Search NASA⌕ Search

SEARCH · Search NASA

Results for “Level density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Macroscopic Traffic Modeling Using Probe Vehicle Data: A Machine Learning Approach

Abstract The macroscopic fundamental diagram (MFD) captures an orderly relationship among traffic flow, density, and speed at the network level. It is a simple yet powerful tool for modeling traffic dynamics in large urban networks with broad application in traffic control and management. However, empirically derived MFDs in urban regions require high-resolution traffic data from the network. Having the network flow and vehicular density estimated at the (granular) census tract level using vehicle probe data, we apply machine learning methods to predict the MFDs across U.S. urban areas and capture the impacts of location-specific input features on the network flow–density relationships at a large scale. The results show that, among the four tested machine learning approaches (Random Forest, XGBoost, Support Vector Machine, and Neural Network), XGBoost delivers the best performance in predicting network traffic flow based on vehicular density and location attributes. Using interaction Shapley Additive explanation (SHAP) values and partial correlation analysis, we examine the factors influencing MFD shapes across different locations. Our empirical findings reveal that across U.S. urban areas, network topology, transportation infrastructure, and land use are primary factors shaping MFD curves, while demand and trip-related factors play a lesser role. Specifically, higher ranking roads, centrality, and development levels correlate positively with network capacity and critical density, whereas negative associations are observed for network connectivity, mixed-use development, and road roughness levels.

Jin, Ling↗

Insights into the Na + Storage Mechanism of Phosphorus-Functionalized Hard Carbon as Ultrahigh Capacity Anodes

Hard carbon as a typical anode material for sodium ion batteries has received much attention in terms of its low cost and renewability. Herein, phosphorus-functionalized hard carbon with a specific honeycomb briquette shaped morphology is synthesized via electrospinning technology. When applied as an anode material for Na + storage, it exhibits an impressively high reversible capacity of 393.4 mA h g -1 with the capacity retention up to 98.2% after 100 cycles. According to first-principle calculation, the ultrahigh capacity of the as-prepared anode is ascribed to the enhancement of Na-absorption through formation of P=O and P-C bonds in graphitic layers when doped with phosphorus. Furthermore, the increase of electron density around the Fermi level is found to be mainly caused by O atoms instead of P atoms.

25 ENERGY STORAGE↗

UEDGE modelling of detached divertor operation for long-leg divertor geometries in ARC

In this work, simulations of the ARC scrape-off layer and divertor configuration are carried out using UEDGE to perform the first power-handling assessment for the divertor design. A convective–diffusive anomalous transport model is implemented in the code to reproduce the radial plasma profiles anticipated for the device at the outer mid-plane. Levels of exhaust power from the core are varied, and a 0.5% fixed fraction neon impurity seeding is included in investigations to find steady-state detached solutions. Initial studies employing a super-X divertor configuration have shown that a stable detached divertor-operational window exists for reactor exhaust powers in the range of 72–92 MW, which is close to projected levels of exhaust power of 105 MW across the separatrix anticipated for ARC. Under these conditions, the divertor heat flux is fully dissipated by radiation and radial losses to the sidewalls of the divertor channel, leading to acceptable levels of power flux density on plasma-facing components. Simulations are being extended to study the performance of the X-point target geometry and to explore the sensitivity to the physics model and input parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Survey of Transparent Conducting Films and Optoelectrical Materials for High Optical Power Applications

The lifetime laser damage performance of a wide range of transparent conductive materials is assessed, including ultrathin metal films, doped metal oxides, doped compound semiconductors, and graphene whose carrier densities span five orders of magnitude from 10 18 to 10 23 cm -3 . Lifetime laser damage thresholds are determined by exposing material surfaces to repeated nanosecond laser pulses at near IR wavelengths (1064 nm). Near threshold fluences, two distinct damage modes, i.e., bulk and discrete, emerge depending on carrier density. These bulk and discrete damage modes are attributed to free carrier-induced bulk and localized, defect-driven absorption processes, respectively. For polycrystalline films with free carrier densities greater than ≈10 20 cm -3 , laser damage thresholds are less than 5 J cm -2 . In contrast, bulk absorption is not apparent at thresholds substantially higher than ≈10 J cm-2 in single-crystal films with free carrier concentrations lower than ≈10 19 cm -3 . By increasing thickness, films with lower carrier densities can deliver relevant levels of sheet conductance (<200 Ω sq -1 ) while remaining transparent. These lifetime laser damage threshold measurements offer systematic criteria to select materials aimed at handling high optical powers in optoelectronics devices and emerging plasmonic and metamaterials for lasers.

36 MATERIALS SCIENCE↗

Understanding the role of segmentation on process-structure–property predictions made via machine learning

Here, the present study investigated the effect of porosity surface determination methods on performance of machine learning models used to predict the tensile properties of AlSi10Mg processed by laser powder bed fusion from micro-computed tomography data. Machine learning models applied in this work include support vector machines, neural networks, decision trees, and Bayesian classifiers. The effects of isosurface thresholding and local gradient approaches for porosity segmentation, as well as image filtering schemes, on model precision were evaluated for samples produced under differing levels of global energy density.

36 MATERIALS SCIENCE↗

Pairing and Short-Range Correlations in Nuclear Systems

The structure and density dependence of the pairing gap in infinite matter is relevant for astrophysical phenomena and provides a starting point for the discussion of pairing properties in nuclear structure. Short-range correlations can significantly deplete the available single-particle strength around the Fermi surface and thus provide a reduction mechanism of the pairing gap. Here, we study this effect in the singlet and triplet channels of both neutron matter and symmetric nuclear matter. Our calculations use phase-shift equivalent interactions and chiral two-body and three-body interactions as a starting point. We find an unambiguous reduction of the gap in all channels with very small dependence on the NN force in the singlet neutron matter and the triplet nuclear matter channel. In the latter channel, SRC alone provide a 50% reduction of the pairing gap.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comparative Study of Oxides Formed on Fusion Zone and Base Metal of Laser Welded Zr-1.0Sn-1.0Nb-0.1Fe Alloy

Numerous studies have primarily focused on the corrosion mechanism of zirconium alloy base metal. However, the corrosion resistance of weld beads or seams is of vital importance in the degradation of structural components in the reactor. In the present work, the corrosion resistance of the fusion zone and base metal of laser welded zirconium alloy joints was comparatively investigated. The microstructure morphologies, phase structures and strain fields of oxide films formed on fusion zone and base metal were observed and analyzed. The oxide thickness of the fusion zone was thicker than that of the base metal with prolonged corrosion. Compared to the base metal, the lower density of dislocations and level of strain values in the oxide film of the fusion zone indicated that the stress in the oxide film was lower. The phase transition from the tetragonal ZrO{sub 2} to the monoclinic ZrO{sub 2} could be suppressed due to the high level of stress, resulting in the better corrosion resistance of the base metal. Moreover, the second phase particles and non-βZr phase in the base metal contributed to the better corrosion resistance.

36 MATERIALS SCIENCE↗

Dyslipidemia Profiles in Patients with Peripheral Artery Disease

Purpose of Review: This review of the literature aims to discuss the evidence linking different lipid and apolipoprotein measures to peripheral artery disease. Recent Findings: Measures of atherogenic dyslipidemia, including elevations in total cholesterol and total cholesterol/high-density lipoprotein cholesterol as well as low levels of high-density lipoprotein cholesterol, are strongly associated with future risk of peripheral artery disease. Compared to coronary artery disease, there are fewer data showing an association between low-density lipoprotein cholesterol and future risk of peripheral artery disease. Novel lipid measures, including nuclear magnetic resonance-derived lipoproteins and oxidized lipids, may lead to better assessments of future peripheral artery disease risk. Summary: These data highlight the important differences between lipid risk factors for peripheral and coronary artery disease. Improved understanding of these distinctions may lead to new therapeutic options for patients with peripheral artery disease.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Effects of vacuum fluctuation suppression on atomic decay rates

Highlights: > Excited atoms are shot through a cavity containing an electromagnetic field. > Cavity is in the lowest mode in a non-classical state. > Such a state can suppress the decay rate of the atoms in certain situations. > We show that this effect can be correlated with periods of negative energy density. - Abstract: The use of atomic decay rates as a probe of sub-vacuum phenomena will be studied. Because electromagnetic vacuum fluctuations are essential for radiative decay of excited atomic states, decay rates can serve as a measure of the suppression of vacuum fluctuations in non-classical states, such as squeezed vacua. In such states, the renormalized expectation value of the square of the electric field or the energy density can be periodically negative, representing suppression of vacuum fluctuations. We explore the extent to which atomic decays can be used to measure the mean squared electric field or energy density. We consider a scheme in which atoms in an excited state transit a closed cavity whose lowest mode contains photons in a non-classical state. A crucial feature of our analysis is that we do not employ the rotating wave approximation. The change in the decay probability of the atom in the cavity due to the non-classical state can, under certain circumstances, serve as a measure of the mean squared electric field or energy density in the cavity. We make some estimates of the magnitude of this effect, which indicate that an experimental test might be possible, although very challenging.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Full spectrum light driven photocatalytic in-situ epitaxy of one-unit-cell Bi 2 O 2 CO 3 layers on Bi 2 O 4 nanocrystals for highly efficient photocatalysis and mechanism unveiling

In-situ epitaxial growth is a fascinating strategy to nicely couple two low dimensional semiconductors as highly efficient composite photocatalysts. Meanwhile, organic contaminants in the photocatalytic process are usually decomposed into greenhouse gas (CO 2 ) that can’t be reused. Herein, we reported a green full spectrum light (UV, visible and NIR lights) induced epitaxial growth strategy to synthesize highly efficient Bi 2 O 4 /Bi 2 O 2 CO 3 heterostructure photocatalyst by reusing waste carbon source, in which one-unit-cell Bi 2 O 2 CO 3 layers (1.0 nm) in-situ grew on the surface of Bi 2 O 4 nanocrystals during the photocatalytic degradation of rhodamine B (RhB) or phenol. More importantly, 13 C nuclear magnetic resonance (NMR) spectroscopy confirmed that the carbon element in Bi 2 O 2 CO 3 was from the photocatalytic degradation of organic contaminations. Furthermore, density functional theory (DFT) calculations confirm that the Bi 2 O 4 nanocrystals with exposed {-101} facets have the larger percentage of undercoordinated Bi atoms, which provided favorable conditions for the in-situ epitaxy of Bi 2 O 2 CO 3 during the photocatalytic reaction. Additionally, the increased charge density near the Fermi level resulted in improved photoresponsivity of Bi 2 O 4 /Bi 2 O 2 CO 3 composite and the coalescence of Bi 2 O 4 and Bi 2 O 2 CO 3 could favor the travel of photogenerated carriers from one to another owing to the close work functions for Bi 2 O 4 (4.295 eV) and Bi 2 O 2 CO 3 (4.410 eV). As we expected, the Bi 2 O 4 /Bi 2 O 2 CO 3 composite presented higher photocatalytic activity for phenol and ciprofloxacin (CIP) degradation than pure Bi 2 O 4 nanocrystals. The possible degradation pathway of CIP in aqueous solution and photocatalytic mechanism of Bi 2 O 4 /Bi 2 O 2 CO 3 composite were also proposed based on liquid chromatography mass spectrometer (LC–MS) analysis and experimental results. Furthermore, this work provides a green strategy for designing highly efficient photocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-resolution infrared spectra of bicyclo[1.1.1]pentane

Infrared spectra of bicyclo[1.1.1]pentane (C5H8) have been recorded at a resolution (0.0015 cm-1) sufficient to resolve for the first time individual rovibrational lines. This initial report presents the ground state constants for this molecule determined from the detailed analysis of three of the ten infrared-allowed bands, v14(e') at 540 cm-1, v17(a2'') at 1220 cm-1, v18(a2'') at 832 cm-1, and a partial analysis of the v11(e') band at 1237 cm-1. The upper states of transitions involving the lowest frequency mode, v14(e'), show no evidence of rovibrational perturbations but those for the v17 and v18 (a2'') modes give clear indication of Coriolis coupling to nearby e' levels. Accordingly, ground state constants were determined by use of the combination-difference method for all three bands. The assigned frequencies provided over 3300 consistent ground state difference values, yielding the following constants for the ground state (in units of cm-1): B0 = 0.2399412(2), DJ = 6.024(6) x 10-8, DJK = -1.930(21) x 10-8. For the unperturbed v14(e') fundamental, more than 3500 transitions were analyzed and the band origin was found to be at 540.34225(2) cm-1. The numbers in parentheses are the uncertainties (two standard deviations) in the values of the constants. The results are compared with those obtained previously for [1.1.1]propellane and with those computed at the ab initio anharmonic level using the B3LYP density functional method with a cc-pVTZ basis set.

74 ATOMIC AND MOLECULAR PHYSICS↗

High-Resolution Infrared Spectra of Spiropentane, C5H8

Infrared spectra of spiropentane (C{sub 5}H{sub 8}) have been recorded at a resolution (0.002 cm{sup -1}) sufficient to resolve for the first time individual rovibrational lines. This initial report presents the ground state constants for this molecule determined from the detailed analysis of the {nu}16 (b2) parallel band at 993 cm{sup -1}. In addition, the determination included more than 2000 ground state combination-differences deduced from partial analyses of four other infrared-allowed bands, the {nu}24(e) perpendicular band at 780 cm{sup -1} and three (b2) parallel bands at 1540 cm{sup -1} ({nu}14), 1568 cm{sup -1} ({nu}5+{nu}16), and 2098 cm{sup -1} ({nu}5+{nu}14). In each of the latter four cases, the spectra show complications; in the case of {nu}24, these complications are due to rotational l-type doublings, and in the case of the parallel bands, the spectral complexities are due to Fermi resonance and Coriolis interactions of the upper states with nearby levels. The unraveling of these is underway but the assignment of many of these transitions permit the confident use of the ground state differences in determining the following constants for the ground state (in units of cm{sup -1}): B0 = 0.1394736(2), DJ = 2.458(1) x 10{sup -8}, DJK = 8.28(3) x 10{sup -8}. For the unperturbed {nu}16 fundamental, more than 3000 transitions were fit and the band origin was found to be at 992.53793(2) cm{sup -1}. The numbers in parentheses are the uncertainties (two standard deviations) in the value of the last digit of the constants. Surprisingly, the very accurate B0 value measured here is lower than the value (0.1418 cm{sup -1}) calculated from an electron diffraction structure, instead of being higher, as expected. Where possible, the rovibrational results are compared with those computed at the anharmonic level using the B3LYP density functional method with a cc-pVTZ basis set. These too suggest that the electron diffraction results are in question.

74 ATOMIC AND MOLECULAR PHYSICS↗

High-Resolution Infrared Studies of Perdeutero-Spiropentane, C 5 D 8

Perdeutero-spiropentane (C 5 D 8 ) has been synthesized and infrared and Raman spectra are reported for the first time. Wavenumber assignments are made for most of the fundamental vibrational modes. Gas phase infrared spectra were recorded at a resolution (0.002 cm -1 ) sufficient to resolve individual rovibrational lines and show evidence of strong Coriolis and/or Fermi resonance interactions for most bands. However a detailed rovibrational analysis of the fundamental v 15 (b 2 ) parallel band proved possible and a fit of more than 1600 lines yielded a band origin of 1053.84465(10) cm -1 and ground state constants (in units of cm -1 ): B 0 = 0.1120700(9), D J = 1.51(3) x10 -8 , D JK = 3.42(15) x10 -8 . We note that the B 0 value is significantly less than a value of Ba = 0.1140 cm-1 calculated using structural parameters from an earlier electron diffraction (ED) study, whereas one expects B a to be lower than B 0 because of thermal averaging over higher vibrational levels. A similar discrepancy was noted in an earlier study of C 5 H 8 [1]. The structural and spectroscopic results are in good accord with values computed at the anharmonic level using the B3LYP density functional method with a cc-pVTZ basis set.

C5H8 and C5D8↗

The effect of postprocessing on tensile property and microstructure evolution of friction stir welding aluminum alloy joint

Friction stir welding is an efficient manufacturing method for joining aluminum alloy and can dramatically reduce grain size conferring excellent plastic deformation properties. Consequently, friction stir welding is used to manufacture tailor welded blanks to optimize weight or performance in the final component. In the study, the microstructural evolution and mechanical properties of friction stir welding joint during plastic forming and subsequent heat treatment were investigated. The microstructural characteristics of the friction stir welding joints were studied by Electron Backscattered Diffraction and Transmission Electron Microscopy. The mechanical properties were evaluated by tensile and microhardness tests. It is found that the tensile and yield strengths of friction stir welding joints are significantly improved after severe plastic deformation due to the grain refinement. Following heat treatment, the strength of the friction stir welding joints significantly decrease due to the obvious abnormal grain growth. Careful attention must be given to the processing route of any friction stir welding joint intended for plastic forming, especially the annealing between forming passes. Severe plastic deforming of the friction stir welding joint leads to a high level of stored energy/dislocation density, which causes the abnormal grain growth during subsequent heat treatment, and consequently reduce the mechanical properties of the friction stir welding joint. - Highlights: • Great changes are observed in the microstructure of FSW joint after postprocessing. • Postprocessing shows great effect on the microstructure stability of FSW joint. • The weld shows more significant decrease in strength than the BM due to the AGG. • Attention must be given to the processing route of FSW joint for plastic forming.

36 MATERIALS SCIENCE↗

Effects of Zr addition on lattice strains and electronic structures of NbTaTiV high-entropy alloy

We report the room-temperature (RT) deformation behavior for two single-phase body-centered-cubic (BCC) refractory high-entropy alloys (RHEAs), NbTaTiV and NbTaTiVZr, has been comprehensively investigated via in-situ neutron-diffraction experiments. Our work shows that the addition of Zr leads to the transition of mechanical response from ductile to brittle behavior. The results of lattice-strain evolutions obtained from in-situ neutron diffraction for the ductile NbTaTiV RHEA exhibit atypical plastic-deformation behavior, i.e., the reduced plasticanisotropic deformation, leading to an even distribution of the applied stress amongst the grains with different orientations rather than forming stress concentrations in {200}-oriented grains during plastic-deformation. Density functional theory (DFT) analysis shows that NbTaTiVZr has a lower electron density at the Fermi level, larger lattice distortion, and stronger charge transfer, as compared to NbTaTiV, suggesting higher strength and lower ductility in NbTaTiVZr, which are consistent with the current experimental results.

36 MATERIALS SCIENCE↗

Accelerated test protocols to predict service life and durability of solid oxide fuel cells

Reliable accelerated test protocols are needed for solid oxide fuel cell research to facilitate rapid learning on key durability issues, identify potential modes of failure expeditiously, and eventually predict the calendar lifetime of an electrochemical cell. In this work, solid oxide fuel cells operated at a constant current density were compared to cells undergoing accelerated measurements, which are composed of intermittent current injection to the cell. A general accelerated test profile was developed by cycling a solid oxide fuel cell from open circuit to a predetermined operating current density that is the same as the current density during a steady-state operation, to accelerate the local redox environment. The following parameters were studied: current density, operation temperature, moist level, sintering temperature, cycling current, cycling frequency, and operation time. Up to 1,320,000 cycles were generated in this work. The cell degradation was accelerated by nearly 10 times, suggesting the feasibility of using this protocol for acceleration test to predict life performance and durability of solid oxide fuel cells.

08 HYDROGEN↗

Differential effects of cobalt and mercury on lipid metabolism in the white adipose tissue of high-fat diet-induced obesity mice

Metals and metalloid species are involved in homeostasis in energy systems such as glucose metabolism. Enlarged adipocytes are one of the most important causes of obesity-associated diseases. In this study, we studied the possibility that various metals, namely, CoCl{sub 2}, HgCl{sub 2}, NaAsO{sub 2} and MnCl{sub 2} pose risk to or have beneficial effects on white adipose tissue (WAT). Exposure to the four metals resulted in decreases in WAT weight and the size of enlarged adipocytes in mice fed a high-fat diet (HFD) without changes in liver weight, suggesting that the size and function of adipocytes are sensitive to metals. Repeated administration of CoCl{sub 2} significantly increased serum leptin, adiponectin and high-density lipoprotein (HDL) cholesterol levels and normalized glucose level and adipose cell size in mice fed HFD. In contrast, HgCl{sub 2} treatment significantly decreased serum leptin level with the down-regulation of leptin mRNA expression in WAT and a reduction in adipocyte size. Next, we tried to investigate possible factors that affect adipocyte size. Repeated exposure to HgCl{sub 2} significantly decreased the expression levels of factors upon the regulation of energy such as the PPARα and PPARγ mRNA expression levels in adipocytes, whereas CoCl{sub 2} had little effect on those genes expressions compared with that in the case of the mice fed HFD with a vehicle. In addition, repeated administration of CoCl{sub 2} enhanced AMPK activation in a dose-dependent manner in the liver, skeletal muscle and WAT; HgCl{sub 2} treatment also enhanced AMPK activation in the liver. Thus, both Co and Hg reduced WAT weight and the size of enlarged adipocytes, possibly mediated by AMKP activation in the mice fed HFD. However, inorganic cobalt may have a preventive role in obesity-related diseases through increased leptin, adiponectin and HDL-cholesterol levels, whereas inorganic mercury may accelerate the development of such diseases. These results may lead to the development of new approaches to establishing the role of metals in adipose tissue of obesity-related diseases. -- Highlights: ► The effects of metals on enlarged white adipose tissue (WAT) were studied. ► As, Hg, Mn and Co ions reduced the size of enlarged adipocytes. ► Co{sup 2+} increased serum leptin and adiponectin levels with AMPK activation in WAT. ► Hg{sup 2+} decreased serum leptin level and leptin mRNA expression in WAT. ► Metal exposure affects the adipocyte size and the function of WAT.

60 APPLIED LIFE SCIENCES↗

Role of Point Defects in Enhancing the Conductivity of BiVO 4

We report that bismuth vanadate is a promising photoanode for solar-to-fuel photocatalytic applications, and it has been extensively studied in recent years. However, the microscopic mechanism underlying the observed changes in electronic conductivity due to oxygen vacancies and nitrogen dopants remains unclear. Here, we combine electronic structure calculations at the hybrid density functional theory (DFT) level with constrained DFT, and we elucidate the role of defects in enhancing the transport properties of the material. We show that at low temperature, oxygen vacancies give rise to deep levels within the fundamental gap of BVO; however even as deep levels, oxygen vacancies can act as effective n-dopants and polaronic charge carriers, due to their favorable position in energy relative to polarons in the pristine bulk. In addition, we show that N atoms can be easily introduced in n-doped BiVO 4 and that the presence of substitutional nitrogen affects the formation energy of polarons, effectively contributing to an increase of the carrier mobility in the material. Lastly, our results reconcile apparently conflicting experiments and they may be generalized to other transition metal oxides, thus providing a foundation for polaronic defect engineering in photoanodes for water photocatalysis.

36 MATERIALS SCIENCE↗