Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Synthesis, morphology and optical properties of GaN and AlGaN semiconductor nanostructures

Hexagonal Gallium Nitride (GaN) and Aluminum Gallium Nitride (AlGaN) nanoparticles were synthesized by sol-gel method using Ethylene Diamine Tetra Acetic acid (EDTA) complex route. Powder X-ray diffraction (PXRD) analysis confirms the hexagonal wurtzite structure of GaN and Al{sub 0.25}Ga{sub 0.75}N nanoparticles. Surface morphology and elemental analysis were carried out by Scanning Electron Microscope (SEM) and Energy Dispersive X-ray spectroscopy (EDX). The room temperature Photoluminescence (PL) study shows the near band edge emission for GaN at 3.35 eV and at 3.59 eV for AlGaN nanoparticles. The Aluminum (Al) composition of 20% has been obtained from PL emission around 345 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Multiyear Gridded Data Ensemble of Surface Biogenic Carbon Fluxes for North America: Evaluation and Analysis of Results

Accurate and fine-scale estimates of biogenic carbon fluxes are critical for measuring and monitoring the biosphere's responses and feedback to the climate system. Currently available data products from flux towers and model-intercomparison projects struggle to adequately represent spatiotemporal dynamics of surface biogenic carbon fluxes, and to quantify their uncertainties, which also are crucial to atmospheric inversion systems. To address these gaps, we introduce a new perturbed-parameter model ensemble with the CASA model to estimate surface biogenic carbon fluxes at monthly and 3-hourly scales for North America at ~500-m and 5-km resolutions. We first use the Extended Fourier Amplitude Sensitivity Testing to choose the three most sensitive parameters to be perturbed, maximum light use efficiency (E max ), optimal temperature of photosynthesis (T opt ), and temperature response of respiration (Q 10 ). The initial range for each parameter is broadly sampled for the L1 ensemble, but then we pruned E max with site-level primary productivity to derive an L2 ensemble with narrower uncertainty ranges. Ensembles are strongly correlated with site-level results at both monthly and 3-hourly scales, and the spread across L1/L2 ensemble members encompasses the range of AmeriFlux observations. Monthly variability in the L2 ensemble mean is 85% of the observed variability. The L2 ensemble outperforms diverse data products with the highest Taylor skill scores at diurnal to annual scales. Finally, the ensemble's seasonality agrees well with other models for most biome types and in high and middle latitudes, but inconsistencies are found in subtropical and tropical ecoregions and for annual totals over North America.

54 ENVIRONMENTAL SCIENCES↗

Dynamics of electrified liquid metal surface using shallow water model

A shallow water model that incorporates surface tension and electric field effects is developed to investigate the dynamics of an electrified liquid surface. The computational model is verified against the Zakharov–Kuznetsov equation and is applied to study the growth and damping of the electrified liquid surface. A linear wave analysis is performed under a shallow water theory assuming an analytic solution of the electric field, similar to the Tonks–Frenkel instability. The electrified liquid surface grows or dampens based on the balance of the electric field, surface tension, and gravitational forces. As a result, the numerical results obtained from the electrified shallow water solver are in good agreement with the theoretical analysis.

Computational models↗

High efficiency 4H-SiC betavoltaic power sources using tritium radioisotopes

Realization of an 18.6% efficient 4H-silicon carbide (4H-SiC) large area betavoltaic power source using the radioisotope tritium is reported. A 200 nm 4H-SiC P{sup +}N junction is used to collect high-energy electrons. The electron source is a titanium tritide (TiH{sup 3}{sub x}) foil, or an integrated titanium tritide region formed by the diffusion of tritium into titanium. The specific activity of the source is directly measured. Dark current measured under short circuit conditions was less than 6.1 pA/cm{sup 2}. Samples measured with an external tritium foil produced an open circuit voltage of 2.09 V, short circuit current of 75.47 nA/cm{sup 2}, fill factor of 0.86, and power efficiency of 18.6%. Samples measured with an integrated source produced power efficiencies of 12%. Simulations were done to determine the beta spectrum (modified by self absorption) exiting the source and the electron hole pair generation function in the 4H-SiC. The electron-hole pair generation function in 4H-SiC was modeled as a Gaussian distribution, and a closed form solution of the continuity equation was used to analyze the cell performance. The effective surface recombination velocity in our samples was found to be 10{sup 5}–10{sup 6 }cm/s. Our analysis demonstrated that the surface recombination dominates the performance of a tritium betavoltaic device but that using a thin P{sup +}N junction structure can mitigate some of the negative effects.

07 ISOTOPE AND RADIATION SOURCES↗

The role of surface diffusion and wing tilt in the formation of localized stacking faults in high In-content InGaN MQW nanostructures

Yellow and green emitting multiple quantum well structures are grown on nanostripe templates with {10-11} facets. SEM and cathodoluminescence measurements show a correlation between rough surface morphology near the bottom of the stripes and non-radiative recombination centers. Transmission electron microscopy (TEM) analysis shows that these surface instabilities are a result of stacking faults generated from the quantum well (QW) regions near the bottom of the pyramid that propagate to the surface. HRTEM images show that the stacking faults are I{sub 1} type which is formed by removal of one half basal plane to relieve the compressive strain in the InGaN QW. Thicker QWs near the bottom as a result of growth rate enhancement due to the surface diffusion of the precursors from the mask regions cause increased strain. Additionally, the compressive strain induced by the bending of the nanostructure towards the growth mask further increases the strain experienced by the QW thereby causing the localized defect generation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization and Modeling of Materials for Kr-Xe Separations

We sought to identify practical adsorbents for the separation of Kr from Xe through pressure swing adsorption. We spent appreciable efforts on two categories of materials: metal-organic frameworks (MOFs) and zeolites. MOFs represent a new and exciting sorbent with numerous new framework topologies and surface chemistries. Zeolites are widely used and available commercial adsorbents. We have employed a combination of gas sorption analysis to analyze gas – surface interactions, computational modelling to both aid in interpreting experimental results and to predict practical adsorbents, and in-situ crystallographic studies to confirm specific experimental results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Identification of Distribution of Elastic Constants of SiC/SiC Braided Tubes

There has been considerable interest in chemical vapor infiltration (CVI) manufactured silicon carbide fiber and silicon carbide matrix (SiCf/SiCm) composite tubes due to their superior mechanical properties. There are many parameters in the manufacturing of SiCf/SiCm composite tubes such as elastic constants of constituent SiC fiber and SiC matrix, braiding angle, porosity, and others whose values vary over a range. A sensitivity analysis will be carried out to determine the dominant parameters among the abovementioned ones. We intend to determine the variability in elastic constants of SiCf/SiCm composite tubes considering the variability in dominant parameters. A chosen number of combinations of dominant variables will be sampled through Latin hypercube sampling (LHS) method. The elastic constants of composite tube namely Young's moduli in circumferential and longitudinal direction, Poisson's ratio and shear modulus will be calculated at sampled points through finite element (FE) analysis. A polynomial response surface (PRS) will be built for each of the elastic constants to be used a surrogate to FE analysis. once the predictive accuracy of PRS is verified at the validation set of data points, the PRS will be invoked 105 times in Monte Carlo simulations (MCS). The variability can be calculated based on MCS-generated data which will be presented at the conference.

42 ENGINEERING↗

A Study on the Temperature Correlation between a Surface of Dry Storage Canister and Spent Fuel Clad - 16446

Analysis of temperature correlation between dry canister surface and spent fuel cladding is performed in this study. The result shows that the spent fuel cladding temperature is possibly estimated using canister surface temperature in normal condition and the result of estimation is depended on analysis model. Two analysis models are designed by using a hypothetical spent fuel model and thermal analysis for the models is performed by using CFX(v11.0) code. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Temporal Coupling of Subsurface and Surface Soil CO 2 Fluxes: Insights From a Nonsteady State Model and Cross-Wavelet Coherence Analysis

Inferences about subsurface CO 2 fluxes often rely on surface soil respiration (R soil ) estimates because directly measuring subsurface microbial and root respiration (collectively, CO 2 production, S Total ), is difficult. To evaluate how well R soil serves as a proxy for S Total , we applied the nonsteady state DEconvolution of Temporally varying Ecosystem Carbon componenTs model (0.01-m vertical resolution), using 6-hourly data from a Wyoming grassland, in six simulations that cross three soil types (clay, sandy loam, and sandy) with two depth distributions of subsurface biota. We used cross-wavelet coherence analysis to examine temporal coherence (localized linear correlation) and offsets (lags) between S Total and R soil and fluxes and drivers (e.g., soil temperature and moisture). Cross-wavelet coherence revealed higher coherence between fluxes and drivers than linear regressions between concurrent variables. Soil texture and moisture exerted the strongest controls over coherence between CO 2 fluxes. Coherence between CO 2 fluxes in all soil types was strong at short (~1 day) and long periods (>8 days), but soil type controlled lags, and rainfall events decoupled the fluxes at periods of 1–8 days for several days in sandy soil, up to 1 week in sandy loam, and for a month or more in clay soil. Concentrating root and microbial biomass nearer the surface decreased lags in all soil types and increased coherence up to 10% in clay soil. The assumption of high temporal coherence between R soil and S Total is likely valid in dry, sandy soil, but may lead to underestimates of short-term STotal in semiarid grasslands with fine-grained and/or wet soil.

54 ENVIRONMENTAL SCIENCES↗

Surface Characterization of Populus during Caldicellulosiruptor bescii Growth by TOF-SIMS Analysis

Caldicellulosiruptor bescii is a thermophilic, anaerobic bacterium that is capable of utilizing unpretreated biomass in addition to breaking down cellulose and hemicellulose into simple sugars. Despite the fact that C. bescii must first bind to the surface of the biomass, there has been no analysis of the morphological or chemical changes to the biomass surface as a result of incubation with the micro-organism. To understand more about C. bescii growth, juvenile poplar stems were sectioned (80 μm thick) and incubated with C. bescii beyond the typical 24 h experiment length. Monitoring the cell counts during incubation revealed a biphasic growth pattern. The impact the micro-organism had on the surface was determined by scanning electron microscopy (SEM) and time-of-flight secondary ion mass spectrometry (ToF-SIMS), which showed physical crevices in the cell wall caused by the C. bescii along with a decrease of polysaccharide ions and an increase in lignin ions on the poplar surface. Employing infrared microspectroscopy, the decreasing trend was corroborated.

59 BASIC BIOLOGICAL SCIENCES↗

Biogeochemical Processes Responsible for the Enhanced Transport of Plutonium Under transient Unsaturated Ground Water Conditions

To better understand longer-term vadose zone transport in southeastern soils, field lysimeter experiments were conducted at the Savannah River Site (SRS) near Aiken, SC, in the 1980s. Each of the three lysimeters analyzed herein contained a filter paper spiked with different Pu solutions, and they were left exposed to natural environmental conditions (including the growth of annual weed grasses) for 11 years. The resulting Pu activity measurements from each lysimeter core showed anomalous activity distributions below the source, with significant migration of Pu above the source. Such results are not explainable by adsorption phenomena alone. A transient variably saturated flow model with root water uptake was developed and coupled to a soil reactive transport model. Somewhat surprisingly, the fully transient analysis showed results nearly identical to those of a much simpler steady flow analysis performed previously. However, all phenomena studied were unable to produce the upward Pu transport observed in the data. This result suggests another transport mechanism such as Pu uptake by roots and upward transport due to transpiration. Thus, the variably saturated flow and reactive transport model was extended to include uptake and transport of Pu within the root xylem, along with computational methodology and results. In the extended model, flow velocity in the soil was driven by precipitation input along with transpiration and drainage. Water uptake by the roots determined the flow velocity in the root xylem, and this along with uptake of Pu in the transpiration stream drove advection and dispersion of the two Pu species in the xylem. During wet periods with high potential evapotranspiration, maximum flow velocities through the xylem would approached 600 cm/hr, orders of magnitude larger that flow velocities in the soil. Values for parameters and the correct conceptual viewpoint for Pu transport in plant xylem was uncertain. This motivated further experiments devoted to Pu uptake by corn roots and xylem transport. Plants were started in wet paper wrapped around each corn seed. When the tap roots were sufficiently long, the seedlings were transplanted to a soil container with the tap root extending out the container bottom. The soil container was then placed over a nutrient solution container, and the solution served as an additional medium for root growth. To conduct an uptake study, a radioactive substance, such as Pu complexed with the bacterial siderophore DFOB, was added to the nutrient solution. After a suitable elapsed time, the corn plant was sacrificed, cut into 10 cm lengths, and the activity distribution measured. Experimental results clarified the basic nature of Pu uptake and transport in corn plants, and resulting simulations suggested that each growing season Pu in the SRS lysimeters would move into the plant shoots and be deposited on the soil surface during the Fall dieback. Subsequent isotope ratio analyses showed that this did happen. OVERALL RESULTS AND CONCLUSIONS - (1) Pu transport downward from the source is controlled by advection, dispersion and adsorption, along with surface-mediated REDOX reactions. (2) Hysteresis, extreme root distribution functions, air-content dependent oxidation rate constants, and large evaporation rates from the soil surface were not able to explain the observed upward migration of Pu. (3) Small amounts of Pu uptake by plant roots and translocation in the transpiration stream creates a realistic mechanism for upward Pu migration (4) Realistic xylem cross-sectional areas imply high flow velocities under hot, wet conditions. Such flow velocities produce the correct shape for the observed activity distributions in the top 20 cm of the lysimeter soil. (5) Simulations imply that Pu should have moved into the above-ground grass tissue each year during the duration of the experiments, resulting in an activity residual accumulating on the soil surface. An isotope ratio analysis showed that the observed surface Pu residue was from the buried sources, not atmospheric fallout. (6) The plant experiments indicate a Pu-DFOB velocity in the corn xylem of at least 174 cm/hr, much higher than ionic Pu in soil. Thus, Pu complexation with chelating agents is probably what led to the observed enhanced uptake and mobility in grasses. (7) Plant experiments show that the uptake of Fe-DFOB, Pu-DFOB and the resulting distributions are very similar. This supports the hypothesis that plant and bacterial iron-seeking chemistry mistakes Pu for Fe.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Analysis of Tank 38H (HTF-38-15-119, 127) Surface, Subsurface and Tank 43H (HTF-43-15-116, 117 and 118) Surface, Feed Pump Suction and Jet Suction Subsurface Supernatant Samples in Support of Enrichment, Corrosion Control and Salt Batch Planning Programs

Compositional feed limits have been established to ensure that a nuclear criticality event for the 2H and 3H Evaporators is not possible. The Enrichment Control Program (ECP) requires feed sampling to determine the equivalent enriched uranium content prior to transfer of waste other than recycle transfers (requires sampling to determine the equivalent enriched uranium at two locations in Tanks 38H and 43H every 26 weeks) The Corrosion Control Program (CCP) establishes concentration and temperature limits for key constituents and periodic sampling and analysis to confirm that waste supernate is within these limits. This report provides the results of analyses on Tanks 38H and 43H surface and subsurface supernatant liquid samples in support of the ECP, the CCP, and the Salt Batch 10 Planning Program.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Surface wind energy trends near Taiwan in winter since 1871

The tropical surface wind speed in boreal winter reaches a maximum near Taiwan. This stable wind resource may be used for future clean energy development. How this surface wind energy source has changed in past 141 years is investigated using the 20 th century reanalysis dataset and CMIP5 models. Our observational analysis shows that the surface wind speed experienced a weakening trend in the past 141 years (1871 - 2010). The average decreasing rate is around -1.4 m s -1 per century. The decrease is primarily attributed to the relative sea surface temperature (SST) cooling in the subtropical North Pacific, which forces a large-scale low-level anti-cyclonic circulation anomaly in situ and is thus responsible for the southerly trend near Taiwan. The relative SST trend pattern is attributed mainly to the greenhouse gas effect associated with anthropogenic activities. The southerly trend near Taiwan is more pronounced in the boreal winter than in summer. Such seasonal difference is attributed to the reversed seasonal mean wind, which promotes more efficient positive feedback in the boreal winter. The CMIP5 historical run analysis reveals that climate models capture less SST warming and large-scale anti-cyclonic circulation in the subtropical North Pacific, but the simulated weakening trend of the surface wind speed near Taiwan is too small.

17 WIND ENERGY↗

The Role of Non-Local Effects on Surface Sensible Heat Flux Under Different Types of Thermal Structures Over the Arctic Sea-Ice Surface

The effects of atmospheric thermal structure on the surface energy flux are poorly understood over the Arctic sea-ice surface. Here, we explore the mechanism of sensible heat exchange under different types of thermal structures over the Arctic sea-ice surface by using data collected during the Multidisciplinary drifting Observatory for the Study of Arctic Climate expedition. The quadrant analysis indicates that strong surface temperature inversions below 100 m enhance non-local effects on the positive (upward) sensible heat flux ($\overline{w'θ'}$) through entrainment of large eddies from the convective boundary layer aloft. However, strong surface inversions restrict the contributions of large eddies to the negative (downward) $\overline{w'θ'}$ due to intensified surface stability. By inspecting the existing parameterization schemes, we found that the European Center for Medium-Range Weather Forecasts Integrated Forecasting System scheme fails to predict the impacts of non-local processes on the positive $\overline{w'θ'}$, and an adjustment term to correct the bias of parameterized $\overline{w'θ'}$ is proposed.

54 ENVIRONMENTAL SCIENCES↗

XPS guide: Charge neutralization and binding energy referencing for insulating samples

This guide deals with methods to control surface charging during XPS analysis of insulating samples and approaches to extracting useful binding energy information. Furthermore, the guide summarizes the causes of surface charging, how to recognize when it occurs, approaches to minimize charge buildup, and methods used to adjust or correct XPS photoelectron binding energies when charge control systems are used. Additionally, there are multiple ways to control surface charge buildup during XPS measurements and examples of systems on advanced XPS instruments are described. There is no single, simple, and foolproof way to extract binding energies on insulating material, but advantages and limitations of several approaches are described. Because of the variety of approaches and limitations of each it is critical for researchers to accurately describe the procedures that have been applied in research reports and publications.

47 OTHER INSTRUMENTATION↗

Mach Conference, 2022.

There has been considerable interest in chemical vapor infiltration (CVI) manufactured silicon carbide fiber and silicon carbide matrix (SiC/SiC) composite tubes due to their superior mechanical properties. The SiC/SiC tubes are known to remain stable even after prolonged exposure to radiation. However, there are many variables in the manufacturing of SiC/SiC composite tubes such as elastic constants of constituent SiC fiber and SiC matrix, braiding angle, porosity, and others whose values vary over a range. The intention is to identify the distribution of elastic constants of SiC/SiC tubes which would help model the performance of the novel cladding material. To do so, a sensitivity analysis will be carried out to determine the dominant variables that influence the elastic constants of SiC/SiC tubes. A chosen number of combinations of dominant variables will be sampled through the Latin hypercube sampling (LHS) method. The elastic constants of composite tube namely Young's moduli in the circumferential and longitudinal direction, Poisson's ratio, and shear modulus will be calculated at sampled points through finite element (FE) analysis. A polynomial response surface (PRS) will be built for each of the elastic constants to be used as a surrogate to FE analysis. Once the predictive accuracy of PRS is verified at the validation set of data points, the PRS will be invoked 105 times in Monte Carlo simulations (MCS). The uncertainty can be quantified by calculating the coefficient of variation (CV) based on MCS-generated data which will be presented at the conference.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Process Image Analysis using Big Data, Machine Learning, and Computer Vision

Within the DOE complex, 3013 canisters are used to store Pu-bearing waste. Wall penetration due to corrosion, specifically stress corrosion cracking, is considered to be the most likely cause of failure over the 50-year lifetime of the canisters. This project has 2 objectives: The first is the development of machine learning algorithms to identify the presence of corrosion from a very large set of images generated by laser confocal microscope scanning of 3013 canister used to store Pu oxides. This portion of the LDRD constitutes image analysis of a metal surface for the presence of corrosion. The image processing algorithms developed for this project will provide a suitable basis for analysis of other types of corrosion data, which can be produced in vast quantities using modern devices. The second component of the LDRD consists of the development of machine learning algorithms that obtain molecular mechanics force-fields from ab-initio Density Functional Theory (DFT) calculations for corrosive attack by chlorides on 304L or 316L stainless steel. The goal of this latter component is to determine means for mitigating corrosion on a fundamental level, including coatings, welding methods, metal composition, etc. Force-field modeling is necessary for this endeavor because the incipience and progression of corrosion is the governed by molecular structures, grain boundaries, dislocations and surface structures represented by large numbers of atoms. Although DFT calculations are extremely adept at describing molecular scale processes, they are computationally expensive making them ill-suited for calculations of more than several hundred atoms, especially for the repeated applications inherent in material design. Fortunately, force-field methods provide an avenue for viable molecular-scale calculations involving the numbers of atoms involved in corrosion processes. The accuracy of the force-field calculations depends strongly on the accuracy of the force-field model, which is extremely difficult and time-consuming to derive from either data or ab-initio calculations. The use of machine learning algorithms has the potential to make the calculation of force-fields much more efficient but has not been explored significantly for corrosion processes. If shown to be viable, the technique would have wide -ranging impact on design of corrosion resistant materials and on the mitigation of corrosion in existing process systems.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Transient analysis of advancing contact angle measurements on polished rock surfaces

We report that contact angle measurements for gas-liquid-rock systems are important for modeling multi-phase flow and transport in the subsurface. These data are needed in applications such as the extraction of oil and gas resources, geologic sequestration of carbon dioxide, contaminant fate and transport, and aquifer recharge through the vadose zone. Contact angles are frequently measured with the sessile drop method. Previous research has largely ignored the dynamic behavior of sessile droplets on geologic materials. This study investigates the dynamic behavior of sessile water droplets on prepared rock surfaces in the presence of air. Droplet diameter and advancing contact angle were determined at 0.5 s intervals for ~90 s on flat polished disks of Burlington limestone, Crossville sandstone, Mancos shale, Sierra White granite, Vermilion Bay granite, and Westerly granite using a Krüss DSA 30 Drop Shape Analyzer. The droplet diameter and advancing contact angle data sets were nonlinearly regressed against time using two different two-parameter models. The median coefficients of determination for the fits were 0.85 and 0.96, respectively. The resulting parameter estimates were used to compute the apparent equilibrium contact angle, θ e , for each disk following droplet diameter stabilization. Estimates of θ e ranged from 37.2° for Mancos shale to 75.6° for Burlington limestone. Analysis of variance indicated statistically significant differences in θ e between the rock types at the 95% confidence level. The variability of θe on the polished rock surfaces, as quantified by the coefficient of variation (CV) for θ e , varied between ~3 and ~9%; there were no significant differences in CV between the rock types. Neutron radiography indicated changes droplet morphology over time were due to the spontaneous imbibition of water into the rock matrix. Finally, the transient analysis employed in this study permits a more meaningful estimate of the equilibrium contact angle for rocks than taking the initial value or averaging over time as is frequently done.

58 GEOSCIENCES↗