Search NASA⌕ Search

SEARCH · Search NASA

Results for “Failures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Predicting failure parameters of semiconductor devices subjected to stress conditions

A method for predicting failure parameters of semiconductor devices can include receiving a set of data that includes (i) characteristics of a sample semiconductor device, and (ii) parameters characterizing a stress condition. The method further includes extracting a plurality of feature values from the set of data and inputting the plurality of feature values into a trained model executing on the one or more processors, wherein the trained model is configured according to an artificial intelligence (AI) algorithm based on a previous plurality of feature values, and wherein the trained model is operable to output a failure prediction based on the plurality of feature values. Further, the method includes generating, via the trained model, a predicted failure parameter of the sample semiconductor device due to the stress condition.

Ahmed, Moinuddin↗

Failure Evaluation of Savannah River Site High-Level Waste Evaporator 242-25H - Part II - 17353

The Department of Energy's Savannah River Site evaporators are essential to the site actively managing and reducing its liquid high level waste inventory. Since 1951, a series of dedicated evaporators have reduced the liquid waste inventory from 600 ML (160 Mgal) by about a factor of four. The evaporators predominantly have experienced steam tube bundle failures, due to corrosion or fatigue, within about a decade of entering service. To extend service life, recent evaporators have used nickel-based alloys, such as Alloy G-3 (UNS N06030), and have improved operational controls to prevent corrosion. In spite of this, the 242-25H Evaporator recently developed a slow shell leak (0.4 L/min) after sixteen years. An evaporator shell leak is unique in the site's operating history. Finding and characterizing the leak has been challenging because of conflicting information from leak rate data and the locations of externally visible waste. The approaches used to evaluate possible failure modes are described. Failure modes considered include but are not limited to: pressure, temperature, materials, corrosion, fatigue, erosion, and wear. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Mechanical Failure Modes and Longevity of Geo-membranes - 16365

Estimates of the long-term performance of geo-synthetic liner and final cover components have traditionally relied on a small number of standard assumptions originally developed to address the needs of the Resource Conservation and Recovery Act (RCRA) Subtitle D solid waste industry. These past estimates demonstrated that, even under a series of highly conservative factors, the longevity of these components far exceeds the requirements for typical municipal solid waste (MSW) facilities. However, interest in the performance of these components for the disposal of low-level (LLW) and intermediate-level (ILW) radioactive waste landfills has led to additional study of geo-synthetic degradation to address longer assessment periods. These studies allow for the possibility of more rigorous, reliability-based risk assessments of landfill system performance. A particularly strong research need for LLW/ILW facilities is a complete enumeration of the various chemical and mechanical failures modes for geo-membranes serving as final cover and base liner barrier systems. For final covers, failure is defined as allowing an unacceptable flow of water into a containment system. Studies of the various mechanical modes of deformation and rupture for polyethylene sheet allow for a rigorous exploration of the potential causes of geo-membrane barrier system failure. Of particular interest in the performance assessment and engineering of these systems is the ability to use the resulting models to quantify the longevity of these systems with a probabilistic model. An example of this approach is used to illustrate how the consideration of the mechanism for stress cracking in final cover geo-membranes can be adapted for use in simulations of long-term landfill system performance. The results indicate that the effects of cover system design geometry and geo-membrane formulation on performance can be varied significantly by the cover system engineering to meet target performance goals. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Impacts of common cause failure regulatory requirements on protection system architectures - 304

Regulatory-based design considerations for potential common cause failures (CCF) in digital instrumentation and control (I and C) systems have evolved over time and have impacted the development of protection system I and C architectures. The single failure criterion used to be the main design driver for a protection system I and C architecture and resulted in the familiar four-fold and three-fold system architectures. The single failure criterion has now been replaced by the conservative assumptions associated with digital CCF concerns (i.e., assumed digital CCF coincident with an anticipated operational transient or postulated accident) which are classified as 'beyond design basis events' by regulatory authorities. It is unusual for a beyond design basis event to be the controlling factor for a safety system design but that is now the reality for I and C system designers. The preferred regulatory solution is to introduce diversity into I and C system designs to guard against the general concern of digital CCF. However, the lack of clear criteria on how to define sufficient diversity (i.e., how much, what kind, and whether it is linked to identified digital CCF vulnerabilities) had led to more complex I and C architectures. The trend has been towards lengthy and more difficult reviews for the treatment of digital CCF vulnerabilities and I and C system architectures because of the subjective definition of digital CCF vulnerabilities and the lack of clear acceptance criteria for diversity strategy. Improvement in the treatment of digital CCF is needed to reverse the trend of increased I and C system architecture complexity and longer regulatory reviews. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Nuclear power plant instrumentation and control cyber security common vector access leading to relational common cause failures - 340

Nuclear power plants and facilities have been implementing digital system upgrades into their previously analog systems for well over twenty years. New nuclear facilities' control, security, and emergency preparedness systems are almost exclusively built on digital architectures with a high degree of communication between the various systems that are often integrated together into a central control station to aid in operation or security of the facility. As digital systems become more widespread in nuclear facility control system architectures, cyber security related issues have become a significant concern to operators, regulators, governments, and other groups. Among the many concerns related to digital systems and cyber security is the area of common cause and common mode failures. This paper introduces, defines, and discusses some sources of common cause failure from a cyber security perspective: common vector access. This refers to specific access points that an adversary can exploit through a single attack sequence that have the potential to provide relational failures through common cause on multiple components, subsystems, systems, or plants. This paper will further discuss interconnected processes where these access points may exist, the importance of limiting or controlling these pinch points, and some methods of protecting common vector access points. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

NRC technical basis for evaluation of its position on protection against common cause failure in digital systems used in nuclear power plants - 378

Digital technology has advantages over analog systems, including automated monitoring and alerts for standby safety functions, and predictive algorithms to maintain critical safety systems. Additionally, digital technology generally has higher reliability and can be designed to reduce single point vulnerabilities. For these reasons many nuclear plants have applied digital technology to safety and non-safety related applications, including reactor protection system, feedwater and turbine controls, etc. with a corresponding significant improvement in trip reduction. Nonetheless, digital instrumentation and control (I and C) systems also present potential new vulnerabilities that need to be assessed, including potential failures due to increased complexity of digital systems, the introduction of unique failure modes due to software (including software common cause failure (CCF)), and limited operating history of digital systems in nuclear safety related applications compared to analog systems. The fact that software is intangible means that common methods, such as analysis or testing, used for detecting CCF may not be effective when applied to software. Consequently, digital technology is perceived to pose a potential risk from the introduction of undetected systematic faults that could result in CCF. Despite the I and C system upgrades and modifications performed to date, the U.S. Nuclear Regulatory Commission (NRC) and industry stakeholders have identified the need to modernize the regulatory infrastructure to efficiently address risks associated with the use of digital technology for nuclear safety applications and address regulatory uncertainties. The NRC's current position on CCF is guided by the staff requirements memorandum (SRM) on SECY 93-087. The SRM provides specific acceptance criteria for the evaluation of CCF, which the staff implemented in the Branch Technical Position (BTP) 7-19. However, industry stakeholders have proposed using methods to characterize the likelihood of software CCF and eliminate it from further consideration in a defense-in-depth and diversity analysis. The NRC's current position does not consider these alternatives, and thus corresponding acceptance criteria is not currently available. The work discussed in this paper assesses the underlying technical basis associated with CCF, provides technical support for updating the NRC position and considers proposed methods for addressing potential CCF in digital systems while enhancing efficiency, clarity, and confidence. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Failure Diagnosis for the Holdup Tank System via ISFA

This paper discusses the use of the integrated system failure analysis (ISFA) technique for fault diagnosis for the holdup tank system. ISFA is a simulation-based, qualitative and integrated approach used to study fault propagation in systems containing both hardware and software subsystems. The holdup tank system consists of a tank containing a fluid whose level is controlled by an inlet valve and an outlet valve. We introduce the component and functional models of the system, quantify the main parameters and simulate possible failure-propagation paths based on the fault propagation approach, ISFA. The results show that most component failures in the holdup tank system can be identified clearly and that ISFA is viable as a technique for fault diagnosis. Since ISFA is a qualitative technique that can be used in the very early stages of system design, this case study provides indications that it can be used early to study design aspects that relate to robustness and fault tolerance. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Multifidelity Active Learning for Failure Estimation of TRISO Nuclear Fuel

The Tristructural isotropic (TRISO)-coated particle fuel is a robust nuclear fuel proposed to be used for multiple modern nuclear technologies. Therefore, characterizing its safety is vital for the reliable operation of nuclear technologies. However, the TRISO fuel failure probabilities are small and the computational model is time consuming to evaluate them using traditional Monte Carlo-type approaches. In the paper, we present a multifidelity active learning approach to efficiently estimate small failure probabilities given an expensive computational model. Active learning suggests the next best training set for optimal subsequent predictive performance and multifidelity modeling uses cheaper low-fidelity models to approximate the high-fidelity model output. After presenting the multifidelity active learning approach, we apply it to efficiently predict TRISO failure probability and make comparisons to the reference results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Interim Development of new Class B Code Case with Variable Design Lifetime and enhanced design rules to guard against cyclic structural failure mode

This report summarizes updates on the ongoing development of the new American Society of Mechanical Engineers Section III, Division 5, Class B rules to address the potential failure modes of Class B components. An initial design-by-analysis approach and supporting design rules are presented. The elastic-perfectly plastic (EPP) analysis approach has been adopted for primary stress limit and ratcheting check to prevent the component failure against the structural failure mode against primary load and strain accumulation due to cyclic loads. The creep-fatigue damage assessment uses explicitly defined elastic follow-up calculated from the stress concentration region of given component. Damage fraction calculation uses a novel coupled approach to capture the influence of the elastic follow-up and provide adequate conservatism for Class B components. The proposed Class B rules does not use the stress classification approach and uses the combined loads to assess component.

36 MATERIALS SCIENCE↗

Failure time distributions for complex equipment

The exponential distribution is inadequate as a failure time model for most components; however, under certain conditions (in particular, that component failure rates are small and mutually independent, and failed components are immediately replaced or perfectly repaired), it is applicable to complex repairable systems with large numbers of components in series, regardless of component distributions, as shown by Drenick in 1960. This result implies that system behavior may become simpler as more components are added. We review necessary conditions for the result and present some simulation studies to assess how well it holds in systems with finite numbers of components. Lastly, we also note that Drenick's result is analogous to similar results in other systems disciplines, again resulting in simpler behavior as the number of entities in the system increases.

42 ENGINEERING↗

Sandia Fracture Challenge 3: detailing the Sandia Team Q failure prediction strategy

The third Sandia Fracture Challenge illustrated the geometric and material uncertainties presented by modern additive manufacturing techniques. Tasked with the challenge of predicting failure of a complex additively-manufactured geometry made of 316L stainless steel, we combined a rigorous material calibration scheme with a number of statistical assessments of problem uncertainties. Particularly, we used optimization techniques to calibrate a rate-dependent and anisotropic Hill plasticity model to represent material deformation coupled with a damage model driven by void growth and nucleation. Through targeted simulation studies we assessed the influence of internal voids and surface flaws on the specimens of interest in the challenge which guided our material modeling choices. Employing the Kolmogorov–Smirnov test statistic, we developed a representative suite of simulations to account for the geometric variability of test specimens and the variability introduced by material parameter uncertainty. This method allowed the team to successfully predict the failure mode of the experimental test population as well as the global response with a high degree of accuracy.

316L stainless steel↗

Prediction of Technological Failures in Nuclear Power Plant Operation

A method for predicting operating technological failures in nuclear power plants which makes it possible to reduce the unloading of the generator unit during the onset and development of an anomalous engineering state of the equipment by detecting a change in state earlier and taking suitable measures. With the circulating water supply loop of a nuclear power plant as an example, scenarios and algorithms for predicting technological failures in the operation of equipment long before their actual occurrence are discussed.

42 ENGINEERING↗

Axial Tensile Failure Analysis of SiC{sub f}/Ti Composite Based on Continuum Cohesive Zone Model

In this paper, the failure behavior of SiC fiber-reinforced Ti-6Al-4V matrix composite (SiC{sub f}/Ti) under longitudinal loads was studied experimentally and theoretically. Experimental results show that the interface of SiC{sub f}/Ti composite is continuous and integral. Through SEM observations, it was found that transverse matrix cracks initiated from the debonding region of the interface. A three-dimensional representative volume element was developed to simulate the failure process of SiC{sub f}/Ti-6Al-4V composite. A continuum cohesive zone model is employed to describe the debonding behavior at the interface, compared with a discrete one. More accurate simulated results were obtained by a continuum cohesive zone model, corresponding to experimental results. The transverse cracking behavior of the matrix was simulated. The stress–strain curves predicted by the continuum cohesive zone model show a good agreement with the experimental results. The fiber volume fraction, interface strength and interface toughness are investigated to exhibit their influences upon the longitudinal mechanical characteristics of SiC{sub f}/Ti-6Al-4V composite.

36 MATERIALS SCIENCE↗

An FEM-Based Peridynamic Model for Failure Analysis of Unidirectional Fiber-Reinforced Laminates

To predict the mixed damage modes of unidirectional fiber-reinforced polymer (FRP) laminates under dynamic loading, an FEM-based peridynamic model is introduced in this paper. Based on its geometric structure and material composition, a long fiber lamina is considered a transversely isotropic medium as a result of homogenization at the meso-scale. The laminated structure is modeled by stacking surface mesh layers with arbitrary fiber angles along the thickness direction. The peridynamic bonds between Gauss points connect the separated elements. These bonds are classified as inner-layer bonds and inter-layer bonds. To represent the anisotropy of a laminate, the micro-elastic modulus of the inner-layer and inter-layer bonds is calculated from the anisotropic engineering material constants separately. To capture complex failure behaviors of laminate structures, an empirical damage model is proposed for the tension/ compression breakage of peridynamic bonds. This damage model can control the in-plane and delamination failure process. Finally, benchmark tests are conducted to validate the elastic response of laminates under dynamic loading. In terms of damage analysis, the proposed model can capture the complex damage modes and resistive force of laminate structures.

36 MATERIALS SCIENCE↗

Claudin-3 expression in radiation-exposed rat models: A potential marker for radiation-induced intestinal barrier failure

Highlights: • Irradiation increased intestinal bacterial translocation, accompanied by claudin protein expression in rats. • Neurotensin decreased the bacterial translocation and restored claudin-3 expression. • Claudin-3 can be used as a marker in evaluating radiation induced intestinal injury. - Abstract: The molecular events leading to radiation-induced intestinal barrier failure are not well known. The influence of the expression of claudin proteins in the presence and absence of neurotensin was investigated in radiation-exposed rat intestinal epithelium. Wistar rats were randomly divided into control, irradiation, and irradiation + neurotensin groups, and bacterial translocation to the mesenteric lymph node and expression of claudins were determined. Irradiation led to intestinal barrier failure as demonstrated by significant bacterial translocation. In irradiated terminal ilea, expression of claudin-3 and claudin-4 was significantly decreased, and claudin-2 expression was increased. Administration of neurotensin significantly reduced bacterial translocation and restored the structure of the villi as seen by histologic examination. Among the three subtype of claudins, only claudin-3 expression was restored. These results suggest that the therapeutic effect of neurotensin on the disruption of the intestinal barrier is associated with claudin-3 alteration and that claudin-3 could be used as a marker in evaluating radiation-induced intestinal injury.

60 APPLIED LIFE SCIENCES↗

Experimental investigation of probabilistic failure of SiC/SiC composite tubes under multiaxial loading

This paper presents an experimental investigation of the failure behavior of SiC fiber-reinforced SiC matrix (SiC/SiC) composite tubes under multiaxial loading. A new testing apparatus is designed to independently apply axial stress and internal pressure to SiC/SiC tubes. Acoustic emission (AE) is used to monitor the damage growth in the specimen. Based on the measured stress–strain response, a strain-based criterion is proposed to determine the proportional limit stress (PLS). The proposed strain-based criterion is compared with the PLS determined by the AE measurement. The PLS is determined for different loading ratios to form a multiaxial failure surface. By testing multiple replicates, the statistical variations of the PLS are determined. In conclusion, based on the experimental results, a mathematical model is developed to characterize the probability distribution of the PLS of SiC/SiC composites under multiaxial loading.

36 MATERIALS SCIENCE↗

Hydrogen-enhanced compatibility constraint for intergranular failure in FCC FeNiCoCrMn high-entropy alloy

The fundamental mechanism of hydrogen embrittlement was investigated in the high-entropy alloy FeNiCoCrMn using slow strain rate tensile tests with and without internal hydrogen. Hydrogen induced intergranular failure and reduced the average grain elongation parallel to the tensile axis, but also increased the local plasticity within grains. Here, the influence of hydrogen on plasticity establishes a compatibility constraint across grain boundaries, which results in failure along the hydrogen-weakened grain boundaries. This study is the first to directly confirm the presence of the hydrogen-enhanced compatibility constraint in a high-entropy alloy and highlights the importance of developing a physical understanding of grain-scale interactions.

36 MATERIALS SCIENCE↗

Electrochemical-mechanical coupling failure mechanism of composite cathode in all-solid-state batteries

Composite cathode composed of active particles and solid electrolytes (SEs) can considerably enlarge the particle-SE contact areas and achieve high areal loadings in all-solid-state batteries (ASSBs). However, the challenging interfacial instability and particle damage problems remain unsolved. Herein, we establish a 3D electrochemical-mechanical coupled model to investigate the underlying failure mechanism by considering the governing electrochemical and physics processes. Micro-scale heterogeneous primary particles with random crystallographic orientation and size inside the LiNi 1/3 Co 1/3 Mn 1/3 O 2 (NCM111) secondary particle of the model result in the anisotropic Li diffusion and volume variation within the secondary particle, leading to significant nonuniformity of the Li concentration, and GPa-level stress distributions at primary particle boundaries, and finally causing the particle internal cracks. The particle volume shrinkage under the constraint of stiff Li 7 La 3 Zr 2 O 12 (LLZO) SE triggers the interface debonding (gap>50 nm) with increased interfacial impedance to degrade cell capacity. Higher C-rates result in larger residual stress (~100 MPa)/strain/debonding gap at dis-charging end, more likely to deteriorate the cell performance. Increasing the interfacial strength between the particle and SE can suppress the interface debonding but induces high stress (up to 10 GPa). In conclusion, results reveal the underlying mechanism of the electrochemical-mechanical coupling failure mechanism for composite cathode and provide promising guidance on the further improvement of a more robust composite cathode for ASSBs.

25 ENERGY STORAGE↗