Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic parameter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Calibration of Reduced Dynamic Models of Power Systems using Phasor Measurement Unit (PMU) Data

Accuracy of a power system dynamic model is essential to the secure and efficient operation of the system. Lower confidence on model accuracy usually leads to conservative operation and lowers asset usage. To improve model accuracy, identification algorithms have been developed to calibrate parameters of individual components using measurement data from staged tests. To facilitate online dynamic studies for large power system interconnections, this paper proposes a model reduction and calibration approach using phasor measurement unit (PMU) data. First, a model reduction method is used to reduce the number of dynamic components. Then, a calibration algorithm is developed to estimate parameters of the reduced model. This approach will help to maintain an accurate dynamic model suitable for online dynamic studies. The performance of the proposed method is verified through simulation studies.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A New Look at Historic CRAC 'Divergence' Experiments - Implications for a CAAS Minimum Accident of Concern

This paper examines power history parameters and results based on historic fissile solution criticality 'divergence' experiments (referenced here as Divergence Experiments) from the 1960's-70's' Consequences Radiologiques d'un Accident de Criticite' (CRAC) campaign. The results from specific Divergence Experiments have implications for an ANSI/ANS-8.3 (1997) Criticality Accident Alarm System (CAAS) Minimum Accident of Concern (MAC). Specifically, this paper examines select CRAC Divergence Experiments in conjunction with 'qualifying reactivity additions' for a MAC defined by an absolute time constraint. A previous paper presented at the 2011 International Conference on Nuclear Criticality (ICNC 2011) illustrated the differences in 'qualifying reactivity additions' above delayed critical (and below prompt) for a variety of MAC constructs. That paper was the first to examine delayed critical kinetics in greater detail over a range of process and MAC considerations. The ICNC2011 work did not consider an absolute MAC time constraint from the excursion onset and assumed an initial excursion power. That study evaluated MAC constructs based on 'relative time differences' between reaching a specific fission rate and total fissions. The work presented here thus picks up where the ICNC2011 study left off. The primary focus of this work provides simulated power histories for specific Divergence Experiments that served as a basis for justifying a MAC noted in ANS-8.3 Appendix A. This paper documents computational modeling and dynamic multiphysics simulation with known Divergence Experiment parameters for reactivity additions at, below, and above the reported terminal reactivity. The initial step considers replicating what could be a reasonable power history for the terminal reactivity addition to the extent the same peak power and total fissions are obtained over the total time considered. Power histories for all other reactivity additions are simulated by varying the input reactivity and solution heights for the same model. A relationship is obtained between reactivity addition and the time to reach specific MAC power and fission levels within a given time constraint (e.g. 60 s). The 'qualifying reactivity addition' is determined for the total MAC fissions within that time. This value is then compared to the historic terminal value (e.g. $0.33) or any other values (e.g. 'excess reactivity of only a few cents') noted in ANS-8.3 Appendix A. In general, calculated MAC power levels have ranged from 1.8 kW to 173 kW depending on material type and form, H/U, enrichment, critical volume, and dose response function. A minimum accident consideration noted a SHEBA experiment with an excess reactivity 7 cents above delayed critical (TD ∼110 s). This excursion provided an additional 10{sup 15} fissions after an undetermined buildup time resulting in a 'few times 10{sup 15} fissions'. ICNC 2011 LEU solutions calculations show 0.2 Gy in air corresponds to 1.4 x10{sup 16} fissions. Thus, while historically, 0.2 Gy has been loosely associated with 'several times 10{sup 15} fissions', in reality, the actual total fissions could be an order of magnitude larger, and the power associated with 0.2 Gy/min (7.5 kW) larger as well. The reactivity addition required to obtain the actual 0.2 Gy total fissions over 60 s could be much larger than considered. Another reason the qualifying reactivity level could be larger than previously noted, involves temperature reactivity feedback. Compensated reactivity results in a departure from a pure exponential power rise, increasing the doubling time (TD) as the excursion approaches peak power. Uncompensated reactivity additions and constant TD have been traditionally assumed for a pure exponential power rise through the kW range to determine either total MAC fissions, power, or arrival time to these values.

42 ENGINEERING↗

Probing the pathway of an ultrafast structural phase transition to illuminate the transition mechanism in Cu 2 S

Disentangling the primary order parameter from secondary order parameters in phase transitions is critical to the interpretation of transition mechanisms in strongly correlated systems and quantum materials. Here in this work, we present a study of structural phase transition pathways in superionic Cu 2 S nanocrystals that exhibit intriguing properties. Utilizing ultrafast electron diffraction techniques sensitive to both the momentum-space and the time-domain, we distinguish the dynamics of crystal symmetry breaking and lattice expansion in this system. We are able to follow the transient states along the transition pathway, and so observe the dynamics of both the primary and secondary order parameters. Based on these observations, we argue that the mechanism of structural phase transition in Cu 2 S is dominated by the electron-phonon coupling. Lastly, this mechanism advances the understanding from previous results, where the focus was solely on dynamic observations of the lattice expansion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The ignition design space of magnetized target fusion

The simple magnetized target implosion model of Lindemuth and Kirkpatrick [Nucl. Fusion 23, 263 (1983)] has been extended to survey the potential parameter space in which three types of magnetized targets—cylindrical with axial magnetic field, cylindrical with azimuthal magnetic field, and spherical with azimuthal magnetic field—might achieve ignition and produce large gain at achievable radial convergence ratios. The model has been used to compute the dynamic, time-dependent behavior of many initial parameter sets that have been based upon projected ignition conditions using the quasi-adiabatic and quasi-flux-conserving properties of magnetized target implosions. The time-dependent calculations have shown that energy gains greater than 30 can potentially be achieved for each type of target. By example, it is shown that high gain may be obtained at extremely low convergence ratios, e.g., less than 15, for appropriate initial conditions. It is also shown that reaching the ignition condition, i.e., when fusion deposition rates equal total loss rates, does not necessarily lead to high gain and high fuel burn-up. At the lower densities whereby fusion temperatures can be reached in magnetized targets, the fusion burn rate may be only comparable with the hydrodynamic heating/cooling rates. On the other hand, when the fusion burn rates significantly exceed the hydrodynamic rates, the calculations show a characteristic rapid increase in temperature due to alpha particle deposition with a subsequent increased burn rate and high gain. A major result of this paper is that each type of target operates in a different initial density-energy-velocity range. The results of this paper provide initial target plasma parameters and driver parameters that can be used to guide plasma formation and driver development for magnetized targets. The results indicate that plasmas for spherical, cylindrical with azimuthal field, and cylindrical with axial field targets must have an initial density greater than approximately 10{sup 17}/cm{sup 3}, 10{sup 18}/cm{sup 3}, and 10{sup 20}/cm{sup 3}, respectively, implying constraints on target plasma formation research.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Morphology and dynamics of polymer nanocomposites for varying polymer filler interactions

In this paper, we explore the thermodynamic and dynamic properties of polymer nanocomposites using Stochastic Molecular Dynamics simulation in the canonical ensemble. One of the major parameters that determines the properties of nanocomposites is the filler-monomer interfacial interaction strengths. By varying the interaction strengths as well as temperature of the system we could capture the dynamical response of the system from a fluid-fluid to bridging induced network states The structural properties when analyzed show a strongly networked solid-like transition which has been augmented using dynamical analysis. Calculations show the slowing down of nanoparticle diffusion in the network phase due to jamming of the nanoparticles. At certain parameter range, the equilibrium stress-stress autocorrelation function does not decay confirming the existence of solid-like behavior. The change in mechanical properties is supported by the morphological observations.

36 MATERIALS SCIENCE↗

Non-singular Brans–Dicke collapse in deformed phase space

We study the collapse process of a homogeneous perfect fluid (in FLRW background) with a barotropic equation of state in Brans–Dicke (BD) theory in the presence of phase space deformation effects. Such a deformation is introduced as a particular type of non-commutativity between phase space coordinates. For the commutative case, it has been shown in the literature (Scheel, 1995), that the dust collapse in BD theory leads to the formation of a spacetime singularity which is covered by an event horizon. In comparison to general relativity (GR), the authors concluded that the final state of black holes in BD theory is identical to the GR case but differs from GR during the dynamical evolution of the collapse process. However, the presence of non-commutative effects influences the dynamics of the collapse scenario and consequently a non-singular evolution is developed in the sense that a bounce emerges at a minimum radius, after which an expanding phase begins. Such a behavior is observed for positive values of the BD coupling parameter. For large positive values of the BD coupling parameter, when non-commutative effects are present, the dynamics of collapse process differs from the GR case. Finally, we show that for negative values of the BD coupling parameter, the singularity is replaced by an oscillatory bounce occurring at a finite time, with the frequency of oscillation and amplitude being damped at late times.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Calculation of reinforced-concrete frame strength under a simultaneous static cross section load and a column lateral impact

When designing buildings with reinforced concrete that are planned to resist dynamic loads it is necessary to calculate this structural behavior under operational static and emergency impact and blast loads. Calculations of the structures under shock-wave loads can be performed by solving dynamic equations that do not consider static loads. Due to this fact the calculation of reinforced concrete frame under a simultaneous static and dynamic load in full 3d settings becomes a very non trivial and resource consuming problem. This problem can be split into two tasks. The first one is a shock-wave problem that can be solved using software package RANET-3, which allows solving the problem using finite elements method adapted for dynamic task. This method calculates strain-stress state of the material and its dynamic destruction, which is considered as growth and consolidation of micro defects under loading. On the second step the results of the first step are taken as input parameters for quasi static calculation of simultaneous static and dynamic load using finite elements method in AMP Civil Engineering-11.

36 MATERIALS SCIENCE↗

Mott-Insulator States of Ultracold Atoms in Optical Resonators

We study the low temperature physics of an ultracold atomic gas in the potential formed inside a pumped optical resonator. Here, the height of the cavity potential, and hence the quantum state of the gas, depends not only on the pump parameters, but also on the atomic density through a dynamical ac-Stark shift of the cavity resonance. We derive the Bose-Hubbard model in one dimension and use the strong coupling expansion to determine the parameter regime in which the system is in the Mott-insulator state. We predict the existence of overlapping, competing Mott-insulator states, and bistable behavior in the vicinity of the shifted cavity resonance, controlled by the pump parameters. Outside these parameter regions, the state of the system is in most cases superfluid.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum coherence–driven self-organized criticality and nonequilibrium light localization

Self-organized criticality emerges in dynamical complex systems driven out of equilibrium and characterizes a wide range of classical phenomena in physics, geology, and biology. We report on a quantum coherence–controlled self-organized critical transition observed in the light localization behavior of a coherence-driven nanophotonic configuration. Our system is composed of a gain-enhanced plasmonic heterostructure controlled by a coherent drive, in which photons close to the stopped-light regime interact in the presence of the active nonlinearities, eventually synchronizing their dynamics. In this system, on the basis of analytical and corroborating full-wave Maxwell-Bloch computations, we observe quantum coherence–controlled self-organized criticality in the emergence of light localization arising from the synchronization of the photons. It is associated with two first-order phase transitions: one pertaining to the synchronization of the dynamics of the photons and the second pertaining to an inversionless lasing transition by the coherent drive. The so-attained light localization, which is robust to dissipation, fluctuations, and many-body interactions, exhibits scale-invariant power laws and absence of finely tuned control parameters. We also found that, in this nonequilibrium dynamical system, the effective critical “temperature” of the system drops to zero, whereupon one enters the quantum self-organized critical regime.

36 MATERIALS SCIENCE↗

Gravitational wave production from preheating: parameter dependence

Parametric resonance is among the most efficient phenomena generating gravitational waves (GWs) in the early Universe. The dynamics of parametric resonance, and hence of the GWs, depend exclusively on the resonance parameter q . The latter is determined by the properties of each scenario: the initial amplitude and potential curvature of the oscillating field, and its coupling to other species. Previous works have only studied the GW production for fixed value(s) of q . We present an analytical derivation of the GW amplitude dependence on q , valid for any scenario, which we confront against numerical results. By running lattice simulations in an expanding grid, we study for a wide range of q values, the production of GWs in post-inflationary preheating scenarios driven by parametric resonance. We present simple fits for the final amplitude and position of the local maxima in the GW spectrum. Our parametrization allows to predict the location and amplitude of the GW background today, for an arbitrary q . The GW signal can be rather large, as h {sup 2Ω}{sub GW}( f {sub p} ) ∼< 10{sup −11}, but it is always peaked at high frequencies f {sub p} ∼> 10{sup 7} Hz. We also discuss the case of spectator-field scenarios, where the oscillatory field can be e.g. a curvaton, or the Standard Model Higgs.

79 ASTRONOMY AND ASTROPHYSICS↗

Beam Dynamics simulations for ERDC project -- SRF linac for industrial use

Compact conductively cooled SRF industrial linacs can provide unique parameters of the electron beam for industrial applications. (up to 10MeV, 1MW). For ERDC project we designed normal conducting RF injector with thermal RF gridded gun integrated in first cell of multi-cell cavities. For design of the RF gun we used MICHELLE software to simulate and optimize parameters of the beam. Output file was converted to ASTRA format and most beam dynamic simulations in multi-cell normal conducting cavity and cryomodule were performed by using ASTRA software. For cross-checking we compare results of MICHELLE and AS-TRA in first few cells. At the end of injector beam reach ~250keV energy which allow to trap bunch in acceleration regime without losses in TESLA like 1.3 GHz cavity. Short solenoid at the end of injector allow to regulate transverse beam size in cryomodule to match beam to extraction system and also reduce charge losses in accelerator.

43 PARTICLE ACCELERATORS↗

Nonlinear dynamical system approaches towards neural prosthesis

An asynchronous discrete-state spiking neurons is a wired system of shift registers that can mimic nonlinear dynamics of an ODE-based neuron model. The control parameter of the neuron is the wiring pattern among the registers and thus they are suitable for on-chip learning. In this paper an asynchronous discrete-state spiking neuron is introduced and its typical nonlinear phenomena are demonstrated. Also, a learning algorithm for a set of neurons is presented and it is demonstrated that the algorithm enables the set of neurons to reconstruct nonlinear dynamics of another set of neurons with unknown parameter values. The learning function is validated by FPGA experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fluid Behavior in Nanoporous Silica

We investigate dynamics of water (H 2 O) and methanol (CH 3 OH and CH 3 OD) inside mesoporous silica materials with pore diameters of 4.0, 2.5, and 1.5 nm using low-field (LF) nuclear magnetic resonance (NMR) relaxometry. Experiments were conducted to test the effects of pore size, pore volume, type of fluid, fluid/solid ratio, and temperature on fluid dynamics. Longitudinal relaxation times (T 1 ) and transverse relaxation times (T 2 ) were obtained for the above systems. We observe an increasing deviation in confined fluid behavior compared to that of bulk fluid with decreasing fluid-to-solid ratio. Our results show that the surface area-to-volume ratio is a critical parameter compared to pore diameter in the relaxation dynamics of confined water. An increase in temperature for the range between 25 and 50°C studied did not influence T 2 times of confined water significantly. However, when the temperature was increased, T 1 times of water confined in both silica-2.5 nm and silica-1.5 nm increased, while those of water in silica-4.0 nm did not change. Reductions in both T 1 and T 2 values as a function of fluid-to-solid ratio were independent of confined fluid species studied here. The parameter T 1 /T 2 indicates that H 2 O interacts more strongly with the pore walls of silica-4.0 nm than CH 3 OH and CH 3 OD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of iron redox ratio on the structures of boroaluminosilicate glasses

Iron oxide is commonly found in natural or industrial glass compositions and can exist as ferrous (Fe 2+ ) or ferric (Fe 3+ ) species, with their ratios depending on glass composition, temperature, pressure and the redox reactions during the glass forming process. The iron redox ratio plays an important role on silicate glass structures and consequently various properties. This work aims to study the effect of iron oxide, and particularly the iron redox ratio, on the structures of borosilicate and boroaluminosilicate glasses using molecular dynamics simulations with newly developed iron potential parameters that are compatible with the borosilicate potentials. The results provide detailed cation coordination states of both iron species and the effect of redox ratio on boron coordination and other structural features. Particularly, competition for charge compensating modifier cations (such as Na + ) among the fourfold-coordinated cations such as B 3+ , Al 3+ , and Fe 3+ is investigated by calculating the cation–cation pair distribution functions and coordination preferential ratios. The results show that the trivalent ferric ions, with a shorter Fe–O bond distance and better defined first coordiation shell with mainly four-fold coordination, act as a glass former whereas the divalent ferrous ions mainly play the role of glass modifier. The ferrous/ferric ratio (Fe 2+ /Fe 3+ ) was found to affect the glass chemistry and hence glass properties by regulating the amount of four-coordinated boron, the fraction of non-briding oxygen and other features. Finally, the results are compared with available experimental data to gain insights of the complex structures and charge compensation schemes of the glass system.

36 MATERIALS SCIENCE↗

Nonlinear post-compression in multi-pass cells in the mid-IR region using bulk materials

We numerically investigate the regime of nonlinear pulse compression at mid-IR wavelengths in a multi-pass cell (MPC) containing a dielectric plate. This post-compression setup allows for ionization-free spectral broadening and self-compression while mitigating self-focusing effects. We find that self-compression occurs for a wide range of MPC and pulse parameters and derive scaling rules that enable its optimization. We also reveal the solitonic dynamics of the pulse propagation in the MPC and its limitations and show that spatiotemporal/spectral couplings can be mitigated for appropriately chosen parameters. In addition, we reveal the formation of spectral features akin to quasi-phase matched degenerate four-wave mixing. Finally, we present two case studies of self-compression at 3-μm and 6-μm wavelengths using pulse parameters compatible with driving high-field physics experiments. The simulations presented in this paper set a framework for future experimental work using few-cycle pulses at mid-IR wavelengths.

Carlson, D. (ORCID:0000000346836463)↗

Reconfigurable structure and tunable transport in synchronized active spinner materials

Ensembles of actuated colloids are excellent model systems to explore emergent out-of-equilibrium structures, complex collective dynamics, and design rules for the next generation materials. Here, we demonstrate that ferromagnetic microparticles suspended at an air-water interface and energized by an external rotating magnetic field spontaneously form dynamic ensembles of synchronized spinners in a certain range of the excitation field parameters. Each spinner generates strong hydrodynamic flows, and collective interactions of the multiple spinners promote a formation of dynamic lattices. On the basis of experiments and simulations, we reveal structural transitions from liquid to nearly crystalline states in this novel active spinner material and demonstrate that dynamic spinner lattices are reconfigurable, capable of self-healing behavior and that the transport of embedded inert cargo particles can be remotely tuned by the parameters of the external excitation field. Our findings provide insights into the behavior of active spinner materials with reconfigurable structural order and tunable functionalities.

36 MATERIALS SCIENCE↗

Determination of the structure of lithium niobosilicate glasses by molecular dynamics simulation with a new Nb-O potential

A partial charge empirical potential for the Nb-O pair has been developed based on existing parameters of other pairs in a Teter potential to enable molecular dynamics simulations of both lithium niobate crystal and lithium niobosilicate glasses. The developed potential is capable of describing structural features of lithium niobosilicate glasses in a wide composition range, including niobium coordination number and bond length, density, bond angle distribution, polyhedral distribution and fraction of bridging oxygen. Furthermore, the results obtained using this new potential show good agreement with experimental data of density and structure from Raman spectroscopy of lithium niobosilicate glasses and X-ray absorption spectroscopy near Nb K-edge.

36 MATERIALS SCIENCE↗

Acceleration of Solvation Free Energy Calculation via Thermodynamic Integration Coupled with Gaussian Process Regression and Improved Gelman–Rubin Convergence Diagnostics

The determination of the solvation free energy of ions and molecules holds profound importance across a spectrum of applications spanning chemistry, biology, energy storage, and the environment. Molecular dynamics simulations are powerful tools for computing this critical parameter. Nevertheless, the accurate and efficient calculation of the solvation free energy becomes a formidable endeavor when dealing with complex systems characterized by potent Coulombic interactions and sluggish ion dynamics and, consequently, slow transition across various metastable states. Here, in the present study, we expose limitations stemming from the conventional calculation of the statistical inefficiency g in the thermodynamic integration method, a factor that can hinder the determination of convergence of the solvation free energy and its associated uncertainty. Instead, we propose a robust scheme based on Gelman–Rubin convergence diagnostics. We leverage this improved estimation of uncertainties to introduce an innovative accelerated thermodynamic integration method based on the Gaussian Process regression. This methodology is applied to the calculation of the solvation free energy of trivalent rare-earth elements immersed in ionic liquids, a scenario in which the aforementioned challenges render standard approaches ineffective. The proposed method proves to be effective in computing solvation free energy in situations where traditional thermodynamic integration methods fall short.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗