Search NASA⌕ Search

SEARCH · Search NASA

Results for “DEMONSTRATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Integrally regulated solar array demonstration using an Intel 8080 microprocessor

A concept for regulating the voltage of a solar array by using a microprocessor to effect discrete voltage changes was demonstrated. Eight shorting switches were employed to regulate a simulated array at set-point voltages between 10,000 and 15,000 volts. The demonstration showed that the microprocessor easily regulated the solar array output voltage independently of whether or not the switched cell groups were binary sized in voltage. In addition, the microprocessor provided logic memory capability to perform additional tasks such as locating and insolating a faulty switch.

Petrik, E. J.↗

ERDA/NASA-MSFC solar heating and cooling development and demonstration program

The role of the Manned Space Flight Center (MSFC) in the National Solar Heating and Cooling program is evaluated. The responsibilities of the MSFC within this program are (1) to manage the development and testing of solar heating and cooling systems leading to marketable products, (2) to develop data acquisition equipment supporting a national data program, and (3) to manage and collect data from commercial demonstration sites. MSFC test facilities and demonstration sites are described.

Price, J. M.↗

Postflight analysis of science demonstrations

A summary of the results of the 12 Marshall Space Flight Center science demonstrations performed on Skylab is presented. The demonstrations include diffusion in liquids, ice melting, liquid floating zone, gyroscope, liquid films, immiscible liquids, Rochelle salt growth, deposition of silver crystals, fluid mechanics, neutron environment, orbital mechanics, and charged particle mobility.

Bannister, T. C.↗

Technical assessment of PSSC-supported experiments and demonstrations

A description of CTS and ATS short-term and long-term satellite demonstration supported through usage of a satellite communication ground station complex is presented. User assessments about the programmatic impact of their demonstrations and experiments were summarized. The technical planning and coordination process involved in satellite utilization is also presented.

Source record↗

A demonstration of dual spacecraft tracking conducted with the Viking spacecraft during the approach phase

The potential improvements in navigation capability of dual spacecraft tracking were demonstrated using Viking approach data. Under unfavorable conditions of large plasma noise, low spacecraft declination and large earth-spacecraft distance, the dual spacecraft tracking technique improved the Viking B approach accuracy based on short-arc radio metric data, by a factor of 7, to less than 200 km at Mars orbit insertion minus 3 days. From the results of an analytical expansion and the Viking demonstration with a large intentional error in Mars ephemeris, that dual spacecraft data types are shown to be insensitive to ephemeris error. Results also reveal the potential reduction of tracking time requirements during planet approach.

Chao, C. C.↗

A demonstration of differenced dual-station one-way doppler conducted with Pioneer 11

Simultaneous one way Doppler demonstrations performed on Pioneer 11 are described. The data noise of the differenced one way doppler as computed from the pseudo residuals is around 0.002 Hz, which is nearly an order of magnitude smaller than the one way Doppler noise and about the same as differenced two way/three way Doppler noise. The demonstration results and the applicability of differenced one way radio metric data to spacecraft navigation are discussed.

Chao, C. C.↗

Economic evaluation of DSS 13 unattended operations demonstration

The goals and data collection requirements to be used for the economic and performance evaluation indexes and life cycle cost parameters for the upcoming operations demonstration of an automated Deep Space Station (DSS) run unattended and controlled remotely from JPL are presented. These evaluation indexes compare the remote operation of telemetry at DSS 13 with the cost and performance of a comparable manned operation at DSS 11. A description is presented of the data that needs to be collected, how the data will be analyzed, and what can and cannot be learned from this operations demonstration.

Remer, D. S.↗

Flight demonstrations of curved, descending approaches and automatic landings using time referenced scanning beam guidance

The Terminal Configured Vehicle (TCV) program operates a Boeing 737 modified to include a second cockpit and a large amount of experimental navigation, guidance and control equipment for research on advanced avionics systems. Demonstration flights to include curved approaches and automatic landings were tracked by a phototheodolite system. For 50 approaches during the demonstration flights, the following results were obtained: the navigation system, using TRSB guidance, delivered the aircraft onto the 3 nautical mile final approach leg with an average overshoot of 25 feet past centerline, subjet to a 2-sigma dispersion of 90 feet. Lateral tracking data showed a mean error of 4.6 feet left of centerline at the category 1 decision height (200 feet) and 2.7 feet left of centerline at the category 2 decision height (100 feet). These values were subject to a sigma dispersion of about 10 feet. Finally, the glidepath tracking errors were 2.5 feet and 3.0 feet high at the category 1 and 2 decision heights, respectively, with a 2 sigma value of 6 feet.

White, W. F.↗

Liquid spreading ASTP Science Demonstration

Wetting and spreading phenomena are significant in a wide variety of processes. This report discusses the results of an ASTP Science Demonstration, 'Liquid Spreading', and compares these results to theoretical predictions. On earth the initial spreading of large liquid drops on solid surfaces is always dominated by gravity; in this demonstration the effect of gravity is greatly reduced so that surface energy forces are the controlling factor.

Bourgeois, S. V.↗

Deployable antenna demonstration study

A demonstration system and shuttle flight program was defined to demonstrate packaging, transportation, erection, and structural integrity of a large deployable antenna concept. An analysis of deployable antenna requirements indicates that (1) erectable structures are clearly applicable to very high precision (above 50 GHz) antennas (10 to 30 m); (2) deployable structures are light weight, applicable to moderate precision (below 14 GHz) large antennas (up to 300 m); and (3) both deployable and erectable apply to small and large antenna platforms with common utilities.

Thompson, W.↗

Operational Loopwheel Suspension System for Mars Rover Demonstration Model

The loopwheel (or elastic loop) mobility concept, appears to be uniquely qualified to provide a high degree of mobility at low weight and stowage requirements for the next Mars mission now in the early planning stage. Traction elements compatible with sterilization and Mars surface environmental constraints were designed and are compatible with the rover mass, range and stowage requirements of JPL's point design Mars rover. In order to save cost, the loopwheel suspensions for the demonstration model were made of S-glass/epoxy instead of titanium, alloy specified for flight units. The load carrying fiberglass loop core is covered by a rubber tread on the outside. Reinforced rubber gear belts bonded along the inside edges provide positive engagement and transmission drive torques. A 12 Vdc drive motor with a 167:1 gear head is installed in the payload section of the hull. A chain drive transmits the motor power to the rear sprocket in the demonstration model, whereas future flight units would be directly driven by brushless hub motors within each sprocket and independent four-leg height control.

Trautwein, W.↗

Space fabrication demonstration system, technical volume

The automatic beam builder ABB was developed, fabricated, and demonstrated within the established contract cost and schedule constraints. The ABB demonstrated the feasibility of: producing lightweight beams automatically within the required rate of 1 to 5 ft of completed beam per minute and producing structurally sound beams with axial design load of 5538 N based on the Grumman photovoltaic satellite solar power system design reference structure.

Source record↗

Development and demonstration of manufacturing processes for fabricating graphite/PMR-15 polyimide structural elements

The processing requirements for graphite/PMR-15 polyimide composites developed to demonstrate the structural integrity of polyimide composite structural elements at temperatures up to 589K (600 F) are described. Major tasks included: quality assurance development; materials and process development; specification verification; flat panel fabrication; stiffened panel fabrication; honeycomb panel fabrication; chopped fiber moldings; and demonstration component fabrication. Materials, processing, and quality assurance documents were prepared from experimentally derived data. Structural elements consisting of flat panels, corrugated stiffeners, I-beams, hat stiffeners, honeycomb panels, and chopped fiber moldings were made and tested. Property data from 219K (-65 F) to 589K (600 F) were obtained. All elements were made in a production environment. The size of each element was sufficient to insure production capability and structural component applicability. Problems associated with adhesive bonding, laminate and structural element analysis, material variability, and test methods were addressed.

Sheppard, C. H.↗

ATLAS, an integrated structural analysis and design system. Volume 5: System demonstration problems

One of a series of documents describing the ATLAS System for structural analysis and design is presented. A set of problems is described that demonstrate the various analysis and design capabilities of the ATLAS System proper as well as capabilities available by means of interfaces with other computer programs. Input data and results for each demonstration problem are discussed. Results are compared to theoretical solutions or experimental data where possible. Listings of all input data are included.

Samuel, R. A.↗

Shuttle demonstration of large space structure fabrication and assembly

This paper describes a program aimed at the early on-orbit demonstration of a large-space-structure fabrication and assembly capability. Requirements for the demonstration concept have been formulated. The concept selected to meet these requirements is a Large Space Structure Platform consisting of a triangular prism of 31.5 m length. Sensors can be mounted on this platform to perform earth-observation measurements from space. Structural elements of the platform are fabricated using an automated beam builder in the Shuttle Orbiter payload bay. Special fixtures are designed to assemble the structure with the aid of the remote manipulator system and two astroworkers in an EVA mode. Results of the platform preliminary design are presented in terms of a design layout with related structural, thermal, mass-properties, and control-dynamics data. The assembly scenario is described. Estimates of the total construction time and Orbiter support requirements are also presented.

Fleisig, R.↗

Demonstration of aircraft wing/store flutter suppression systems

A wind tunnel test program was conducted to demonstrate the active wing/store flutter suppression systems on a lightweight fighter aircraft. The program, completed in mid-1978, included the design, analysis, fabrication, and testing of a scale model. The tests were conducted at the NASA Langley 16-ft Transonic Dynamics Tunnel. Three store configurations were selected for testing. Two of these configurations were deliberately designed to exhibit low flutter speeds with rapid reductions in damping at the incipient flutter condition. After initial tunnel entries, which showed the need for certain improvements in the model and the control system design, substantial increases in the flutter speeds were achieved using both leading- and trailing-edge control surfaces, separately. For the most critical configuration, a demonstrated improvement of 18% and a projected improvement of 29% in the dynamic pressure were achieved.

Hwang, C.↗

Deep Space Station (DSS-13) automation demonstration

The data base collected during a six month demonstration of an automated Deep Space Station (DSS 13) run unattended and remotely controlled is summarized. During this period, DSS 13 received spacecraft telemetry data from Voyager, Pioneers 10 and 11, and Helios projects. Corrective and preventive maintenance are reported by subsystem including the traditional subsystems and those subsystems added for the automation demonstration. Operations and maintenance data for a comparable manned Deep Space Station (DSS 11) are also presented for comparison. The data suggests that unattended operations may reduce maintenance manhours in addition to reducing operator manhours. Corrective maintenance for the unmanned station was about one third of the manned station, and preventive maintenance was about one half.

Remer, D. S.↗

Demonstration of remote clock monitoring by VLBI with three baseline closures

The capability of very long baseline interferometry (VLBI) to monitor the stability of remotely located hydrogen maser frequency standards has been demonstrated by a series of experiments conducted between Deep Space Stations in Australia, Spain, and California. The measured stabilities of the clock systems, over approximately 10 day intervals, were 1 to 3 parts in 10 to the 13th power, with the instabilities due to the oscillators, the clock distribution systems, the receiving system delays, and the VLBI measurement error. Experiments were conducted independently using two different systems (BLOCK 0 and WBDAS). Later comparison shows agreement on the order of 1 part in 10 to the 13th power. Closure was demonstrated on three separate occasions to 33, 10, and 13 ns with an error uncertainty of + or - 42 ns. The results represent an important consistency check on VLBI measurements.

Cheetham, C. M.↗