Search NASA⌕ Search

SEARCH · Search NASA

Results for “High Temperature Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

A comparison of temperature and humidity effects on phosphor-converted LED packages and the prediction of remaining useful life with state estimation

This paper focuses on the failure mechanisms and color stability of a commercially available high power LED under harsh environmental conditions. 3 groups of the same pc-HB warm white LED were used in the experiment. The first group was subjected to both high temperature and high relative humidity (85°C/85%RH) with a 350mA bias current. The second group was subjected to only temperature stress at 105°C with a 350mA bias current. The last group was subjected to extreme high temperature 175°C and high bias current (500mA). Samples were taken out from the chamber for both photometric and colorimetric analysis at periodic intervals to investigate the change of the optical parameters. The physics of failure due to the material degradation has been correlated with the change in the photometric and colorimetric parameters of the LED packages. At the end of the experiment, 6000 hours of data is projected forward with state estimation methods to compare with projections made with the TM-21 method. Experimental results shows that only optical parts degrades at high temperature conditions. However, at both high temperature and high relative humidity condition, the phosphor layer of the pc-LED can swell and the color stability of LEDs degrades significantly. Also, comparison between TM-21 method and state estimation method shows that state estimation can achieve the same goal with a relatively easy method.

Lall, Pradeep↗

Dispersion interactions in proposed covalent superhydride superconductors

Recent developments in high temperature superconducting materials under high pressure have made numerical evaluation of the superconducting transition temperature (T c ) of predicted materials critically important as a means to identification. Existing methods of calculating T c often do not agree with each other or experiment, often due to the large number of complex factors that contribute to this property; among them is the neglect of dispersion interactions in commonly used density functionals. We evaluate the effect of including dispersion interactions on the predicted superconducting properties of two examples of the covalent superhydride class of very high-T c superconducting materials. In both cases, dispersion is found to have sizable effects, increasing the electron-phonon coupling as compared to the reference case of elemental niobium. A detailed investigation traces the origin of this effect in a 270 GPa $\mathrm {R3m CSH_7}$ structure to structural distortions driven by long-range electron-phonon interactions rather than novel bonding networks.

36 MATERIALS SCIENCE↗

A new technique for direct traceability of contact thermometry Co-C eutectic cells to the ITS-90

The eutectic Co-C melting point is a promising system to serve as a thermometric fixed-point in the temperature range above 1084.62 °C (copper freezing point). During the last decade, LNE-Cnam has developed and characterized some fixed-point devices, based on eutectic Co-C alloy, for applications to contact and radiation thermometry. Above 962 °C, the ITS-90 is realized by radiation thermometry by the extrapolation from a Ag, Au or Cu fixed point using the Planck law for radiation. So the only way for assigning a temperature in the scale to a Co-C cell (∼1324 °C) is by radiation thermometry. An indirect method is commonly used to assign a temperature to a high-temperature fixed point (HTFP) cell designed for contact thermometry is to fill a pyrometric cell with the same mixture as the contact thermometry cell. In this case, the temperature assigned to the pyrometric cell is attributed to the contact cell. This paper describes a direct method allowing the determination of the melting temperature realized by a 'contact thermometry' Co-C cell by comparison to a 'radiation thermometry' Co-C cell whose melting temperature was assigned in accordance to the scale by extrapolation from the Cu point. In addition, the same Co-C cell is studied with a standard Pt/Pd thermocouple.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Evaluation of a novel mid-infrared pyrometer for dynamic material experiments

Dynamic experiments create high-pressure shock waves on the microsecond time scale (or smaller), compressing materials to high pressures and temperatures and enabling the study of material properties at these conditions. Other dynamic studies use quasi-isentropic compression to produce similar high pressures at much lower temperatures. High pressure experiments performed on dynamic platforms such as gas-guns, laser, and pinch machines generate up to several hundred GPa in the sample pressure conditions12. Related static studies include diamond anvil cells, which obtain high pressures and have extremely high precision, but are most often conducted at room temperature or modest temperature increases (often <2000K). By combining these methods, material properties across a wide range of thermodynamic conditions can be probed, and a high quality equation of state (EOS) constructed.

36 MATERIALS SCIENCE↗

Technical and Economic Assessment and Gap Analysis of Advanced Nuclear Reactor Integration with a Reference Methanol Synthesis Plant

Efforts continue to identify the most-economic methods to decarbonize several sectors of the United States (U.S.) economy. Industrial processes such as synfuel synthesis and high value commodity chemicals rely heavily on energy-dense and easily stored and transported fossil fuels, which power and feed their operations. Steam methane reforming (SMR) is a widely used process for producing methanol. In this process, methane (CH 4 ) from natural gas (NG) reacts with steam (H 2 O) over a catalyst at high temperatures (700-1,000°C) to produce syngas, a mixture of hydrogen (H 2 ) and carbon monoxide (CO). The syngas is then converted into methanol (CH 3 OH) through a second catalytic reaction. This method is known for being an efficient and commonly employed pathway for industrial methanol production. The high-temperature heat needed for SMR, which is currently used in the natural-gas-to-methanol process, cannot be supplied by small modular nuclear reactor (SMNR) direct heating; the temperatures required for the SMR process exceed those of the main steam produced by near-market high-temperature gas reactors (HTGRs). For the conventional methanol process, this leaves possible nuclear-integration opportunities that include: (1) blending nuclear hydrogen into the SMR NG fuel, or (2) assessing alternative synthesis routes leveraging nuclear capabilities and steam electrolysis outputs. In the reference methanol plant, SMR provides the methanol-synthesis reactor with H 2 and co. In Case (2), the state-of-the-art reverse water gas shift (RWGS) pathway achieves the same, sourcing carbon from an industrial CO 2 source.

08 HYDROGEN↗

Technical and Economic Assessment and Gap Analysis of Advanced Nuclear Reactor Integration with a Reference Methanol Synthesis Plant

Efforts continue to identify the most-economic methods to decarbonize several sectors of the United States (U.S.) economy. Industrial processes such as synfuel synthesis and high value commodity chemicals rely heavily on energy-dense and easily stored and transported fossil fuels, which power and feed their operations. Steam methane reforming (SMR) is a widely used process for producing methanol. In this process, methane (CH 4 ) from natural gas (NG) reacts with steam (H 2 O) over a catalyst at high temperatures (700°1,000°C) to produce syngas, a mixture of hydrogen (H 2 ) and carbon monoxide (CO). The syngas is then converted into methanol (CH 3 OH) through a second catalytic reaction. This method is known for being an efficient and commonly employed pathway for industrial methanol production. The high-temperature heat needed for SMR, which is currently used in the natural-gas-to-methanol process, cannot be supplied by small modular nuclear reactor (SMNR) direct heating; the temperatures required for the SMR process exceed those of the main steam produced by near-market high-temperature gas reactors (HTGRs). For the conventional methanol process, this leaves possible nuclear-integration opportunities that include: (1) blending nuclear hydrogen into the SMR NG fuel, or (2) assessing alternative synthesis routes leveraging nuclear capabilities and steam electrolysis outputs. In the reference methanol plant, SMR provides the methanol-synthesis reactor with H 2 and co. In Case (2), the state-of-the-art reverse water gas shift (RWGS) pathway achieves the same, sourcing carbon from an industrial CO 2 source.

08 - HYDROGEN↗

NASA Tech Briefs, December 2003

Topics covered include: Organic/Inorganic Hybrid Polymer/Clay Nanocomposites; Less-Toxic Coatings for Inhibiting Corrosion of Aluminum; Liquid Coatings for Reducing Corrosion of Steel in Concrete; Processable Polyimides Containing APB and Reactive End Caps; Rod/Coil Block Copolyimides for Ion-Conducting Membranes; Techniques for Characterizing Microwave Printed Antennas; Cylindrical Antenna With Partly Adaptive Phased-Array Feed; Command Interface ASIC - Analog Interface ASIC Chip Set; Predicting Accumulations of Ice on Aerodynamic Surfaces; Analyzing Aeroelasticity in Turbomachines; Software for Allocating Resources in the Deep Space Network; Expert Seeker; High-Speed Recording of Test Data on Hard Disks; Functionally Graded Nanophase Beryllium/Carbon Composites; Thin Thermal-Insulation Blankets for Very High Temperatures; Aerostructures Test Wing; Flight-Test Evaluation of Flutter-Prediction Methods; Piezoelectrically Actuated Microvalve for Liquid Effluents; Larger-Stroke Piezoelectrically Actuated Microvalve; Innovative, High-Pressure, Cryogenic Control Valve: Short Face-to-Face, Reduced Cost; Safer Roadside Crash Walls Would Limit Deceleration; Improved Interactive Medical-Imaging System; Scanning Microscopes Using X Rays and Microchannels; Slotting Fins of Heat Exchangers to Provide Thermal Breaks; Methane Clathrate Hydrate Prospecting; Automated Monitoring with a BSP Fault-Detection Test; Automated Monitoring with a BCP Fault-Decision Test; Vector-Ordering Filter Procedure for Data Reduction; Remote Sensing and Information Technology for Large Farms; Developments at the Advanced Design Technologies Testbed; Spore-Forming Bacteria that Resist Sterilization; and Acoustical Applications of the HHT Method.

Source record↗

A Low-Temperature, Solution Processable Tin Oxide Electron-Transporting Layer Prepared by the Dual-Fuel Combustion Method for Efficient Perovskite Solar Cells

Although tin oxide (SnO 2 ) has been employed recently as an efficient electron-transporter to realize highly efficient organometal halide perovskite solar cells (PVSCs), it is still quite challenging to apply it through facile solution-based synthesis at low enough temperature (<150 °C) to be compatible with the roll-to-roll printing on polymer substrates. In this work, a dual-fuel combustion method has been successfully adapted to modulate the exothermic characteristics and processing temperature (140 °C) of SnO 2 to achieve homogeneous and crystalline thin film as efficient electron-transporting layer for PVSCs. The fabricated SnO 2 film not only has high transparency (from 350 nm to near-infrared region) but also possesses good electron extraction ability, as evidenced by the efficient PL quenching in bilayered SnO 2 /CH 3 NH 3 PbI 3 film. By passivating SnO 2 surface with a C 60 -containing self-assembled monolayer (C 60 -SAM), a high power conversion efficiency (PCE max ) of >15% with negligible hysteresis can be achieved in PVSC. This demonstrates the great potential of applying this dual-fuel combustion process to improve processability and charge-transporting properties of metal oxides for organic electronics applications.

14 SOLAR ENERGY↗

Divergent synthesis routes and superconductivity of ternary hydride MgSiH 6 at high pressure

We predict a new ternary hydride MgSiH6 under high pressures, which is a metal with an ionic feature and takes on a simple cubic structure with space group Pm-3 above 250 GPa. Our first-principles calculations show that the cubic MgSiH 6 is a potential high-temperature superconductor with a superconducting transition temperature T c of ~ 63 K at 250 GPa. Further analysis suggests that phonon softening along mainly Γ-X and Γ-M directions induced by Fermi surface nesting plays a crucial role in the high-temperature superconductivity. Herein we propose the “triangle straight-line method” which provides a clear guide to determine the specific A + B → D type formation routes for ternary hydrides of the Mg-Si-H system and it effectively reveals two divergent paths to obtain MgSiH6 under high pressures: MgH 2 + SiH 4 → MgSiH 6 and MgSi + 3H 2 → MgSiH 6 . This method might be applicable to all ternary compounds, which will be very significant for further experimental synthesis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Satellite Spots Turbulence Producing Mountain Waves in the Stratosphere

When masses of air flow over massive mountains, invisible waves often roil high into the stratosphere, affecting weather and mixing the chemicals that contribute to ozone depletion. The waves also create turbulence that can be a danger to high-altitude research missions by NASA's lightweight ER-2 aircraft, as well as shuttle flights upon reentry. In Friday's issue of the journal Science, researchers report for the first time a technique that allows them to see temperature signatures from these invisible mountain waves. The method, involving high-resolution, satellite-based measurement of adjacent pockets of the atmosphere, is expected to aid in spotting turbulence and, one day, improve weather forecasts.

Britt, Robert Roy↗

Joining Dissimilar Materials Using Friction Stir Scribe Technique

Development of a robust and cost-effective method of joining dissimilar materials could provide a critical pathway to enable widespread use of multi-material designs and components in mainstream industrial applications. The use of multi-material components such as steel-aluminum and aluminum-polymer would allow design engineers to optimize material utilization based on service requirements and could often lead to weight and cost reductions. However, producing an effective joint between materials with vastly different thermal, microstructural, and deformation responses is highly problematic using conventional joining and/or fastening methods. This is especially challenging in cost sensitive, high volume markets that largely rely on low cost joining solutions. Friction stir scribe technology was developed to meet the demands of joining materials with drastically different properties and melting regimes. The process enables joining of light metals like magnesium and aluminum to high temperature materials like steel and titanium. Viable joints between polymer composites and metal can also be made using this method. This paper will present the state of the art, progress made, and challenges associated with this innovative derivative of friction stir welding in reference to joining dissimilar metals and polymer/metal combinations.

Upadhyay, Piyush↗

Deriving Climate Change Signal from Hyperspectral Sounders Using Spectral Fingerprinting Method

Hyperspectral observations from satellite-based sensors provide high information content for the Earth’s atmospheric temperature, water vapor and trace gas vertical profiles. We have developed a radiometrically consistent spectral fingerprinting method to derive climate change signals from Aqua AIRS/AMSU and S-NPP CrIS/ATMS data. The climate variables include temperature and water vapor profiles, cloud, trace gases, and surface skin temperature. The radiative kernels obtained via a single field of view physical retrieval algorithm under all-sky conditions. A key component to this work is a Principal Component-based Radiative Transfer Model (PCRTM). It is 4 orders of magnitude faster than a line-by-line radiative transfer model while keeping a similar accuracy (0.03 K RMS errors with close to zero bias). The PCRTM includes multiple scattering of clouds and non-thermodynamics equilibrium of CO2 in the RT calculations. Instead of quantifying the radiometric differences between AIRS/AMSU and CrIS/ATMS measurements directly using Simultaneous Nadir Overpass (SNO) or Double Difference Technique (DDT), we use the radiometric consistent fingerprinting scheme to derive two sets of space-time averaged anomalies from the Level 1 data of AIRS/AMSU and CrIS/ATMS. The derived anomalies in geophysical space will form a long-term, stable, and continuous climate data record. We can further infer the causes of any offset or drift by studying the differences between two overlapping data sets. For example, the offset in surface skin temperature anomaly time series will most likely caused by the Blackbody temperature calibration errors of the sounder instruments.

climate↗

Towards exact finite temperature electronic structure in solids and molecules (Final Technical Report)

This report describes the University of Iowa portion of a project that is now continuing at Michigan State University. We are developing novel methods, algorithms, and software to enable simulations of molecules and materials at high temperature. This is a key challenge in chemistry and materials science. By refining an approach called Density Matrix Quantum Monte Carlo (DMQMC), we developed faster and more accurate ways to conduct these simulations. These advances will help us understand how temperature affects the behavior of electrons, chemical bonds, and phase transitions in solids and molecules. These breakthroughs are especially important for applications where light and heat drive chemical reactions, superconductivity, and materials used in energy and sensing. In addition, this project involved the development of the open-source HANDE-QMC software package, supporting the broader community in benchmarking and developing finite-temperature electronic structure methods.

36 MATERIALS SCIENCE↗

Differential heating: A versatile method for thermal conductivity measurements in high-energy-density matter

We propose a method for thermal conductivity measurements of high energy density matter based on differential heating. A temperature gradient is created either by surface heating of one material or at an interface between two materials by different energy deposition. The subsequent heat conduction across the temperature gradient is observed by various time-resolved probing techniques. Conceptual designs of such measurements using laser heating, proton heating, and x-ray heating are presented. The sensitivity of the measurements to thermal conductivity is confirmed by simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improved high temperature radiation damage tolerance in a three-phase ceramic with heterointerfaces

Abstract Radiation damage tolerance for a variety of ceramics at high temperatures depends on the material’s resistance to nucleation and growth of extended defects. Such processes are prevalent in ceramics employed for space, nuclear fission/fusion and nuclear waste environments. This report shows that random heterointerfaces in materials with sub-micron grains can act as highly efficient sinks for point defects compared to grain boundaries in single-phase materials. The concentration of dislocation loops in a radiation damage-prone phase (Al 2 O 3 ) is significantly reduced when Al 2 O 3 is a component of a composite system as opposed to a single-phase system. These results present a novel method for designing exceptionally radiation damage tolerant ceramics at high temperatures with a stable grain size, without requiring extensive interfacial engineering or production of nanocrystalline materials.

36 MATERIALS SCIENCE↗

Cosmic axions revealed via amplified modulation of the ellipticity of a laser

We propose a new axion dark matter detection strategy that employs optical readout of laser beam ellipticity modulations caused by axion-induced electric fields in a microwave cavity, using electro-optic (EO) crystals, enhanced by externally injected radio-frequency (rf) power. Building upon the variance-based probing method [Phys. Rev. D 107, 103005 (2023).], we extend this concept to the optical domain: A weak probe laser interacts with an EO crystal coupled to the resonant microwave cavity field at cryogenic temperatures, and the axion-induced electric field is revealed through induced ellipticity. The injected rf signal coherently interferes with that of the axion field, amplifying the optical response and significantly improving sensitivity. While our EO-based method employs a Fabry-Pérot resonator, we do not require Michelson interferometers. Our method, hence, enables compact, high-frequency axion searches, across the 0.5–50 GHz range. Operating at cryogenic temperatures not only suppresses thermal backgrounds, but, critically, allows the probing method to mitigate the quantum noise. This approach offers a scalable path forward for axion detection over the ∼(few−200) μ⁢eV mass range—covering the preferred parameter space for the postinflationary Peccei-Quinn axion dark matter—using compact, tunable systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Development of random geometry capability in RMC code for explicit analysis of polytype particle/pebble - 18493

Monte Carlo method plays an important role in accurate simulation of High Temperature Gas-Cooled Reactors (HTR) and molten salt reactors, owing to its advantages of the flexible geometry modeling and the use of continuous-energy nuclear cross sections. For the innovative design of pebble bed, prism HTRs and molten salt reactors, there may be more than one kind of particles or pebbles in the system, such as the burnable poison particles, graphite pebbles or fuel pebbles with different enrichments. Different treatments have been used to deal with the double-heterogeneous geometry of these reactors. In some researches, the particle distributions in stochastic media are assumed the regular lattice, while in the others, the explicit packing methods such as Random Sequential Addition (RSA) and Discrete Element Method (DEM) are used, by generating the random coordinates of the particles/pebbles. However, traditional geometry with repeated structure has difficulties in explicit modeling polytype particle/pebble, due to the arbitrary packing fractions of different kinds of particles or pebbles. Although, packing methods such as Random Sequential Addition (RSA) and Discrete Element Method (DEM) could solve the polytype particle/pebble problems to some extent, but these methods are troublesome in geometry modeling and time consuming. In this paper, a new Random Universe Geometry method was developed and implemented in Monte Carlo code RMC, for explicit analysis of polytype particle/pebble in double heterogeneous geometry systems, such as HTRs and molten salt reactors. This method was applied to constructed mixed particles/pebbles problems and also simplified HTR-10 full core problem to test the feasibility, and the results show that the random geometry modeling can provide explicit packing fraction of different kinds of particles or pebbles. The results are also compared with that calculated by RSA method and regular structure, and agree quite well. This work would provide an effective tool for the innovative design of pebble bed, prism HTRs and molten salt reactors with polytype particles or pebbles using Monte Carlo method. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Measurement of temperature and density using non-collective X-ray Thomson scattering in pulsed power produced warm dense plasmas

We present the first experimental measurement of temperature and density of a warm dense plasma produced by a pulsed power driver at the Nevada Terawatt Facility (NTF). In the early phases of discharge, most of the mass remains in the core, and it has been challenging to diagnose with traditional methods, e.g. optical probing, because of the high density and low temperature. Accurate knowledge of the transport coefficients as well as the thermodynamic state of the plasma is important to precisely test or develop theoretical models. Here, we have used spectrally resolved non-collective X-ray Thomson scattering to characterize the dense core region. We used a graphite load driven by the Zebra current generator (0.6 MA in 200 ns rise time) and the Ti He-α line produced by irradiating a Ti target with the Leopard laser (30 J, 0.8 ns) as an X-ray probing source. Using this configuration, we obtained a signal-to-noise ratio ~2.5 for the scattered signal. Finally, by fitting the experimental data with predicted spectra, we measured T = 2±1.9 eV, ρ = 0.6±0.5 gr/cc, 70 ns into the current pulse. The complexity of the dense core is revealed by the electrons in the dense core that are found to be degenerate and weakly coupled, while the ions remain highly coupled.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗