Search NASA⌕ Search

SEARCH · Search NASA

Results for “Modeled”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Chelation Modeling: The Use of Ad Hoc Models and Approaches to Overcome a Dose Assessment Challenge

Here, chelating agents are administered to treat significant intakes of radioactive elements such as plutonium, americium, and curium. These drugs may be used as a medical countermeasure after radiological accidents and terrorist acts. The administration of a chelating agent, such as Ca-DTPA or Zn-DTPA, affects the actinide's normal biokinetics. It enhances the actinide's rate of excretion, posing a dose assessment challenge. Thus, the standard biokinetic models cannot be directly applied to the chelation-affected bioassay data in order to assess the radiation dose. The present study reviews the scientific literature, from the early 1970s until the present, on the different studies that focused on developing new chelation models and/or modeling of bioassay data affected by chelation treatment. Although scientific progress has been achieved, there is currently no consensus chelation model available, even after almost 50 y of research. This review acknowledges the efforts made by different research groups, highlighting the different methodology used in some of these studies. Finally, this study puts into perspective where we were, where we are, and where we are heading in regards to chelation modeling.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2020

Comparison of Load Models for Estimating Electrical Efficiency in DC Microgrids: Preprint

This paper compares several electrical load models for estimating the efficiency of DC vs. AC distribution in microgrids. Candidate models include energy balance, harmonic power flow, and time-domain modeling. Model results are compared with numerical studies and validated with experimental measurements. Based on quantitative and qualitative considerations, the most appropriate load modeling approach for larger-scale DC distribution efficiency studies is proposed.

DC distribution↗
DOE OSTI2016

Modeling of Protection in Dynamic Simulation Using Generic Relay Models and Settings

This paper shows how generic protection relay models available in planning tools can be augmented with settings that are based on NERC standards or best engineering practice. Selected generic relay models in Siemens PSS®E have been used in dynamic simulations in the proposed approach. Undervoltage, overvoltage, underfrequency, and overfrequency relays have been modeled for each generating unit. Distance-relay protection was modeled for transmission system protection. Two types of load-shedding schemes were modeled: underfrequency (frequency-responsive non-firm load shedding) and underfrequency and undervoltage firm load shedding. Several case studies are given to show the impact of protection devices on dynamic simulations. This is useful for simulating cascading outages.

cascading failures↗
DOE OSTI2021

Theoretical Control-Centric Modeling for Precision Model-Based Sliding Mode Control of a Hydraulic Artificial Muscle Actuator

Artificial muscles (AMs) typically rely on pneumatic sources of fluid power. The use of hydraulics can increase the power and force to weight and volume ratios of AM actuators. This paper develops a control-centric third-order single-input single-output (SISO) lumped-parameter dynamic model and sliding mode position controller based on Filippov's principle of equivalent dynamics for a braided hydraulic artificial muscle (HAM) actuator. The model predicts the nonlinear behavior of the HAM free contraction and captures the fluid and actuator nonlinear dynamic interactions in addition to the braid deformation. Model simulations are compared to experimental results for quasi-static pressurization, isometric pressurization, and open-loop square wave commands at 0.25, 0.5, and 1 Hz. Experiments of sine wave tracking at 0.25, 0.5, and 1 Hz and continuous square wave tracking at 0.067 Hz are conducted using a sliding mode controller (SMC) derived from the model. The SMC achieves a steady-state error of 6 μm at multiple setpoints within the actuator's 17 mm stroke. Compared to a proportional-integral-derivative (PID) controller, the SMC root-mean-square (RMS) error, mean error, and absolute maximum error are reduced on average by 53%, 61%, and 44%, respectively, demonstrating the benefit of model-based approaches for controlling HAMs.

42 ENGINEERING↗
DOE OSTI2016

Improving representation of drought stress and fire emissions in climate carbon models: measurements and modeling with a focus on the western USA

The objective of the proposed research was to collect data and develop models to improve our understanding of the role of drought and fire impacts on the terrestrial carbon cycle in the western US, including impacts associated with urban systems as they impacted regional carbon cycles. Using data we collected and a synthesis of other measurements, we developed new ways (a) to evaluate the representation of drought stress and fire emissions in the Community Land Model, (b) to model net ecosystem exchange combining ground level atmospheric observations with boundary layer theory, (c) to model upstream impacts of fire and fossil fuel emissions on atmospheric carbon dioxide observations, and (d) to model carbon dioxide observations within urban systems and at the urban-wildland interfaces of forest ecosystems.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1990

A dynamic growth model of vegetative soya bean plants: model structure and behaviour under varying root temperature and nitrogen concentration

A differential equation model of vegetative growth of the soya bean plant (Glycine max (L.) Merrill cv. Ransom') was developed to account for plant growth in a phytotron system under variation of root temperature and nitrogen concentration in nutrient solution. The model was tested by comparing model outputs with data from four different experiments. Model predictions agreed fairly well with measured plant performance over a wide range of root temperatures and over a range of nitrogen concentrations in nutrient solution between 0.5 and 10.0 mmol NO3- in the phytotron environment. Sensitivity analyses revealed that the model was most sensitive to changes in parameters relating to carbohydrate concentration in the plant and nitrogen uptake rate.

Non-NASA Center↗
NASA NTRS2013

Evaluation of Aerosol Mixing State Classes in the GISS Modele-matrix Climate Model Using Single-particle Mass Spectrometry Measurements

Aerosol particles in the atmosphere are composed of multiple chemical species. The aerosol mixing state, which describes how chemical species are mixed at the single-particle level, provides critical information on microphysical characteristics that determine the interaction of aerosols with the climate system. The evaluation of mixing state has become the next challenge. This study uses aerosol time-of-flight mass spectrometry (ATOFMS) data and compares the results to those of the Goddard Institute for Space Studies modelE-MATRIX (Multiconfiguration Aerosol TRacker of mIXing state) model, a global climate model that includes a detailed aerosol microphysical scheme. We use data from field campaigns that examine a variety of air mass regimens (urban, rural, and maritime). At all locations, polluted areas in California (Riverside, La Jolla, and Long Beach), a remote location in the Sierra Nevada Mountains (Sugar Pine) and observations from Jeju (South Korea), the majority of aerosol species are internally mixed. Coarse aerosol particles, those above 1 micron, are typically aged, such as coated dust or reacted sea-salt particles. Particles below 1 micron contain large fractions of organic material, internally-mixed with sulfate and black carbon, and few external mixtures. We conclude that observations taken over multiple weeks characterize typical air mass types at a given location well; however, due to the instrumentation, we could not evaluate mass budgets. These results represent the first detailed comparison of single-particle mixing states in a global climate model with real-time single-particle mass spectrometry data, an important step in improving the representation of mixing state in global climate models.

climate models↗
NASA NTRS2015

A Vertically Flow-Following, Icosahedral Grid Model for Medium-Range and Seasonal Prediction. Part 1: Model Description

A hydrostatic global weather prediction model based on an icosahedral horizontal grid and a hybrid terrain following/ isentropic vertical coordinate is described. The model is an extension to three spatial dimensions of a previously developed, icosahedral, shallow-water model featuring user-selectable horizontal resolution and employing indirect addressing techniques. The vertical grid is adaptive to maximize the portion of the atmosphere mapped into the isentropic coordinate subdomain. The model, best described as a stacked shallow-water model, is being tested extensively on real-time medium-range forecasts to ready it for possible inclusion in operational multimodel ensembles for medium-range to seasonal prediction.

mathematical models↗
NASA NTRS2017

Mars Propellant Liquefaction and Storage Performance Modeling using Thermal Desktop with an Integrated Cryocooler Model

NASAs current Mars architectures are assuming the production and storage of 23 tons of liquid oxygen on the surface of Mars over a duration of 500+ days. In order to do this in a mass efficient manner, an energy efficient refrigeration system will be required. Based on previous analysis NASA has decided to do all liquefaction in the propulsion vehicle storage tanks. In order to allow for transient Martian environmental effects, a propellant liquefaction and storage system for a Mars Ascent Vehicle (MAV) was modeled using Thermal Desktop. The model consisted of a propellant tank containing a broad area cooling loop heat exchanger integrated with a reverse turbo Brayton cryocooler. Cryocooler sizing and performance modeling was conducted using MAV diurnal heat loads and radiator rejection temperatures predicted from a previous thermal model of the MAV. A system was also sized and modeled using an alternative heat rejection system that relies on a forced convection heat exchanger. Cryocooler mass, input power, and heat rejection for both systems were estimated and compared against sizing based on non-transient sizing estimates.

fluid modeling↗
NASA NTRS2024

Future CH4 Budgets as Modelled By A Fully Coupled Earth System Model Using Prescribed GHG Concentrations vs. Interactive CH4 Sources and Sinks

We have used the NASA Goddard Institute for Space Studies (GISS) Earth system model GISS-E2.1 to study the future budgets and trends of global and regional CH4 under different emission scenarios. GISS-E2.1 is one of the few ESMs that can be driven by anthropogenic CH4 emissions, as well as interactive natural sources such as wetlands, and can simulate the tropospheric CH4 chemistry. In frame of the recent short-lived climate forcers (SLCFs) assessment by the Arctic Monitoring and Assessment Programme (AMAP), we used the GISS-E2.1 model with prescribed long-lived greenhouse gas (GHG) concentrations. In the present study, we have supplemented these simulations using the interactive CH4 sources and sinks in order to quantify the model performance and the sensitivity to CH4 sources and sinks. We have used the Current Legislation (CLE) and the Maximum Feasible Reduction (MFR) emission scenarios from the Eclipse V6b emission database to simulate the future chemical composition and climate impacts from 2015 to 2050. We have also simulated 1995-2014 in order to evaluate the model performance following the AMAP-SLCF protocol. The prescribed GHG version underestimates the Global Atmospheric Watch (GAW) surface CH4 observations during the period between 1995 and 2023 by 1% [-8.4%-2.0%], with a correlation (r) of 0.71 [-0.41 0.99]. The largest underestimations are over the continental emission regions such as North America, Europe, and Asia, while biases are smallest over oceans. On the other hand, the simulation with interactive sources and sinks underestimates the GAW observations more than the prescribed simulation, by 18.5% [-25% -10.4%], with a lower r of 0.36 [-0.82 0.93]. Opposite to the prescribed simulation, the biases are largest over oceans and smaller over the continents, however they are still larger over land than the prescribed simulation. The interactive simulation, with large sources virtually over land and strong sink over oceans, has a land/ocean ratio larger than 1 while the prescribed simulation has this ratio equal to 1 as it distributes the global prescribed CH4 concentration equally in longitude over a given latitude. This clearly shows that the interactive sources and sinks should be represented in models in order to realistically simulate the chemical composition and the oxidative capacity of the atmosphere. As expected, the MFR scenario simulates lower global surface CH4 concentrations and burdens compared to the CLE scenario, however in both cases, global surface CH4 and burden continue to increase through 2050 compared to present day. In the CLE scenario, increases are largest over the equatorial belt, in particular over India and East China, while the MFR scenario shows increases over the whole Southern Hemisphere, however much smaller compared to CLE. Finally, the interactive simulation shows that the chemical CH4 sink increases in the CLE scenario, while it slightly decreases in the MFR, leading to a larger CH4 lifetime in the MFR scenario compared to in the CLE scenario.

CH4↗
NASA NTRS2024

Enabling Advanced Snow Physics within Land Surface Models Through an Interoperable Model-Physics Coupling Framework

Accurate estimation of snow accumulation and melt is a critical part of decision-making in snow-dominated watersheds. In this study, we demonstrate a flexible methodology to couple a detailed snow model, Crocus, separately to two different land surface models (LSMs), Noah-MP and Noah. The original LSMs and the coupled models (Noah-MP-Crocus and Noah-Crocus) are used to simulate snow depth, snow water equivalent, and other water and energy states and fluxes. The results of simulations are compared against a wide range of independent gridded and point scale reference datasets. Our results show that coupling the detailed snow model, Crocus, with the LSMs improves the snow depth and snow water equivalent relative to independent observations. Overall, larger improvements are obtained with coupling Crocus to the Noah LSM, with the coupled Noah-Crocus configuration reducing the RMSE and bias of snow depth from 2-12% and 57-75%, respectively, relative to Snow Data Assimilation System (SNODAS) and snow product from the University of Arizona. On the other hand, smaller improvements are obtained by coupling Crocus with Noah-MP. The Coupled Noah-MP-Crocus reduces the snow depth bias but slightly degrades the RMSE of snow depth and snow water equivalent. The corresponding impacts in other water budget terms such as evapotranspiration, soil moisture, and streamflow, however, are mixed, pointing to the significant need to improve the coupling assumptions of these processes within land models. Overall, the interoperable coupling framework demonstrated here offers the opportunity to include more detailed snow physics and processes, and to advance data assimilation systems through improved exploitation of information from snow remote sensing instruments.

Snow model↗
DOE OSTI2018

CSP-Plant Modeling Guidelines and Compliance of the System Advisor Model (SAM): Preprint

Accurately modeling risks, costs, and electricity output is essential to the financing and advancement of concentrating solar power projects. To address this need, a group of CSP experts created a guideline document, titled SolarPACES Guideline for Bankable STE Yield Assessment (1). To make this information more accessible and allow stakeholders to test specific models against the recommendations, the guidelines have been condensed into a spreadsheet-based checklist. The checklist was applied to NREL's System Advisory Model (SAM) CSP modeling software, providing useful feedback to both the checklist group and the SAM development team. This study showed a strong agreement between SAM and the guidelines, demonstrated the use of the guidelines in model validation, and resulted in several recommended improvements to SAM.

14 SOLAR ENERGY↗
DOE OSTI2024

Fuel Performance Modeling Status Update and Potential Model Improvements

Fuel performance modeling status update and potential model improvements overview of TRISO fuel performance modeling codes PARFUME/BISON, AGR experiment support, potential modeling improvements, BISON smeared cracking model, BISON fission product source term, and AGR-3/4 reirradiation heating test.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Modeling atmospheric data and identifying dynamics Temporal data-driven modeling of air pollutants

Atmospheric modelling has recently experienced a surge with the advent of deep learning. Most of these models, however, predict concentrations of pollutants following a data-driven approach in which the physical laws that govern their behaviors and relationships remain hidden. Furthermore, with the aid of real-world air quality data collected hourly in different stations throughout Madrid, we present a case study using a series of data-driven techniques with the following goals: (1) Find systems of ordinary differential equations that model the concentration of pollutants and their changes over time; (2) assess the performance and limitations of our model using stability analysis; (3) reconstruct the time series of chemical pollutants not measured in certain stations using delay coordinate embedding results.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Use of a Reduced Order Model (ROM) to Simulate SOFC Performance in System Models

Numerical models for design and optimization of fuel cell-based power generation systems require an accurate representation of the SOFC stack performance over a wide range of operating conditions. Response surface techniques were used with detailed SOFC stack model results to create a computationally efficient reduced order model (ROM) of the stack that retains desirable information about its internal state, which can be important in system optimization studies to preclude operation under off-design conditions that can adversely impact overall reliability. A tool was developed to randomly sample selected input parameters, obtain stack solutions for these sampled cases, perform regression to obtain response surfaces for stack performance and other metrics of interest, and export the response surfaces as a ROM. The ROM was then successfully implemented in an Aspen Plus® system model for a natural gas fuel cell (NGFC) power system. Additional work to characterize the ROM’s approximation error is ongoing.

Modeling & Simulation↗
DOE OSTI2026

Model Data Archive for Manuscript Titled "Evaluation of a Coupled Surface–Subsurface Hydrologic Model Using Dense Water‑Level Sensors in a Mixed Urban–Rural Watershed"

This archive provides scripts, input files, and datasets used for the implementation and evaluation of a fully coupled surface–subsurface hydrologic model in the Neches River Basin, southeast Texas. The study uses the Advanced Terrestrial Simulator (ATS) to simulate coupled surface–subsurface hydrologic processes over a mixed urban–rural watershed and evaluates model performance using a dense network of 136 in situ water-level sensors, nine U.S. Geological Survey (USGS) stream gauges, and SSEBop-derived evapotranspiration estimates during the period October 2014–June 2024. The workflow is implemented primarily in Python 3 using the Watershed Workflow package. The Jupyter notebooks can be executed using open-source software such as Anaconda JupyterLab or Visual Studio Code. Other data files include TXT, CSV, XML, SHP, TIF, NetCDF, HDF5, and ExodusII files, which can be processed using the provided Python scripts. ATS input files are provided in XML format and can be edited using any commonly used text editor. This archive contains: *Scripts and input files used to generate the ATS model setup, including watershed discretization, mesh generation, parameter mapping, and model configuration. *Jupyter notebooks used for preprocessing observational data, evaluating streamflow, water levels, and evapotranspiration, computing performance metrics, and generating the figures presented in the manuscript. *ATS simulation outputs and processed observational datasets, including OneRain and DD6 water-level sensors, USGS streamflow observations, GIS data, and supporting spatial datasets used throughout the study.

Dense water-level sensor network↗