Search NASA⌕ Search

SEARCH · Search NASA

Results for “Computing methodologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

A Methodology for Actuating RCS Jets in a Continuous, Time-Accurate CFD Simulation

Computational fluid dynamics simulations of Mars entry vehicle reaction control systems have been used to gain a better understanding of the wide range of flow phenomena encountered during various phases of flight. One aspect of this is simulating the system during controlled flight. Current practices model the system in a continuously actuated state, but this methodology is unable to accurately model the dynamic behavior of the system during EDL. One method to improve this is to create a coupled CFD-RBD-Control simulation. The first step to this is establishing a method of accurately actuating an RCS jet during a time accurate CFD simulation. This paper presents a method to achieve this actuation. There are three phases to the methodology: establishing the off state, creating a ramping function that will initialize the jet flow, and establishing the on state. A test case of a jet in a supersonic crossflow is implemented to establish the success of the methodology in being able to actuate a jet in the midst of an ongoing CFD simulation. It shows significant improvement in boundary condition responsiveness for linear and exponential ramping functions in comparison to the step function. A preliminary demonstration of the methodology is presented for the MSL vehicle which shows significant advantages for the implementation of a linear ramping function over a step function.

Alexandra Hickey↗

A Methodology for Actuating RCS Jets in a Continuous, Time-Accurate CFD Simulation

Computational fluid dynamics simulations of Mars entry vehicle reaction control systems have been used to gain a better understanding of the wide range of flow phenomena encountered during various phases of flight. One aspect of this is simulating the system during controlled flight. Current practices model the system in a continuously actuated state, but this methodology is unable to accurately model the dynamic behavior of the system during EDL. One method to improve this is to create a coupled CFD-RBD-Control simulation. The first step to this is establishing a method of accurately actuating an RCS jet during a time accurate CFD simulation. This paper presents a method to achieve this actuation. There are three phases to the methodology: establishing the off state, creating a ramping function that will initialize the jet flow, and establishing the on state. A test case of a jet in a supersonic crossflow is implemented to establish the success of the methodology in being able to actuate a jet in the midst of an ongoing CFD simulation. It shows significant improvement in boundary condition responsiveness for linear and exponential ramping functions in comparison to the step function. A preliminary demonstration of the methodology is presented for the MSL vehicle which shows significant advantages for the implementation of a linear ramping function over a step function.

Alexandra Hickey↗

Predicting the Electronic Properties of 3D, Million-atom Semiconductor nanostructure Architectures

This final report describes the work done by Jack Dongarra (University Distinguished Professor) and Stanimire Tomov (Research Scientist) related to the DOE project entitled Predicting the Electronic Properties of 3D, Million-Atom Semiconductor Nanostructure Architectures. In this project we addressed the mathematical methodology required to calculate the electronic and transport properties of large nanostructures with comparable accuracy and reliability to that of current ab initio methods. This capability is critical for further developing the field, yet it is missing in all the existing computational methods. Additionally, quantitative comparisons with experiments are often needed for a qualitative understanding of the physics, and for guiding the design of new nanostructures. We focused on the mathematical challenges of the project, in particular on solvers and preconditioners for large scale eigenvalue problems that occur in the computation of electronic states of large nanosystems. Usually, the states of interest lie in the interior of the spectrum and their computation poses great difficulties for existing algorithms. The electronic properties of a semiconductor nanostructure architecture can be predicted/determined by computing its band structure. Of particular importance are the 'band edge states' (electronic states near the energy gap) which can be computed from a properly defined interior eigenvalue problem. Our primary mathematics and computational challenge here has been to develop an efficient solution methodology for finding these interior states for very large systems. Our work has produced excellent results in terms of developing both new and extending current state-of-the-art techniques.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A risk map methodology to assess the spatial and temporal distribution of leakage into groundwater from Geologic Carbon Storage

The risks to potable aquifers due to brine leakage through plugged and abandoned (P&A) wells is highly uncertain and a potentially significant contributor to the risk profile in Geologic Carbon Storage (GCS). This uncertainty stems from the unknown location of wells and the large variance of P&A wellbore permeability, making the spatial assessment of P&A brine leakage risk challenging. A new methodology is presented to generate “risk maps”, or spatial distributions of brine leakage risk to groundwater resources as defined with no-impact or Maximum Contaminant Level (MCL) thresholds. The methodology utilizes probability theory, thereby avoiding the use of computationally expensive Monte Carlo simulations while maintaining flexibility in modeling techniques. These maps provide quantitative probabilities of risk as a function of time to inform site selection and monitoring during and post-injection, conducive to the US EPA's permitting of class-VI wells and the so-called “area of review”, AoR. As a demonstration of the methodology, a numerical model of a hypothetical fully-coupled system spanning from the injection reservoir to the USDW is used to assess the evolution of brine leakage through P&A wells. Risk maps of CO 2 leakage can also be generated with this methodology for a comprehensive assessment of GCS leakage risk.

58 GEOSCIENCES↗

Transient Reliability Analysis Capability Developed for CARES/Life

The CARES/Life software developed at the NASA Glenn Research Center provides a general-purpose design tool that predicts the probability of the failure of a ceramic component as a function of its time in service. This award-winning software has been widely used by U.S. industry to establish the reliability and life of a brittle material (e.g., ceramic, intermetallic, and graphite) structures in a wide variety of 21st century applications.Present capabilities of the NASA CARES/Life code include probabilistic life prediction of ceramic components subjected to fast fracture, slow crack growth (stress corrosion), and cyclic fatigue failure modes. Currently, this code can compute the time-dependent reliability of ceramic structures subjected to simple time-dependent loading. For example, in slow crack growth failure conditions CARES/Life can handle sustained and linearly increasing time-dependent loads, whereas in cyclic fatigue applications various types of repetitive constant-amplitude loads can be accounted for. However, in real applications applied loads are rarely that simple but vary with time in more complex ways such as engine startup, shutdown, and dynamic and vibrational loads. In addition, when a given component is subjected to transient environmental and or thermal conditions, the material properties also vary with time. A methodology has now been developed to allow the CARES/Life computer code to perform reliability analysis of ceramic components undergoing transient thermal and mechanical loading. This means that CARES/Life will be able to analyze finite element models of ceramic components that simulate dynamic engine operating conditions. The methodology developed is generalized to account for material property variation (on strength distribution and fatigue) as a function of temperature. This allows CARES/Life to analyze components undergoing rapid temperature change in other words, components undergoing thermal shock. In addition, the capability has been developed to perform reliability analysis for components that undergo proof testing involving transient loads. This methodology was developed for environmentally assisted crack growth (crack growth as a function of time and loading), but it will be extended to account for cyclic fatigue (crack growth as a function of load cycles) as well.

Nemeth, Noel N.↗

Remote sensing solutions for estimating runoff and recharge in arid environments.

Efforts to understand and to quantify precipitation and its partitioning into runoff evapo-transpiration, and recharge are often hampered by the absence or paucity of appropriate monitoring systems. We applied methodologies for rainfall-runoff and groundwater recharge computations that heavily rely on observations extracted from a wide-range of global remote sensing data sets (TRMM, SSM/I, Landsat TM, AVHRR, AMSR-E, and ASTER) using the arid Sinai Peninsula (SP; area: 61,000 km{sup 2}) and the Eastern Desert (ED; area: 220,000 km{sup 2}) of Egypt as our test sites. A two-fold exercise was conducted. Spatiotemporal remote sensing data (TRMM, AVHRR and AMSR-E) were extracted from global data sets over the test sites using RESDEM, the Remote Sensing Data Extraction Model, and were then used to identify and to verify precipitation events throughout the past 10 years (1998-2007). This was accomplished by using an automated cloud detection technique to identify clouds and to monitor their propagation prior to and throughout the identified precipitation events, and by examining changes in soil moisture (extracted from AMSR-E data) following the identification of clouds. For the investigated period, 246 of 327 events were verified in the SP, and 179 of 304 in the ED. A catchment-based, continuous, semi-distributed hydrologic model (Soil Water and Assessment Tool model; SWAT) was calibrated against observed runoff values from Wadi Girafi Watershed (area: 3350 km{sup 2}) and then used to provide a continuous simulation (1998-2007) of the overland flow, channel flow, transmission losses, evaporation on bare soils and evapo-transpiration, and groundwater recharge for the major (area: 2014-22,030 km{sup 2}) watersheds in the SP (Watir, El-Arish, Dahab, and Awag) and the ED (Qena, Hammamat, Asyuti, Tarfa, El-Quffa, El-Batur, Kharit, Hodein, and Allaqi) covering 48% and 51% of the total areas of the SP and the ED, respectively. For the investigated watersheds in the SP, the average annual precipitation, average annual runoff, and average annual recharge through transmission losses were found to be: 2955 x 10{sup 6}m{sup 3}, 508 x 10{sup 6}m{sup 3} (17.1% total precipitation (TP)), and 463 x 10{sup 6}m{sup 3} (15.7% TP), respectively, whereas in the ED these values are: 807 x 10{sup 6}m{sup 3}, 77.8 x 10{sup 6}m{sup 3} (9.6% TP), and 171 x 10{sup 6}m{sup 3} (21.2% TP), respectively. Results demonstrate the enhanced opportunities for groundwater development in the SP (compared to the ED) and highlight the potential for similar applications in arid areas elsewhere. The adopted remote sensing-based, regionalization approach is not a substitute for traditional methodologies that rely on extensive field datasets from rain gauge and stream flow networks, yet could provide first-order estimates for rainfall, runoff, and recharge over large sectors of the arid world lacking adequate coverage with spatial and temporal precipitation and field data.

54 ENVIRONMENTAL SCIENCES↗

ROM-based Subset Selection Algorithm for Efficient Surrogate Modeling

This summary discusses a new methodology to support the construction of surrogate models for computationally expensive models with many input parameters and output responses. In realistic engineering calculations, such as thermal-hydraulics simulation, the cost of the simulation is typically expensive, especially when detailed models are employed to describe system behavior, thereby justifying the need for surrogate models. The cost of surrogate model construction is typically a function of the number of model parameters and the degree of model nonlinearity. For sufficiently complex models, the cost of constructing the surrogate model could be by itself overwhelmingly expensive, thereby diminishing its value. One key requirement of surrogate model construction is the ability to preselect the best parametric form to describe the model behavior over the expected range of parameter variations. This summary presents a new algorithm to help select the best approximation out of a template of functions using recent advances in reduced order modeling (ROM) techniques. The idea of selecting functions out of a template is typically referred to as subset selection in the statistical and applied mathematics community. Different from existing subset selection algorithms, we rely on ROM to help identify the most influential functions for the surrogate model. Previous work has shown that ROM can help reduce the effective dimensionality of the parameter space, which can help reduce the cost of surrogate model construction. In this summary, we adopt a different philosophy, where the fitting functions are treated as pseudo parameters and ROM is applied on the pseudo parameter space, with the result now being a ranked list of the pseudo parameters along with their contribution to the quality of the surrogate model fit. This approach allows the analyst to discard all terms that have negligible impact on the quantity of interest. A relap5 model is employed to demonstrate the application of the proposed methodology. (authors)

42 ENGINEERING↗

The multichannel $n$-propyl + O 2 reaction surface: Definitive theory on a model hydrocarbon oxidation mechanism

The n-propyl + O 2 reaction is an important model of chain branching reactions in larger combustion systems. In this work, focal point analyses (FPAs) extrapolating to the ab initio limit were performed on the n-propyl + O 2 system based on explicit quantum chemical computations with electron correlation treatments through coupled cluster single, double, triple, and perturbative quadruple excitations [CCSDT(Q)] and basis sets up to cc-pV5Z. All reaction species and transition states were fully optimized at the rigorous CCSD(T)/cc-pVTZ level of theory, revealing some substantial differences in comparison to the density functional theory geometries existing in the literature. A mixed Hessian methodology was implemented and benchmarked that essentially makes the computations of CCSD(T)/cc-pVTZ vibrational frequencies feasible and thus provides critical improvements to zero-point vibrational energies for the n-propyl + O 2 system. Two key stationary points, n-propylperoxy radical (MIN1) and its concerted elimination transition state (TS1), were located 32.7 kcal mol -1 and 2.4 kcal mol -1 below the reactants, respectively. Two competitive $β$-hydrogen transfer transition states (TS2 and TS2') were found separated by only 0.16 kcal mol -1 , a fact unrecognized in the current combustion literature. Incorporating TS2' in master equation (ME) kinetic models might reduce the large discrepancy of 2.5 kcal mol -1 between FPA and ME barrier heights for TS2. TS2 exhibits an anomalously large diagonal Born-Oppenheimer correction ($Δ$ DBOC = 1.71 kcal mol -1 ), which is indicative of a nearby surface crossing and possible nonadiabatic reaction dynamics. The first systematic conformational search of three hydroperoxypropyl (QOOH) intermediates was completed, uncovering a total of 32 rotamers lying within 1.6 kcal mol -1 of their respective lowest-energy minima. Our definitive energetics for stationary points on the $n$-propyl + O 2 potential energy surface provide key benchmarks for future studies of hydrocarbon oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Practical Engineering Approach to Predicting Fatigue Crack Growth in Riveted Lap Joints

An extensive experimental database has been assembled from very detailed teardown examinations of fatigue cracks found in rivet holes of fuselage structural components. Based on this experimental database, a comprehensive analysis methodology was developed to predict the onset of widespread fatigue damage in lap joints of fuselage structure. Several computer codes were developed with specialized capabilities to conduct the various analyses that make up the comprehensive methodology. Over the past several years, the authors have interrogated various aspects of the analysis methods to determine the degree of computational rigor required to produce numerical predictions with acceptable engineering accuracy. This study led to the formulation of a practical engineering approach to predicting fatigue crack growth in riveted lap joints. This paper describes the practical engineering approach and compares predictions with the results from several experimental studies.

Harris, C. E.↗

A Practical Engineering Approach to Predicting Fatigue Crack Growth in Riveted Lap Joints

An extensive experimental database has been assembled from very detailed teardown examinations of fatigue cracks found in rivet holes of fuselage structural components. Based on this experimental database, a comprehensive analysis methodology was developed to predict the onset of widespread fatigue damage in lap joints of fuselage structure. Several computer codes were developed with specialized capabilities to conduct the various analyses that make up the comprehensive methodology. Over the past several years, the authors have interrogated various aspects of the analysis methods to determine the degree of computational rigor required to produce numerical predictions with acceptable engineering accuracy. This study led to the formulation of a practical engineering approach to predicting fatigue crack growth in riveted lap joints. This paper describes the practical engineering approach and compares predictions with the results from several experimental studies.

Harris, Charles E.↗

Quantifying effectiveness of failure prediction and response in HPC systems : methodology and example.

Effective failure prediction and mitigation strategies in high-performance computing systems could provide huge gains in resilience of tightly coupled large-scale scientific codes. These gains would come from prediction-directed process migration and resource servicing, intelligent resource allocation, and checkpointing driven by failure predictors rather than at regular intervals based on nominal mean time to failure. Given probabilistic associations of outlier behavior in hardware-related metrics with eventual failure in hardware, system software, and/or applications, this paper explores approaches for quantifying the effects of prediction and mitigation strategies and demonstrates these using actual production system data. We describe context-relevant methodologies for determining the accuracy and cost-benefit of predictors. While many research studies have quantified the expected impact of growing system size, and the associated shortened mean time to failure (MTTF), on application performance in large-scale high-performance computing (HPC) platforms, there has been little if any work to quantify the possible gains from predicting system resource failures with significant but imperfect accuracy. This possibly stems from HPC system complexity and the fact that, to date, no one has established any good predictors of failure in these systems. Our work in the OVIS project aims to discover these predictors via a variety of data collection techniques and statistical analysis methods that yield probabilistic predictions. The question then is, 'How good or useful are these predictions?' We investigate methods for answering this question in a general setting, and illustrate them using a specific failure predictor discovered on a production system at Sandia.

99 GENERAL AND MISCELLANEOUS↗

Numerical modeling of rotor flows with a conservative form of the full-potential equations

A computer program has been developed to solve a three-dimensional conservative formulation of the full-potential equation. Its ability to solve transonic, unsteady rotor flows is demonstrated by comparison to forward flight non-lifting pressure data at low to moderate advance ratios. A 'split potential' formulation has been added to the code which incorporates known vorticity fields into the full-potential calculation. Using this methodology, rotor wake contributions have been incorporated into the computer code. Pressure results are presented for lifting rotors in hover. These results are compared to experimental data as well as to other predictions.

Strawn, R. C.↗

Rethinking Human-Centered Computing: Finding the Customer and Negotiated Interactions at the Airport

The breakdown in the air transportation system over the past several years raises an interesting question for researchers: How can we help improve the reliability of airline operations? In offering some answers to this question, we make a statement about Huuman-Centered Computing (HCC). First we offer the definition that HCC is a multi-disciplinary research and design methodology focused on supporting humans as they use technology by including cognitive and social systems, computational tools and the physical environment in the analysis of organizational systems. We suggest that a key element in understanding organizational systems is that there are external cognitive and social systems (customers) as well as internal cognitive and social systems (employees) and that they interact dynamically to impact the organization and its work. The design of human-centered intelligent systems must take this outside-inside dynamic into account. In the past, the design of intelligent systems has focused on supporting the work and improvisation requirements of employees but has often assumed that customer requirements are implicitly satisfied by employee requirements. Taking a customer-centric perspective provides a different lens for understanding this outside-inside dynamic, the work of the organization and the requirements of both customers and employees In this article we will: 1) Demonstrate how the use of ethnographic methods revealed the important outside-inside dynamic in an airline, specifically the consequential relationship between external customer requirements and perspectives and internal organizational processes and perspectives as they came together in a changing environment; 2) Describe how taking a customer centric perspective identifies places where the impact of the outside-inside dynamic is most critical and requires technology that can be adaptive; 3) Define and discuss the place of negotiated interactions in airline operations, identifying how these interactions between customers and airline employees provided new insights into design problems in the airline system; 4) Show how taking a customer-centric perspective influences the HCC design of an airline system and make recommendations for new architectures and intelligent devices that will enable airline systems to adapt flexibly to delay situations, supporting both customers and airline employees.

Wales, Roxana↗

CASL Virtual Reactor Predictive Simulation: Grid-to-Rod Fretting Wear

Grid-to-Rod Fretting (GTRF) wear is currently one of the main causes of fuel rod leaking in pressurized water reactors. The Consortium for Advanced Simulation of Light Water Reactors (CASL) has identified GTRF as one of the Challenge Problems that drive the requirement for the development and application of a modeling and simulation computational environment for predictive simulation of light water reactors. This paper presents fretting wear simulation methodology currently employed by Westinghouse, a CASL industrial partner, to address GTRF. The required advancements in the computational and materials science modeling areas to develop a predictive simulation environment by CASL to address GTRF are outlined.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Excited electronic states from a variational approach based on symmetry-projected Hartree–Fock configurations

Recent work from our research group has demonstrated that symmetry-projected Hartree–Fock (HF) methods provide a compact representation of molecular ground state wavefunctions based on a superposition of non-orthogonal Slater determinants. The symmetry-projected ansatz can account for static correlations in a computationally efficient way. Here we present a variational extension of this methodology applicable to excited states of the same symmetry as the ground state. Benchmark calculations on the C{sub 2} dimer with a modest basis set, which allows comparison with full configuration interaction results, indicate that this extension provides a high quality description of the low-lying spectrum for the entire dissociation profile. We apply the same methodology to obtain the full low-lying vertical excitation spectrum of formaldehyde, in good agreement with available theoretical and experimental data, as well as to a challenging model C{sub 2v} insertion pathway for BeH{sub 2}. The variational excited state methodology developed in this work has two remarkable traits: it is fully black-box and will be applicable to fairly large systems thanks to its mean-field computational cost.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Readily Available Primary Aminoboranes as Powerful Reagents for Aldimine Synthesis

Primary aminoboranes (RNHBR 2 ), which are readily available by spontaneous dehydrocoupling of amines and boranes cleanly react at room temperature with aldehydes to give aldimines. The overall transformation from amines to aldimines can be conveniently performed by a sequential one-pot reaction. This synthetic strategy is especially useful for electron poor and bulky amines which are reluctant to react with aldehydes under dehydration conditions. Using a Glorius robustness screen, we show that this methodology is chemoselective, and functional group tolerant. Finally, computational and experimental data support the irreversible formation of the aldimine product in marked contrast with traditional methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Integrated computational materials engineering: Tools, simulations and new applications

Here, Integrated Computational Materials Engineering (ICME) is a relatively new methodology full of tremendous potential to revolutionize how science, engineering and manufacturing work together. ICME was motivated by the desire to derive greater understanding throughout each portion of the development life cycle of materials, while simultaneously reducing the time between discovery to implementation [1,2].

42 ENGINEERING↗

Numerical investigation of the pressure-dependence of yield sooting indices for n-alkane and aromatic species

The pressure-dependence of the Yield Sooting Index (YSI), as a measure of sooting tendency, is numerically investigated for pressures ranging from 1 atm to 15 atm. Straight-chain alkanes, including ethane, propane, n-hexane, n-heptane, and n-dodecane, and aromatic species, including benzene, toluene, xylene, and ethylbenzene, are selected as test fuels. A detailed chemical mechanism is used for all test fuels considered, and a flamelet-based YSI simulation methodology is employed, where the YSI values are computed based on the Polycyclic Aromatic Hydrocarbon (PAH) dimer production rate at each pressure. It is found that the maximum flame centerline soot volume fraction increases with increasing pressure for all test compounds. However, the pressure dependence of the maximum soot volume fraction is similar for the hydrocarbons within the same class (n-alkane or aromatics). As a consequence, the YSI values computed at pressures up to 15 atm show only small deviations from their values computed and measured at atmospheric pressure. These results suggest that YSI is robust also at elevated pressures, close to those found in practical combustion devices. This study is entirely based on numerical simulations without any experimental measurements available for direct validation. Experimental YSI measurements at high pressures would be required to fully confirm the conclusions reported in this manuscript. Still, our numerical results provide some guidelines for the design of such experiments in the future.

42 ENGINEERING↗