Search NASA⌕ Search

SEARCH · Search NASA

Results for “BOX MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Coordination of Behind-the-Meter Energy Storage and Building Loads: Optimization with Deep Learning Models*

With the increasing penetration of renewable energy systems and energy storage systems in buildings, it is critical to optimize system operation. In this paper, we develop an optimization strategy to minimize the operation cost as well as maintain indoor thermal comfort, for a building integrated with battery and PV. A Recurrent Neural Network (RNN) is used to predict building thermal load and zone temperatures. A black-box optimization algorithm known as nonlinear optimization by mesh adaptive direct search (NOMADS) is employed in simulation to provide look-ahead optimal battery dispatch and zone temperature set-point schedules so that the operation cost is minimized. Field data collected from a medium sized office building at Pacific Northwest National Laboratory (PNNL) integrated with Photovoltaic (PV) system model and battery storage system model is used to demonstrate the proposed methodology. Compared with rule based methods, the optimization strategy obtained a lower cost of operation while satisfying comfort constraints.

Chen, Yimin↗
DOE OSTI2025

Emulating the Lyman-Alpha forest 1D power spectrum from cosmological simulations: new models and constraints from the eBOSS measurement

We present the Lyssa suite of high-resolution cosmological simulations of the Lyman-α forest designed for cosmological analyses. These 18 simulations have been run using the Nyx code with 40963 hydrodynamical cells in a 120 Mpc (∼ 81 Mpc/h) comoving box and individually provide sub-percent level convergence of the Lyman-α forest 1d flux power spectrum. We build a Gaussian process emulator for the Lyssa simulations in the lym1d likelihood framework to interpolate the power spectrum at arbitrary parameter values. We validate this emulator based on leave-one-out tests and based on the parameter constraints for simulations outside of the training set. We also perform comparisons with a previous emulator, showing a percent level accuracy and a good recovery of the expected cosmological parameters. Using this emulator we derive constraints on the linear matter power spectrum amplitude and slope parameters A Lyα and n Lyα . While the best-fit Planck ΛCDM model has A Lyα = 8.79 and n Lyα = -2.363, from DR14 eBOSS data we find that A Lyα < 7.6 (95% CI) and n Lyα = -2.369 ± 0.008. The low value of A Lyα , in tension with Planck, is driven by the correlation of this parameter with the mean transmission of the Lyman-α forest. This tension disappears when imposing a well-motivated external prior on this mean transmission, in which case we find A Lyα = 9.8 ± 1.1 in accordance with Planck.

Walther, Michael↗
DOE OSTI2015

Nonlinear radiative heat transfer and Hall effects on a viscous fluid in a semi-porous curved channel

In this paper, effects of Hall currents and nonlinear radiative heat transfer in a viscous fluid passing through a semi-porous curved channel coiled in a circle of radius R are analyzed. A curvilinear coordinate system is used to develop the mathematical model of the considered problem in the form partial differential equations. Similarity solutions of the governing boundary value problems are obtained numerically using shooting method. The results are also validated with the well-known finite difference technique known as the Keller-Box method. The analysis of the involved pertinent parameters on the velocity and temperature distributions is presented through graphs and tables.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2013

THE AGE-METALLICITY RELATIONSHIP OF THE LARGE MAGELLANIC CLOUD FIELD STAR POPULATION FROM WIDE-FIELD WASHINGTON PHOTOMETRY

We analyze age and metallicity estimates for an unprecedented database of some 5.5 million stars distributed throughout the Large Magellanic Cloud (LMC) main body, obtained from CCD Washington CT{sub 1} photometry, reported on in Piatti et al. We produce a comprehensive field star age-metallicity relationship (AMR) from the earliest epoch until {approx}1 Gyr ago. This AMR reveals that the LMC has not evolved chemically as either a closed-box or bursting system, exclusively, but as a combination of both scenarios that have varied in relative strength over the lifetime of the galaxy, although the bursting model falls closer to the data in general. Furthermore, while old and metal-poor field stars have been preferentially formed in the outer disk, younger and more metal-rich stars have mostly been formed in the inner disk, confirming an outside-in formation. We provide evidence for the formation of stars between 5 and 12 Gyr, during the cluster age gap, although chemical enrichment during this period was minimal. We find no significant metallicity gradient in the LMC. We also find that the range in the metallicity of an LMC field has varied during the lifetime of the LMC. In particular, we find only a small range of the metal abundance in the outer disk fields, whereas an average range of {Delta}[Fe/H] = +0.3 {+-} 0.1 dex appears in the inner disk fields. Finally, the cluster and field AMRs show a satisfactory match only for the last 3 Gyr, while for the oldest ages (>11 Gyr), the cluster AMR is a remarkable lower envelope to the field AMR. Such a difference may be due to the very rapid early chemical evolution and lack of observed field stars in this regime, whereas the globular clusters are easily studied. This large difference is not easy to explain as coming from stripped ancient Small Magellanic Cloud (SMC) clusters, although the field SMC AMR is on average {approx}0.4 dex more metal-poor at all ages than that of the LMC but otherwise very similar.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Alignments between Galaxies and the Cosmic Web at z ~ 1–2 in the IllustrisTNG Simulations

Galaxy formation theories predict that galaxy shapes and angular momenta have nonrandom alignments with the cosmic web. This leads to so-called intrinsic alignment between pairs of galaxies, which is important to quantify as a nuisance parameter for weak lensing. We study galaxy–cosmic web alignment in the IllustrisTNG suite of hydrodynamical simulations at redshifts 1 and 2, finding that alignment trends are consistent with previous studies. However, we find that the magnitude of the spin alignment signal is ~2.4× weaker than seen in previous studies of the Horizon-AGN simulation, suggesting that this signal may have a significant dependence on subgrid physics. Based on IllustrisTNG, we then construct mock observational spectroscopic surveys that can probe shape–cosmic web alignment at z ~ 1–2, modeled on the low-z galaxy redshift and IGM tomography surveys on the upcoming Subaru Prime Focus Spectrograph Galaxy Evolution (PFS GE) survey. However, even over box sizes of L = 205 h -1 Mpc, we find that global anisotropies induce a sample variance in the 2D projected alignment signal that depend on the projected direction; this induces significant errors in the observed alignment. We predict a 5.3σ detection of IllustrisTNG's shape alignment signal at z ~ 1 from Subaru PFS GE, although a detection would be challenging at z ~ 2. However, a rough rescaling of the relative alignment signal strengths between the TNG and Horizon-AGN simulations suggests that PFS GE should be able to more easily constrain the latter's stronger signal.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1975

An investigation of turbulent transport in the extreme lower atmosphere

A model in which the Lagrangian autocorrelation is expressed by a domain integral over a set of usual Eulerian autocorrelations acquired concurrently at all points within a turbulence box is proposed along with a method for ascertaining the statistical stationarity of turbulent velocity by creating an equivalent ensemble to investigate the flow in the extreme lower atmosphere. Simultaneous measurements of turbulent velocity on a turbulence line along the wake axis were carried out utilizing a longitudinal array of five hot-wire anemometers remotely operated. The stationarity test revealed that the turbulent velocity is approximated as a realization of a weakly self-stationary random process. Based on the Lagrangian autocorrelation it is found that: (1) large diffusion time predominated; (2) ratios of Lagrangian to Eulerian time and spatial scales were smaller than unity; and, (3) short and long diffusion time scales and diffusion spatial scales were constrained within their Eulerian counterparts.

Koper, C. A., Jr.↗
NASA NTRS1992

Severe new limits on extragalactic models of gamma-ray bursts

A new and much more restrictive limit is imposed here on the distance of gamma ray bursts (GRBs) in extragalactic models of the bursts. This limit is based on the fact that deep optical and infrared surveys do not find any host galaxies in many GRB error boxes. It is shown that 10 of the brighter GRB sources must be farther than 1 gigaparsec and that eight of these must emit more than 10 exp 13 ergs during a burst. This result is about four orders of magnitude stricter in energy than the previous limit. Five of the sources have limits in that the energy must be greater than the binding energy of a neutron star.

Schaefer, Bradley E.↗
NASA NTRS2010

Propulsion Technology Lifecycle Operational Analysis

The paper presents the results of a focused effort performed by the members of the Space Propulsion Synergy Team (SPST) Functional Requirements Sub-team to develop propulsion data to support Advanced Technology Lifecycle Analysis System (ATLAS). This is a spreadsheet application to analyze the impact of technology decisions at a system-of-systems level. Results are summarized in an Excel workbook we call the Technology Tool Box (TTB). The TTB provides data for technology performance, operations, and programmatic parameters in the form of a library of technical information to support analysis tools and/or models. The lifecycle of technologies can be analyzed from this data and particularly useful for system operations involving long running missions. The propulsion technologies in this paper are listed against Chemical Rocket Engines in a Work Breakdown Structure (WBS) format. The overall effort involved establishing four elements: (1) A general purpose Functional System Breakdown Structure (FSBS). (2) Operational Requirements for Rocket Engines. (3) Technology Metric Values associated with Operating Systems (4) Work Breakdown Structure (WBS) of Chemical Rocket Engines The list of Chemical Rocket Engines identified in the WBS is by no means complete. It is planned to update the TTB with a more complete list of available Chemical Rocket Engines for United States (US) engines and add the Foreign rocket engines to the WBS which are available to NASA and the Aerospace Industry. The Operational Technology Metric Values were derived by the SPST Sub-team in the form of the TTB and establishes a database for users to help evaluate and establish the technology level of each Chemical Rocket Engine in the database. The Technology Metric Values will serve as a guide to help determine which rocket engine to invest technology money in for future development.

Robinson, John W.↗
NASA NTRSDate not supplied

A Simplified Model of VIPER Thermal Management System. Part II: Integrated Vehicle

NASA’s Volatiles Investigating Polar Exploration Rover (VIPER) thermal management system (TMS) relies on four loop heat pipes (LHPs) to transport electronic waste heat to the vehicle cooling radiative surface and avoid overheating. The TMS has also ten constant conductance heat pipes (CCHPs) dedicated to balance the thermal load within the internal environment where the avionics boxes are mounted, also called warm electronic box (WEB), and to transport the heat from two of the science payload instruments. The TMS also uses two thermal straps to thermally link the batteries to the WEB. These thermal components, in addition to heaters, thermostat, multi-layer insulation (MLIs), and isolators forms the core of the VIPER TMS. The complex heat transport balance managed by the TMS is challenging to characterize and model. The more fidelity and granularity of a model, the more costly the computational resources needed and the longer the simulation and modeling time. When the priority is to provide quick but reliable assessments of the thermal performance or real time thermal feedback for training of console operators, simplified modeling tools are needed. To satisfy that need, this paper describes the effort to develop and correlate a model of VIPER TMS based on control volume approach. The correlation effort in particular focuses on hibernation, cold thermal balance, and hot thermal balance data from the integrated vehicle thermal vacuum (TVAC) test. Thus, the correlated model captures the heat leaks during hibernations and the performance at two extremes, bounding, operating scenarios.

Loop Heat Pipe↗
NASA NTRSDate not supplied

A Simplified Model of VIPER Thermal Management System. Part II: Integrated Vehicle

NASA’s Volatiles Investigating Polar Exploration Rover (VIPER) thermal management system (TMS) relies on four loop heat pipes (LHPs) to transport electronic waste heat to the vehicle cooling radiative surface and avoid overheating. The TMS has also ten constant conductance heat pipes (CCHPs) dedicated to balance the thermal load within the internal environment where the avionics boxes are mounted, also called warm electronic box (WEB), and to transport the heat from two of the science payload instruments. The TMS also uses two thermal straps to thermally link the batteries to the WEB. These thermal components, in addition to heaters, thermostat, multi-layer insulation (MLIs), and isolators forms the core of the VIPER TMS. The complex heat transport balance managed by the TMS is challenging to characterize and model. The more fidelity and granularity of a model, the more costly the computational resources needed and the longer the simulation and modeling time. When the priority is to provide quick but reliable assessments of the thermal performance or real time thermal feedback for training of console operators, simplified modeling tools are needed. To satisfy that need, this paper describes the effort to develop and correlate a model of VIPER TMS based on control volume approach. The correlation effort in particular focuses on hibernation, cold thermal balance, and hot thermal balance data from the integrated vehicle thermal vacuum (TVAC) test. Thus, the correlated model captures the heat leaks during hibernations and the performance at two extremes, bounding, operating scenarios.

Thermal Modeling↗
DOE OSTI2018

Lepton non-universality in B decays and fermion mass structure

We consider the possibility that the neutral-current B anomalies are due to radiative corrections generated by Yukawa interactions of quarks and leptons with new vector-like quark and lepton electroweak doublets and new Standard Model singlet scalars. We show that the restricted interactions needed can result from an underlying Abelian family symmetry and that the same symmetry can give rise to an acceptable pattern of quark and charged lepton masses and mixings, providing a bridge between the non-universality observed in the B-sector and that of the fermion mass matrices. We construct two simple models, one with a single singlet scalar in which the flavour changing comes from quark and lepton mixing and one with an additional scalar in which the flavour changing can come from both fermion and scalar mixing. We show that for the case the new quarks are much heavier than the new leptons and scalars the B anomalies can be due to box diagrams with couplings in the perturbative regime consistent with the bounds coming from $B_8-\overline{B}_8, K-\overline{K}$ and $D-\overline{D}$ mixing as well as other lepton family number violating processes. The new states can be dark matter candidates and, in the two scalar model with a light scalar of O(60) GeV and vector-like lepton of O(100) GeV, there can be a simultaneous explanation of the B-anomalies, the muon anomalous magnetic moment and the dark matter abundance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Plant Root Exudates Increase Methane Emissions through Direct and Indirect Pathways

The largest natural source of CH4 to the atmosphere is wetlands, which produce 20% to 50% of total global emissions. Vascular plants play a key role regulating wetland CH4 emissions through multiple mechanisms. They often contain aerenchymatous tissues which act as a diffusive pathway for CH4 to travel from the anoxic soil to the atmosphere and for O2 to diffuse into the soil and enable methanotrophy. Plants also exude carbon from their roots which stimulates microbial activity and fuels methanogenesis. This study investigated these mechanisms in a laboratory experiment utilizing rootboxes containing either Carex aquatilis plants, silicone tubes that simulated aerenchymatous gas transfer, or only soil as a control. CH4 emissions were far greater from planted boxes than from control boxes or simulated plants, indicating that the physical transport pathway of aerenchyma was of little importance when not paired with other effects of plant biology. Plants were exposed to 13CO2 at two time-points and subsequent enrichment of root tissue, rhizosphere soil, and emitted CH4 was used in an isotope mixing model to determine the proportion of plant-derived versus soil-derived carbon supporting methanogenesis. Results showed that carbon exuded by plants was converted to CH4 but that plants also increased emission of soil-derived carbon relative to the other experimental treatments. This result signifies that plants and root exudates altered the soil chemical environment and microbial community such that microbial utilization of soil carbon was increased (e.g. microbial priming) and/or oxidation of soil-derived CH4 was decreased (e.g., by microbial competition for oxygen).

methane, wetlands, microbial priming, root exudate↗
DOE OSTI2021

Genetic background influences the effect of thirdhand smoke exposure on anxiety and memory in Collaborative Cross mice

Growing evidence indicates that thirdhand smoke (THS) exposure induces many adverse health effects. However, it is unclear how THS exposure affects behavior and how host genetic background modulates phenotypic changes. Here we used the Collaborative Cross (CC) mouse population-based model to assess behavioral alterations immediately after THS exposure from 4 to 9 weeks of age. We first measured anxiety-like behavior in six strains using light/dark box combined with a custom multivariate mouse tracking system. We developed an anxiety risk scoring system based on anxiety-related traits and then evaluated the THS impact on them. THS exposure significantly decreased anxiety risk in CC019 ( P = 0.002) and CC051 ( P = 0.009), but increased anxiety risk in CC036 ( P < 0.001), while the other three strains did not show significant changes in anxiety-related traits. Such differences were driven by female mice for the six measures of anxiety-like behavior. Memory potential was measured in the same cohort of mice using the passive avoidance assay. Both THS-exposed male and female CC019 mice displayed significant memory loss compared to controls while no significant changes were found in the other five strains. This study provides strong evidence that THS exposure leads to strain-dependent changes in anxiety-like behavior and memory, suggesting that host genetic variations play a critical role in individual susceptibility to THS-induced effects.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2013

Excited electronic states from a variational approach based on symmetry-projected Hartree–Fock configurations

Recent work from our research group has demonstrated that symmetry-projected Hartree–Fock (HF) methods provide a compact representation of molecular ground state wavefunctions based on a superposition of non-orthogonal Slater determinants. The symmetry-projected ansatz can account for static correlations in a computationally efficient way. Here we present a variational extension of this methodology applicable to excited states of the same symmetry as the ground state. Benchmark calculations on the C{sub 2} dimer with a modest basis set, which allows comparison with full configuration interaction results, indicate that this extension provides a high quality description of the low-lying spectrum for the entire dissociation profile. We apply the same methodology to obtain the full low-lying vertical excitation spectrum of formaldehyde, in good agreement with available theoretical and experimental data, as well as to a challenging model C{sub 2v} insertion pathway for BeH{sub 2}. The variational excited state methodology developed in this work has two remarkable traits: it is fully black-box and will be applicable to fairly large systems thanks to its mean-field computational cost.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1977

Thermal performance evaluation of Solar Energy Products Company (SEPCO) 'Soloron' collector tested outdoors

The test article, Model EF-212, Serial Nr. 002, is a single glazed collector with a nonselective absorber plate, using flowing air as the heat transfer medium. The absorber plate and box frame are aluminum and the insulation is one inch isocyanurate foam board with thermal conductivity of 0.11 (BTU/sq ft Hr0/ft.) The tests included the following. (1) time constant test, (2) collector efficiency test, (3) collector stagnation test, (4) incident angle modifier test, (5) load test, (6) weathering test, and (7) absorber plate optical properties test. The results of these tests are tabulated, graphed, or otherwise recorded.

Chiou, J., Sr.↗
NASA NTRS2004

Wave Propagation in 2-D Granular Matrix and Dust Mitigation of Fabrics for Space Exploration Mission

Wave Propagation study is essential to exploring the soil on Mars or Moon and Dust Mitigation is a necessity in terms of crew's health in exploration missions. The study of Dust Mitigation has a significant impact on the crew s health when astronauts track dust back into their living space after exploration trips. We are trying to use piezoelectric fiber to create waves and vibrations at certain critical frequencies and amplitudes so that we can shake the particles off from the astronaut s fabrics. By shaking off the dust and removing it, the astronauts no longer have to worry about breathing in small and possibly hazardous materials, when they are back in their living quarters. The Wave Propagation in 2-D Granular Matrix studies how the individual particles interact with each other when a pressure wave travels through the matrix. This experiment allows us to understand how wave propagates through soils and other materials. By knowing the details about the interactions of particles when they act as a medium for waves, we can better understand how wave propagates through soils and other materials. With this experiment, we can study how less gravity effects the wave propagation and hence device a way to study soils in space and on Moon or Mars. Some scientists treat the medium that waves travel through as a "black box", they did not pay much attention to how individual particles act as wave travels through them. With this data, I believe that we can use it to model ways to measure the properties of different materials such as density and composition. In order to study how the particles interact with each other, I have continued Juan Agui's experiment of the effects of impacts on a 2-D matrix. By controlling the inputs and measuring the outputs of the system, I will be able to study now the particles in that system interact with each other. I will also try to model this with the software called PFC2D in order to obtain theoretical data to compare with the experiment. PFC2D is a program that allows the user to control the number of particle's characteristic, and the environment of the particle. With this I can run simulations that mimic the impulse test. This software uses a language called FISH, probably created by the creator of the software. This means that in order to model anything, one must use the command terminal instead of GUI's. I will also use this program to simulate the Moon/Mars simulate adhering to the fabric for the Dust Mitigation project. My goals for this summer are just to complete preliminary studies of the feasibility of the Shaking Fabric, learn the PFC-2D program, and to complete building and testing the wave propagation experiment.

Thanh, Phi Hung X.↗
NASA NTRS2011

Impact of Lightning-NO Emissions on Summertime U.S. Photochemistry as Determined Using the CMAQ Model with NLDN-Constrained Flash Rates

Lightning-NO emissions are responsible for 15-30 ppbv enhancements in upper tropospheric ozone over the eastern United States during the summer time. Enhancements vary from year to year but were particularly large during the summer of 2006, a period during which meteorological conditions were particularly conducive to ozone formation. A lightning-NO parameterization has been developed that can be used with the CMAQ model. Lightning-NO emissions in this scheme are assumed to be proportional to convective precipitation rate and scaled so that monthly average flash rates in each grid box match National Lightning Detection Network (NLDN) observed flash rates after adjusting for climatological intracloud to cloud-to-ground (IC/CG) ratios. The contribution of lightning-NO emissions to eastern United States NOx and ozone distributions during the summer of 2006 will be evaluated by comparing results of 12- km CMAQ simulations with and without lightning-NO emissions to measurements from the IONS field campaign and to satellite retrievals from the Tropospheric Emission Spectrometer (TES) and the Ozone Monitoring Instrument (OMI) aboard the Aura satellite. Special attention will be paid to the impact of the assumed vertical distribution of emissions on upper tropospheric NOx and ozone amounts.

Allen, Dale↗
NASA NTRS2015

A Modeling Pattern for Layered System Interfaces

Communications between systems is often initially represented at a single, high level of abstraction, a link between components. During design evolution it is usually necessary to elaborate the interface model, defining it from several different, related viewpoints and levels of abstraction. This paper presents a pattern to model such multi-layered interface architectures simply and efficiently, in a way that supports expression of technical complexity, interfaces and behavior, and analysis of complexity. Each viewpoint and layer of abstraction has its own properties and behaviors. System elements are logically connected both horizontally along the communication path, and vertically across the different layers of protocols. The performance of upper layers depends on the performance of lower layers, yet the implementation of lower layers is intentionally opaque to upper layers. Upper layers are hidden from lower layers except as sources and sinks of data. The system elements may not be linked directly at each horizontal layer but only via a communication path, and end-to-end communications may depend on intermediate components that are hidden from them, but may need to be shown in certain views and analyzed for certain purposes. This architectural model pattern uses methods described in ISO 42010, Recommended Practice for Architectural Description of Software-intensive Systems and CCSDS 311.0-M-1, Reference Architecture for Space Data Systems (RASDS). A set of useful viewpoints and views are presented, along with the associated modeling representations, stakeholders and concerns. These viewpoints, views, and concerns then inform the modeling pattern. This pattern permits viewing the system from several different perspectives and at different layers of abstraction. An external viewpoint treats the systems of interest as black boxes and focuses on the applications view, another view exposes the details of the connections and other components between the black boxes. An internal view focuses on the implementation within the systems of interest, either showing external interface bindings and specific standards that define the communication stack profile or at the level of internal behavior. Orthogonally, a horizontal view isolates a single layer and a vertical viewpoint shows all layers at a single interface point between the systems of interest. Each of these views can in turn be described from both behavioral and structural viewpoints.

Shames, Peter M.↗