Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Structural, morphological and optical properties of CeO{sub 2} thin films deposited by RF sputtering

Cerium oxide (CeO{sub 2}) thin films were deposited on glass substrates by sputtering at various substrate temperatures. CeO{sub 2} films were characterized by X-ray diffraction, FESEM, PL and Raman analyses. X-ray diffraction patterns of films reveal fcc cubic structure with preferential orientation along (2 2 0) crystallographic plane. SEM images show that the particles are uniformly distributed on the film surface. The films were found to be well adheared to the substrates and pin holes are not observed on the surface of the films. PL spectra exhibits a strong near band-gap-edge emission and a broad blue, green luminescence, which can be assigned to the presence of Ce and O vacancies, amorphous phases, deep level impurities and structural defects. The relative intensity between the different peaks of the bands related to defects or impurities was studied as a tool for quality control of the films. Moreover, vibrational measurements through Raman analysis were carried out and the results are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surfactant-assisted intercalation of high molecular weight poly(ethylene oxide) into vanadyl phosphate di-hydrate

Graphical abstract: CuK{sub {alpha}} X-ray diffraction patterns of the VOPO{sub 4}/PEO (A) e VOPO{sub 4}/CTA (B) and VOPO{sub 4}/CTA/PEO (C). Highlights: Black-Right-Pointing-Pointer VOPO{sub 4}/PEO has been synthesized by using CTAB, thereby improving PEO intercalation. Black-Right-Pointing-Pointer The d-spacing increase from 1.30 nm (VOPO{sub 4}/PEO) to 2.94 nm (VOPO{sub 4}/CTA/PEO). Black-Right-Pointing-Pointer This strategy was viable for intercalation of PEO with high molecular weight. -- Abstract: A high molecular weight poly(ethylene oxide)/layered vanadyl phosphate di-hydrate intercalation compound was synthesized via the surfactant-assisted approach. Results confirmed that surfactant molecules were replaced with the polymer, while the lamellar structure of the matrix was retained, and that the material presents high specific surface area. In addition, intercalation produced a more thermally stable polymer as evidenced by thermal analysis.

36 MATERIALS SCIENCE↗

Zn-doped CuAlS{sub 2} transparent p-type conductive thin films deposited by pulsed plasma deposition

CuAl{sub 0.90}Zn{sub 0.10}S{sub 2} thin films were deposited by pulsed plasma deposition. The dependence of structural, surface morphology, electrical, and optical properties of the films on substrate temperature was investigated. X-ray diffraction patterns reveal that the film be amorphous structure. The electrical properties are sensitive to the substrate temperature. A typical sample with conductivity of 50.9 S cm{sup -1}, carrier mobility of 3.13 cm{sup 2} V{sup -1} s{sup -1}, carrier concentration of 1.41x10{sup 19} cm{sup -3}, and average transmission of 74% in visible range of 400-700 nm was obtained. A transparent p-CuAlS{sub 2}:Zn/n-In{sub 2}O{sub 3}:W heterogeneous diode was also fabricated and exhibits rectifying current-voltage characteristics. The ratio of forward current to the reverse current exceeds 80 within the range of applied voltages of -3.0-+3.0 V and the turn-on voltage is approximately 0.5-0.8 V.

36 MATERIALS SCIENCE↗

Intercalation of organic molecules in 2D copper (II) nitroprusside: Intermolecular interactions and magnetic properties

This contribution discusses the intercalation of imidazole and its 2-ethyl derivative, and pyridine in 2D copper nitroprusside. In the interlayer region, neighboring molecules remain interacting throu gh their dipole and quadrupole moments, which supports the solid 3D crystal structure. The crystal structure of this series of intercalation compounds was solved and refined from powder X-ray diffraction patterns complemented with spectroscopic information. The intermolecular interactions were studied from the refined crystal structures and low temperature magnetic measurements. Due to strong attractive forces between neighboring molecules, the resulting π–π cloud overlapping enables the ferromagnetic coupling between metal centers on neighboring layers, which was actually observed for the solids containing imidazole and pyridine as intercalated molecules. For these two solids, the magnetic data were properly described with a model of six neighbors. For the solid containing 2-ethylimidazole and for 2D copper nitroprusside, a model of four neighbors in a plane is sufficient to obtain a reliable data fitting. - Highlights: • Intercalation of organic molecules in 2D copper (II) nitroprusside. • Molecular properties of intercalation compounds of 2D copper (II) nitroprusside. • Magnetic properties of hybrid inorganic–organic solids. • Hybrid inorganic–organic 3D framework.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Room temperature multiferroic properties of Pb(Fe{sub 0.5}Nb{sub 0.5})O{sub 3}–Co{sub 0.65}Zn{sub 0.35}Fe{sub 2}O{sub 4} composites

We report the crystal structure, magnetic, ferroelectric, dielectric, and magneto-dielectric properties of [Pb(Fe{sub 0.5}Nb{sub 0.5})O{sub 3}]{sub (1−x)}[Co{sub 0.65}Zn{sub 0.35}Fe{sub 2}O{sub 4}]{sub x}: (x = 0.1, 0.2, 0.3, and 0.4) composites. Rietveld refinement results of X-ray diffraction patterns confirm the formation of these composites for all x values. All the composites show well-saturated ferroelectric and ferromagnetic hysteresis (multiferroic-composite behavior) at room temperature. With increase in Co{sub 0.65}Zn{sub 0.35}Fe{sub 2}O{sub 4} (CZFO) content an increase in saturation magnetization, and decrease in saturation polarization, remanent polarization, and dielectric constant are observed. The ferroelectric phase transition temperature increases with increase in CZFO content. All of the compositions undergo second-order ferroelectric phase transitions, which can be explained by Landau-Devonshire theory. The recoverable energy density (∼0.20 to 0.04 J/cm{sup 3}) and charge-curve energy density (∼0.84 to 0.11 J/cm{sup 3}) decrease with increase in the CZFO content. The room-temperature magneto-dielectric measurements provide direct evidence of magneto-electric coupling via strain at room temperature.

36 MATERIALS SCIENCE↗

Proximity induced vortices and long-range triplet supercurrents in ferromagnetic Josephson junctions and spin valves

Using a spin-parameterized quasiclassical Keldysh-Usadel technique, we theoretically study supercurrent transport in several types of diffusive ferromagnetic (F)/superconducting (S) configurations with differing magnetization textures. We separate out the even- and odd-frequency components of the supercurrent within the low proximity limit and identify the relative contributions from the singlet and triplet channels. We first consider inhomogeneous one-dimensional Josephson structures consisting of a uniform bilayer magnetic S/F/F/S structure and a trilayer S/F/F/F/S configuration, in which case the outer F layers can have either a uniform or conical texture relative to the central uniform F layer. Our results demonstrate that for supercurrents flowing perpendicular to the F/F interfaces, incorporating a conical texture yields the most effective way to observe the signatures of long-ranged spin-triplet supercurrents. We also consider three different types of finite-sized two-dimensional magnetic structures subjected to an applied magnetic field normal to the junction plane: a S/F/S junction with uniform magnetization texture and two S/F/F/S configurations with differing F/F bilayer arrangements. In one case, the F/F interface is parallel with the S/F junction interfaces while in the other case, the F/F junction is oriented perpendicular to the S/F interfaces. We then discuss the proximity vortices and corresponding spatial maps of currents inside the junctions. For the uniform S/F/S junction, we analytically calculate the magnetic field induced supercurrent and pair potential in both the narrow and wide junction regimes, thus providing insight into the variations in the Fraunhofer diffraction patterns and proximity vortices when transitioning from a wide junction to a narrow one. Our extensive computations demonstrate that the induced long-range spin-triplet supercurrents can deeply penetrate uniform F/F bilayers when spin-singlet supercurrents flow parallel to the F/F interfaces. This is in stark contrast to configurations where a spin-singlet supercurrent flows perpendicular to the F/F interfaces. We pinpoint the origin of the induced triplet and singlet correlations through spatial profiles of the decomposed total supercurrents. We find that the penetration of the long-range spin-triplet supercurrents associated with supercurrents flowing parallel to the F/F interfaces is more pronounced when the thicknesses of the F strips are unequal. Finally, if one of the S terminals is replaced with a finite-sized normal metal, we demonstrate that the corresponding experimentally accessible S/F/F/N spin valve presents an effective platform in which the predicted long-range effects can be effectively generated and probed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tuning of structural and magnetic properties of Mn-doped CoFe{sub 2}O{sub 4} nanoparticles

In the present manuscript, Mn{sub x}Co{sub 1-x}Fe{sub 2}O{sub 4} (x=0.0, 0.2, 0.4, 0.6, 0.8 and 1.0) nanoparticles have been synthesized with co-precipitation method by annealing at 900 °C and studied the structural and magnetic properties. X ray diffraction pattern reveals the formation of single phase cubic spinel structure with the space group Fd-3m. An impurity peak of α-Fe{sub 2}O{sub 3} has been observed in the XRD patterns of samples with Mn composition, x ≥ 0.4. However, this impurity phase of α-Fe{sub 2}O{sub 3} is not observed in the MnFe{sub 2}O{sub 4} sample synthesized by annealing at 500 °C. FESEM results indicate the formation of nano-sized particles. Magnetic measurements show ferrimagnetic interaction in Mn{sub x}Co{sub 1-x}Fe{sub 2}O{sub 4} (x≥0) nanoparticles at room temperature. However, MnFe{sub 2}O{sub 4} sample synthesized by annealing at 500 °C shows superparamagnetic behavior. We have fitted the M-H curve of MnFe{sub 2}O{sub 4} synthesized by annealing at 500 °C with modified Langvenin function to confirm superparamagnetism. The correlation between the structural and observed magnetic properties of as synthesized samples nanoparticles will be described and discussed in this paper.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructural study and densification analysis of hot work tool steel matrix composites reinforced with TiB{sub 2} particles

Hot work tool steels are characterized by good toughness and high hot hardness but are less wear resistant than other tooling materials, such as high speed steel. Metal matrix composites show improved tribological behavior, but not much work has been done in the field of hot work tool steels. In this paper TiB{sub 2}-reinforced hot work tool steel matrix composites were produced by spark plasma sintering (SPS). Mechanical alloying (MA) was proposed as a suited process to improve the composite microstructure. Density measurements and microstructure confirmed that MA promotes sintering and produces a fine and homogeneous dispersion of reinforcing particles. X-ray diffraction patterns of the sintered composites highlighted the formation of equilibrium Fe{sub 2}B and TiC, as predicted by thermodynamic calculations using Thermo-Calc® software. Scanning electron microscopy as well as scanning Kelvin probe force microscopy highlighted the reaction of the steel matrix with TiB{sub 2} particles, showing the formation of a reaction layer at the TiB{sub 2}-steel interface. Phase investigations pointed out that TiB{sub 2} is not chemically stable in steel matrix because of the presence of carbon even during short time SPS. - Highlights: • TiB{sub 2} reinforced steel matrix composites were produced by spark plasma sintering. • TiB{sub 2} was successfully dispersed in the steel matrix by mechanical alloying. • Steel and TiB{sub 2} react during sintering forming equilibrium Fe{sub 2}B and TiC. • The new phases were investigated by means of AFM, Volta potential and XRD analyses.

36 MATERIALS SCIENCE↗

The influence of power spinning and annealing temperature on microstructures and properties of Cu-Sn alloy

Highlights: • The strengthening effect of power spinning is mainly achieved by strengthening fine grains and dislocations. • Twins formed by the aggregation and overlapping of stacking faults grow and widen • In power spinning of Cu-Sn alloy, plastic deformation is primarily powered by dislocation sliding. - Abstract: Electron back scatter diffraction pattern (EBSD), metallographic microscope (OM) and transmission electron microscope (TEM) are used to analyze the microstructural state of the Cu-Sn alloy before and after power spinning and annealing. The results show that after power spinning, the α phase grains are refined and gradually evolve into small and fine α{sub II} and deformed α{sub III} crystal grains, with an average grain size of about 2.2 μm. Work hardening results in massive network-like subgrain boundaries distributed in power spinning microstructure. Annealing at 400 °C contributes to the formation of dislocation cells and stacking faults, and high-angle grain boundaries (HABS) start to migrate and slide. After the formation of less defective equiaxed grains at 500 °C, twins continue to grow and widen based through continuous accumulation of stacking faults. Further testing of mechanical properties reveals that power spinning is conducive to the improvement of mechanical properties of Cu-Sn alloy.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis and characteristics of anions-doped calcium molybdate red powder phosphors

Graphical abstract: - Highlights: • Four anion-doped CaMoO{sub 4}:Eu{sup 3+} red phosphors were prepared by hydrothermal approach. • Some samples exhibit nearly spherical morphology and well-distributed fine particles. • The red luminescence can be obviously enhanced after certain amount of anion doping. • The improved phosphor system is a potential candidate for white LED applications. - Abstract: Applying hydrothermal and subsequent heat-treatment process, CaMoO{sub 4}:Eu{sup 3+} was doped with four anions (SiO{sub 3}{sup 2−}, PO{sub 4}{sup 3−}, SO{sub 4}{sup 2−} and ClO{sub 3}{sup −}) to prepare fine red powder phosphors. The introduction of small amount of anions into the host had little influence on the structure, which was confirmed by X-ray diffraction patterns. The anion-doped phosphor samples (except SiO{sub 3}{sup 2−}) exhibited nearly spherical morphology, and the particle sizes were in the range of 0.3–0.4 μm for SO{sub 4}{sup 2−}-doped samples, and 0.8–1.2 μm for PO{sub 4}{sup 3−} and ClO{sub 3}{sup −}-doped samples. Excited with 395 nm near-UV light, all samples showed typical Eu{sup 3+} red emission at 615 nm, and PO{sub 4}{sup 3−}, SO{sub 4}{sup 2−} and ClO{sub 3}{sup −}-doped samples enhanced the red luminescence as compared with the individual CaMoO{sub 4}:Eu{sup 3+} sample. In particular, relative emission intensity for optimum ClO{sub 3}{sup −}-doped phosphors reached more than 6-fold that of the commercial red phosphor, which is highly desirable for the powder phosphors used in the solid-state lighting industry.

36 MATERIALS SCIENCE↗

Magnetic Properties and Photocatalytic Behavior of Co Co-doped BiFeO{sub 3}:Er

The multiferroic materials Bi{sub 0.95}Er{sub 0.05}Fe{sub 1−x}Co{sub x} O{sub 3} (x = 0, 0.01, 0.03, and 0.05) are synthesized by solvothermal method. X-ray diffraction pattern is used to confirm the formation of rhombohedral crystal structure. TEM images show agglomerated nanosize particles. With the concentration of Co, a red shift is observed in the charge transfer transition of O{sub 2p}-Fe{sub 3d} band and band gap decreases. At higher concentration of Co, the saturation magnetization enhances and coercivity also varies with the concentration of Co. The photocatalytic degradation of methylene blue is evaluated under the visible light with the assistance of H{sub 2}O{sub 2}. With the increase in Co concentration, the photocatalytic activity decreases. The main species responsible for the degradation is found out using scavengers like ammonium oxalate, silver nitrate, p-benzoquinone, and tert-butyl-alcohol. The possible mechanism for the degradation of dye is explained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge ordering and multiferroicity in Fe{sub 3}BO{sub 5} and Fe{sub 2}MnBO{sub 5} oxyborates

The comparison of Fe{sub 3}BO{sub 5} and Fe{sub 2}MnBO{sub 5} reveals that the 2Fe{sup 2+}: Fe{sup 3+} charge ordering of the former is suppressed in the latter. Spin dynamics probed by ac susceptibility are strongly affected by the substitution, inducing superparamagnetism at low temperature in Fe{sub 2}MnBO{sub 5}. Interestingly, for both oxyborates, glassiness is observed in the dielectric properties at low temperature, but only Fe{sub 3}BO{sub 5} shows a magnetodielectric effect close to its lower magnetic transition. A change in the electrical polarization, measured by pyroelectric current integration, is observed in Fe{sub 3}BO{sub 5} and is even more pronounced in Fe{sub 2}MnBO{sub 5}. Such results suggest that these oxyborates behave like antiferromagnetic relaxor ferroelectrics. These features are proposed to be related to the distribution of the species (Fe{sup 3+}, Fe{sup 2+} and Mn{sup 2+}) over the four transition metal sites forming the ludwigite structure. - Graphical abstract: 90 K [010] electron diffraction patterns of Fe{sub 3}BO{sub 5}. The yellow arrows in the pattern indicate the extra-spots corresponding to the superstructure induced by the charge ordering. - Highlights: • The TEM (ED) study of the Fe{sub 3}BO{sub 5} oxyborate at 90 K reveals a superstructure related to a Fe{sup 2+}/Fe{sup 3+} ordering. • The Fe{sub 2}MnBO{sub 5}, Mn-substituted counterpart, does not show such ordering. • Our magnetic and electric measurements demonstrate that these magnetic ferrites exhibit glassiness in their charges (relaxor-type) with additional superparamagnetism at low T for Fe{sub 2}MnBO{sub 5} and magnetodielectric coupling near T{sub N2}=72 K in Fe{sub 3}BO{sub 5}. • The pyroelectric measurements confirm the existence of a ferroelectric behavior in these antiferromagnets. Accordingly, our results open the route to the study of other large class of the M{sub 2}{sup 2+}M’{sup 3+}BO{sub 5} ludwigites and to their complex magnetism and its relationship to relaxor ferroelectricity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Bi and Ti substitutions for Na and Nb on ferroelectric properties of oriented (Bi{sub 4.5+x}Na{sub 0.5-x})(Ti{sub 2x}Nb{sub 2-2x})WO{sub 15} compounds

Research highlights: {yields} (Bi{sub 4.5+x}Na{sub 0.5-x})(Ti{sub 2x}Nb{sub 2-2x})WO{sub 15} formed solid solution over whole composition range. {yields}P{sub r} of BNTNW decreased from 8.5 to 5.1 {mu}C/cm{sup 2} with increasing composition x. {yields} By using hot forging, P{sub r} of BNTNW at x = 0 was extremely improved (P{sub r} = 18 {mu}C/cm{sup 2}). -- Abstract: (Bi{sub 4.5+x}Na{sub 0.5-x})(Ti{sub 2x}Nb{sub 2-2x})WO{sub 15} (BNTNW) compounds were synthesized and their ferroelectric properties were characterized. The X-ray powder diffraction patterns of the compounds revealed that they have a single phase over the whole composition range. The linear variations of the lattice parameters with composition indicate the formation of solid solutions, resulting in a reduction in the orthorhombicity of the compounds. The remnant polarization of the BNTNW decreased from 8.5 to 5.1 {mu}C/cm{sup 2} with increasing x, which may be related to the orthorhombicity of the compounds. By using hot forging, an oriented BNTNW compound at x = 0 was obtained. Strong reflections from (0 0 l) were observed for sample // in which the measurement direction is parallel and the orientation factor of such sample was approximately 0.72. A remarkable increase in the remnant polarization (P{sub r}) of the compound was observed for the sample -perpendicular in which the direction of applied pressure is perpendicular to the measurement direction; the highest P{sub r} value was 18 {mu}C/cm{sup 2}.

36 MATERIALS SCIENCE↗

Tunable upconversion emission in Ba{sub 2}YF{sub 7}:Yb{sup 3+}/Er{sup 3+} nanocrystals with different Yb{sup 3+} concentration

Graphical abstract: The emission intensity at 520 nm and 540 nm can be tuned by Yb{sup 3+} concentration. - Highlights: • High concentration of Yb{sup 3+} can be doped into Ba{sub 2}YF{sub 7} without a phase change. • The emission intensity at 520 nm and 540 nm can be tuned by Yb{sup 3+} concentration. • The long lifetime of {sup 4}F{sub 9/2} level makes its populating effective. - Abstract: Ba{sub 2}YF{sub 7}:xYb{sup 3+},0.02Er{sup 3+} nanocrystals with different Yb{sup 3+} concentration (x = 0.2, 0.4, 0.6, 0.8, 0.98) were synthesized via a solvothermal method. Their X-ray diffraction patterns reveal that all the samples are cubic phase without phase change at arbitrary Yb{sup 3+} concentration. Upon excitation of 980 nm laser, these nanocrystals display upconversion emission in the green and red spectral regions. The relative emission intensity at these two regions can be tuned by Yb{sup 3+} concentration. To investigate the effect of Yb{sup 3+} ion, the decay times of 650 nm emission were measured and analyzed. Ba{sub 2}YF{sub 7}:0.6Yb{sup 3+},0.02Er{sup 3+} nanocrystals have the longest lifetime and highest emission intensity among all the samples. We concluded the lifetime of {sup 4}F{sub 9/2} level has an effect on its own population and intensity ratio of red and green emission. Our results show Yb{sup 3+} ion can tune the upconversion emission and improve upconverison emission intensity.

36 MATERIALS SCIENCE↗

Dielectric relaxation analysis of Pb(Zr{sub 0.54},Ti{sub 0.46})O{sub 3} thin films: Electric field dependence

350 nm-thick Perovskite PbZr{sub 0.54}Ti{sub 0.46}O{sub 3} (PZT) thin films were deposited on Al{sub 2}O{sub 3} substrates by sputtering with and without an additional 10-nm-thick TiO{sub x} buffer layer. X-ray diffraction patterns showed that in presence of TiO{sub x} buffer layer, PZT film was highly oriented along the (111) direction film, whereas the unbuffered, counterpart was polycrystalline. A full wave electromagnetic analysis using a vector finite element method was performed to determine the tunability and the complex permittivity up to 67 GHz. A comparison between the electromagnetic analysis and Cole-Cole relaxation model was proposed. Through an original study of the relaxation time as a function of the electric field, values, such as 2 ps and 0.6 ps, were estimated for E{sub DC} = 0 kV/cm and 235 kV/cm, respectively, and in both cases (111)-PZT and polycrystalline-PZT. The distribution of relaxation times is found to be larger for (111)-PZT film, which is probably related to the film microstructure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Feasibility of one-shot-per-crystal structure determination using Laue diffraction

Structure determination was successfully carried out using single Laue exposures from a group of lysozyme crystals. The Laue method may be a viable option for collection of one-shot-per-crystal data from microcrystals. Crystal size is an important factor in determining the number of diffraction patterns which may be obtained from a protein crystal before severe radiation damage sets in. As crystal dimensions decrease this number is reduced, eventually falling to one, at which point a complete data set must be assembled using data from multiple crystals. When only a single exposure is to be collected from each crystal, the polychromatic Laue technique may be preferable to monochromatic methods owing to its simultaneous recording of a large number of fully recorded reflections per image. To assess the feasibility of solving structures using single Laue images from multiple crystals, data were collected using a ‘pink’ beam at the CHESS D1 station from groups of lysozyme crystals with dimensions of the order of 20–30 µm mounted on MicroMesh grids. Single-shot Laue data were used for structure determination by molecular replacement and correct solutions were obtained even when as few as five crystals were used.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, optical, and magnetic properties of Fe doped In{sub 2}O{sub 3} powders

Highlights: • Synthesis of Fe doped In{sub 2}O{sub 3} powders using a solid state reaction. • Characterization of the samples using XRD, UV–vis-NIR, FT-IR, and VSM. • All Fe doped In{sub 2}O{sub 3} powders exhibited the cubic structure of In{sub 2}O{sub 3}. • All the Fe doped In{sub 2}O{sub 3} samples exhibited room temperature ferromagnetism. - Abstract: Iron doped indium oxide dilute magnetic semiconductor (In{sub 1−x}Fe{sub x}){sub 2}O{sub 3} (x = 0.00, 0.03, 0.05, and 0.07) powders were synthesized by standard solid state reaction method followed by vacuum annealing. The effect of Fe concentration on structural, optical, and magnetic properties of the (In{sub 1−x}Fe{sub x}){sub 2}O{sub 3} powders have been systematically studied. X-ray diffraction patterns confirmed the polycrystalline cubic structure of all the samples. An optical band gap increases from 3.12 eV to 3.16 eV while Fe concentration varying from 0.03 to 0.07. Magnetic studies reveal that virgin/undoped In{sub 2}O{sub 3} is diamagnetic. However, all the Fe-doped In{sub 2}O{sub 3} samples are ferromagnetic. The saturation magnetization (M{sub s}) of ferromagnetic (In{sub 1−x}Fe{sub x}){sub 2}O{sub 3} (x = 0.03, 0.05, and 0.07) samples increases from 11.56 memu/g to 148.64 memu/g with x = 0.03–0.07. The observed ferromagnetism in these samples was attributed to magnetic nature of the dopant (Fe) as well as defects created in the samples during vacuum annealing.

36 MATERIALS SCIENCE↗