Search NASA⌕ Search

SEARCH · Search NASA

Results for “Methods in superconductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Entanglement Purification and Protection in a Superconducting Quantum Network

High-fidelity quantum entanglement is a key resource for quantum communication and distributed quantum computing, enabling quantum state teleportation, dense coding, and quantum encryption. Any sources of decoherence in the communication channel, however, degrade entanglement fidelity, thereby increasing the error rates of entangled state protocols. Entanglement purification provides a method to alleviate these nonidealities by distilling impure states into higher-fidelity entangled states. In this work, we demonstrate the entanglement purification of Bell pairs shared between two remote superconducting quantum nodes connected by a moderately lossy, 1-meter long superconducting communication cable. We use a purification process to correct the dominant amplitude damping errors caused by transmission through the cable, with fractional increases in fidelity as large as 25%, achieved for higher damping errors. The best final fidelity the purification achieves is 94.09 ± 0.98%. In addition, we use both dynamical decoupling and Rabi driving to protect the entangled states from local noise, increasing the effective qubit dephasing time by a factor of 4, from 3 to 12 μs. These methods demonstrate the potential for the generation and preservation of very high-fidelity entanglement in a superconducting quantum communication network.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure of polycrystalline Cd metal using {sup 241}Am radioisotope

Electronic structure study of the polycrystalline cadmium metal is reported. The experimental measurement is undertaken on a polycrystalline sheet sample using 59.54 keV radioisotope of {sup 241}Am. These results are compared with the ab initio calculations. The theoretical calculations are performed using linear combination of atomic orbitals (LCAO) method employing the density functional theories (DFT) and Hartree-Fock (HF) and augmented plane wave (APW) methods. The spherically averaged APW and LCAO based theoretical Compton profiles are in good agreement with the experimental measurement however the APW based theoretical calculations show best agreement.

36 MATERIALS SCIENCE↗

Surface-plasmon enhanced photodetection at communication band based on hot electrons

Surface plasmons can squeeze light into a deep-subwavelength space and generate abundant hot electrons in the nearby metallic regions, enabling a new paradigm of photoconversion by the way of hot electron collection. Unlike the visible spectral range concerned in previous literatures, we focus on the communication band and design the infrared hot-electron photodetectors with plasmonic metal-insulator-metal configuration by using full-wave finite-element method. Titanium dioxide-silver Schottky interface is employed to boost the low-energy infrared photodetection. The photodetection sensitivity is strongly improved by enhancing the plasmonic excitation from a rationally engineered metallic grating, which enables a strong unidirectional photocurrent. With a five-step electrical simulation, the optimized device exhibits an unbiased responsivity of ∼0.1 mA/W and an ultra-narrow response band (FWHM = 4.66 meV), which promises to be a candidate as the compact photodetector operating in communication band.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hydrogen storage in LiH: A first principle study

First principles calculations have been performed on the Lithium hydride (LiH) using the full potential linearized augmented plane wave (FP-LAPW) method within the framework of density functional theory. We have extended our calculations for LiH+2H and LiH+6H in NaCl structure. The structural stability of three compounds have been studied. It is found that LiH with 6 added Hydrogen atoms is most stable. The obtained results for LiH are in good agreement with reported experimental data. Electronic structures of three compounds are also studied. Out of three the energy band gap in LiH is ∼3.0 eV and LiH+2H and LiH+6H are metallic.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

VERY LOW FREQUENCY BREAKDOWN PROPERTIES OF ELECTRICAL INSULATION MATERIALS AT CRYOGENIC TEMPERATURES

For long cables or equipment with large capacitance it is not always possible to conduct high voltage withstand at tests at 60 Hz due to limitations in charging currents of the power supply. Very low frequency (typically at a frequency of 0.1 Hz) has been used for conventional cables as a way of getting around the charging current limitation. For superconducting grid applications the same issues apply. However there is very little data at cryogenic temperatures on how materials perform at low frequency compared to 60 Hz and whether higher voltages should be applied when performing a high voltage acceptability test. Various materials including G10 (fiberglass reinforced plastic or FRP), Cryoflex™ (a tape insulation used in some high temperature superconducting cables), kapton (commonly used polyimide), polycarbonate, and polyetherimide, and in liquid nitrogen alone have been tested using a step method for frequencies of 60 Hz, 0.1 Hz, and dc. The dwell time at each step was chosen so that the aging factor would be the same in both the 60 Hz and 0.1 Hz tests. The data indicated that, while there is a small frequency dependence for liquid nitrogen, there are significant differences for the solid materials studied. Breakdown data for these materials and for model cables will be shown and discussed.

cryogenic dielectric↗

Simulation Of Ion Implantation Into Nuclear Materials And Comparison With Experiment

A new many-body potential is proposed for pure molybdenum that consists of using ab initio and atomistic MD simulation methods verified against existing surface erosion experimental data. Mo is an important material for metallic U-Mo alloys for using them in low-enriched fuels. Several new Xe-Mo potentials were also parameterized by comparing the calculated sputtering yield of a Mo-surface bombarded with Xe ions with experimental data. Calculated results were also compared with defect distributions in CeO{sub 2} crystals obtained from experiments by 500 keV Xe implantation at the doses of 1x10{sup 17} ions/cm{sup 2} at several temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab-initio study of thermoelectric properties of Mg{sub 2}Ge

In this paper we investigate the thermoelectric properties of Mg{sub 2}Ge material using first principles pseudo potential method based on density functional theory and Boltzmann transport equations. The calculations show n-type conduction, indicating that the electrical conduction is due to electron. The electrical conductivity decrease with temperature; the negative value of Seebeck Coefficient also shows that the conduction is due to electron. In this paper we have calculated Seebeck coefficient, electrical conductivity and thermal conductivity. The thermoelectric properties of system have been calculated in this temperature range 100 K-1200 K. The value of Figure of Merit (ZT) of this material is also increasing with temperature and maximum value is 4.58×10{sup −5}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication, characterization and applications of iron selenide

This review article presents fabrication of FeSe by solid state reactions, solution chemistry routes, chemical vapor deposition, spray pyrolysis and chemical vapor transport. Different properties and applications such as crystal structure and phase transition, band structure, spectroscopy, superconductivity, photocatalytic activity, electrochemical sensing, and fuel cell activity of FeSe have been discussed. - Graphical abstract: Iron selenide can be synthesized by solid state reactions, chemical vapor deposition, solution chemistry routes, chemical vapor transport and spray pyrolysis. - Highlights: • Different fabrication methods of iron selenide (FeSe) have been reviewed. • Crystal structure, band structure and spectroscopy of FeSe have been discussed. • Superconducting, catalytic and fuel cell application of FeSe have been presented.

36 MATERIALS SCIENCE↗

Electronic structure and optical properties of Ag{sub 3}PO{sub 4} photocatalyst calculated by hybrid density functional method

The electronic structure and optical properties of Ag{sub 3}PO{sub 4} were studied by hybrid density functional theory. The results indicated that the band gap is 2.43 eV, which agrees well with the experimental value of 2.45 eV. The conduction bands of Ag{sub 3}PO{sub 4} are mainly attributable to Ag 5s and 5p states, while the valence bands are dominated by O 2p and Ag 4d states. The highest valence band edge potential was 2.67 V (vs. normal hydrogen electrode), which has enough driving force for photocatalytic water oxidation and pollutants degradation. The optical absorption spectrum showed that Ag{sub 3}PO{sub 4} is a visible light response photocatalyst.

36 MATERIALS SCIENCE↗

Growth and characterization of HgBa 2 CaCu 2 O 6+δ and HgBa 2 Ca 2 Cu 3 O 8+δ crystals

We report the successful growth of sizable crystals of the cuprate superconductors HgBa 2 CaCu 2 O 6+δ and HgBa 2 Ca 2 Cu 3 O 8+δ . These compounds are well known for their high optimal superconducting critical temperatures of T c = 128 K and 134 K at ambient pressure, respectively, and for their challenging synthesis. Using a conventional quartz-tube encapsulation method and a two-layer encapsulation method that utilizes custom-built high-pressure furnaces, we are able to grow single crystals with linear dimensions up to several millimeters parallel to the CuO 2 planes. Extended postgrowth annealing is shown to lead to sharp superconducting transitions, indicative of high macroscopic homogeneity. X-ray diffraction and polarized Raman spectroscopy are identified as viable nondestructive methods to help separate the two compounds from synthesis products, as the latter often contain intergrowths of the former. Furthermore, our work helps to remove obstacles toward the study of these model cuprate systems with experimental probes that require sizable high-quality crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modelling of monovacancy diffusion in W over wide temperature range

The diffusion of monovacancies in tungsten is studied computationally over a wide temperature range from 1300 K until the melting point of the material. Our modelling is based on Molecular Dynamics technique and Density Functional Theory. The monovacancy migration barriers are calculated using nudged elastic band method for nearest and next-nearest neighbour monovacancy jumps. The diffusion pre-exponential factor for monovacancy diffusion is found to be two to three orders of magnitude higher than commonly used in computational studies, resulting in attempt frequency of the order 10{sup 15} Hz. Multiple nearest neighbour jumps of monovacancy are found to play an important role in the contribution to the total diffusion coefficient, especially at temperatures above 2/3 of T{sub m}, resulting in an upward curvature of the Arrhenius diagram. The probabilities for different nearest neighbour jumps for monovacancy in W are calculated at different temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Itinerant ferromagnetism in a Fermi gas with contact interaction: Magnetic properties in a dilute Hubbard model

Ground-state properties of the repulsive Hubbard model on a cubic lattice are investigated by means of the auxiliary-field quantum Monte Carlo method. We focus on low-density systems with varying on-site interaction U/t, as a model relevant to recent experiments on itinerant ferromagnetism in a dilute Fermi gas with contact interaction. Twist-average boundary conditions are used to eliminate open-shell effects and large lattice sizes are studied to reduce finite-size effects. The sign problem is controlled by a generalized constrained path approximation. We find no ferromagnetic phase transition in this model. The ground-state correlations are consistent with those of a paramagnetic Fermi liquid.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Design and Validation of a Cryogenic Dilatometer

This project focuses on the design and development of a cryogenic dilatometer capable of measuring the thermal expansion of materials at extremely low temperatures. Understanding how materials change dimension with temperature is critical for applications involving cryogenic environments, particularly laminated systems housing superconducting magnets, where small dimensional changes can significantly affect performance and reliability. To address this, a dilatometer system was designed to operate within a liquid nitrogen environment while accurately measuring displacements caused by thermal contraction. The purpose of this device is to determine the coefficient of thermal expansion (CTE) of a material. The design process involved defining functional requirements, developing mechanical and thermal concepts for the measurement apparatus, selecting appropriate materials compatible with cryogenic temperatures, and integrating sensors capable of detecting small dimensional changes. The resulting system aims to provide a practical and repeatable method for evaluating material thermal expansion at cryogenic temperatures, supporting research into composite use in superconducting applications that require accurate characterization of material behavior in low-temperature environments.

Schmitt, Nicholas [Northern Illinois U.]↗

Structural and superconducting properties of Nb 3 Sn films grown by multilayer sequential magnetron sputtering

Nb 3 Sn thin films are fabricated by sequential sputtering followed by annealing at 850–1200°C in vacuum. The effects of the annealing temperature and time on the formation of Nb 3 Sn were examined. The film crystal structure, morphology, surface topography and composition were distinguished by X-ray diffraction, field-emission scanning electron microscopy, atomic force microscopy, and energy dispersive X-ray spectroscopy analysis. The superconducting properties of the films were characterized by measuring the surface resistivity by the four-point probe method. The highest critical temperature T c = 17.86 K was observed for the Nb 3 Sn films annealed at 950°C for 3 h. When the films were annealed above 1000°C for 3 h, Sn evaporation resulted in a Nb-rich film, degrading the superconducting performance. Annealing at 1200°C for 3 h resulted in evaporation of Sn leaving less than 1% Sn on the surface, as detected by energy dispersive spectroscopy, and for that film a T c of 7.9 K was observed.

36 MATERIALS SCIENCE↗

Stopping Power Of He, C And O In InN

Group III nitrides such as InN, GaN, and their alloys are increasingly important in a host of optoelectronic and electronic devices. The presence of unintentional impurities is one of the factors that can strongly affect the electronic properties of these materials, and thus ion beam analysis techniques can play a fundamental role, in particular heavy ion elastic recoil detection analysis tracing and quantifying these contaminations. However, stopping powers in InN and GaN have not yet been measured, and data analysis relies on using the Bragg rule, which is often inaccurate. We have used a bulk method, previously developed by us and applied successfully to other systems, to determine experimentally the stopping power of several ions in InN. The results of our measurements and bulk method analysis are presented.

36 MATERIALS SCIENCE↗

Momentum distribution and ordering in mixtures of ultracold light- and heavy-fermion atoms

The momentum distribution is one of the most important quantities which provides information about interactions in many-body systems. At the same time it is a quantity that can easily be accessed in experiments on ultracold atoms. In this paper, we consider mixtures of light- and heavy-fermionic atoms in an optical lattice described effectively by the Falicov-Kimball model. Using a Monte Carlo method, we study how different ordered density-wave phases can be detected by measurement of the momentum distribution of the light atoms. We also demonstrate that ordered phases can be seen in Bragg scattering experiments. Our results indicate that the main factor that determines the momentum distribution of the light atoms is the trap confinement. On the other hand, the pattern formed by the heavy atoms seen in the Bragg scattering experiments is very sensitive to the temperature and possibly can be used in low-temperature thermometry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tensor train continuous time solver for quantum impurity models

The simulation of strongly correlated quantum impurity models is a significant challenge in modern condensed matter physics that has multiple important applications. Thus far, the most successful methods for approaching this challenge involve Monte Carlo techniques that accurately and reliably sample perturbative expansions to any order. However, the cost of obtaining high precision through these methods is high. Recently, tensor train decomposition techniques have been developed as an alternative to Monte Carlo integration. In this study, we apply these techniques to the single-impurity Anderson model at equilibrium by calculating the systematic expansion in power of the hybridization of the impurity with the bath. Furthermore, we demonstrate the performance of the method in a paradigmatic application, examining the first-order phase transition on the infinite-dimensional Bethe lattice, which can be mapped to an impurity model through dynamical mean field theory. Our results indicate that using tensor train decomposition schemes allows the calculation of finite-temperature Green's functions and thermodynamic observables with unprecedented accuracy. The methodology holds promise for future applications to frustrated multiorbital systems, using a combination of partially summed series with other techniques pioneered in diagrammatic and continuous time quantum Monte Carlo.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin echo small-angle neutron scattering using superconducting magnetic Wollaston prisms

Here, we show the implementation of superconducting magnetic Wollaston prisms for spin echo small-angle neutron scattering. Two calibration methods for the spin echo length are presented: one utilizing spin echo modulated small-angle neutron scattering and the other based on the neutron refraction by quartz wedge crystals. Our experimental results with polystyrene nano-particle colloids showcase the system’s efficacy in measuring both dilute and concentrated colloidal systems. Additionally, investigations into the pore diameter and pitch of a nano-porous alumina membrane demonstrate its capability in analyzing nano-porous materials. Furthermore, we discuss potential optimizations to further extend the accessible spin echo length.

47 OTHER INSTRUMENTATION↗