Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Size and spatial homogeneity of SiGe quantum dots in amorphous silica matrix

In this paper, we present a study of structural properties of SiGe quantum dots formed in amorphous silica matrix by magnetron sputtering technique. We investigate deposition conditions leading to the formation of dense and uniformly sized quantum dots, distributed homogeneously in the matrix. X-ray and Raman spectroscopy were used to estimate the Si content. A detailed analysis based on grazing incidence small angle x-ray scattering revealed the influence of the deposition conditions on quantum dot sizes, size distributions, spatial arrangement, and concentration of quantum dots in the matrix, as well as the Si:Ge content.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Adjustable resonance frequency and linewidth by Zr doping in Co thin films

Co{sub 100-x}Zr{sub x} (40 nm) thin films with different Zr compositions were grown on silicon substrates by radio frequency magnetron sputtering. The coercivity decreased with an increase in the Zr composition. A uniaxial anisotropy existed in the Co{sub 100-x}Zr{sub x} films, and the anisotropy field of the films decreased from 55 to 40 Oe with the increase of Zr composition. The resonance frequency and linewidth were decreased with the increase of the Zr composition during the permeability measurements. For samples with x=0 and 9, the magnetic anisotropy effective field and saturated field were obtained by fitting the external magnetic field dependent resonance frequency with Landau-Lifschitz-Gilbert equation. Therefore, it is an effective way to get the adjustable anisotropy field and linewidth, which is desirable for obtaining the high resonance and high permeability ferromagnetic film materials for high frequency application.

36 MATERIALS SCIENCE↗

Orientation dependence of ferroelectric behavior of BiFeO{sub 3} thin films

Multiferroic BiFeO{sub 3} (BFO) thin films with (111), (100), (110) preferred, and random orientations were deposited by radio frequency magnetron sputtering on SrRuO{sub 3}-buffered SrTiO{sub 3}(111), SrTiO{sub 3}(100), SrTiO{sub 3}(110), and Pt(111)/Ti/SiO{sub 2}/Si(100) substrates, respectively. The orientation dependences of ferroelectric and fatigue behavior of the BFO thin films were investigated. As expected, the (111)-oriented BFO thin film exhibits the highest, giant ferroelectric polarization (2P{sub r}=196.9 muC/cm{sup 2}) at 1 kHz and room temperature using positive up negative down measurement, while the (100)-oriented BFO thin film possesses an almost fatigue-free behavior up to 5.25x10{sup 7} switching cycles when measured at 100 kHz and room temperature. The observed behavior confirms that the largest spontaneous polarization direction and the fatigue endurance are (111) and (100) for BFO thin films, respectively. Regardless of the film orientation, the charge carriers that are responsible for dielectric relaxation and conductivity are oxygen vacancies (V{sub O}) .

36 MATERIALS SCIENCE↗

On the dynamic roughening transition in nanocomposite film growth

Surface roughness and dynamic growth behavior of TiC/a-C nanocomposite films deposited by nonreactive pulsed-dc (p-dc) magnetron sputtering were studied using atomic force microscopy, cross-sectional scanning, and transmission electron microscopy. From detailed analyses of surface morphology and growth conditions, it is concluded that a transition in growth mechanisms occurs, i.e., a mechanism dominated by geometric shadowing at a p-dc frequency of 100 kHz evolving to a surface diffusion mechanism driven by impact-induced atomistic downhill flow process by Ar{sup +} ions at a p-dc frequency of 350 kHz. It is shown that rapid smoothening of initially rough surfaces with rms roughness from {approx}6 to <1 nm can be effectively achieved with p-dc sputtering at 350 kHz pulse frequency, leading to a transition from a strong columnar to a columnar-free microstructure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Epitaxial growth of (001)-oriented Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} thin films on a-plane sapphire with an MgO/ZnO bridge layer

High quality (001)-oriented Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} (BST) thin films have been grown on a-plane sapphire (1120) by rf magnetron sputtering using a double bridge layer consisting of (0001)-oriented ZnO (50 nm) and (001)-oriented MgO (10 nm) prepared by plasma-assisted molecular beam epitaxy. X-ray diffraction revealed the formation of three sets of in-plane BST domains, offset from one another by 30 deg., which is consistent with the in-plane symmetry of the MgO layer observed by in situ reflective high electron energy diffraction. The in-plane epitaxial relationship of BST, MgO, and ZnO has been determined to be BST [110]//MgO [110]//ZnO [1120] and BST [110]/MgO [110]//ZnO [1100]. Capacitance-voltage measurements performed on BST coplanar interdigitated capacitor structures revealed a high dielectric tunability of up to 84% at 1 MHz.

36 MATERIALS SCIENCE↗

Electric-field tuning of the metal-insulator transition in ultrathin films of LaNiO{sub 3}

Epitaxial ultrathin films of the metallic perovskite LaNiO{sub 3} were grown on (001) SrTiO{sub 3} substrates using off-axis rf magnetron sputtering. The film structure was characterized and their electrical properties investigated. Films thinner than 8 unit cells display a metal-insulator transition at a thickness dependent characteristic temperature. Hall measurements revealed p-type conduction, which was confirmed by electric field-effect experiments. Large changes in the transport properties and the metal-insulator transition temperature were observed for the thinnest LaNiO{sub 3} films as the carrier density was electrostatically tuned.

36 MATERIALS SCIENCE↗

Amorphous silicon as electron transport layer for colloidal semiconductor nanocrystals light emitting diode

We demonstrate the fabrication of light-emitting diodes (LEDs) made from all-inorganic colloidal semiconducting nanocrystals (NCs). The diode utilizes a sandwich structure formed by placing CdSe/CdS NCs between two layers of Si and Ag{sub x}O, which act as electron- and hole-transporting materials, respectively. The photoluminescence properties of NCs are rendered less dependent upon surface chemistry and chemical environment by growing a thick CdS shell. It also enhances stability of the NCs during the process of magnetron sputtering for silicon deposition. The resulting LED device exhibits a low turn-on voltage of 2.5 V and the maximum external quantum efficiency of nearly 0.08%.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modulating microstructure and magnetic properties of BaFe{sub 12}O{sub 19} thin films by using Pt and yttria stabilized zirconia underlayers

The c-axis oriented barium ferrite thin films were prepared by radio frequency magnetron sputtering on silicon substrates with a metal underlayer Pt (111) as well as an oxide underlayer yttria stabilized zirconia (YSZ). Microstructural studies (scanning electron microscopy, atomic force microscopy, and magnetic force microscopy) showed that the magnetic grains in BaM film have a strong relationship with the grains in the underlayer. The Pt underlayer is more effective in forming micrometer-sized and multidomain magnetic grains, which have high saturation magnetization but small coercivity and remanence of the BaM film. On the contrary, the YSZ underlayer is favorable to obtain nanometer-sized and monodomain magnetic grains, which lead to a slight decrease in saturation magnetization but dramatically increase coercivity and remanence of the BaM film. Hence, with careful selection of underlayer, it is feasible to obtain suitable magnetic grain size and domain structure of BaM films to satisfy special requirements.

36 MATERIALS SCIENCE↗

Magnetic properties of graded A1/L1{sub 0} films obtained by heat treatment of FePt/CoPt multilayers

Structurally gradient layered A1/L1{sub 0} films are obtained by heat treatment of magnetron sputter deposited FePt(20 nm)/CoPt(x nm) bilayers where x=0-120 nm. The magnetic properties can be tuned by adjustment of the layer thicknesses and taking advantage of the different heat-treatment temperatures required for the ordering of the L1{sub 0} phase between FePt and CoPt.

36 MATERIALS SCIENCE↗

Highly efficient blue organic light emitting device using indium-free transparent anode Ga:ZnO with scalability for large area coating

The availability of economically-produced and environmentally-stable transparent conductive oxide (TCO) coatings is critical for the development of a variety of electronic devices requiring transparent electrodes. Such devices include liquid crystal display pixels and organic light emitting diodes (OLEDs),[1, 2] solar cell applications,[3, 4] and electrically heated windows.[5, 6] The materials fulfilling these requirements are usually wide band gap inorganic transparent conductive oxides (TCOs). Tin-doped indium oxide, or ITO, has traditionally been used for electronic TCO applications because of its low resistivity, high work function and transparency. Due to the increasing cost and limited supply of indium and its tendency to migrate in to the device, there has been increasing research interest to substitute ITO with an indium-free material. A number of alternative metal oxides and doped oxides have been evaluated as TCO materials with varying degrees of success.[7, 8] Among these alternatives to ITO, gallium-doped zinc oxide (GZO) [2, 9] and aluminium-doped zinc oxide (AZO) [10, 11] have drawn particular attention. These materials have been demonstrated to have resistivities and transparencies approaching those of the best ITO, low toxicity, and much lower materials cost. Although AZO is attractive as a TCO electrode material, GZO features a greater resistance to oxidation as a result of gallium’s greater electronegativity compared to Submitted to 2 aluminum.[12, 13

14 SOLAR ENERGY↗

Compositional effects on the growth of Mg(M)O films

The influence of the composition on the crystallographic properties of deposited Mg(M)O (with M=Al, Cr, Ti, Y, and Zr) films is studied. For a flexible control of the composition, dual reactive magnetron sputtering was used as deposition technique. Two different approaches to predict the composition are discussed. The first is an experimental way based on the simple relationship between the deposition rate and the target-substrate distance. The second is a route using a Monte Carlo based particle trajectory code. Both methods require a minimal experimental input and enable the user to quickly predict the composition of complex thin films. Good control and flexibility allow us to study the compositional effects on the growth of Mg(M)O films. Pure MgO thin films were grown with a (111) preferential out-of-plane orientation. When adding M to MgO, two trends were noticed. The first trend is a change in the MgO lattice parameters compared to pure MgO. The second tendency is a decrease in the crystallinity of the MgO phase. The experimentally determined crystallographic properties are shown to be in correspondence with the predicted properties from molecular dynamics simulations.

36 MATERIALS SCIENCE↗

Magnetostrictive and structural properties of FeCoGa films

Fe{sub 81-x}Co{sub x}Ga{sub 19} (with x ranging from 0 to 19 at. % Co) films were made by the dc magnetron sputtering method. We have studied the structural (phases, texturing, and grain size D), magnetic (saturation magnetostriction {lambda}{sub S} and coercivity H{sub C}), mechanical (Young's modulus E{sub f} and hardness H{sub f}), and electrical (electrical resistivity {rho}) properties of these films. The main results are as follows: (i) all the films are (110) textured; (ii) the bct phase (with twinned grains) coexists with the bcc phase only in the case of x{<=}3 at. % Co; (iii) {lambda}{sub S} increases steadily from 42 to 86 ppm, as x increases from 0 to 19 at. % Co; and (iv) {rho} reaches the saturation limit, about 200 {mu}{Omega} cm, when 19{>=}x{>=}15 at. % Co. In conclusion, we report that the Fe{sub 62}Co{sub 19}Ga{sub 19} film has the optimal magnetic, mechanical, and electrical properties among all the FeCoGa films measured.

36 MATERIALS SCIENCE↗

Influence of multiple magnetic phases on the extrinsic damping of FeCo-SiO{sub 2} soft magnetic films

In order to investigate the high-frequency damping properties of the ferromagnetic film for the electromagnetic shielding applications, a series of (FeCo){sub 2x}/(Fe){sub x}/(SiO{sub 2}){sub 1-3x} nanogranular films with various volume fractions (x) were fabricated by alternate triple-target magnetron sputtering. The (FeCo){sub 0.50}/Fe{sub 0.25}/(SiO{sub 2}){sub 0.25} film shows excellent soft magnetic properties (4{pi}M{sub s{approx}}1.48 T, H{sub ce{approx}}4.3 Oe, {rho}{approx}4.3 {mu}{Omega} m). In both ferromagnetic resonance (FMR) and frequency-dependent permeability spectra measurements, two resonance peaks of the permeability for this film are obtained, which can be attributed to the complicated magnetic structure of FeCo and Fe phases in the film. This multiphase system makes an additional contribution to the extrinsic damping. As a result, the higher natural resonance frequency f for the film is up to 2.75 GHz with full width at half maximum of about 2.5 GHz for the imaginary part {mu}{sup ||}; meanwhile, the real part {mu}{sup /} is as high as 650 while f<1.3 GHz. These films could be novel candidates for the electromagnetic shielding applications.

36 MATERIALS SCIENCE↗

Study of metal/ZnO based thin film ultraviolet photodetectors: The effect of induced charges on the dynamics of photoconductivity relaxation

Ultraviolet photoconductivity relaxation in ZnO thin films deposited by rf magnetron sputtering are investigated. Effect of oxygen partial pressure in the reactive gas mixture and film thickness on the photoconductivity transients is studied. A different photodetector configuration comprising ZnO thin film with an ultrathin overlayer of metals like Cu, Al, Sn, Au, Cr, and Te was designed and tested. Photoresponse signal were found to be stronger (four to seven times) in these configurations than the pure ZnO thin films. Sn(30 nm)/ZnO sample exhibits highest responsivity of {approx}8.57 kV/W whereas Te(20 nm)/ZnO structure presents highest sensitivity of {approx}31.3x10{sup 3} compared to unloaded ZnO thin film. Enhancement in the photoresponse of ZnO thin films is attributed to the change in surface conductivity due to induced charge carriers at the interface because of the difference in work function and oxygen affinity values of metal overlayer with the underlying semiconducting layer. Charge carrier transfer from the metal layer to ZnO creates a surplus of electrons at the interface; a fraction of which are captured by the defect centers (traps) at the surface whereas the remaining one represents free carriers in the conduction band and are responsible for the enhanced photoconductivity.

36 MATERIALS SCIENCE↗

A Study on the Structural Change of Al--N Co-Doped ZnO Thin Films

The co-doped ZnO thin film were deposited by DC magnetron sputtering on silicon (111) followed by annealing treatment at 200 deg. C to 600 deg. C for 1 hour in nitrogen and oxygen gas mixture. Structural investigation was carried out by atomic force microscopy (AFM), scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) and X--ray diffraction (XRD). Film roughness (r.m.s) and grain shape were found to be correlated with the annealing temperatures. SEM result has shown that its surface characteristics are strongly influenced by annealing temperatures.

36 MATERIALS SCIENCE↗

The Electrical Properties of Co-Doped ZnO Thin Films

Codoped ZnO thin films were prepared on silicon (111) substrates by cosputtering of aluminium rods and zinc target using DC magnetron sputtering followed by heat treatment at 400 deg. C for 1 hour at different ratios of oxygen and nitrogen gas. Results indicate that gas ratios influenced the film conduction properties, which had the lowest resistivity of 7.985x10{sup -3} cm{sup -3} and highest carrier concentration of 6.89x10{sup 21} cm{sup -3}.

36 MATERIALS SCIENCE↗

Microstructural Characterisation of Giant Magnetoresistive Co/Cu Multilayers

Antiferromagnetically-coupled Co/Cu multilayers prepared by magnetron sputtering exhibit pronounced giant magnetoresistance (GMR) effect at room temperature. Using both diffraction and imaging techniques, we studied the in-plane and out-of-plane crystallographic and layering microstructural features of these multilayers. Dominant characteristic features associated with the multilayers, such as lateral and vertical columnar grain orientations as well as layer undulations and regularity, were identified. By deliberately introducing microstructural changes to the materials system using buffer layer and heat treatment, detailed microstructural analysis have provided an insight into the dependence of GMR on microstructures of the multilayers.

36 MATERIALS SCIENCE↗

ZnO Thin Film Ga s Sensor for CO

ZnO thin films were deposited onto corning glass substrates by rf magnetron sputtering system using ZnO targets. Films were deposited under rf power of 80 W at various deposition time. The distance between the target and substrate was held at 45 cm. A mixed Ar and O{sub 2} gas was introduced into the chamber at 4x10{sup -2} Torr. The structure of the deposited ZnO films was investigated by Scanning electron miscroscopy. The gas sensing properties were evaluated at various operation temperatures by measuring the changes of resistance of the sensor in air and in CO gas respectively using the gas sensing characterization system. The grain size was increased as the film thickness was increased during deposition. The sensor with 233 nm film thickness exhibited the highest sensitivity for CO gas.

36 MATERIALS SCIENCE↗