P/Churyumov-Gerasimenko in 2014 August through 2016 September. The characterization of atomic and molecular emissions in the coma revealed the unexpected contribution of dissociative electron impact emission at large heliocentric distances and during some outbursts. This mechanism also proved useful for compositional analysis, and Alice observed many cases that suggested elevated levels of the supervolatile O{sub 2}, identifiable in part to their emissions resulting from dissociative electron impact. In this paper, we present the first two-dimensional UV maps constructed from Alice observations of atomic emission from 67P during an increase in cometary activity on 2015 November 7–8. Comparisons to observations of the background coma and an earlier collimated jet are used to describe possible changes to the near-nucleus coma and plasma. To verify the mapping method and place the Alice observations in context, comparisons to images derived from the MIRO and VIRTIS-H instruments are made. The spectra and maps we present show an increase in dissociative electron impact emission and an O{sub 2}/H{sub 2}O ratio of ~0.3 for the activity; these characteristics have been previously identified with cometary outbursts seen in Alice data. Further, UV maps following the increases in activity show the spatial extent and emission variation experienced by the near-nucleus coma, informing future UV observations of comets that lack the same spatial resolution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DIFFERENCE IN THE SPATIAL DISTRIBUTION BETWEEN H{sub 2}O AND CO{sub 2} ICES IN M 82 FOUND WITH AKARI

With AKARI, we obtain the spatially resolved near-infrared (NIR) (2.5-5.0 {mu}m) spectra for the nearby starburst galaxy M 82. These spectra clearly show absorption features due to interstellar ices. Based on the spectra, we created the column density maps of H{sub 2}O and CO{sub 2} ices. As a result, we find that the spatial distribution of H{sub 2}O ice is significantly different from that of CO{sub 2} ice; H{sub 2}O ice is widely distributed, while CO{sub 2} ice is concentrated near the galactic center. Our result reveals for the first time variations in CO{sub 2}/H{sub 2}O ice abundance ratio on a galactic scale, suggesting that an ice-forming interstellar environment changes within a galaxy. We discuss the cause of the spatial variations in the ice abundance ratio, utilizing spectral information on the hydrogen recombination Br{alpha} and Br{beta} lines and the polycyclic aromatic hydrocarbon 3.3 {mu}m emission appearing in the AKARI NIR spectra.

79 ASTRONOMY AND ASTROPHYSICS↗

Upscaling Methane Flux From Plot Level to Eddy Covariance Tower Domains in Five Alaskan Tundra Ecosystems

Spatial heterogeneity in methane (CH 4 ) flux requires a reliable upscaling approach to reach accurate regional CH 4 budgets in the Arctic tundra. In this study, we combined the CLM-Microbe model with three footprint algorithms to scale up CH 4 flux from a plot level to eddy covariance (EC) tower domains (200 m × 200 m) in the Alaska North Slope, for three sites in Utqiaġvik (US-Beo, US-Bes, and US-Brw), one in Atqasuk (US-Atq) and one in Ivotuk (US-Ivo), for a period of 2013–2015. Three footprint algorithms were the homogenous footprint (HF) that assumes even contribution of all grid cells, the gradient footprint (GF) that assumes gradually declining contribution from center grid cells to edges, and the dynamic footprint (DF) that considers the impacts of wind and heterogeneity of land surface. Simulated annual CH 4 flux was highly consistent with the EC measurements at US-Beo and US-Bes. In contrast, flux was overestimated at US-Brw, US-Atq, and US-Ivo due to the higher simulated CH 4 flux in early growing seasons. The simulated monthly CH 4 flux was consistent with EC measurements but with different accuracies among footprint algorithms. At US-Bes in September 2013, RMSE and NNSE were 0.002 μmol m −2 s −1 and 0.782 using the DF algorithm, but 0.007 μmol m −2 s −1 and 0.758 using HF and 0.007 μmol m −2 s −1 and 0.765 using GF, respectively. DF algorithm performed better than the HF and GF algorithms in capturing the temporal variation in daily CH 4 flux each month, while the model accuracy was similar among the three algorithms due to flat landscapes. Temporal variations in CH 4 flux during 2013–2015 were predominately explained by air temperature (67–74%), followed by precipitation (22–36%). Spatial heterogeneities in vegetation fraction and elevation dominated the spatial variations in CH 4 flux for all five tower domains despite relatively weak differences in simulated CH 4 flux among three footprint algorithms. The CLM-Microbe model can simulate CH 4 flux at both plot and landscape scales at a high temporal resolution, which should be applied to other landscapes. Integrating land surface models with an appropriate algorithm provides a powerful tool for upscaling CH 4 flux in terrestrial ecosystems.

54 ENVIRONMENTAL SCIENCES↗

Impact of Crystallographic Orientation Disorders on Electronic Heterogeneities in Metal Halide Perovskite Thin Films

Metal halide perovskite thin films have achieved remarkable performance in optoelectronic devices. To achieve higher device performance and reliability needed for wide-spread commercial deployment, spatial heterogeneity of optoelectronic properties in the perovskite thin films needs to be understood and controlled. However, clear identification of the causes underlying the heterogeneity has remained elusive. In this work, we employ a multimodal imaging approach to separate electronic heterogeneity from morphology variations in perovskite thin films. Our results reveal that disorders in the crystallographic orientation of grains and different surface terminations are the primary cause of the electronic heterogeneity. Therefore, a solution processed polycrystalline perovskite thin film with a negligible spatial variation in charge trap site density reaching that of single crystals can be achieved by minimizing crystallographic orientation disorder.

36 MATERIALS SCIENCE↗

Extrapolation Domains for Aggregating Environmental Outcomes from Local to Regional Levels

Billions of dollars are invested every year to run field experiments to quantify the response of crops to new technologies and associated environmental outcomes. Given the diversity of environments where crop production occurs, conducting these research studies without a robust framework for research site selection and upscaling results to larger spatial scales is inefficient. In this project, researchers from the University of Nebraska-Lincoln used their unique Technology Extrapolation Domains framework (TED) as a tool to guide the selection of experimental sites and as basis for aggregating and validating environmental outcomes from local to regional levels. In the present project, we first used the TED framework to evaluate the current distribution and area coverage of the current SMARTFARM sites. The purpose was to showcase how it is possible to use the TED framework to guide site selection and extrapolate results over space. Additionally, the original TED framework was expanded to account for other factors influencing environmental outcomes by inclusion of three additional variables: soil organic matter, soil texture, and topographic wetness index. The resulting expanded framework (TED-E) was validated using nitrogen (N) losses from corn in the United States as a case study. To do so, we used N balance as a proxy to N losses and we evaluated the capacity of the framework to explain variation in N balance across fields and across countries. We found that the TED-E has substantially higher predictive power than the original TED framework to explain spatial variation in N balance. However, improvements in predictive power with the TED-E tool come at the expense of a higher number of TEDs needed to achieve a given crop area coverage compared with the original TED framework. We conclude that the new TED-E framework can help aggregate and extrapolate environmental outcomes from research sites to regional levels and improve the visualization of their spatial patterns across the United States. An online version of the framework is available at: https://www.toolted.org/

54 ENVIRONMENTAL SCIENCES↗

Two-dimensional plasma density evolution local to the inversion layer during sawtooth crash events using Beam Emission Spectroscopy

Here, we present methods for analyzing Beam Emission Spectroscopy (BES) data to obtain the plasma density evolution associated with rapid sawtooth crash events at the DIII-D tokamak. BES allows coverage over a 2D spatial plane, inherently local measurements, with fast time responses, and, therefore, provides a valuable new channel for data during sawtooth events. A method is developed to remove sawtooth-induced edge-light pulses contained in the BES data. The edge light pulses appear to be from the D α emission produced by edge recycling during sawtooth events, and are large enough that traditional spectroscopic filtering and data analysis techniques are insufficient to deduce physically meaningful quantities. A cross-calibration of 64 BES channels is performed by using a novel method to ensure accurate measurements. For the large-amplitude density oscillations observed, we discuss and use the non-linear relationship between the BES signal δI/ I 0 and the plasma density variation δn e / n e0 . The 2D BES images cover an 8 × 20 cm 2 region around the sawtooth inversion layer and show large-amplitude density oscillations, with additional significant spatial variations across the inversion layer that grows and peaks near the time of the temperature crash. The edge light removal technique and method of converting large-amplitude δI/ I 0 to δn e / n e0 presented here may help analyze other impulsive MHD phenomena in tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Prominence mass supply and the cavity

A prevalent but untested paradigm is often used to describe the prominence-cavity system: the cavity is under-dense because it is evacuated by supplying mass to the condensed prominence. The thermal non-equilibrium (TNE) model of prominence formation offers a theoretical framework to predict the thermodynamic evolution of the prominence and the surrounding corona. We examine the evidence for a prominence-cavity connection by comparing the TNE model with diagnostics of dynamic extreme ultraviolet (EUV) emission surrounding the prominence, specifically prominence horns. Horns are correlated extensions of prominence plasma and coronal plasma which appear to connect the prominence and cavity. The TNE model predicts that large-scale brightenings will occur in the Solar Dynamics Observatory Atmospheric Imaging Assembly 171 Å bandpass near the prominence that are associated with the cooling phase of condensation formation. In our simulations, variations in the magnitude of footpoint heating lead to variations in the duration, spatial scale, and temporal offset between emission enhancements in the other EUV bandpasses. While these predictions match well a subset of the horn observations, the range of variations in the observed structures is not captured by the model. We discuss the implications of our one-dimensional loop simulations for the three-dimensional time-averaged equilibrium in the prominence and the cavity. Evidence suggests that horns are likely caused by condensing prominence plasma, but the larger question of whether this process produces a density-depleted cavity requires a more tightly constrained model of heating and better knowledge of the associated magnetic structure.

79 ASTRONOMY AND ASTROPHYSICS↗