Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model Form”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Constitutive model development of aluminum alloy 1100 for elevated temperature forming process

Commercially pure aluminum alloy, AA1100, presents good electrical and thermal conductivity, high formability, and low cost. Those favorable characteristics have the potential to enable bipolar plates with improved economics and enhanced performance compared to current stainless steel bipolar plates for proton exchange membrane fuel cells. An accurate constitutive model is essential to develop and optimize processing parameters and effectively control the forming process. Here, the objective of this work is to develop a constitutive model of AA1100 that is able to simulate stress-strain relation, formed geometry, and predict the onset of fracture strain to avoid forming failure. Initially, a set of tensile tests at temperature between 300 and 500°C and strain rate between 0.005 and 1.0/s were conducted to examine the deformation behavior. Then, a set of damage-based unified visco-plastic constitutive equations is proposed and calibrated based on the results of stress-strain data. A genetic algorithm optimization method is applied to search for best fitting material constants in constitutive equations. The proposed model shows good predictability of both the stress-strain relation and fracture strain at low strain rate and high temperature conditions. The accuracy of proposed model is also evaluated statistically. A comparison of the proposed model with three popular models (Arrhenius-type mode, Johnson-Cook model and Zerilli-Armstrong model) was made. The proposed model shows the best experimental agreement with correlation coefficient of 0.96 in contrast to 0.25, 0.38 and 0.75 for the popular models, respectively. The proposed model can help to optimize the elevated temperature forming process and guide die design to enable optimal geometric features in the formed components.

08 HYDROGEN↗

SU-E-J-30: Benchmark Image-Based TCP Calculation for Evaluation of PTV Margins for Lung SBRT Patients

Purpose: Tumor control probability (TCP) calculated with accumulated radiation doses may help design appropriate treatment margins. Image registration errors, however, may compromise the calculated TCP. The purpose of this study is to develop benchmark CT images to quantify registration-induced errors in the accumulated doses and their corresponding TCP. Methods: 4DCT images were registered from end-inhale (EI) to end-exhale (EE) using a “demons” algorithm. The demons DVFs were corrected by an FEM model to get realistic deformation fields. The FEM DVFs were used to warp the EI images to create the FEM-simulated images. The two images combined with the FEM DVF formed a benchmark model. Maximum intensity projection (MIP) images, created from the EI and simulated images, were used to develop IMRT plans. Two plans with 3 and 5 mm margins were developed for each patient. With these plans, radiation doses were recalculated on the simulated images and warped back to the EI images using the FEM DVFs to get the accumulated doses. The Elastix software was used to register the FEM-simulated images to the EI images. TCPs calculated with the Elastix-accumulated doses were compared with those generated by the FEM to get the TCP error of the Elastix registrations. Results: For six lung patients, the mean Elastix registration error ranged from 0.93 to 1.98 mm. Their relative dose errors in PTV were between 0.28% and 6.8% for 3mm margin plans, and between 0.29% and 6.3% for 5mm-margin plans. As the PTV margin reduced from 5 to 3 mm, the mean TCP error of the Elastix-reconstructed doses increased from 2.0% to 2.9%, and the mean NTCP errors decreased from 1.2% to 1.1%. Conclusion: Patient-specific benchmark images can be used to evaluate the impact of registration errors on the computed TCPs, and may help select appropriate PTV margins for lung SBRT patients.

60 APPLIED LIFE SCIENCES↗

Limb-darkening functions for the earth-atmosphere system over desert scenes

Alongtrack data collected with the Earth Radiation Budget Experiment (ERBE) scanner instrument were used to study an observed limb-darkening phenomenon. A numerical model developed for the longwave exitance as a function of the SZA has agreed well with ERBE data, indicating that the atmosphere is in adiabatic, rather than radiative, equilibrium. A corrected form of the model has been defined for SZA over 60 deg. The model was used to parameterize diurnal data for the Sahara-Saudi and Australian deserts.

Brooks, D. R.↗

Nonflow correlations in a cluster model

We derive analytical forms for nonflow contributions from cluster correlation to the measurement of two-particle elliptic flow (v{sub 2}(2)). We estimate nonflow contribution from rho->pi{sup +}pi{sup -} decays and find it is negative but not a major contributor to the nonflow effect in v{sub 2}(2). We also estimate nonflow contribution from the recent STAR measurement of two-particle angular correlations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evaluation of Blended Wing-Body Combinations with Curved Plan Forms at Mach Numbers Up to 3.50

This investigation is a continuation of the experimental and theoretical evaluation of the effects of wing plan-form variations on the aerodynamic performance characteristics of blended wing-body combinations. The present report compares previously tested straight-edged delta and arrow models which have leading-edge sweeps of 59.04 and 70-82 deg., respectively, with related models which have plan forms with curved leading and trailing edges designed to result in the same average sweeps in each case. All the models were symmetrical, without camber, and were generally similar having the same span, length, and aspect ratios. The wing sections had an average value of maximum thickness ratio of about 4 percent of the local wing chords in a streamwise direction. The wing sections were computed by varying their shapes along with the body radii (blending process) to match the selected area distribution and the given plan form. The models were tested with transition fixed at Reynolds numbers of roughly 4,000,000 to 9,000,000, based on the mean aerodynamic chord of the wing. The characteristic effect of the wing curvature of the delta and arrow models was an increase at subsonic and transonic speeds in the lift-curve slopes which was partially reflected in increased maximum lift-drag ratios. Curved edges were not evaluated on a diamond plan form because a preliminary investigation indicated that the curvature considered would increase the supersonic zero-lift wave drag. However, after the test program was completed, a suitable modification for the diamond plan form was discovered. The analysis presented in the appendix indicates that large reductions in the zero-lift wave drag would be obtained at supersonic Mach numbers if the leading- and trailing-edge sweeps are made to differ by indenting the trailing edge and extending the root of the leading edge.

Holdaway, George H.↗

Performance evaluation of tracking based on a low pass filter model

The performance of a human in a closed loop tracking task can be determined by using a simple low pass filter model with a least squares identification algorithm. The crossover model and the extended crossover model can be shown to be special cases of the low pass filter model presented here. Performance in tracking can be easily determined by mean square tracking error which can be written in terms of the parameters of the low pass filter model. A closed form expression for the effective time delay is also obtained. Experimental data from a roll axis tracking simulation is presented and simple prediction rules are determined. A comparison is made between this model and the crossover model with respect to their differences and similarities.

Repperger, D. W.↗

Dissemination and fractionation of projectile materials in the impact melts from Wabar Crater, Saudi Arabia

Results are presented from the analyses of small ballistically dispersed melt samples (occurring in the form of aerodynamically shaped spheres, dumbbells, and teardrops) from the Wabar Crater (Saudi Arabia) and of melts from the Wabar and Nejed meteorites. On the basis of the data obtained and of models for crater forming processes it is concluded that the ballistically-dispersed glasses were formed from material at shallow levels in the target zone where temperatures were higher and where intimate physical contact with the disrupting impactor was achieved. Siderophile element fractionation was completed early, while the impactor was undergoing decompression and prior to mixing with the target glasses.

Mittlefehldt, David W.↗

Principles of Bayesian Ensemble Creation: Theoretical and Empirical Observations

Bayesian methods are theoretically optimal given their underlying assumptions. Bayesian model averaging (BMA) is generally considered the standard model for creating ensembles of learners using Bayesian methods, but this technique is often out-performed by more ad hoc methods in empirical studies. It has been proposed that Bayesian model averaging struggles in practice because it accounts for uncertainty about which model is the data-generating model but still operates under the assumption that only one of them is. Thus, BMA is unable to enrich the hypothesis space as effectively as other ensemble creation methods, serving as a form of optimal model selection, not optimal model combination. This work provides empirical verification for this hypothesis using both synthetic and real-world data. We propose several different approaches for Bayesian model combination, and demonstrate that they overcome this problem with BMA. We empirically show that even the most simplistic of Bayesian model combination strategies can compete with the traditional ad hoc techniques of bagging, boosting and stacking, as well as significantly outperforming BMA over a wide variety of cases. We also explore the implications of this observation as it relates to the effectiveness of ensemble learning.

97 MATHEMATICS AND COMPUTING↗

Neutrino electromagnetic properties

The main goal of the paper is to give a short review on neutrino electromagnetic properties. In the introductory part of the paper a summary on what we really know about neutrinos is given: we discuss the basics of neutrino mass and mixing as well as the phenomenology of neutrino oscillations. This is important for the following discussion on neutrino electromagnetic properties that starts with a derivation of the neutrino electromagnetic vertex function in the most general form, that follows from the requirement of Lorentz invariance, for both the Dirac and Majorana cases. Then, the problem of the neutrino form factor definition and calculation within gauge models is considered. In particular, we discuss the neutrino electric charge form factor and charge radius, dipole magnetic and electric and anapole form factors. Available experimental constraints on neutrino electromagnetic properties are also discussed, and the recently obtained experimental limits on neutrino magnetic moments are reviewed. The most important neutrino electromagnetic processes involving a direct neutrino coupling with photons (such as neutrino radiative decay, neutrino Cherenkov radiation, spin light of neutrino and plasmon decay into neutrino-antineutrino pair in media) and neutrino resonant spin-flavor precession in a magnetic field are discussed at the end of the paper.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Predictive modelling of hydration and mechanical performance of low Ca composite cements: Possibilities and limitations from industrial perspective

We quantified hydration and performance development of composites cements containing metakaolin in the rage of 0–40% and investigated applicability of thermodynamic and micromechanical models to predict the evolution of hydrates assemblage and of performance, respectively. The reaction of metakaolin results in a formation of significant amounts of C-S-H phase for lower metakaolin content and of strätlingite for higher contents. This leads to very dense matrix with finer porosity allowing co-existence of thermodynamically incompatible phases, namely portlandite and strätlingite. Hence, thermodynamic modelling cannot be applied to correctly predict the phase assemblage for the systems with high metakaolin content. By introducing constraints into the thermodynamic model in a form of minimum phase content, the XRD-amorphous phases can be quantified. However, such constraints are only valid for the cases studied and limit the general applicability and predictive power of the model. Elastic properties and strength of mortars are influenced by the metakaolin additions in an opposite trend. It indicates that they are sensitive to different microstructural features/mechanisms. Continuum micromechanic-based model is capable to accurately predict the performance evolution based on the volume of hydrates predicted by the thermodynamic modelling. An additional step required for the accurate prediction - porosity is partitioned based on its saturation at 95% RH – is introduced and substantiated.

36 MATERIALS SCIENCE↗

A NEW CALCULATION OF THE IONIZING BACKGROUND SPECTRUM AND THE EFFECTS OF He II REIONIZATION

The ionizing background determines the ionization balance and the thermodynamics of the cosmic gas. It is therefore a fundamental ingredient to theoretical and empirical studies of both the intergalactic medium (IGM) and galaxy formation. We present here a new calculation of its spectrum that satisfies the empirical constraints we recently obtained by combining state-of-the-art luminosity functions and intergalactic opacity measurements. In our preferred model, star-forming galaxies and quasars each contribute substantially to the H I ionizing field at z < 3, with galaxies rapidly overtaking quasars at higher redshifts as quasars become rarer. In addition to our fiducial model, we explore the physical dependences of the calculated background and clarify how recombination emission contributes to the ionization rates. We find that recombinations do not simply boost the ionization rates by the number of re-emitted ionizing photons as many of these rapidly redshift below the ionization edges and have a distribution of energies. A simple analytic model that captures the main effects seen in our numerical radiative transfer calculations is given. Finally, we discuss the effects of He II reionization by quasars on both the spectrum of the ionizing background and on the thermal history of the IGM. In regions that have yet to be reionized, the spectrum is expected to be almost completely suppressed immediately above 54.4 eV, while a background of higher energy ({approx}>0.5 keV) photons permeates the entire universe owing to the frequency dependence of the photoionization cross section. We provide an analytical model of the heat input during He II reionization and its effects on the temperature-density relation.

79 ASTRONOMY AND ASTROPHYSICS↗

Spectral models for early time SN 2011fe observations

We use observed UV through near-IR spectra to examine whether SN 2011fe can be understood in the framework of Branch-normal Type Ia supernovae (SNe Ia) and to examine its individual peculiarities. As a benchmark, we use a delayed-detonationmodel with a progenitormetallicity of Z ⊙ /20. We study the sensitivity of features to variations in progenitor metallicity, the outer density profile, and the distribution of radioactive nickel. The effect of metallicity variations in the progenitor have a relatively small effect on the synthetic spectra. We also find that the abundance stratification of SN 2011fe resembles closely that of a delayed-detonation model with a transition density that has been fit to other Branch-normal SNe Ia. At early times, the model photosphere is formed in material with velocities that are too high, indicating that the photosphere recedes too slowly or that SN 2011fe has a lower specific energy in the outer ≈0.1 M ⊙ than does the model. We discuss several explanations for the discrepancies. Lastly, we examine variations in both the spectral energy distribution and in the colours due to variations in the progenitor metallicity, which suggests that colours are only weak indicators for the progenitor metallicity, in the particular explosion model that we have studied. Here we do find that the flux in the U band is significantly higher at maximum light in the solar metallicity model than in the lower metallicity model and the lower metallicity model much better matches the observed spectrum.

79 ASTRONOMY AND ASTROPHYSICS↗

A note on the loop thermosyphon with mixed boundary conditions

This paper presents a one-dimensional model for flow in a toroidal fluid loop in which the wall heat transfer coefficient is constant over one half of the loop, and zero over the other. A mathematically low-dimensional form of the model gives reasonably accurate predictions of the steady state mass flow, stability, and the nature of nonsteady motions. Numerical computations with a high-dimensional model illustrate the effects of mixed boundaries and axial heat conduction on the chaotic solutions. Comparisons are made with previous low-dimensional models that are exact only for a spatially uniform heat transfer coefficient.

Hart, J. E.↗

Specific Hardening Function Definition and Characterization of a Multimechanism Generalized Potential-based Viscoelastoplasticity Model

Given the previous complete-potential structure framework together with the notion of strain- and stress-partitioning in terms of separate contributions of several submechanisms (viscoelastic and viscoplastic) to the thermodynamic functions (stored energy and dissipation) a detailed viscoelastoplastic multimechanism characterization of a specific hardening functional form of the model is presented and discussed. TIMETAL 21S is the material of choice as a comprehensive test matrix, including creep, relaxation, constant strain-rate tension tests, etc. are available at various temperatures. Discussion of these correlations tests, together with comparisons to several other experimental results, are given to assess the performance and predictive capabilities of the present model particularly with regard to the notion of hardening saturation as well as the interaction of multiplicity of dissipative (reversible/irreversible) mechanisms.

Arnold, S. M.↗

Two distinct crystallization processes in supercooled liquid

Using molecular dynamics simulations we show that two distinct crystallization processes, depending on the temperature at which crystallization occurs, appear in a supercooled liquid. As a model for glass-forming materials, an Al{sub 2}O{sub 3} model system, in which both the glass transition and crystallization from the supercooled liquid can be well reproduced, is employed. Simulations in the framework of an isothermal-isobaric ensemble indicate that the calculated time-temperature-transformation curve for the crystallization to γ(defect spinel)-Al{sub 2}O{sub 3} exhibited a typical nose shape, as experimentally observed in various glass materials. During annealing above the nose temperature, the structure of the supercooled liquid does not change before the crystallization, because of the high atomic mobility (material transport). Thus, the crystallization is governed by the abrupt crystal nucleation, which results in the formation of a stable crystal structure. In contrast, during annealing below the nose temperature, the structure of the supercooled liquid gradually changes before the crystallization, and the formed crystal structure is less stable than that formed above the nose temperature, because of the restricted material transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Langevin Dynamics with Spatial Correlations as a Model for Electron-Phonon Coupling

Stochastic Langevin dynamics has been traditionally used as a tool to describe nonequilibrium processes. When utilized in systems with collective modes, traditional Langevin dynamics relaxes all modes indiscriminately, regardless of their wavelength. In this paper, we propose a generalization of Langevin dynamics that can capture a differential coupling between collective modes and the bath, by introducing spatial correlations in the random forces. This allows modeling the electronic subsystem in a metal as a generalized Langevin bath endowed with a concept of locality, greatly improving the capabilities of the two-temperature model. The specific form proposed here for the spatial correlations produces a physical wave-vector and polarization dependency of the relaxation produced by the electron-phonon coupling in a solid. We show that the resulting model can be used for describing the path to equilibration of ions and electrons and also as a thermostat to sample the equilibrium canonical ensemble. By extension, the family of models presented here can be applied in general to any dense system, solids, alloys, and dense plasmas. Finally, as an example, we apply the model to study the nonequilibrium dynamics of an electron-ion two-temperature Ni crystal.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

CUDO: closed-form universal dwell-time optimization for computer-controlled optical surfacing

Precision optical figuring demands fast and accurate dwell time optimization to reach nanometer- and sub-nanometer-level accuracy in next-generation optical systems. We introduce CUDO (closed-form universal dwell-time optimization), the first, to the best of our knowledge, unified closed-form analytical framework that supports both function-form and matrix-form dwell time models in computer-controlled optical surfacing (CCOS). In contrast to traditional methods, which rely on iterative optimization and hyperparameter tuning, our framework derives direct analytical solutions with no adjustable parameters. This approach unifies the solution principles of existing methods within a single mathematical model, delivering three key advantages: (1) accuracy on par with, or superior to, iterative solvers, (2) substantial reduction in computation time, and (3) numerical robustness. Comparative studies with prior art confirm that closed-form solutions achieve equivalent residual error while removing runtime bottlenecks. By simplifying the implementation and enabling real-time, scalable deployment, CUDO establishes a practical foundation for future deterministic fabrication of large-aperture and high-performance optics.

36 MATERIALS SCIENCE↗

Turbulence simulation mechanization for Space Shuttle Orbiter dynamics and control studies

The current version of the NASA turbulent simulation model in the form of a digital computer program, TBMOD, is described. The logic of the program is discussed and all inputs and outputs are defined. An alternate method of shear simulation suitable for incorporation into the model is presented. The simulation is based on a von Karman spectrum and the assumption of isotropy. The resulting spectral density functions for the shear model are included.

Tatom, F. B.↗