Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hydrogen Development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Leak Detection and H 2 Sensor Development

Low-cost, durable, and reliable Hydrogen safety sensor for vehicle, stationary, and infrastructure applications. A new zirconia, electrochemical-based sensor technology is being transitioned out of the laboratory and into an advanced testing phase for vehicular and stationary H 2 safety applications. Mixed potential sensors are a class of electrochemical devices that develop an open-circuit electromotive force due to the difference in the kinetics of the redox reactions of various gaseous species at each electrode/electrolyte/gas interface, referred to as the triple phase boundary (TPB). Therefore, these sensors have been considered for the sensing of various reducible or oxidizable gas species in the presence of oxygen. Based on this principle, a unique sensor design was developed by LANL and LLNL. The uniqueness of this sensor derives from minimizing heterogeneous catalysis (detrimental to sensor response) by avoiding gas diffusion through a catalytically active material and minimizing diffusion path to the TPB. Unlike the conventional design of these devices that use a dense solid electrolyte and porous thin film electrodes (similar to the current state-of-the-art zirconia-based sensors and fuel cells), the design of this sensor uses dense electrodes and porous electrolytes. Such a sensor design facilitates a stable and reproducible device response, since dense electrode morphologies are easy to reproduce and are significantly more stable than the conventional porous morphologies. Moreover, these sensors develop higher mixed potentials since the gas diffusion is through the less catalytically active electrolyte than the electrode. Lastly, the choice of electrodes is primarily based on their O2 reduction kinetics and catalytic properties vis-a-vis the target gas of interest.

08 HYDROGEN↗

Kinetic Monte Carlo Simulation of Hydrogen Diffusion in Tungsten

Nuclear fusion is considered as the most promising sustainable energy source. If achieved, it could provide electricity to the mankind for millions of years. During the reaction, the fusion ash is continuously removed from the magnetic gap, the divertor region, and the divertor facing component is subjected to intense plasma bombardment. It is proposed to use tungsten as the divertor facing material, because it has low physical sputtering yield and superior thermomechanical properties. However, the high mobility of hydrogen in tungsten and the high bombardment flux bring the hydrogen isotopes deep into the tungsten tile. The presence of hydrogen in tungsten tends to weaken the gram boundaries and produce surface blistering. The ejection of tungsten particulates into the plasma core will cool the reaction and cease the fusion reactions. Therefore, it is important to have a detailed understanding of the hydrogen diffusion in tungsten bulk. The KMC method is a stochastic computer simulation to predict the time evolution of a certain system. Typically, at a given time, the system will evolve through a few possible paths with known probabilities. In each step, the KMC method analyzes the entire system and randomly determines the system evolving events based on all transition rates of all possible events and advance the physical time. This process is repeated till the simulation of the entire physical time is completed. In previous work, the authors developed a kinetic Monte Carlo (KMC) algorithm and program to simulate hydrogen diffusion process on tungsten reconstructed surface. In this article, this KMC method is extended to model the hydrogen diffusion in tungsten bulk. The diffusion coefficients are calculated and fitted to the Arrhenius equation. The result matches the experiment measurement very well. KMC diffusion simulation needs the locations of the hydrogen trapping sites, diffusion paths and the corresponding diffusion energy barriers. The hydrogen interstitial sites in tungsten crystal have been thoroughly studied by density function theory (DFT) and molecular dynamics (MD). Johnson and Carter used DFT to determine the preferred location of the hydrogen interstitial sites m tungsten crystal, which are the tetrahedral sites (T-sites) in body-centered-cubic (bcc) lattice surfaces. All T-sites are located on the surfaces of a lattice cell. There are four T-sites per surface and twelve T-sites per lattice cell. The hydrogen atoms diffuse by traveling from one T-site to one of its nearest four T-site neighbors. Thus, each T-site is surrounded by two neighbors on the same surface, and one neighbor on each of the two adjacent surfaces perpendicular to the surface holding the center T-site. The diffusion barrier between two neighboring T-sites was calculated to be 0.38 eV. Knowing the diffusion path, energy barrier, and the crystal structure, the KMC simulation is readily to be performed. Based on other researchers' DFT calculations, the hydrogen stable interstitial site in tungsten bulk is determined as the tetrahedral site on the surface of the bee lattice. Each T-site has 4 neighbors and the energy barrier between two adjacent T-sites are estimated to be 0.38 eV. Based on those facts and the KMC theory, a MATLAB program is developed to model the hydrogen diffusion in tungsten bulk. In the MATLAB program, substrate temperature, hydrogen concentration, physical time to be simulated, and the number of cycles are all customizable. To compare the KMC determined diffusion coefficients with experiment results in the literature, the simulations are performed for temperature 300 K - 2500 K and low hydrogen concentration (0.1%), mimicking the experiment condition. The calculated diffusion coefficients match the reference values measured by the experiment under low hydrogen concentration condition. The results are also fitted to the Arrhenius equation. The pre-exponential factor and the average activation energy in Arrhenius equation are obtained. The good agreement between simulation and experiment proves that the developed KMC algorithm truly reflect the well-established theory of interstitial hydrogens in tungsten. The developed program could easily be used to model the diffusion process and predict the diffusion coefficients under other concentrations and temperatures. This work is part of the ongoing development of hydrogen diffusion in tungsten integrating surface diffusion (previous work), bulk diffusion (this work), and adsorption/desorption on surface (future work)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

System Engineering a Solar Thermal Propulsion Mission Concept for Rapid Interstellar Medium Access

The interstellar medium (ISM) represents the next frontier in space exploration, with many new discoveries to be made. The challenge, being so far away from Earth, the ISM requires many decades to reach. To advance our knowledge of what exists beyond our Solar System, new approaches for rapid access are required. One such approach is solar thermal propulsion (STP). The approach uses several Venus and Earth gravity assists to fly to Jupiter and use its gravity well to dive towards the Sun. Approaching within 3 solar radii a perihelion burn would be performed, maximizing the spacecraft’s ΔV to achieve high Solar System escape velocities. A unique aspect of the STP mission concept is that the Sun is not only used as a gravity well for an Oberth manoeuvre, but also to heat the fuel to ultra-high-temperatures (>3000 K), enabling a monopropellant burn with high specific impulse (Isp). Prior preliminary studies indicated escape velocities of over 20 astronomical unit (AU)/yr would be possible. An in-depth modelling exercise was undertaken to determine how such a system would perform. The model in this paper showed the current STP design is capable of providing just under 9±1 AU/yr, but there are many technology developments that could increase escape velocity. The technologies vary from items that could be implemented in the near term, like turbo-pumps driven by the hydrogen, to items requiring more extensive development programs like thin coatings which do not erode in superheated hydrogen. After reviewing the STP approach, and comparing it to a solid rocket motor (SRM), it was found that with currently available technology, SRM outperforms STP with an escape velocity of approximately 10-12 AU/yr. However, future advances in heat exchanger lining materials, turbo pumps, and advanced heat exchanger geometries may enable solar thermal propulsion to provide higher escape velocities, providing one of the fastest ways to exit the solar system. Ultimately, if all technology paths could be implemented with minimal side effects, the performance in a best-case scenario could reach up to 16 AU/yr.

Alkalai, Leon↗

H2@PORTS Workshop Summary Report

This report serves as the workshop proceedings of the H2@Ports Workshop held by the U.S. Department of Energy (DOE) Fuel Cell Technologies Office, the U.S. Department of Transportation (DOT) Maritime Administration (MARAD), and the European Union Fuel Cells and Hydrogen Joint Undertaking (FCH JU) on September 10-12, 2019 at the Marines’ Memorial Club & Hotel in San Francisco, CA. The Workshop was held to identify opportunities, barriers to adoption, and research needs to accelerate technology development and industry commercialization of hydrogen and fuel cell systems in maritime applications. Experts and stakeholders from industry, government, and academia met to discuss the current state-of-the-art of hydrogen and fuel cell technologies and the requirements for using these technologies in port-side and ship-board maritime applications. This report summarizes the discussions and diverse opinions expressed at the Workshop.

08 HYDROGEN↗

High-Efficiency and Low-Carbon Energy Storage and Power Generation System for Electric Aviation

This report summarizes the work performed by University of California San Diego (UCSD) – Honeywell Aerospace (Honeywell) team for the U.S. Department of Energy/Advanced Research Projects Agency-Energy (DOE/ARPA-E) under Phase 1 (April 2021 – October 2023) project, Cooperative Agreement DE-AR0001347 entitled “High-Efficiency and Low-Carbon Energy Storage and Power Generation System for Electric Aviation”. The main objective of this project is to develop and demonstrate an energy storage and power generation (ESPG) system operating on bio liquid natural gas (LNG) for electric aviation applications. The ESPG system concept in this project is a fuel cell, battery, and gas turbine hybrid system that incorporates an innovative solid oxide fuel cell (SOFC) technology. This SOFC technology has two main novel elements: (i) a lightweight and compact stack architecture that consists of cells and cell modules in electrical parallel and series connections (the module design) and (ii) exceptionally high performance, direct methane thin-film cells on porous substrate made by sputtering deposition process. This fuel cell has the specific power and volumetric power density suitable for electric aviation applications. Based on the current status of the SOFC technology, the Phase 1 work focused on the following activities: (i) ESPG System Modeling – to design and optimize an aircraft SOFC-based ESPG system concept that met the performance, weight and cost targets; (ii) Cell Material Development and Scaleup – to demonstrate scalability of the sputtering process for manufacture of thin-film SOFC cells of practical sizes, confirm the exceptional performance of sputtered cells, improve cell stability and durability for operation with hydrogen and methane fuel, and develop a suitable electrically conducting porous substrate to replace the current non-conducting ceramic substrate; (iii) Stack Development – to design and manufacture stack components for the stack architecture, evaluate and select a suitable sealant, and build and operate multi-cell stacks to demonstrate stack operation, and (iv) Technology to Market – to develop business models and commercialization plans, conduct various market and technology analysis and estimate SOFC and ESPG system costs.

25 ENERGY STORAGE↗

Development & Optimization of Materials and Processes for a Cost Effective Photoelectrochemical Hydrogen Production System. Final report

The overall project objective was to apply high throughput experimentation and combinatorial methods together with novel syntheses to discover and optimize efficient, practical, and economically sustainable materials for photoelectrochemical production of bulk hydrogen from water. Automated electrochemical synthesis and photoelectrochemical screening systems were designed and constructed and used to study a variety of new photoelectrocatalytic materials. We evaluated photocatalytic performance in the dark and under illumination with or without applied bias in a high-throughput manner and did detailed evaluation on many materials. Significant attention was given to -Fe2O3 based semiconductor materials and thin films with different dopants were synthesized by co-electrodeposition techniques. Approximately 30 dopants including Al, Zn, Cu, Ni, Co, Cr, Mo, Ti, Pt, etc. were investigated. Hematite thin films doped with Al, Ti, Pt, Cr, and Mo exhibited significant improvements in efficiency for photoelectrochemical water splitting compared with undoped hematite. In several cases we collaborated with theorists who used density functional theory to help explain performance trends and suggest new materials. The best materials were investigated in detail by X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet-visual spectroscopy (UV-Vis), X-ray photoelectron spectroscopy (XPS). The photoelectrocatalytic performance of the thin films was evaluated and their incident photon

08 HYDROGEN↗

Development of Comprehensive Detailed and Reduced Reaction Mechanisms for Syngas and Hydrogen Combustion

The collaborative research initiative culminated in amassing a substantial combustion database of experimental results for dry and moist mixtures of syngas and hydrogen (SGH), including autoignition times using a rapid compression machine as well as laminar flame speeds using a counterflow twin-flame configuration. These experimental data provided the basis for assessment of the kinetics of SGH combustion at elevated pressures using global uncertainty analysis methods. A review of the fundamental combustion characteristics of H{sub 2}/CO mixtures, with emphasis on ignition and flame propagation at high pressures was also conducted to understand the state of the art in SGH combustion. Investigation of the reaction kinetics of CO+HO{sub 2}{center_dot} {yields} CO{sub 2} + {center_dot}OH and HO{sub 2}+OH {yields} H{sub 2}O+O{sub 2} by ab initio calculations and master equation modeling was further carried out in order to look into the discrepancies between the experimental data and the results predicted by the mechanisms.

08 HYDROGEN↗

Low Noble Metal Content Catalysts/Electrodes for Hydrogen Production by Water Electrolysis, Phase II 2013-2015: Anode catalysts/electrodes development at Brookhaven National Laboratory

BNL’s efforts in Phase II are mainly on developing anode catalysts/electrodes with a target of 80% reduction of IrO 2 loading to about 0.8 mg cm -2 without compromising the performance as compared to the baseline. In carrying out the first task, we found insufficient benefits from using either TiO 2 or CsO 2 as support for our synthesized Ru@Ir core-shell nanocatalysts. The supports also add variables and uncertainties in experiments, making in-depth analyses difficult. Thus, we chose to go with unsupported catalysts. The second task/milestone of fabricating gas diffusion electrodes (GDEs) with uniform and robust catalyst layers was completed. Along the way we established a procedure for testing anode GDEs for oxygen evolution reaction (OER) in a solution electrochemical cell. As detailed in the 2014 report, the baseline in solution test allowed us to prescreen and optimize GDE samples before more costly membrane electrode assembly (MEA) test and to obtain iR-corrected OER polarization curves for kinetic analysis. In this final report, we summarize the results of two most promising approaches in developing low-Ir-loading anodes.

99 GENERAL AND MISCELLANEOUS↗

Development of a para-orthohydrogen catalytic converter for a solid hydrogen cooler

Design features of a tested catalytic converter for altering vented cryogenic parahydrogen used as a coolant on spacecraft into a para-ortho equilibrium for channeling to other cooling functions are described. The hydrogen is expected to be stored in either liquid or solid form. A high surface area Ni-on-Si catalyst was selected for tests at an operating pressure of 2 torr at a ratio of 1000 gr catalyst for a gr/sec hydrogen flow. Cylindrical and radial flow geometries were tried and measurements centered on the converter efficiencies at different operating temperatures when the converter was placed in the vent line of the H2 cooler. Efficiencies ranging from 10-100 percent were obtained for varying flow rates. Further testing is necessary to characterize the converter performance under a wider range of operating temperatures and environments.

Nast, T. C.↗

Sabatier Reactor System Integration with Microwave Plasma Methane Pyrolysis Post-Processor for Closed-Loop Hydrogen Recovery

The Carbon Dioxide Reduction Assembly (CRA) designed and developed for the International Space Station (ISS) represents the state-of-the-art in carbon dioxide reduction (CDRe) technology. The CRA produces water and methane by reducing carbon dioxide with hydrogen via the Sabatier reaction. The water is recycled to the Oxygen Generation Assembly (OGA) and the methane is vented overboard resulting in a net loss of hydrogen. The proximity to earth and the relative ease of logistics resupply from earth allow for a semi-closed system on ISS. However, long-term manned space flight beyond low earth orbit (LEO) dictates a more thoroughly closed-loop system involving significantly higher recovery of hydrogen, and subsequent recovery of oxygen, to minimize costs associated with logistics resupply beyond LEO. The open-loop ISS system for CDRe can be made closed-loop for follow-on missions by further processing methane to recover hydrogen. For this purpose, a process technology has been developed that employs a microwave-generated plasma to reduce methane to hydrogen and acetylene resulting in 75% theoretical recovery of hydrogen. In 2009, a 1-man equivalent Plasma Pyrolysis Assembly (PPA) was delivered to the National Aeronautics and Space Administration (NASA) for technical evaluation. The PPA has been integrated with a Sabatier Development Unit (SDU). The integrated process configuration incorporates a sorbent bed to eliminate residual carbon dioxide and water vapor in the Sabatier methane product stream before it enters the PPA. This paper provides detailed information on the stand-alone and integrated performance of both the PPA and SDU. Additionally, the integrated test stand design and anticipated future work are discussed.

Abney, Morgan B.↗

High performance robust F-doped tin oxide based oxygen evolution electro-catalysts for PEM based water electrolysis

Identification and development of non-noble metal based electro-catalysts or electro-catalysts comprising compositions with significantly reduced amounts of expensive noble metal contents (e.g. IrO{sub 2}, Pt) with comparable electrochemical performance to the standard noble metal/metal oxide for proton exchange membrane (PEM) based water electrolysis would signify a major breakthrough in hydrogen generation via water electrolysis. Development of such systems would lead to two primary outcomes: first, a reduction in the overall capital costs of PEM based water electrolyzers, and second, attainment of the targeted hydrogen production costs (<$3.00/gge delivered by 2015) comparable to conventional liquid fuels. In line with these goals, by exploiting a two-pronged theoretical first principles and experimental approach herein, we demonstrate for the very first time a solid solution of SnO{sub 2}:10 wt% F containing only 20 at.% IrO{sub 2} [e.g. (Sn{sub 0.80}Ir{sub 0.20})O{sub 2}:10F] displaying remarkably similar electrochemical activity and comparable or even much improved electrochemical durability compared to pure IrO{sub 2}, the accepted gold standard in oxygen evolution electro-catalysts for PEM based water electrolysis. We present the results of these studies.

08 HYDROGEN↗

Boron-Based Hydrogen Storage: Ternary Borides and Beyond

DOE continues to seek reversible solid-state hydrogen materials with hydrogen densities of ≥11 wt% and ≥80 g/L that can deliver hydrogen and be recharged at moderate temperatures (≤100 °C) and pressures (≤100 bar) enabling incorporation into hydrogen storage systems suitable for transportation applications. Boron-based hydrogen storage materials have the potential to meet the density requirements given boron’s low atomic weight, high chemical valance, and versatile chemistry. However, the rates of hydrogen exchange in boron-based compounds are thus far much too slow for practical applications. Although contributing to the high hydrogen densities, the high valance of boron also leads to slow rates of hydrogen exchange due to extensive boron-boron atom rearrangements during hydrogen cycling. This rearrangement often leads to multiple solid phases occurring over hydrogen release and recharge cycles. These phases must nucleate and react with each other across solid-solid phase boundaries leading to energy barriers that slow the rates of hydrogen exchange. This project sought to overcome the slow rates of hydrogen exchange in boron-based hydrogen storage materials by minimizing the number of solid phases and the boron atom rearrangement over a hydrogen release and recharge cycle. Two novel approaches were explored: 1) developing matched pairs of ternary borides and mixed-metal borohydrides that could exchange hydrogen with only one hydrogenated phase (the mixed-metal borohydride) and only one dehydrogenated phase (the ternary boride); and 2) developing boranes that could release hydrogen by being lithiated using lithium hydride with no boron-boron atom rearrangement.

08 HYDROGEN↗

Guide to Permitting Hydrogen Motor Fuel Dispensing Facilities

The purpose of this guide is to assist project developers, permitting officials, code enforcement officials, and other parties involved in developing permit applications and approving the implementation of hydrogen motor fuel dispensing facilities. The guide facilitates the identification of the elements to be addressed in the permitting of a project as it progresses through the approval process; the specific requirements associated with those elements; and the applicable (or potentially applicable) codes and standards by which to determine whether the specific requirements have been met. The guide attempts to identify all applicable codes and standards relevant to the permitting requirements.

08 HYDROGEN↗