Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC SURFACES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Continuum Gyrokinetic Edge New Technology

COGENT is a simulation code that models the plasma evolution in the edge region of a tokamak fusion reactor, from the open field line scrape-off layer, across the separatrix, and into the core. The model is based on the 4D gyrokinetic closure of the kinetic equations for a plasma coupled to an electrostatic potential field. The background magnetic field is prescribed either analytically or generated from experimental data, and the grid is aligned with magnetic flux surfaces. Multiple collision operator options are provided, from Krook to fully nonlinear Fokker-Planck.

Dorr, M. R.↗

Electrostatic gyrokinetic simulation of global tokamak boundary plasma and the generation of nonlinear intermittent turbulence

Boundary plasma physics plays an important role in tokamak confinement, but is difficult to simulate in a gyrokinetic code due to the scale-inseparable nonlocal multi-physics in magnetic separatrix and open magnetic field geometry. Neutral particles are also an important part of the boundary plasma physics. In the present paper, novel electrostatic gyrokinetic techniques to simulate the ux-driven, low-beta electrostatic boundary plasma is reported. Gyrokinetic ions and drift-kinetic electrons are utilized without scale-separation between the neoclassical and turbulence dynamics. It is found that the nonlinear intermittent turbulence is a natural gyrokinetic phenomenon in the boundary plasma in the vicinity of the magnetic separatrix surface and in the scrape-off layer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Long-term evolution of crustal neutron star magnetic fields

We have derived an analytic solution to the asymptotic behavior of dipolar magnetic fields that are generated in the crusts of neutron stars. We show that if the conductivity is due to impurity scattering, as expected for late stages of evolution, the surface field strength at the magnetic pole declines with the power law B(sub p) approximately = (t/t(sub 0))(exp -2/3). The results are shown to be qualitatively consistent with detailed numerical calculations. These latter results are consistent with some recent analyses of pulsar statistics and the magnetic fields of several binary pulsars with white dwarf companions whose ages have been determined. The dependence of the surface magnetic field on spin period of the pulsar is derived.

Urpin, V. A.↗

COMPARING THE ACCRETION DISK EVOLUTION OF BLACK HOLE AND NEUTRON STAR X-RAY BINARIES FROM LOW TO SUPER-EDDINGTON LUMINOSITY

Low-mass X-ray binaries (LMXBs) are systems in which a low-mass companion transfers mass via Roche-lobe overflow onto a black hole (BH) or a weakly magnetized neutron star (NS). It is believed that both the solid surface and the magnetic field of an NS can affect the accretion flow and show some observable effects. Using the disk emission dominant data, we compare the disk evolution of the two types of systems from low luminosity to super-Eddington luminosity. As the luminosity decreases the disk in the NS LMXB 4U1608-522 begins to leave the innermost stable circular orbit (ISCO) at much higher luminosity ({approx}0.1 L{sub Edd}), compared with BH LMXBs at much lower luminosity ({approx}0.03 L{sub Edd}), due to the interaction between the NS magnetosphere and accretion flow. However, as the luminosity increases above a critical luminosity, the disks in BH and NS LMXBs trace the same evolutionary pattern, because the magnetosphere is restricted inside ISCO, and then both the NS surface emission and (dipole) magnetic field do not significantly affect the secular evolution of the accretion disk, which is driven by the increased radiation pressure in the inner region. We further suggest that the NS surface emission provides additional information about the accretion disk not available in BH systems. Through the observed NS surface emission, we argue that the disk thickness H/R is less than 0.3-0.4, and that the significant outflow from the inner disk edge exists at a luminosity close to Eddington luminosity.

79 ASTRONOMY AND ASTROPHYSICS↗

Random magnetic field and the Dirac Fermi surface

In this paper, we study a single two-dimensional Dirac fermion at finite density, subject to a quenched random magnetic field. At low energies and sufficiently weak disorder, the theory maps onto an infinite collection of 1D chiral fermions (associated to each point on the Fermi surface) coupled by a random vector potential. This low-energy theory exhibits an exactly solvable random fixed line, along which we directly compute various disorder-averaged observables without the need for the usual replica, supersymmetry, or Keldysh techniques. We find the longitudinal dc conductivity in the collisionless $\hbar$ω/k B T→∞ limit to be nonuniversal and to vary continuously along the fixed line.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic-Pulse Shaping of Internal Pipe-Blank Surfaces

A finite-element model is proposed for the shaping of internal pipe-blank surfaces by means of the pressure of a magnetic pulse. The roughness of the internal surface after compression onto a mandrel is expressed as a function of the number of loading cycles, the pressure of the pulsed magnetic field, and the initial roughness of the blank.

42 ENGINEERING↗

Computation of Casimir interactions between arbitrary three-dimensional objects with arbitrary material properties

We extend a recently introduced method for computing Casimir forces between arbitrarily shaped metallic objects [M. T. H. Reid et al., Phys. Rev. Lett. 103 040401 (2009)] to allow treatment of objects with arbitrary material properties, including imperfect conductors, dielectrics, and magnetic materials. Our original method considered electric currents on the surfaces of the interacting objects; the extended method considers both electric and magnetic surface current distributions, and obtains the Casimir energy of a configuration of objects in terms of the interactions of these effective surface currents. Using this new technique, we present the first predictions of Casimir interactions in several experimentally relevant geometries that would be difficult to treat with any existing method. In particular, we investigate Casimir interactions between dielectric nanodisks embedded in a dielectric fluid; we identify the threshold surface-surface separation at which finite-size effects become relevant, and we map the rotational energy landscape of bound nanoparticle diclusters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface structure of neutron stars with high magnetic fields

The equation of state of cold dense matter in strong magnetic fields is calculated in the Thomas-Fermi and Thomas-Fermi-Dirac approximations. For use in the latter calculation, a new expression is derived for the exchange energy of the uniform electron gas in a strong magnetic field. Detailed calculations of the density profile in the surface region of a neutron star are described for a variety of equations of state, and these show that the surface density profile is strongly affected by the magnetic field, irrespective of whether or not matter in a magnetic field has a condensed state bound with respect to isolated atoms. It is also shown that, as a consequence of the field dependence of the screening potential, magnetic fields can significantly increase nuclear reaction rates.

Fushiki, I.↗

Proximity-induced anisotropic magnetoresistance in magnetized topological insulators.

Topological insulators (TIs) host spin-momentum locked surface states that are inherently susceptible to magnetic proximity modulations, making them promising for nano-electronic, spintronic, and quantum computing applications. While much effort has been devoted to studying (quantum) anomalous Hall effects in magnetic magnetically doped TIs, the inherent magnetoresistance (MR) properties in magnetic proximity-coupled surface states remain largely unexplored. Here, we directly exfoliate Bi 2 Se 3 TI flakes onto a magnetic insulator, yttrium iron garnet, and measure the MR at various temperatures. We experimentally observe an anisotropic magnetoresistance that is consistent with a magnetized surface state. Our results indicate that the TI has magnetic anisotropy out of the sample plane, which opens an energy gap between the surface states. Additionally, by applying a magnetic field along any in-plane orientation, the magnetization of the TI rotates toward the plane and the gap closes. Consequently, we observe a large (similar to 6.5%) MR signal that is attributed to an interplay between coherent rotation of magnetization within a topological insulator and abrupt switching of magnetization in the underlying magnetic insulator.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Integrable perturbed magnetic fields in toroidal geometry: An exact analytical flux surface label for large aspect ratio

An analytical description of magnetic islands is presented for the typical case of a single perturbation mode introduced to tokamak plasma equilibrium in the large aspect ratio approximation. Following the Hamiltonian structure directly in terms of toroidal coordinates, the well known integrability of this system is exploited, laying out a precise and practical way for determining the island topology features, as required in various applications, through an analytical and exact flux surface label.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of crystallographical and geometrical changes of a ferrite head on magnetic signals during the sliding process with magnetic tape

This paper reviews changes in the crystalline structure and geometry of lapped Mn-Zn ferrite heads in sliding contact with magnetic tape and the effects of these changes on magnetic signals. A highly textured, polycrystalline structure was produced on the surface of a single-crystal Mn-Zn ferrite head when it was finished with an aluminum oxide lapping tape. Sliding this lapped surface against a magnetic tape produced a nearly amorphous structure. The sliding process led to a degradation in readback signal of 1 to 2 dB (short-wavelength recording). Furthermore, wear of the magnetic head caused geometrical changes in the head surface. The signal read back with the worn magnetic head was sensitive to operating parameters such as head displacement and tape tension. A change in operating parameters created head-to-tape spacings and, consequently, excessive gains or losses in the readback signal.

Miyoshi, K.↗

Ferromagnetic-superparamagnetic granulometry of lunar surface materials

A technique of magnetic granulometry is applied to previously reported data for the temperature dependence of isothermal remanent magnetization (IRM) in 13 lunar surface samples, including three soils. Observed increases in IRM with decreasing temperature are attributed to changes from superparamagnetic to single-domain types of behavior for fine metallic-iron particles. Based on this hypothesis, the temperature dependence of IRM in the examined samples is analyzed to obtain particle-size distributions over the range of mean diameters from 30 to 130 A. It is found that the distribution functions for the soils and a low-grade breccia vary as the inverse square of particle volume and that the distributions for recrystallized breccias and igneous rocks apparently peak about mean values.

Schwerer, F. C.↗

Moessbauer Characterization of Magnetite/Polyaniline Magnetic Nanocomposite

Aniline surface coated Fe{sub 3}O{sub 4} nanoparticles have been successfully synthesized by UV irradiation varying the time and the acid media (HCl, HNO{sub 3}, or H{sub 2}SO{sub 4}). The synthesized material represents a promising platform for application in nerve regeneration. XRD patterns are consistent with the crystalline structure of magnetite. Nevertheless, for UV irradiation times longer than 2 h, extra XRD lines reveal the presence of goethite. The mean crystallite size of uncoated particles is estimated to be 25.4 nm, meanwhile that size is reduced to 19.9 nm for the UV irradiated sample in HCl medium for 4 h. Moessbauer spectra of uncoated nanoparticles reveal the occurrence of thermal relaxation at room temperature, while the 77 K-Moessbauer spectrum suggests the occurrence of electron localization effects similar to that expected in bulk magnetite. The Mossbauer spectra of UV irradiated sample in HCl medium during 4 h, confirms the presence of the goethite phase. For this sample, the thermal relaxation is more evident, since the room temperature spectrum shows larger spectral area for the nonmagnetic component due to the smaller crystallite size. Meanwhile, the 77 K-Moessbauer spectrum suggests the absence of the electron localization effect above 77 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of etch pits found on a large-grain bulk niobium superconducting radio-frequency resonant cavity

The performance of superconducting radio-frequency (SRF) resonant cavities made of bulk niobium is limited by nonlinear localized effects. Surface analysis of regions of higher power dissipation is thus of intense interest. Such areas (referred to as “hotspots”) were identified in a large-grain single-cell cavity that had been buffered-chemical polished and dissected for examination by high resolution electron microscopy, electron backscattered diffraction microscopy (EBSD), and optical microscopy. Pits with clearly discernible crystal facets were observed in both “hotspot” and “coldspot” specimens. The pits were found in-grain, at bicrystal boundaries, and on tricrystal junctions. They are interpreted as etch pits induced by crystal defects (e.g. dislocations). All coldspots examined had a qualitatively lower density of etch pits or relatively smooth tricrystal boundary junctions. EBSD mapping revealed the crystal orientation surrounding the pits. Locations with high pit density are correlated with higher mean values of the local average misorientation angle distributions, indicating a higher geometrically necessary dislocation content. In addition, a survey of the samples by energy dispersive x-ray analysis did not show any significant contamination of the samples’ surface. In conclusion, the local magnetic field enhancement produced by the sharp-edge features observed on the samples is not sufficient to explain the observed degradation of the cavity quality factor, which starts at peak surface magnetic field as low as 20 mT.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A COUPLED 2 × 2D BABCOCK–LEIGHTON SOLAR DYNAMO MODEL. II. REFERENCE DYNAMO SOLUTIONS

In this paper we complete the presentation of a new hybrid 2 × 2D flux transport dynamo (FTD) model of the solar cycle based on the Babcock–Leighton mechanism of poloidal magnetic field regeneration via the surface decay of bipolar magnetic regions (BMRs). This hybrid model is constructed by allowing the surface flux transport (SFT) simulation described in Lemerle et al. to provide the poloidal source term to an axisymmetric FTD simulation defined in a meridional plane, which in turn generates the BMRs required by the SFT. A key aspect of this coupling is the definition of an emergence function describing the probability of BMR emergence as a function of the spatial distribution of the internal axisymmetric magnetic field. We use a genetic algorithm to calibrate this function, together with other model parameters, against observed cycle 21 emergence data. We present a reference dynamo solution reproducing many solar cycle characteristics, including good hemispheric coupling, phase relationship between the surface dipole and the BMR-generating internal field, and correlation between dipole strength at cycle maximum and peak amplitude of the next cycle. The saturation of the cycle amplitude takes place through the quenching of the BMR tilt as a function of the internal field. The observed statistical scatter about the mean BMR tilt, built into the model, acts as a source of stochasticity which dominates amplitude fluctuations. The model thus can produce Dalton-like epochs of strongly suppressed cycle amplitude lasting a few cycles and can even shut off entirely following an unfavorable sequence of emergence events.

79 ASTRONOMY AND ASTROPHYSICS↗

Plasma density accumulation on a conical surface for diffusion along a diverging magnetic field

Two-dimensional (2-D) density and potential measurements have been carried out for plasma diffusing through an aperture in a diverging magnetic field. The radial density profile near the source is peaked on the axis but gradually evolves into a hollow profile away from the source. We observe a slow increase of the peak density along a hollow conical surface and correlate with the 2-D potential measurement reported earlier. It is also shown that the formation of 2-D structures with similar features are observed whenever plasma is allowed to diffuse through a physical aperture in such diverging magnetic field configuration, with or without the presence of electric double layer, i.e., the phenomenon is generic in nature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Determination of the characteristic magnetic pre-sheath length at divertor surfaces using micro-engineered targets on DiMES at DIII-D

The magnetic pre-sheath (MPS) width, L MPS , is a critical parameter to define the sheath potential, which controls the ion trajectory of low-Z species (D, T, He, and C), as well as the prompt re-deposition of high-Z species. In this work, to determine L MPS , we fabricated micro-trenches (30×30×4 µm) via focused ion beam (FIB) milling on a silicon surface and exposed them to L-mode deuterium plasmas in DIII-D via the Divertor Material Evaluation System (DiMES) removable sample exposure probe. The areal distribution of impurity depositions, mainly consisting of carbon, was measured by energy-dispersive X-ray spectroscopy (EDS) to reveal the deuterium ion shadowing effect on the trench floors. The carbon deposition profiles showed that the erosion was maximized for the azimuthal direction of φ = -40° (referenced to the toroidal magnetic field direction) as well as the polar angle of θ = 80°. A Monte Carlo equation-of-motion model, based on a collisionless MPS, was used to calculate the azimuthal and polar deuterium ion angle distributions (IADs) for a range of L MPS = k × ρ i , where ρ i is the ion gyro radius and k = 0.5-4. Then, gross erosion profiles were calculated by a Monte Carlo micro-patterning and roughness (MPR) code for ion sputtering using as input the calculated azimuthal and polar IADs for each value of k . Good agreement with the experimental C deposition profiles was obtained for the case k = 2.5-3.5. This result is consistent with a previous kinetic modeling prediction of k ~ 3, as well as previous analytical investigations that predicted the L MPS to be several ion gyro radii. A validation of theoretical sheath models supports its applicability to ITER and pilot plant divertors to successfully predict plasma-materials interactions.

Erosion↗

Exploring the planets with spacecraft - Accomplishments to date

A summary of knowledge gained about Venus, Mars, Jupiter, and Mercury via spacecraft. Mariner and Venera probes returned data on Venus' size, atmospheric structure and composition, temperature profiles, and magnetic field. Knowledge of the clouds is still primitive. Mars and Mariner probes (especially Mariner 9) expanded knowledge of the Martian surface, atmospheric structure and dynamics, and magnetic field. Mars is now viewed as a very active planet, with the possibility of life not immediately ruled out. Pioneer 10 returned data on Jovian temperature profiles and magnetic field, Galilean satellite masses, and Io's atmosphere. Mariner 10 added to knowledge of Mercury's surface, magnetic field, atmosphere, and activity.

Rea, D. G.↗