Search NASA⌕ Search

SEARCH · Search NASA

Results for “REACTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Effects of substrate temperature, substrate orientation, and energetic atomic collisions on the structure of GaN films grown by reactive sputtering

The combined effects of substrate temperature, substrate orientation, and energetic particle impingement on the structure of GaN films grown by reactive radio-frequency magnetron sputtering are investigated. Monte-Carlo based simulations are employed to analyze the energies of the species generated in the plasma and colliding with the growing surface. Polycrystalline films grown at temperatures ranging from 500 to 1000 °C clearly showed a dependence of orientation texture and surface morphology on substrate orientation (c- and a-plane sapphire) in which the (0001) GaN planes were parallel to the substrate surface. A large increase in interplanar spacing associated with the increase in both a- and c-parameters of the hexagonal lattice and a redshift of the optical bandgap were observed at substrate temperatures higher than 600 °C. The results showed that the tensile stresses produced during the film's growth in high-temperature deposition ranges were much larger than the expected compressive stresses caused by the difference in the thermal expansion coefficients of the film and substrate in the cool-down process after the film growth. The best films were deposited at 500 °C, 30 W and 600 °C, 45 W, which corresponds to conditions where the out diffusion from the film is low. Under these conditions the benefits of the temperature increase because of the decrease in defect density are greater than the problems caused by the strongly strained lattice that occurr at higher temperatures. The results are useful to the analysis of the growth conditions of GaN films by reactive sputtering.

36 MATERIALS SCIENCE↗

Revised Knudsen-layer reduction of fusion reactivity

Recent work by Molvig et al. [Phys. Rev. Lett. 109, 095001 (2012)] examined how fusion reactivity may be reduced from losses of fast ions in finite assemblies of fuel. In this paper, this problem is revisited with the addition of an asymptotic boundary-layer treatment of ion kinetic losses. This boundary solution, reminiscent of the classical Milne problem from linear transport theory, obtains a free-streaming limit of fast ion losses near the boundary, where the diffusion approximation is invalid. Thermonuclear reaction rates have been obtained for the ion distribution functions predicted by this improved model. It is found that while Molvig's “Knudsen distribution function” bounds from above the magnitude of the reactivity reduction, this more accurate treatment leads to less dramatic losses of tail ions and associated reduction of thermonuclear reaction rates for finite fuel volumes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Approximate photochemical dynamics of azobenzene with reactive force fields

We have fitted reactive force fields of the ReaxFF type to the ground and first excited electronic states of azobenzene, using global parameter optimization by genetic algorithms. Upon coupling with a simple energy-gap transition probability model, this setup allows for completely force-field-based simulations of photochemical cis→trans- and trans→cis-isomerizations of azobenzene, with qualitatively acceptable quantum yields. This paves the way towards large-scale dynamics simulations of molecular machines, including bond breaking and formation (via the reactive force field) as well as photochemical engines (presented in this work)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elastic properties of B-C-N films grown by N{sub 2}-reactive sputtering from boron carbide targets

Boron-carbon-nitrogen films were grown by RF reactive sputtering from a B{sub 4}C target and N{sub 2} as reactive gas. The films present phase segregation and are mechanically softer than boron carbide films (a factor of more than 2 in Young's modulus). This fact can turn out as an advantage in order to select buffer layers to better anchor boron carbide films on substrates eliminating thermally induced mechanical tensions.

36 MATERIALS SCIENCE↗

Towards a specific reaction parameter density functional for reactive scattering of H{sub 2} from Pd(111)

Recently, an implementation of the specific reaction parameter (SRP) approach to density functional theory (DFT) was used to study several reactive scattering experiments of H{sub 2} on Cu(111). It was possible to obtain chemical accuracy (1 kcal/mol ≈ 4.2 kJ/mol), and therefore, accurately model this paradigmatic example of activated H{sub 2} dissociation on a metal surface. In this work, the SRP-DFT methodology is applied to the dissociation of hydrogen on a Pd(111) surface, in order to test whether the SRP-DFT approach is also applicable to non-activated H{sub 2}-metal systems. In the calculations, the Born–Oppenheimer static surface approximations are used. A comparison to molecular beam sticking experiments, performed at incidence energies ⩾125 meV, on H{sub 2} + Pd(111) suggested the PBE-vdW [where the Perdew, Burke, and Ernzerhof (PBE) correlation is replaced by van der Waals correlation] functional as a candidate SRP density functional describing the reactive scattering of H{sub 2} on Pd(111). Unfortunately, quantum dynamics calculations are not able to reproduce the molecular beam sticking results for incidence energies <125 meV. From a comparison to initial state-resolved (degeneracy averaged) sticking probabilities it seems clear that for H{sub 2} + Pd(111) dynamic trapping and steering effects are important, and that these effects are not yet well modeled with the potential energy surfaces considered here. Applying the SRP-DFT method to systems where H{sub 2} dissociation is non-activated remains difficult. It is suggested that a density functional that yields a broader barrier distribution and has more non-activated pathways than PBE-vdW (i.e., non-activated dissociation at some sites but similarly high barriers at the high energy end of the spectrum) should allow a more accurate description of the available experiments. Finally, it is suggested that new and better characterized molecular beam sticking experiments be done on H{sub 2} + Pd(111), to facilitate the development of a more accurate theoretical description of this system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single- and bi-layer memristive devices with tunable properties using TiO{sub x} switching layers deposited by reactive sputtering

The authors systematically studied reactive sputtering deposition of TiO{sub x} thin films using a mixture of Ar and O{sub 2} gases under different ratios of O{sub 2} flow. As directly revealed by X-ray photoelectron spectroscopy, the deposition changed from a metallic Ti target mode to an oxide target mode when the O{sub 2} flow ratio was beyond 40%, resulting in TiO{sub x} thin films with different chemical compositions. Consequently, metal/oxide/metal devices with a single TiO{sub x} layer exhibited a broad spectrum of electrical characteristics such as Ohmic, rectifying, and memristive behavior. The reactive sputtering deposited TiO{sub x} thin films were also used in a bilayer memristive device structure, and a transition from bipolar to unipolar switching behavior was observed for devices based on thin films prepared with different oxygen flow.

36 MATERIALS SCIENCE↗

A MATLAB-based finite-element visualization of quantum reactive scattering. I. Collinear atom-diatom reactions

We restate the application of the finite element method to collinear triatomic reactive scattering dynamics with a novel treatment of the scattering boundary conditions. The method provides directly the reactive scattering wave function and, subsequently, the probability current density field. Visualizing these quantities provides additional insight into the quantum dynamics of simple chemical reactions beyond simplistic one-dimensional models. Application is made here to a symmetric reaction (H+H{sub 2}), a heavy-light-light reaction (F+H{sub 2}), and a heavy-light-heavy reaction (F+HCl). To accompany this article, we have written a MATLAB code which is fast, simple enough to be accessible to a wide audience, as well as generally applicable to any problem that can be mapped onto a collinear atom-diatom reaction. The code and user's manual are available for download from http://www2.chem.umd.edu/groups/alexander/FEM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A reactive flow model for heavily aluminized cyclotrimethylene-trinitramine

An accurate and reliable prediction of reactive flow is a challenging task when characterizing an energetic material subjected to an external shock impact as the detonation transition time is on the order of a micro second. The present study aims at investigating the size effect behavior of a heavily aluminized cyclotrimethylene-trinitramine (RDX) which contains 35% of aluminum by using a detonation rate model that includes ignition and growth mechanisms for shock initiation and subsequent detonation. A series of unconfined rate stick tests and two-dimensional hydrodynamic simulations are conducted to construct the size effect curve which represents the relationship between detonation velocity and inverse radius of the charge. A pressure chamber test is conducted to further validate the reactive flow model for predicting the response of a heavily aluminized high explosive subjected to an external impact.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Amorphous indium-tin-zinc oxide films deposited by magnetron sputtering with various reactive gases: Spatial distribution of thin film transistor performance

This work presents the spatial distribution of electrical characteristics of amorphous indium-tin-zinc oxide film (a-ITZO), and how they depend on the magnetron sputtering conditions using O{sub 2}, H{sub 2}O, and N{sub 2}O as the reactive gases. Experimental results show that the electrical properties of the N{sub 2}O incorporated a-ITZO film has a weak dependence on the deposition location, which cannot be explained by the bombardment effect of high energy particles, and may be attributed to the difference in the spatial distribution of both the amount and the activity of the reactive gas reaching the substrate surface. The measurement for the performance of a-ITZO thin film transistor (TFT) also suggests that the electrical performance and device uniformity of a-ITZO TFTs can be improved significantly by the N{sub 2}O introduction into the deposition process, where the field mobility reach to 30.8 cm{sup 2} V{sup –1} s{sup –1}, which is approximately two times higher than that of the amorphous indium-gallium-zinc oxide TFT.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal reactive ion etching technique involving use of self-heated cathode

In this work, the thermal reactive ion etching (TRIE) technique for etching hard-to-etch materials is presented. The TRIE technique employs a self-heated cathode and a thermally insulated aluminum plate is placed on the cathode of a regular reactive ion etching (RIE) system. By optimizing the beam size to support the sample stage, the temperature of the stage can be increased to a desired temperature without a cathode heater. The technique was used to etch a bulk titanium plate. An etch rate of 0.6 μm/min and an etch selectivity to nickel of 100 were achieved with SF{sub 6} plasma. The proposed technique makes a regular RIE system a more powerful etcher without the use of chlorine gas, a cathode heater, and an inductively coupled plasma source.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Communication: Rotational excitation of HCl by H: Rigid rotor vs. reactive approaches

We report fully quantum time-independent calculations of cross sections for the collisional excitation of HCl by H, an astrophysically relevant process. Our calculations are based on the Bian-Werner ClH{sub 2} potential energy surface and include the possibility of HCl destruction through reactive collisions. The strongest collision-induced rotational HCl transitions are those with Δj = 1, and the magnitude of the HCl-H inelastic cross sections is of the same order of magnitude as the HCl-H{sub 2} ones. Results of exact calculations, i.e., including the reactive channels, are compared to pure inelastic calculations based on the rigid rotor approximation. A very good agreement is found between the two approaches over the whole energy range 10–3000 cm{sup −1}. At the highest collisional energies, where the reaction takes place, the rigid rotor approach slightly overestimates the cross sections, as expected. Hence, the rigid rotor approach is found to be reliable at interstellar temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vapor-liquid-solid epitaxial growth of Si 1-x Ge x alloy nanowires. Composition dependence on precursor reactivity and morphology control for vertical forests

The growth of high-density group IV alloy nanowire forests is critical for exploiting their unique functionalities in many applications. Here, the compositional dependence on precursor reactivity and optimized conditions for vertical growth are studied for Si 1- x Ge x alloy nanowires grown by the vapor-liquid-solid method. The nanowire composition versus gas partial-pressure ratio for germane-silane and germane-disilane precursor combinations is obtained at 350°C over a wide composition range (0.05 ≤ x ≤ 0.98) and a generalized model to predict composition for alloy nanowires is developed based on the relative precursor partial pressures and reactivity ratio. In combination with germane, silane provides more precise compositional control at high Ge concentrations (x > 0.7), whereas disilane greatly increases the Si concentration for a given gas ratio and enables more precise alloy compositional control at small Ge concentrations (x < 0.3). Vertically oriented, non-kinking nanowire forest growth on Si (111) substrates is then discussed for silane/germane over a wide range of compositions, with temperature and precursor partial pressure optimized by monitoring the nanowire growth front using in-situ optical reflectance. For high Ge compositions (x ≈ 0.9), a “two-step” growth approach with nucleation at higher temperatures results in nanowires with high-density and uniform vertical orientation. Furthermore, increasing Si content (x ≈ 0.8), the optimal growth window is shifted to higher temperatures, which minimizes nanowire kinking morphologies. For Si-rich Si 1- x Ge x alloys (x ≈ 0.25), vertical nanowire growth is enhanced by single-step, higher-temperature growth at reduced pressures.

36 MATERIALS SCIENCE↗

Voltage equilibration for reactive atomistic simulations of electrochemical processes

We introduce electrochemical dynamics with implicit degrees of freedom (EChemDID), a model to describe electrochemical driving force in reactive molecular dynamics simulations. The method describes the equilibration of external electrochemical potentials (voltage) within metallic structures and their effect on the self-consistent partial atomic charges used in reactive molecular dynamics. An additional variable assigned to each atom denotes the local potential in its vicinity and we use fictitious, but computationally convenient, dynamics to describe its equilibration within connected metallic structures on-the-fly during the molecular dynamics simulation. This local electrostatic potential is used to dynamically modify the atomic electronegativities used to compute partial atomic changes via charge equilibration. Validation tests show that the method provides an accurate description of the electric fields generated by the applied voltage and the driving force for electrochemical reactions. We demonstrate EChemDID via simulations of the operation of electrochemical metallization cells. The simulations predict the switching of the device between a high-resistance to a low-resistance state as a conductive metallic bridge is formed and resistive currents that can be compared with experimental measurements. In addition to applications in nanoelectronics, EChemDID could be useful to model electrochemical energy conversion devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low frequency sonochemical synthesis of nanoporous amorphous manganese dioxide (MnO{sub 2}) and adsorption of remazol reactive dye

Nanoporous amorphous-MnO{sub 2} was synthesized by sonochemical process (sonication) on the solid manganese (II) acetate tetrahydrate (Mn(CH{sub 3}COO){sub 2}.4H{sub 2}O) in 0.1 M KMnO{sub 4}. The product was characterized by X-ray diffraction (XRD), morphology of the material was scanned by Field Emission Scanning Electron Microscopy (FE-SEM) and absorptions of MnO{sub 2} bonding was characterized by Fourier Transform Infra-Red Spectrometer (FT-IR). Remazol reactive dye or Red 3BS, was used in the adsorption study using nanoporous amorphous-MnO{sub 2}. In batch experiment, 10 ppm of Remazol reactive dye was used and experiment was carried out at room temperature. Adsorption of Remazol dye on 0.2g synthesized nanoporous amorphous-MnO{sub 2} showed 99 – 100% decolorization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cold and ultracold dynamics of the barrierless D{sup +} + H{sub 2} reaction: Quantum reactive calculations for ∼R{sup −4} long range interaction potentials

Quantum reactive and elastic cross sections and rate coefficients have been calculated for D{sup +} + H{sub 2} (v = 0, j = 0) collisions in the energy range from 10{sup −8} K (deep ultracold regime), where only one partial wave is open, to 150 K (Langevin regime) where many of them contribute. In systems involving ions, the ∼R{sup −4} behavior extends the interaction up to extremely long distances, requiring a special treatment. To this purpose, we have used a modified version of the hyperspherical quantum reactive scattering method, which allows the propagations up to distances of 10{sup 5} a{sub 0} needed to converge the elastic cross sections. Interpolation procedures are also proposed which may reduce the cost of exact dynamical calculations at such low energies. Calculations have been carried out on the PES by Velilla et al. [J. Chem. Phys. 129, 084307 (2008)] which accurately reproduces the long range interactions. Results on its prequel, the PES by Aguado et al. [J. Chem. Phys. 112, 1240 (2000)], are also shown in order to emphasize the significance of the inclusion of the long range interactions. The calculated reaction rate coefficient changes less than one order of magnitude in a collision energy range of ten orders of magnitude, and it is found in very good agreement with the available experimental data in the region where they exist (10-100 K). State-to-state reaction probabilities are also provided which show that for each partial wave, the distribution of HD final states remains essentially constant below 1 K.

74 ATOMIC AND MOLECULAR PHYSICS↗

Observation of a periodic runaway in the reactive Ar/O{sub 2} high power impulse magnetron sputtering discharge

This paper reports the observation of a periodic runaway of plasma to a higher density for the reactive discharge of the target material (Ti) with moderate sputter yield. Variable emission of secondary electrons, for the alternating transition of the target from metal mode to oxide mode, is understood to be the main reason for the runaway occurring periodically. Increasing the pulsing frequency can bring the target back to a metal (or suboxide) mode, and eliminate the periodic transition of the target. Therefore, a pulsing frequency interval is defined for the reactive Ar/O{sub 2} discharge in order to sustain the plasma in a runaway-free mode without exceeding the maximum power that the magnetron can tolerate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Memcapacitive characteristics in reactive-metal (Mo, Al)/HfO{sub X}/n-Si structures through migration of oxygen by applied voltage

Memcapacitive characteristics were investigated in metal-oxide-semiconductor (MOS) structure of reactive electrode (Mo, Al) and hafnium oxide (HfO{sub X}) on n-type Si substrate. The capacitance-voltage curves exhibited sequentially changing capacitance with memory function as repeating voltage sweeps, featured the memcapacitive behaviors. The saturation capacitance was decreased by repeating +V sweeps, while barely changed by −V sweeps. Also, the capacitance-time curves disclosed the same tendency. However, the MOS structure with inert Pt electrode did not show the capacitance change. The memcapacitive behaviors were induced by the migration of oxygen ions from HfO{sub X} to reactive electrodes by applied voltage, which altered the permittivity of HfO{sub X}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shock compression response of highly reactive Ni + Al multilayered thin foils

The shock-compression response of Ni + Al multilayered thin foils is investigated using laser-accelerated thin-foil plate-impact experiments over the pressure range of 2 to 11 GPa. The foils contain alternating Ni and Al layers (parallel but not flat) of nominally 50 nm bilayer spacing. The goal is to determine the equation of state and shock-induced reactivity of these highly reactive fully dense thin-foil materials. The laser-accelerated thin-foil impact set-up involved combined use of photon-doppler-velocimetry to monitor the acceleration and impact velocity of an aluminum flyer, and VISAR interferometry was used to monitor the back free-surface velocity of the impacted Ni + Al multilayered target. The shock-compression response of the Ni + Al target foils was determined using experimentally measured parameters and impedance matching approach, with error bars identified considering systematic and experimental errors. Meso-scale CTH shock simulations were performed using real imported microstructures of the cross-sections of the multilayered Ni + Al foils to compute the Hugoniot response (assuming no reaction) for correlation with their experimentally determined equation of state. It was observed that at particle velocities below ∼150 m/s, the experimentally determined equation of state trend matches the CTH-predicted inert response and is consistent with the observed unreacted state of the recovered Ni + Al target foils from this velocity regime. At higher particle velocities, the experimentally determined equation of state deviates from the CTH-predicted inert response. A complete and self-sustained reaction is also seen in targets recovered from experiments performed at these higher particle velocities. The deviation in the measured equation of state, to higher shock speeds and expanded volumes, combined with the observation of complete reaction in the recovered multilayered foils, confirmed via microstructure characterization, is indicative of the occurrence of shock-induced chemical reaction occurring in the time-scale of the high-pressure state. TEM characterization of recovered shock-compressed (unreacted) Ni + Al multilayered foils exhibits distinct features of constituent mixing revealing jetted layers and inter-mixed regions. These features were primarily observed in the proximity of the undulations present in the alternating layers of the Ni + Al starting foils, suggesting the important role of such instabilities in promoting shock-induced intermetallic-forming reactions in the fully dense highly exothermic multilayered thin foils.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗