Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA ELECTRODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

A highly miniaturized electron and ion energy spectrometer prototype for the rapid analysis of space plasmas

MEMS (Micro Electro-Mechanical Systems) plasma analyzers are a promising possibility for future space missions but conventional instrument designs are not necessarily well suited to micro-fabrication. Here, a candidate design for a MEMS-based instrument has been prototyped using electron-discharge machining. The device features 10 electrostatic analyzers that, with a single voltage applied to it, allow five different energies of electron and five different energies of positive ion to be simultaneously sampled. It has been simulated using SIMION and the electron response characteristics tested in an instrument calibration chamber. Small deviations found in the electrode spacing of the as-built prototype were found to have some effect on the electron response characteristics but do not significantly impede its performance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dynamics of ionization processes in high-pressure nitrogen, air, and SF{sub 6} during a subnanosecond breakdown initiated by runaway electrons

The dynamics of ionization processes in high-pressure nitrogen, air, and SF{sub 6} during breakdown of a gap with a nonuniform distribution of the electric field by nanosecond high-voltage pulses was studied experimentally. Measurements of the amplitude and temporal characteristics of a diffuse discharge and its radiation with a subnanosecond time resolution have shown that, at any polarity of the electrode with a small curvature radius, breakdown of the gap occurs via two ionization waves, the first of which is initiated by runaway electrons. For a voltage pulse with an ∼500-ps front, UV radiation from different zones of a diffuse discharge is measured with a subnanosecond time resolution. It is shown that the propagation velocity of the first ionization wave increases after its front has passed one-half of the gap, as well as when the pressure in the discharge chamber is reduced and/or when SF{sub 6} is replaced with air or nitrogen. It is found that, at nitrogen pressures of 0.4 and 0.7 MPa and the positive polarity of the high-voltage electrode with a small curvature radius, the ionization wave forms with a larger (∼30 ps) time delay with respect to applying the voltage pulse to the gap than at the negative polarity. The velocity of the second ionization wave propagating from the plane electrode is measured. In a discharge in nitrogen at a pressure of 0.7 MPa, this velocity is found to be ∼10 cm/ns. It is shown that, as the nitrogen pressure increases to 0.7 MPa, the propagation velocity of the front of the first ionization wave at the positive polarity of the electrode with a small curvature radius becomes lower than that at the negative polarity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Conditions and growth rate of Rayleigh instability in a Hall thruster under the effect of ion temperature

Rayleigh instability is investigated in a Hall thruster under the effect of finite temperature and density gradient of the plasma species. The instability occurs only when the frequency of the oscillations {omega} falls within a frequency band described by k{sub y}u{sub 0}+(1/k{sub y})({partial_derivative}{sup 2}u{sub 0}/{partial_derivative}x{sup 2})+({Omega}/k{sub y}n{sub 0})({partial_derivative}n{sub 0}/{partial_derivative}x)<<{omega}<{radical}((Y{sub i}T{sub i}k{sub y}{sup 2}/M)+({omega}{sub pi}{sup 2}({Omega}{sup 2}+Y{sub e}T{sub e}k{sub y}{sup 2}/Y{sub e} T{sub e}k{sub y}{sup 2}mm)/({omega}{sub pe}{sup 2}+{Omega}{sup 2}+Y{sub e}T{sub e}k{sub y}{sup 2}/Y{sub e}T{sub e}k{sub y}{sup 2}mm))), where u{sub 0} is the drift velocity of the electrons, {Omega} is their gyration frequency under the effect of the magnetic field, k{sub y} is the wave propagation constant, n{sub 0} is the plasma density together with {partial_derivative}n{sub 0}/{partial_derivative}n{sub 0}{partial_derivative}x{partial_derivative}x as the density gradient, and T{sub i}(T{sub e}), M(m), Y{sub i}(Y{sub e}), and {omega}{sub pi}({omega}{sub pe}) are the temperature, mass, specific heat ratio, and plasma frequency of the ions (electrons), respectively. A relevant Rayleigh equation is derived and solved numerically using the fourth-order Runge-Kutta method for investigating the perturbed potential under the effect of electron drift velocity, channel length, magnetic field, ion temperature, and electron temperature. The instability grows faster because of the magnetic field, ion temperature, and drift velocity of the electrons but its growth rate is reduced because of the electron temperature, channel length, and also its far distances from the anode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of diagnostic and manipulation systems for space-charge dominated electron beams and confined electron plasmas in ELTRAP

Modifications have been implemented in the Penning-Malmberg device ELTRAP aimed at performing studies on the dynamics of space-charge dominated nanosecond electron bunches traveling along the magnetic field. In particular, a Thomson backscattering apparatus has been developed where an infrared (IR) laser pulse collides with the bunched electron beam. The frequency-shifted backscattered radiation, acquired by means of a photomultiplier (PMT), can be exploited to evaluate information on energy, energy spread and density of the bunch. The achievable sensitivity of the diagnostics has been estimated, and valuable information on the main parameters affecting the signal-to-noise (S/N) ratio has been obtained [B. Paroli, F. Cavaliere, M. Cavenago, F. De Luca, M. Ikram, G. Maero, C. Marini, R. Pozzoli, and M. Rome, JINST 7, P01008 (2012)]. A series of upgrades are under way, aimed at increasing the S/N ratio through the use of a new laser for the electron source, the insertion of a stray light shield, and the optimization of the detection electronics. Moreover, electromagnetic simulations relevant to the design and implementation of a microwave heating system are presented. The generation of an electron plasma in ELTRAP by means of a low-power radio frequency (RF) drive in the MHz range applied on one of the trap electrodes and under ultra-high vacuum (UHV) conditions has previously been demonstrated [B. Paroli, F. De Luca, G. Maero, F. Pozzoli, and M. Rome, Plasma Sources Sci. Technol. 19, 045013 (2010)]. The new heating system will allow the extension of the RF studies to the GHz range and in particular the production of a more energetic electron plasma via cyclotron resonant excitation.

43 PARTICLE ACCELERATORS↗

Modeling of current characteristics of segmented Langmuir probe on DEMETER

We model the current characteristics of the DEMETER Segmented Langmuir probe (SLP). The probe is used to measure electron density and temperature in the ionosphere at an altitude of approximately 700 km. It is also used to measure the plasma flow velocity in the satellite frame of reference. The probe is partitioned into seven collectors: six electrically insulated spherical segments and a guard electrode (the rest of the sphere and the small post). Comparisons are made between the predictions of the model and DEMETER measurements for actual ionospheric plasma conditions encountered along the satellite orbit. Segment characteristics are computed numerically with PTetra, a three-dimensional particle in cell simulation code. In PTetra, space is discretized with an unstructured tetrahedral mesh, thus, enabling a good representation of the probe geometry. The model also accounts for several physical effects of importance in the interaction of spacecraft with the space environment. These include satellite charging, photoelectron, and secondary electron emissions. The model is electrostatic, but it accounts for the presence of a uniform background magnetic field. PTetra simulation results show different characteristics for the different probe segments. The current collected by each segment depends on its orientation with respect to the ram direction, the plasma composition, the magnitude, and the orientation of the magnetic field. It is observed that the presence of light H{sup +} ions leads to a significant increase in the ion current branch of the I-V curves of the negatively polarized SLP. The effect of the magnetic field is demonstrated by varying its magnitude and direction with respect to the reference magnetic field. It is found that the magnetic field appreciably affects the electron current branch of the I-V curves of certain segments on the SLP, whereas the ion current branch remains almost unaffected. PTetra simulations are validated by comparing the computed characteristics and their angular anisotropy with the DEMETER measurements, as simulation results are found to be in good agreement with the measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Langmuir Probe Measurements in an Inductively Coupled Ar/CF4 Plasmas

Technological advancement in the microelectronics industry requires an understanding of the physical and chemical processes occurring in plasmas of fluorocarbon gases, such as carbon tetrafluoride (CF4) which is commonly used as an etchant, and their mixtures to optimize various operating parameters. In this paper we report data on electron number density (ne), electron temperature'(Te), electron energy distribution function (EEDF), mean electron energy, ion number density (ni), and plasma potential (Vp) measured by using Langmuir probe in an inductively coupled 13.56 MHz radio frequency plasmas generated in 50%Ar:50%CF4 mixture in the GEC cell. The probe data were recorded at various radial positions providing radial profiles of these plasma parameters at 10-50 mTorr pressures and 200 W and 300 W of RF power. Present measurements indicate that the electron and ion number densities increase with increase in pressure and power. Whereas the plasma potential and electron temperature decrease with increase in pressure, and they weakly depend on RF power. The radial profiles exhibit that the electron and ion number densities and the plasma potential peak at the center of the plasma with an exponential fall away from it, while the electron temperature has a minimum at the center and it increases steadily towards the electrode edge. The EEDFs have a characteristic drop near the low energy end at all pressures and pressures and their shapes represent non-Maxwellian plasma and exhibit more like Druyvesteyn energy distribution.v

Rao, M. V. V. S.↗

Experimental and numerical investigations of the phase-shift effect in capacitively coupled discharges

The phase-shift effect has been investigated by a Langmuir probe and a fluid model in Ar capacitively coupled plasmas at 50 mTorr. In the discharge, two sources with the same frequency, i.e., 27.12 MHz, are applied on the top and bottom electrodes simultaneously, and the phase shift between them varies from 0 to π. It is found that the electron density has an off-axis peak near the radial edge when the phase difference is equal to 0 due to the electrostatic edge effect, and the best radial uniformity is observed at a phase difference equal to π. Furthermore, when the voltage increases, the best radial uniformity is obtained at lower phase shift values. Moreover, the electron energy probability function has a bi-temperature structure at all the selected phase differences at r = 1–15 cm. The evolution of the plasma characteristics with the phase difference implies that the best radial uniformity can be obtained, by balancing the electrostatic edge effect and the phase shift effect.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of Penning effect on the plasma features in a non-equilibrium atmospheric pressure plasma jet

Non-equilibrium atmospheric pressure plasma jet (APPJ) is a cold plasma source that promises various innovative applications. The influence of Penning effect on the formation, propagation, and other physical properties of the plasma bullets in APPJ remains a debatable topic. By using a 10 cm wide active electrode and a frequency of applied voltage down to 0.5 Hz, the Penning effect caused by preceding discharges can be excluded. It was found that the Penning effect originating in a preceding discharge helps build a conductive channel in the gas flow and provide seed electrons, thus the discharge can be maintained at a low voltage which in turn leads to a smaller propagation speed for the plasma bullet. Photographs from an intensified charge coupled device reveal that the annular structure of the plasma plume for He is irrelevant to the Penning ionization process arising from preceding discharges. By adding NH{sub 3} into Ar to introduce Penning effect, the originally filamentous discharge of Ar can display a rather extensive plasma plume in ambient as He. These results are helpful for the understanding of the behaviors of non-equilibrium APPJs generated under distinct conditions and for the design of plasma jet features, especially the spatial distribution and propagation speed, which are essential for application.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamic characteristics of gas-water interfacial plasma under water

Gas-water interfacial plasmas under water were generated in a compact space in a tube with a sandglass-like structure, where two metal wires were employed as electrodes with an applied 35 kHz ac power source. The dynamic behaviors of voltage/current were investigated for the powered electrode with/without water cover to understand the effect of the gas-water interface. It is found that the discharge exhibits periodic pulsed currents after breakdown as the powered electrode is covered with water, whereas the electrical current reveals a damped oscillation with time with a frequency about 10{sup 6} Hz as the powered electrode is in a vapor bubble. By increasing water conductivity, a discharge current waveform transition from pulse to oscillation presents in the water covering case. These suggest that the gas-water interface has a significant influence on the discharge property.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Performance of the university of saskatchewan compact torus injector with curved acceleration electrodes

The first vertical compact torus (CT) injection experiment has been performed in the Saskatchewan Torus Modified (STOR-M) tokamak [Nucl. Fusion 46, 104 (2006)]. To increase the kinetic energy density of the injected CTs for deeper penetration, the University of Saskatchewan Compact Torus Injector (USCTI) was further modified by attaching a 90 deg. curved inner electrode coaxial with the outer electrode. The modification extended the original CT acceleration section from 60 to 114 cm. Effects of the curved acceleration electrodes on the velocity and magnetic field of the CT are reported in this paper. It has been found that the CTs, injected horizontally, were deflected to vertical direction and CT velocity measured at the curved acceleration section increased to 180 km/s, representing a 40% increase compared with the case without the curved inner electrode in a previous experiment. At a higher acceleration bank voltage of 16 kV, this velocity increased to about 270 km/s. In addition, amplification of the CT magnetic field in the curved acceleration section has also been observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two-dimensional simulation of discharge channels in atmospheric-pressure single dielectric barrier discharges

A two-dimensional fluid model is developed to study the filaments (or discharge channels) in atmospheric-pressure discharge with one plate electrode covered by a dielectric layer. Under certain discharge parameters, one or more stable filaments with wide radii could be regularly arranged in the discharge space. Different from the short-lived randomly distributed microdischarges, this stable and thick filament can carry more current and have longer lifetime. Because only one electrode is covered by a dielectric layer in the simulation, the formed discharge channel extends outwards near the dielectric layer and shrinks inwards near the naked electrode, agreeing with the experimental results. In this paper, the evolution of channel is studied, and its behavior is like a streamer or an ionization wave, but the propagation distance is short. The discharge parameters such as voltage amplitude, electrode width, and N{sub 2} impurities content could significantly influence the number of discharge channel, which is discussed in the paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Recent advances in understanding the role of solvated electrons at the plasma-liquid interface of solution-based gas discharges

The solvated electron is one of the strongest known reducing species. Solution-based glow discharges, in which a gaseous discharge is ignited between a metal electrode and a liquid surface, are an emerging spectrochemical source in analytical atomic emission and mass spectrometry. In other disciplines, the similar setup is called plasma electrolysis and can be used for materials and chemical synthesis. Regardless of its name and application areas, electrons are injected into a solution and the underlying physics and chemistry in these systems is complex. Furthermore, quantitative understanding is necessary in order to maximize performance for chemical and materials applications. In this paper, we summarize the state-of-the-art in plasma-liquid interactions involving solvated electrons, with a particular emphasis on the work by our group, and highlight potential areas of future study to both fill in knowledge gaps and drive applications forward.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Generation of dust projectiles passing over an obstacle in the plasma sheath

Dust projectiles were produced in a radio-frequency plasma by increasing 6-fold the radio-frequency power put into the discharge. The initial static dust particles were observed to gain speed while moving away from the confining region and escaped from the inter-electrode space on a ballistic-like trajectory. Single-grain dynamics simulations indicated that the dust particles were accelerated by changes induced in the sheath electric field profile.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Emission characteristics of H{sup -} ion source with inverse gas magnetron geometry

The work is dedicated to the experimental investigation of the intense volume-plasma H{sup -} ion source. Preliminary experimental researches of two parameters of the upgraded source - emission density of H{sup -} ions and gas flow - are represented below. In plasma volume of noncesium H{sup -} ion source, the conditions for obtaining of increased density of H{sup -} ions in the field of adjoining to the emission aperture were realized. The advancing of electrode system of the emission chamber of a source has allowed receiving the value of an emission density of H{sup -} ions equal to 600 mA/cm{sup 2}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Generation of High-Intensity Aluminum-Ion Beams at Low Energy

High-intensity repetitively pulsed beams of low-energy aluminum ions are generated in experiments. A continuous vacuum–arc discharge is used as a generator of metal plasma. Aluminum-ion beams with a current density of up to 0.47 A/cm{sup 2} are generated owing to the plasma immersion extraction of ions with subsequent ballistic focusing in the drift space of potential electrodes. Regularities of the generation of high-intensity ion beams are studied at a pulse repetition rate of 10{sup 5} pulses per second versus bias voltage ranging from 1.2 to 3 kV, pulse duration ranging from 2 to 8 μs, and residual gas pressure. Transport efficiency and beam focusing are determined by the conditions for neutralization of the space charge. Even under complete filling of the drift space with preliminary injected plasma, the conditions for neutralization of space charge are dynamically varied due to an increase in the space charge upon ballistic focusing. Experimental results are presented to prove formation of a virtual anode under conditions for insufficient plasma injection in the drift space of the beam. It is shown that the transport efficiency of the high-intensity beam may substantially be increased in the presence of argon in the experimental chamber.

43 PARTICLE ACCELERATORS↗

Measurement of the internal magnetic fluctuation by the transport of runaways on J-TEXT

The measurement of internal magnetic fluctuation is important for the study of transport in tokamak plasmas. The runaway electron transport induced by the sawtooth crash can be used to obtain the internal magnetic fluctuation. Inversed sawtooth-like activities on hard x-ray (HXR) fluxes following sawtooth activities were observed after the application of electrode biasing on J-TEXT tokamak. The runaway diffusion coefficient D{sub r} is deduced to be about 30 m{sup 2}/s according to the time delay of HXR flux peaks to the sawtooth crashes. The averaged value of normalized magnetic fluctuation in the discharges with electrode biasing was increased to the order of 1 × 10{sup −4}.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Experimental study of the ion flux parameters and anode plasma dynamics in the Angara-5-1 facility

Results are presented from experimental studies of the anode plasma dynamics and measurements of the ion flux ejected along the axis of a high-current Z-pinch. Pinch discharges were formed by the implosion of tungsten wire arrays in the Angara-5-1 facility. It is shown that the ion energy spectrum depends on the mass and configuration of wire arrays, as well as on the diameter of the anode aperture. The shape of the ion spectrum indicates that the plasma propagates in the form of a compact plasmoid. Shadow and X-ray images of the plasma show that the axial velocity of the plasma outflowing through the anode aperture is comparable with the velocity of radial plasma compression and, for tungsten ions, can reach a value corresponding to an energy of 100 keV. The experimental data indicate that the ion energy spectrum mainly forms due to the electrodynamical acceleration of the plasma and cumulative jets. A possible mechanism for the production of compact plasma formations in the course of electrodynamic plasma acceleration is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Performance Enhancement of PFET Planar Devices by Plasma Immersion Ion Implantation (P3I)

A study of doping the pMOS Lightly Doped Drain (LDD) by Plasma Immersion Ion Implantation (P3i) with BF3 is presented which demonstrates a better transistor performance compared to standard beam line Ion Implantation (I/I). The benefit of P3i comes from the broad angular distribution of the impinging ions thereby doping the poly-silicon gate sidewall as well. Gate capacitance of short channel devices has been measured and clearly shows this improvement. This model is clearly supported by high resolution 2D-carrier profiles using Scanning Spreading Resistance Microscopy (SSRM) which shows this gate sidewall doping. The broad angular distribution also implies a smaller directional sensitivity (to for instance the detailed gate edge shape) and leads to devices which are perfectly balanced, when Source and Drain electrode are switched.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗