Search NASA⌕ Search

SEARCH · Search NASA

Results for “Network Performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Comparing Eyewitness-Derived Trajectories of Bright Meteors to Instrumentally-Observed Data

The NASA Meteoroid Environment Office (MEO) is often called upon to analyze meteors of public interest observed over the United States. Data from meteor networks are often utilized to accomplish this, as are recordings from the general public. When these methods fail, eyewitness reports are the only resource which can be leveraged. The MEO developed a tool to crudely calculate the trajectories of bright meteors from the eyewitness reports submitted to the American Meteor Society. The tool was tested on eyewitness data for 33 cases and compared to observed data from the NASA All Sky Fireball Network. The tool performed better for cases with more than 75 eyewitness reports than those with fewer than 75, by almost a factor of two across all metrics except for the end height. For these cases, the eyewitness-derived trajectory was about 50 km from the observed trajectory, the radiant was within 15deg, and the speed was within 20% of that observed on average. A description of the tool, example case studies, and general trends are described.

D E Moser↗

Prognostics As-A-Service: A Scalable Cloud Architecture for Prognostics

Comprehensive aircraft system health-state awareness is critical for maintaining safe, efficient growth in global operations, enabling higher levels of autonomy, and facilitating new forms of aviation. Maintainers, vehicle operators, air traffic controllers, dispatchers, pilots, autonomous systems, and other decision-makers must have reliable real-time knowledge of the vehicle health, the health of its critical composite systems, predictions of how health changes with time, and forecasts of how its capabilities change with health degradation to preserve safety and efficiency. Providing this information in a reliable manner in computationally constrained environments and across a wide range of vehicles and systems continues to be a challenge. This challenge can be partially resolved through cloud computing, where the execution of prognostic and diagnostic algorithms is performed on a network of remote servers hosted on the internet. NASA is developing a cloud computing service, Prognostics As-A-Service (PaaS), that explores the feasibility and challenges of cloud-enhanced prognostics. Though such a system has broad applicability, this research effort is focused on aviation applications.

Prognostics↗

Deep Learning Emulation of Atmospheric Correction for Geostationary Sensors

New generation geostationary satellites make reflectance observations available at a continental scale with unprecedented spatiotemporal resolution and spectral range. Generating Earth monitoring products from these observations requires retrieval of the basic parameter, surface reflectance (SR), by atmospheric correction (AC). Algorithms for atmospheric correction, including Multi-Angle Implementation of Atmospheric Correction (MAIAC), are adapted for each sensor and are too computationally complex to be run in real time, relying instead on look-up tables with precomputed values. Machine learning methods, including convolutional neural networks, have demonstrated performance in learning complex, nonlinear mappings and extracting insight from high-dimensional remote sensing data. In this work, we present a deep learning emulator of MAIAC to retrieve both SR and cloud products. Using this adaptation of deep learning-based emulation to remote sensing, we demonstrate stable SR retrieval over a variety of land covers and viewing conditions and accurate cloud detection. Further, a comparison of computation time suggests emulation as a compelling alternative for expensive physical simulation, especially for applications benefited by near-real time data, such as agricultural management and disaster response.

Duffy, Kate↗

Mine Discrimination Using Multispectral Imagery With Feedforward Neural Networks

Simulated mine detection was performed on a polarimetric hyperspectral imaging dataset collected by using an acousto-optic tunable filter camera. A feedforward artificial neural network was programmed to recognize predefined spectral "templates." The simulation results are provided along with the preprocessing steps and window sizes leading to mine detection without false alarms.

polarimetric↗

Characterizing Student-Driven Research Investigations Contributed to the GLOBE Program Citizen Science Initiative in a Formal Education Context

The Global Learning and Observations to Benefit the Environment (GLOBE) Program offers citizen science opportunities to participants of all ages, with a focus on youth in formal classroom contexts. This study uses student investigation research reports and posters submitted to the 2018 International Virtual Science Symposium (IVSS) and Student Research Symposium (SRS) as testbeds for characterizing student-driven Earth system citizen science investigations. Secondarily, this study aimed to capture GLOBE’s alignment to existing citizen science outcomes frameworks in the literature, which have primarily focused on adults and non-formal settings. Based on a literature review, the evaluation team identified 89 potential characteristics in 27 categories to typify investigations from both formal education and citizen science perspectives. We coded the artifacts from 207 student projects, conducted quantitative analysis of frequencies, and performed a semantic network analysis. By using this networking approach, we conceptually mapped several clusters of co-occurring characteristics, defining a descriptive framework for GLOBE projects. We identified three tiers of citizen science projects, increasing in the sophistication of participants’ demonstrated science practices. The framework includes additional components that reflect student citizen scientists’ thoughtfulness and connection to context as well as their projects’ reflection of their motivation and self efficacy. Through these findings, we have identified areas where student citizen scientists would benefit from further support, and suggest here further research to incorporate the experiences of students into the broader understanding of citizen science outcomes.

network analysis↗

Classification of Notices to Airmen using Natural Language Processing

This paper establishes the feasibility of using Natural Language Processing (NLP) to classify NOTAMs or Notices to Airmen – a pilot messaging framework to gather real-time situational awareness. Present day air mobility operations heavily rely on NOTAMs. However, pilots often have difficulty interpreting NOTAMs due to the sheer volume of inapplicable messages and unclear abbreviations. Using NLP, the presented study analyzes the accuracy of classifying NOTAMs and, thereby, the efficiency of generating actionable interpretations in real time. To this effect, efficacies of four NLP neural network architectures were analyzed, including three Recurrent Neural Networks (RNNs) with GloVe, Word2Vec, and FastText word embeddings, and one trained Bi-Directional Encoder Representations from Transformers (BERT) model. The four neural networks were trained and evaluated on three open-source datasets of varying text lengths, vocabularies, and grammars, taken from e-commerce product descriptions, social media tweets, and unstructured descriptions for data and analytics services on open data marketplaces such as NASA’s Data and Reasoning Fabric (DRF) platform. This provided cross-analysis of each neural network architecture’s performance per text type. The best performing architecture, BERT, was then fine-tuned on a collection of open-source NOTAM data. Post-training, a real-time NOTAM classification service was implemented to draw inference on new NOTAMs using the trained model, which demonstrated close to 99% accuracy in classification. This modular classification service is envisioned to be integrated with a data and analytics delivery platform, such as the DRF, thus availing real-time contextualization of NOTAMs to air mobility clients, humans, and machines for enhanced decision making.

Aiden C. Szeto↗

Classification of Notices to Airmen using Natural Language Processing

This paper establishes the feasibility of using Natural Language Processing (NLP) to classify NOTAMs or Notices to Airmen – a pilot messaging framework to gather real-time situational awareness. Present day air mobility operations heavily rely on NOTAMs. However, pilots often have difficulty interpreting NOTAMs due to the sheer volume of inapplicable messages and unclear abbreviations. Using NLP, the presented study analyzes the accuracy of classifying NOTAMs and, thereby, the efficiency of generating actionable interpretations in real time. To this effect, efficacies of four NLP neural network architectures were analyzed, including three Recurrent Neural Networks (RNNs) with GloVe, Word2Vec, and FastText word embeddings, and one trained Bi-Directional Encoder Representations from Transformers (BERT) model. The four neural networks were trained and evaluated on three open-source datasets of varying text lengths, vocabularies, and grammars, taken from e-commerce product descriptions, social media tweets, and unstructured descriptions for data and analytics services on open data marketplaces such as NASA’s Data and Reasoning Fabric (DRF) platform. This provided cross-analysis of each neural network architecture’s performance per text type. The best performing architecture, BERT, was then fine-tuned on a collection of open-source NOTAM data. Post-training, a real-time NOTAM classification service was implemented to draw inference on new NOTAMs using the trained model, which demonstrated close to 99% accuracy in classification. This modular classification service is envisioned to be integrated with a data and analytics delivery platform, such as the DRF, thus availing real-time contextualization of NOTAMs to air mobility clients, humans, and machines for enhanced decision making.

Aiden Szeto↗

STANDARDIZATION OF CEBAF 12 GEV UPGRADE CAVITY TESTING

CEBAF 12GeV upgrade project includes 80 new 7-cell cavities to form 10 cryomodules. Each cavity underwent RF qualification at 2.07K using a high power accelerating gradient test and an HOM survey in Jefferson Lab's Vertical Testing Area (VTA) before cavity string assembly. In order to ensure consistently high quality data, updated cavity testing procedures and analysis were implemented and used by a group of VTA operators. For high power tests, a cavity testing procedure was developed and used in conjunction with a LabVIEW program to collect the test data. Additionally while the cavity was at 2.07K, an HOM survey was performed using a network analyzer and a combination of Excel and Mathematica programs. Data analysis was standardized and an online logbook, Pansophy, was used for data storage and mining. The Pansophy system allowed test results to be easily summarized and searchable across all cavity tests. In this presentation, the CEBAF 12GeV upgrade cavity testing procedure, method for data analysis, and results reporting results will be discussed.

43 PARTICLE ACCELERATORS↗

OpenCGRA: An Open-Source Unified Framework for Modeling,Testing, and Evaluating CGRAs

Coarse-grained reconfigurable arrays (CGRAs),loosely defined as arrays of functional units (e.g, adder, sub-tractor, multiplier, divider, or larger multi-operation units, butsmaller than a general-purpose core) interconnected through aNetwork-on-Chip, provide higher flexibility than domain-specificASIC accelerators while offering increased hardware efficiencywith respect to fine-grained reconfigurable devices, such as FieldProgrammable Gate Arrays (FPGAs). The fast evolving fieldsof machine learning and edge computing, which are seeing acontinuous flow of novel algorithms and larger models, makeCGRAs ideal target architectures to allow domain specializationwithout loosing too much generality. They also generally offerquicker and more effective reconfigurability than FPGAs, po-tentially allowing adaptation during actual algorithm execution,and implement a dataflow programming paradigm that adaptswell to these emerging workloads. Designing and generating aCGRA, however, still requires to define the type and number ofthe specific functional units, implement their interconnect andthe network topology, and perform its simulation and validation,given a variety of workloads of interest.In this paper, we propose OpenCGRA, a Python-based unifiedframework that integrates generation, modeling, testing and eval-uation for CGRAs. OpenCGRA is the first open-source integratedframework able to support the full top-to-bottom design flow forspecializing and implementing CGRAs: modeling at different ab-straction levels (functional level, cycle level, register-transfer level),generation, simulation, testing at different granularities (unit test-ing, integration testing, property-based testing), and characteriza-tion (area, power, and timing). OpenCGRAs will be made availableon GitHub.

CGRA, synthesis↗

Multiscale wireless sensor node for impedance-based SHM and low-frequency vibration data acquisition

This paper presents recent developments in an extremely compact, wireless impedance sensor node (WID3, Wireless Impedance Device) at Los Alamos National Laboratory for use in impedance-based structural health monitoring (SHM), Sensor diagnostics and low-frequency vibrational data acquisition. The current generation WID3 is equipped with an Analog Devices AD5933 impedance chip that can resolve measurements up to 100 kHz, a frequency range ideal for many SHM applications. An integrated set of multiplexers allows the end user to monitor seven piezoelectric sensors from a single sensor node. The WID3 combines on-board processing using an Atmega1281 microcontroller, data storage using flash memory, wireless communications capabilities, and a series of internal and external triggering options into a single package to realize a truly comprehensive, self-contained wireless active-sensor node for SHM applications. Furthermore, we recently extended the capability of this device by implementing low-frequency analog to digital and digital and analog converters so that the same device can measure structural vibration data. The WID3 requires less than 70 mW of power to operate, and it can operate in various wireless network paradigms. The performance of this miniaturized and portable device is compared to our previous results and its broader capabilities are demonstrated.

42 ENGINEERING↗

A Flexible Reservation Algorithm for Advance Network Provisioning

Many scientific applications need support from a communication infrastructure that provides predictable performance, which requires effective algorithms for bandwidth reservations. Network reservation systems such as ESnet's OSCARS, establish guaranteed bandwidth of secure virtual circuits for a certain bandwidth and length of time. However, users currently cannot inquire about bandwidth availability, nor have alternative suggestions when reservation requests fail. In general, the number of reservation options is exponential with the number of nodes n, and current reservation commitments. We present a novel approach for path finding in time-dependent networks taking advantage of user-provided parameters of total volume and time constraints, which produces options for earliest completion and shortest duration. The theoretical complexity is only O(n2r2) in the worst-case, where r is the number of reservations in the desired time interval. We have implemented our algorithm and developed efficient methodologies for incorporation into network reservation frameworks. Performance measurements confirm the theoretical predictions.

97 MATHEMATICS AND COMPUTING↗

DSN 70-meter antenna microwave optics design and performance improvements. Part 2: Comparison with measurements

The measured Deep Space Network (DSN) 70-meter antenna performance at S- and X-bands is compared with the design expectations. A discussion of natural radio-source calibration standards is given. New estimates of DSN 64-meter antenna performance are given, based on improved values of calibration source flux and size correction. A comparison of the 64- and 70-meter performances shows that average S-band peak gain improvement is 1.94 dB, compared with a design expectation of 1.77 dB. At X-band, the average peak gain improvement is 2.12 dB, compared with the (coincidentally similar) design expectation of 1.77 dB. The average measured 70-meter S-band peak gain exceeds the nominal design-expected gain by 0.02 dB; the average measured 70-meter X-band peak gain is 0.14 dB below the nominal design-expected gain.

Bathker, D. A.↗

A tough high performance composite matrix

This invention is a semi-interpenetrating polymer network which includes a high performance thermosetting polyimide having a nadic end group acting as a crosslinking site and a high performance linear thermoplastic polyimide. An improved high temperature matrix resin is provided which is capable of performing in the 200 to 300 C range. This resin has significantly improved toughness and microcracking resistance, excellent processability, mechanical performance and moisture and solvent resistances.

Pater, Ruth H.↗

Tough high performance composite matrix

This invention is a semi-interpentrating polymer network which includes a high performance thermosetting polyimide having a nadic end group acting as a crosslinking site and a high performance linear thermoplastic polyimide. Provided is an improved high temperature matrix resin which is capable of performing in the 200 to 300 C range. This resin has significantly improved toughness and microcracking resistance, excellent processability, mechanical performance, and moisture and solvent resistances.

Pater, Ruth H.↗

DeepWelding: a Deep Learning Enhanced Approach to GTAW Using Multi-source Sensing Images

Deep learning has great potential to reshape manufacturing industries. In this paper, we present DeepWelding, a novel framework that applies deep learning techniques to improve gas tungsten arc welding (GTAW) process monitoring and penetration detection using multi-source sensing images. The framework is capable of analyzing multiple types of optical sensing images synchronously and consists of three deep learning enhanced consecutive phases: image preprocessing, image selection, and weld penetration classification. Specifically, we adopted generative adversarial networks (pix2pix) for image denoising and classic convolutional neural networks (AlexNet) for image selection. Both pix2pix and AlexNet delivered satisfactory performance. However, five individual neural networks with heterogeneous architectures demonstrated inconsistent generalization capabilities in the classification phase when holding out multi-source images generated with specific experimental settings. Therefore, two ensemble methods combining multiple neural networks were designed to improve the model performance on unseen data collected from different experimental settings. In conclusion, we also found that the quality of model prediction was heavily influenced by the data stream collection environment. We think these findings are beneficial for the broad intelligent welding community.

42 ENGINEERING↗

Multi-hydrophilic functional network enables porous membranes excellent anti-fouling performance for highly efficient water remediation

Membrane technology is believed as a cost-effective approach for solving the water issues, where as it suffers from serious membrane fouling. Surface grafting and surface coating have been proved to be effective in abating the membrane fouling; however, these processes always need additional procedures and compromise the initial permeance of the membranes. Herein, we developed a kind of highly permeable polyacrylonitrile (PAN) membranes with excellent anti-fouling performance through one-step phase inversion of the PAN casting solution containing water-soluble active additives. During the process, the water-soluble active additives could segregate towards the membrane surface and pore walls; thereby finely tailoring the pore structures of the PAN-based membranes. Moreover, the active additives could react with each other to form crosslinked networks containing multi-hydrophilic functional groups including CH2-O-CH2, -OH or-Si-OH. Consequently, the PAN-based membranes exhibited surprising superhydrophilicity with water contact angle below 10. even after soaking in water for one week and the anti-fouling permeance of the membranes increased significantly with permeance recovery rate above 93%. Interestingly, the modified membranes also demonstrated both high permeances and high separation efficiency, thereby showing strong promise in water environmental remediation including wastewater treatment and oil/water emulsion separation.

Anti-fouling↗

Laser network survey and orbit recovery

Simulations were performed for the anticipated GEOS-C laser network stations at Goddard, Bermuda, and Florida to predict how well survey and orbit will be recovered. Lasers were added one at a time at Grand Turk, Antigua, and Panama to estimate the contribution from these additional sites. Time tag biases of 50 microseconds, survey uncertainties of 10 meters in each coordinate, laser range biases and noise estimates of 20 cm each, and conventional gravity uncertainties were included in the simulations. The results indicate that survey can be recovered to about 1 meter and Grand Turk can be recovered better than Antigua or Panama. Reducing the probably pessimistic assumed time tag biases and gravity field uncertainties improves the results. Using these survey recovery estimates, the short arc GEOS-C satellite heights for altimeter intercomparison orbits can be recovered within the calibration area to better than the required two meters.

Berbert, J. H.↗

Experimental Demonstration of Ferroelectric Spiking Neurons for Unsupervised Clustering

© 2018 IEEE. We report the first experimental demonstration of ferroelectric field-effect transistor (FEFET) based spiking neurons. A unique feature of the ferroelectric (FE) neuron demonstrated herein is the availability of both excitatory and inhibitory input connections in the compact 1T-1FEFET structure, which is also reported for the first time for any neuron implementations. Such dual neuron functionality is a key requirement for bio-mimetic neural networks and represents a breakthrough for implementation of the third generation spiking neural networks (SNNs) - also reported herein for unsupervised learning and clustering on real world data for the first time. The key to our demonstration is the careful design of two important device level features: (1) abrupt hysteretic transitions of the FEFET with no stable states therein, and (2) the dynamic tunability of the FEFET hysteresis by bias conditions which allows for the inhibition functionality. Experimentally calibrated, multi-domain Preisach based FEFET models were used to accurately simulate the FE neurons and project their performance at scaled nodes. We also implement an SNN for unsupervised clustering and benchmark the network performance across analog CMOS and emerging technologies and observe (1) unification of excitatory and inhibitory neural connections, (2) STDP based learning, (3) lowest reported power (3.6nW) during classification, and (4) a classification accuracy of 93%.

Wang, Z↗