Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle Size Distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Droplet size distributions in turbulent clouds: experimental evaluation of theoretical distributions

Precipitation efficiency and optical properties of clouds, both central to determining Earth's weather and climate, depend on the size distribution of cloud particles. Here in this paper, theoretical expressions for cloud droplet size distribution shape are evaluated using measurements from controlled experiments in a convective-cloud chamber. The experiments are a unique opportunity to constrain theory because they are in steady-state and because the initial and boundary conditions are well characterized compared to typical atmospheric measurements. Three theoretical distributions obtained from a Langevin drift-diffusion approach to cloud formation via stochastic condensation are tested: (a) stochastic condensation with a constant removal time-scale; (b) stochastic condensation with a size-dependent removal time-scale; (c) droplet growth in a fixed supersaturation condition and with size-dependent removal. In addition, a similar Weibull distribution that can be obtained from the drift-diffusion approach, as well as from mechanism-independent probabilistic arguments (e.g., maximum entropy), is tested as a fourth hypothesis. Statistical techniques such as the χ2 test, sum of squared errors of prediction, and residual analysis are employed to judge relative success or failure of the theoretical distributions to describe the experimental data. An extensive set of cloud droplet size distributions are measured under different aerosol injection rates. Five different aerosol injection rates are run both for size-selected aerosol particles, and six aerosol injection rates are run for broad-distribution, polydisperse aerosol particles. In relative comparison, the most favourable comparison to the measurements is the expression for stochastic condensation with size-dependent droplet removal rate. However, even this optimal distribution breaks down for broad aerosol size distributions, primarily due to deviations from the measured large-droplet tail. Lastly, a possible explanation for the deviation is the Ostwald ripening effect coupled with deactivation/activation in polluted cloud conditions.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2012

Size Distributions of Solar Flares and Solar Energetic Particle Events

We suggest that the flatter size distribution of solar energetic proton (SEP) events relative to that of flare soft X-ray (SXR) events is primarily due to the fact that SEP flares are an energetic subset of all flares. Flares associated with gradual SEP events are characteristically accompanied by fast (much > 1000 km/s) coronal mass ejections (CMEs) that drive coronal/interplanetary shock waves. For the 1996-2005 interval, the slopes (alpha values) of power-law size distributions of the peak 1-8 Angs fluxes of SXR flares associated with (a) >10 MeV SEP events (with peak fluxes much > 1 pr/sq cm/s/sr) and (b) fast CMEs were approx 1.3-1.4 compared to approx 1.2 for the peak proton fluxes of >10 MeV SEP events and approx 2 for the peak 1-8 Angs fluxes of all SXR flares. The difference of approx 0.15 between the slopes of the distributions of SEP events and SEP SXR flares is consistent with the observed variation of SEP event peak flux with SXR peak flux.

Solar Flares↗
DOE OSTI2019

Study on Magnetic Properties and Degradability of Gas Atomization Fe-Based (Fe-Si-B-P) Amorphous Powder

Fe-based amorphous materials have attracted extensive attention in the application of organic pollutant degradation due to their excellent chemical properties. In this work, a novel Fe-based (Fe-Si-B-P) amorphous powder prepared by gas atomization is employed to decompose azo dyes for wastewater treatment. Its crystalline structure, distribution of particle size, and soft magnetic properties are characterized. The experimental results show that the Fe-based (Fe-Si-B-P) powder is amorphous morphology which might bring many benefits for decomposing organics in waste water. The particle size of the micro-sized spheroidal powder distributes mainly from 10 to 50 μm, and most are about 17~19 μm. The magnetic properties are also investigated. Its saturation magnetization (M{sub S}) and coercivity (H{sub C}) are, respectively, 55 emu/g and 19.6 Oe, which present superb soft magnetic properties. Finally, we studied the degradability of the Fe-based amorphous powder by decomposing the methylene blue in waste water, and the results show that 0.05-g Fe-based amorphous powder can completely degrade the 50 ml methylene blue solution with the concentration of 3 × 10{sup −5} M within 15 min in weak acidic environment, which shows great degradability for wastewater treatment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Synthesis, structural characterization and magnetic properties of Fe/Pt core-shell nanoparticles

Structural and magnetic properties of Fe/Pt core-shell nanostructure prepared by a sequential reduction process are reported. Transmission electron microscopy shows nearly spherical particles fitting a lognormal size distribution with D{sub o} = 3.0 nm and distribution width λ{sub D} = 0.31. In x-ray diffraction, Bragg lines only from the Pt shell are clearly identified with line-widths yielding crystallite size = 3.1 nm. Measurements of magnetization M vs. T (2 K–350 K) in magnetic fields up to 90 kOe show a blocking temperature T{sub B} = 13 K below which hysteresis loops are observed with coercivity H{sub C} increasing with decreasing T reaching H{sub C} = 750 Oe at 2 K. Temperature dependence of the ac susceptibilities at frequencies f{sub m} = 10 Hz–5 kHz is measured to determine the change in T{sub B} with f{sub m} using the Vogel-Fulcher law. This analysis shows the presence of significant interparticle interaction, the Neel-Brown relaxation frequency f{sub o} = 5.3 × 10{sup 10 }Hz and anisotropy constant K{sub a} = 3.6 × 10{sup 6 }ergs/cm{sup 3}. A fit of the M vs. H data up to H = 90 kOe for T > T{sub B} to the modified Langevin function taking particle size distribution into account yields magnetic moment per particle consistent with the proposed core-shell structure; Fe core of 2.2 nm diameter and Pt shell of 0.4 nm thickness.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1974

Optical measurement of interplanetary particulates from Pioneer 10

The spatial concentration and size distribution for particulates measured in situ by the asteroid/meteoroid detector on Pioneer 10 between 1.0 and 3.5 AU are presented. The size distribution includes particles of radii from about 35 microns to 10 cm. Extrapolation from the smallest particle sizes measured shows good agreement with the results of the particle penetration detector carried on the same spacecraft. Within the uncertainties of this experiment, a single size distribution seems appropriate for all but the smallest particles measured. There is evidence for the existence of a planetary sweeping effect in the vicinity of the Mars orbit. As calculated from the particle spatial distribution, the zodiacal light brightness is found to vary approximately as the inverse square of solar distance out to about 2.25 AU and then decrease more rapidly. The absolute value of the zodiacal light brightness as calculated from the particle spatial concentration is found to be too high by a factor of 10.

Soberman, R. K.↗
NASA NTRS1994

Modeling of mineral dust in the atmosphere: Sources, transport, and optical thickness

A global three-dimensional model of the atmospheric mineral dust cycle is developed for the study of its impact on the radiative balance of the atmosphere. The model includes four size classes of minearl dust, whose source distributions are based on the distributions of vegetation, soil texture and soil moisture. Uplift and deposition are parameterized using analyzed winds and rainfall statistics that resolve high-frequency events. Dust transport in the atmosphere is simulated with the tracer transport model of the Goddard Institute for Space Studies. The simulated seasonal variations of dust concentrations show general reasonable agreement with the observed distributions, as do the size distributions at several observing sites. The discrepancies between the simulated and the observed dust concentrations point to regions of significant land surface modification. Monthly distribution of aerosol optical depths are calculated from the distribution of dust particle sizes. The maximum optical depth due to dust is 0.4-0.5 in the seasonal mean. The main uncertainties, about a factor of 3-5, in calculating optical thicknesses arise from the crude resolution of soil particle sizes, from insufficient constraint by the total dust loading in the atmosphere, and from our ignorance about adhesion, agglomeration, uplift, and size distributions of fine dust particles (less than 1 micrometer).

Tegen, Ina↗
NASA NTRS1993

Size distribution of interplanetary iron and stony particles related with deep-sea spherules

To study origin and evolution of the interplanetary dust, it is very important to investigate the size distribution. Here the changes of the size distributions of meteoroid particles due to the ablative effects during atmospheric entry were investigated by numerical computer simulation. Using the results, the pre-atmospheric size distributions of the interplanetary dust particles could be estimated from that of ablated spherules taken from deep-sea sediments. We are now analyzing deep-sea spherules from some aspects and examining if we could get any information about the interplanetary dust.

Matsuzaki, H.↗
DOE OSTI2023

A full year of aerosol size distribution data from the central Arctic under an extreme positive Arctic Oscillation: insights from the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition

Abstract. The Arctic environment is rapidly changing due to accelerated warming in the region. The warming trend is driving a decline in sea ice extent, which thereby enhances feedback loops in the surface energy budget in the Arctic. Arctic aerosols play an important role in the radiative balance and hence the climate response in the region, yet direct observations of aerosols over the Arctic Ocean are limited. In this study, we investigate the annual cycle in the aerosol particle number size distribution (PNSD), particle number concentration (PNC), and black carbon (BC) mass concentration in the central Arctic during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition. This is the first continuous, year-long data set of aerosol PNSD ever collected over the sea ice in the central Arctic Ocean. We use a k-means cluster analysis, FLEXPART simulations, and inverse modeling to evaluate seasonal patterns and the influence of different source regions on the Arctic aerosol population. Furthermore, we compare the aerosol observations to land-based sites across the Arctic, using both long-term measurements and observations during the year of the MOSAiC expedition (2019–2020), to investigate interannual variability and to give context to the aerosol characteristics from within the central Arctic. Our analysis identifies that, overall, the central Arctic exhibits typical seasonal patterns of aerosols, including anthropogenic influence from Arctic haze in winter and secondary aerosol processes in summer. The seasonal pattern corresponds to the global radiation, surface air temperature, and timing of sea ice melting/freezing, which drive changes in transport patterns and secondary aerosol processes. In winter, the Norilsk region in Russia/Siberia was the dominant source of Arctic haze signals in the PNSD and BC observations, which contributed to higher accumulation-mode PNC and BC mass concentrations in the central Arctic than at land-based observatories. We also show that the wintertime Arctic Oscillation (AO) phenomenon, which was reported to achieve a record-breaking positive phase during January–March 2020, explains the unusual timing and magnitude of Arctic haze across the Arctic region compared to longer-term observations. In summer, the aerosol PNCs of the nucleation and Aitken modes are enhanced; however, concentrations were notably lower in the central Arctic over the ice pack than at land-based sites further south. The analysis presented herein provides a current snapshot of Arctic aerosol processes in an environment that is characterized by rapid changes, which will be crucial for improving climate model predictions, understanding linkages between different environmental processes, and investigating the impacts of climate change in future Arctic aerosol studies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Techno-economic analysis comparison of comminution of wood chips using a hammer mill and a rotary shear

Preprocessing is a crucial step in the utilization of biomass feedstocks for the production of fuel and biomaterials [1]. Size reduction and drying of the material, where used, are two of the most costly and energy intensive operations that are undertaken during preprocessing, reduction of the energy usage during these two phases will reduce cost of processing and ultimately reduce the overall cost to the final user. Traditionally, a hammer mill has been the primary method used for secondary size reduction. For wet material, a hammer mill requires high amounts of energy, while for dry material the hammer mill produces a large quantity of small particles [2]. In both cases, the costs increase either from additionally needed fuel cost or from the cost of lost material. In effort to lower the cost for size reduction, a rotary shear has been developed for the comminution of biomass feedstocks. The rotary shear utilizes interlocking, rotating disk that shear the material rather than using impact to reduce the particle size of the materials. Because the material is size reduced using a cutting motion, rather than impact, the distribution of particle sizes is much narrower than produced by hammer mills.

09 BIOMASS FUELS↗
NASA NTRS2004

Mars Dust: Characterization of Particle Size and Electrostatic Charge Distributions

Some of the latest pictures of Mars surface sent by NASA s Spirit rover in early January, 2004, show very cohesive, mud-like dust layers. Significant amounts of dust clouds are present in the atmosphere of Mars. NASA spacecraft missions to Mars confirmed hypotheses from telescopic work that changes observed in the planet s surface markings are caused by wind-driven redistribution of dust. In these dust storms, particles with a wide range of diameters (< 1 m to 50 m) are a serious problem to solar cells, spacecraft, and spacesuits. Dust storms may cover the entire planet for an extended period of time. It is highly probable that the particles are charged electrostatically by triboelectrification and by UV irradiation.

Mazumder, M. K.↗
NASA NTRS2004

Mars Dust: Characterization of Particle Size and Electrostatic Charge Distribution

Some of the latest pictures of Mars surface sent by NASA's Spirit rover in early January, 2004, show very cohesive, "mud-like" dust layers. Significant amounts of dust clouds are present in the atmosphere of Mars [1-4]. NASA spacecraft missions to Mars confirmed hypotheses from telescopic work that changes observed in the planet's surface markings are caused by wind-driven redistribution of dust. In these dust storms, particles with a wide range of diameters (less than 1 micrometer to 50 micrometers) are a serious problem to solar cells, spacecraft, and spacesuits. Dust storms may cover the entire planet for an extended period of time [5]. It is highly probable that the particles are charged electrostatically by triboelectrification and by UV irradiation.

Mazumder, M. K.↗
NASA NTRS1994

A Study of the Relationship Between Anthropogenic Sulfate and Cloud Drop Nucleation

The characteristics of the cloud drop size distribution near cloud base are initially determined by the aerosol particles that serve as CCN and by the local updraft velocity. Chemical reactions of the emitted gaseous sulfur compounds due to human activities will alter, through gas-to-particle conversion, the aerosol size distribution, total number, and its chemical composition. Recently, Boucher and Rodhe and Jones et.al have each developed parameterizations relating cloud drop concentration to sulfate mass or aerosol number concentration, respectively, and used them to develop estimates of the indirect forcing by anthropogenic sulfate aerosols. THese parameterizations made use of measure relationships in continental and maritime clouds. However, these relationships are inherently noisy, yielding more than a factor of 2 variation in cloud drop concentration for a given aerosol number (or for a given sulfate mass) concentration. The large spatial and temporal variabilities in the concentration, chemical characteristics, and size distribution of aerosols have made it difficult to develop such a parameterization from data. In this paper, our focus is to develop a means for relating the predicted anthropogenic sulfate mass to cloud drop number concentration over the range of expected conditions associated with continental and marine aerosol. We start with an assumed pre-existing particle size distribution and develop an approximation of the altered distribution after addition of anthropogenic sulfate. We thereby develop a conservative estimate of the possible change in cloud drop number concentration due to anthropogenic sulfate.

Chuang, Catherine C.↗
NASA NTRS1992

Titan's aerosols. I - Laboratory investigations of shapes, size distributions, and aggregation of particles produced by UV photolysis of model Titan atmospheres

Experiments in which C2H2, C2H4, and HCN were photolyzed separately and as a mixture in UV light have been conducted in order to ascertain the physical properties of model Titan atmosphere aerosols. Aerosols formed from photolysis of C2H4 were physically similar to those formed from C2H2; protolysis of HCN rapidly generated particles that did not grow to sizes greater than 0.09 microns. While the formation of particles from C4H2 was observed within minutes, formation was slowed by a factor of 4 when C2H2 and HCN were added.

Scattergood, Thomas W.↗
DOE OSTI2013

Electroextraction of boron from boron carbide scrap

Studies were carried out to extract elemental boron from boron carbide scrap. The physicochemical nature of boron obtained through this process was examined by characterizing its chemical purity, specific surface area, size distribution of particles and X-ray crystallite size. The microstructural characteristics of the extracted boron powder were analyzed by using scanning electron microscopy and transmission electron microscopy. Raman spectroscopic examination of boron powder was also carried out to determine its crystalline form. Oxygen and carbon were found to be the major impurities in boron. Boron powder of purity ∼ 92 wt. % could be produced by the electroextraction process developed in this study. Optimized method could be used for the recovery of enriched boron ({sup 10}B > 20 at. %) from boron carbide scrap generated during the production of boron carbide. - Highlights: • Recovery of {sup 10}B from nuclear grade boron carbide scrap • Development of process flow sheet • Physicochemical characterization of electroextracted boron • Microscopic examination of electroextracted boron.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Experimental Report: Multi-Instrument Comparison of AAF Size Distribution Instruments

Aerosols are particles suspended in the atmosphere, ranging in size from nanometers to micrometers. Their size distribution affects key atmospheric processes, including nucleation, coagulation, scavenging, activation, and radiative properties (Seinfeld and Pandis 2016). Aerosol size distribution is a critical parameter in atmospheric science, influencing processes such as cloud formation and radiative forcing. Accurate representation of aerosol size distributions is essential for understanding their impact on climate, air quality, and human health. However, aerosol size and composition vary significantly across time and space due to meteorological conditions and natural or anthropogenic sources. (Wu and Boor 2021). Various instruments are used to measure aerosol size distributions, each with distinct principles, advantages, and limitations. This report begins with an in-depth overview of aerosol size-distribution comparison studies, focusing on the passive cavity aerosol spectrometer probe (PCASP), portable optical particle spectrometer (POPS), ultra-high-sensitivity aerosol spectrometer (UHSAS), aerodynamic particle sizer (APS), and scanning mobility particle sizer (SMPS). All of these instruments are used by the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) Aerial Facility (AAF), which commissioned this comparison and report. The report evaluates the strengths and weaknesses of these instruments, highlights their applications, and discusses efforts to merge data from multiple instruments for comprehensive analysis.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1973

The techniques of holographic particle sizing

Depending on the mechanism of particle production, the resultant particle size and velocity distribution may range over several orders of magnitude. In general, if particle size information is desired from a given type generator, one must resort to some form of experimental determination of the distribution. If the source of particle production is a dynamic one involving a reasonable volume, holography provides a tailor-made particle size and velocity distribution detector. This is evidenced by the fact that holography allows the entire volume to be recorded on one exposure without any interference with the volume of interest. Herein lies a very important characteristic of the holographic particle detection technique: It provides a holographic nondestructive testing technique in the fullest sense of the definition of nondestructive testing. This report provides a description of three different systems useful in this technique and includes the experimental results from one of the holographic systems which was used to detect particle size and velocity distribution from the Skylab waste tank.

Kurtz, R. L.↗
NASA NTRS1982

Small particles in plumes of Mount St. Helens

Particles in the size range 0.1-25 microns were sampled by aircraft carrying a quartz crystal microcascade in the Mount St. Helens plume on three dates in August and September 1980. Two of the sampling dates represented 'typical' emissions of the volcano between plinian eruptions. One sampling flight was made 1-4 hours before the small plinian eruption of August 7, 1980 when the plume had become discontinuous and visibly darker. The plume sampled on August 7, before the eruption, contained mainly approximately 2-micron diameter silicic glass particles, fragments of the Mount St. Helens magma. The typical plumes sampled on September 22 and August 6 had much smaller concentrations of particles, trimodal size distributions with peaks at 10, 0.4, and 0.1 microns. The particles were largely nonsilicate and apparently represented Cu-Zn oxide (10 micron peak), Al sulfate, chloride, and oxide, and sulfuric acid (smallest size peak).

Rose, W. I.↗