Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Probing the Atomic-Scale Structure of Amorphous Aluminum Oxide Grown by Atomic Layer Deposition

Atomic layer deposition (ALD) is a well-established technique for depositing nanoscale coatings with pristine control of film thickness and composition. The trimethylaluminum (TMA) and water (H 2 O) ALD chemistry is inarguably the most widely used and yet to date, we have little information about the atomic-scale structure of the amorphous aluminum oxide (AlO x ) formed by this chemistry. This lack of understanding hinders our ability to establish process-structure-property relationships and ultimately limits technological advancements employing AlOx made via ALD. In this work, we employ synchrotron high-energy X-ray diffraction (HE-XRD) coupled with pair distribution function (PDF) analysis to characterize the atomic structure of amorphous AlO x ALD coatings. We combine ex situ and in operando HE-XRD measurements on ALD AlO x and fit these experimental data using stochastic structural modeling to reveal variations in the Al-O bond length, Al and O coordination environment, and extent of Al vacancies as a function of growth conditions. In particular, the local atomic structure of ALD AlO x is found to change with the substrate and number of ALD cycles. The observed trends are consistent with the formation of bulk Al 2 O 3 surrounded by an O-rich surface layer. We deconvolute these data to reveal atomic-scale structural information for both the bulk and surface phases. Overall, this work demonstrates the usefulness of HE-XRD and PDF analysis in improving our understanding of the structure of amorphous ALD thin films and provides a pathway to evaluate how process changes impact the structure and properties of ALD films.

36 MATERIALS SCIENCE↗

Structural phase transitions in a MoWSe 2 monolayer: Molecular dynamics simulations and variational autoencoder analysis

Electrical and optoelectronic properties of two-dimensional (2D) transition metal dichalcogenides (TMDCs) can be tuned by exploiting their structural phase transitions. Here semiconducting (2H) to metallic (1T) phase transition is investigated in a strained MoWSe 2 monolayer using molecular dynamics (MD) simulations. Novel intermediate structures called α and β are found between the 2H and 1T phases. These intermediate structures are similar to those observed in a 2D MoS 2 by scanning transmission electron microscopy. Here, a deep generative model, namely the variational autoencoder (VAE) trained by MD data, is used to generate novel heterostructures with α and β interfaces. Quantum simulations based on density functional theory show that these heterostructures are stable and suitable for novel nanoelectronics applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strong influence of nonmagnetic ligands on the momentum-dependent spin splitting in antiferromagnets

Here, recent studies show the nonrelativistic antiferromagnetic ordering could generate momentum-dependent spin splitting analogous to the Rashba effect but free from the requirement of relativistic spin-orbit coupling. Whereas the classification of such compounds can be illustrated by different spin-splitting prototypes (SSTs) from symmetry analysis and density-functional-theory calculations, the huge variation in chemical bonding and structures of these diverse compounds possibly clouds the issue of how much of the variation in spin splitting can be traced back to the symmetry-defined characteristics, rather to the underlining chemical and structural diversity. The alternative model Hamiltonian approaches do not confront the issues of chemical and structural complexity but often consider only the magnetic sublattice, dealing with the all-important effects of the nonmagnetic ligands via renormalizing the interactions between the magnetic sites. To this end, we constructed a DFT model Hamiltonian that allows us to study SSTs at constant chemistry while retaining the realistic atomic-scale structure including ligands. This is accomplished by using a single, universal magnetic skeletal lattice (Ni 2+ ions in rocksalt NiO) and designing small displacements of the nonmagnetic (oxygen) sublattice which produce, by design, the different SST magnetic symmetries. We show that (i) even similar crystal structures having very similar band structures can lead to contrasting behavior of spin splitting vs momentum, and (ii) even subtle deformations of the nonmagnetic ligand sublattice could cause a giant spin splitting in AFM-induced SST. This is a paradigm shift relative to the convention of modeling magnets without considering the nonmagnetic ligand that mediates indirect magnetic interaction (e.g., superexchange).

36 MATERIALS SCIENCE↗

Sources of Geomagnetic Activity during Nearly Three Solar Cycles (1972-2000)

We examine the contributions of the principal solar wind components (corotating highspeed streams, slow solar wind, and transient structures, i.e., interplanetary coronal mass ejections (CMEs), shocks, and postshock flows) to averages of the aa geomagnetic index and the interplanetary magnetic field (IMF) strength in 1972-2000 during nearly three solar cycles. A prime motivation is to understand the influence of solar cycle variations in solar wind structure on long-term (e.g., approximately annual) averages of these parameters. We show that high-speed streams account for approximately two-thirds of long-term aa averages at solar minimum, while at solar maximum, structures associated with transients make the largest contribution (approx. 50%), though contributions from streams and slow solar wind continue to be present. Similarly, high-speed streams are the principal contributor (approx. 55%) to solar minimum averages of the IMF, while transient-related structures are the leading contributor (approx. 40%) at solar maximum. These differences between solar maximum and minimum reflect the changing structure of the near-ecliptic solar wind during the solar cycle. For minimum periods, the Earth is embedded in high-speed streams approx. 55% of the time versus approx. 35% for slow solar wind and approx. 10% for CME-associated structures, while at solar maximum, typical percentages are as follows: high-speed streams approx. 35%, slow solar wind approx. 30%, and CME-associated approx. 35%. These compositions show little cycle-to-cycle variation, at least for the interval considered in this paper. Despite the change in the occurrences of different types of solar wind over the solar cycle (and less significant changes from cycle to cycle), overall, variations in the averages of the aa index and IMF closely follow those in corotating streams. Considering solar cycle averages, we show that high-speed streams account for approx. 44%, approx. 48%, and approx. 40% of the solar wind composition, aa, and the IMF strength, respectively, with corresponding figures of approx. 22%, approx. 32%, and approx. 25% for CME-related structures, and approx. 33%, approx. 19%, and approx. 33% for slow solar wind.

Richardson, I. G.↗

Diurnal variation of the Jovian ionosphere

The time-dependent structure of the Jovian ionosphere is examined. Diurnal variation of appreciable magnitude is revealed in the lower ionosphere. The upper ionosphere remains more or less intact at nighttime, as in the case of the earth's ionosphere. There is considerable difference in the height-integrated electrical conductivities on the day and night sides.

Tan, A.↗

Ion Mobility Measurements of Multianionic Metalloporphyrin Dimers: Structural Changes Induced by Countercation Exchange

We present gas-phase structures of dimers of Mn{sup III} and Fe{sup III} meso-tetra(4-sulfonatophenyl)porphyrin multianions with various amounts of sodium and hydrogen counterions. The structural assignments are achieved by combining mass spectrometry, ion mobility measurements, quantum chemical calculations, and trajectory method collision cross section calculations. For a common charge state, we observe significant topological variations in the dimer structures of [(MTPPS){sub 2}+nX]{sup (6-n)-} (M=Mn{sup III}, Fe{sup III}; X=H, Na; n = 1–3) induced by replacing hydrogen counterions by sodium. For sodium, the dimer structures are much more compact, a finding that can be rationalized by the stronger interactions of the sodium cations with the anionic sulfonic acid groups of the porphyrins as compared to hydrogen. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Tunable metal-insulator transition in Nd{sub 1−x}Y{sub x}NiO{sub 3} (x = 0.3, 0.4) perovskites thin film at near room temperature

Metal-insulator transition (MIT) occurs due to the charge disproportionation and lattice distortions in rare-earth nickelates. Existing studies revealed that the MIT behavior of rare-earth nickelates is fairly sensitive to external stress/pressure, suggesting a viable route for MIT strain engineering. Unlike applying extrinsic strain, the MIT can also be modulated by through rare-earth cation mixing, which can be viewed as intrinsic quantum stress. We choose Nd{sub 1−X}Y{sub X}NiO{sub 3} (x = 0.3, 0.4) perovskites thin films as a prototype system to exhibit the tunable sharp MIT at near room temperature. By adjusting Y concentration, the transition temperature of the thin films can be changed within the range of 340–360 K. X-ray diffraction, X-ray absorption fine structure (XAFS), and in situ infrared spectroscopy are employed to probe the structural and optical property variation affected by composition and temperature. The infrared transmission intensity decreases with temperature across the MIT, indicating a pronounced thermochromic effect. Meanwhile, the XAFS result exhibits that the crystal atomistic structure changes accompanying with the Y atoms incorporation and MIT phase transition. The heavily doped Y atoms result in the pre-edge peak descent and Ni-O bond elongation, suggesting an enhanced charge disproportionation effect and the weakening of hybridization between Ni-3d and O-2p orbits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Noise power spectrum of the fixed pattern noise in digital radiography detectors

Purpose: The fixed pattern noise in radiography image detectors is caused by various sources. Multiple readout circuits with gate drivers and charge amplifiers are used to efficiently acquire the pixel voltage signals. However, the multiple circuits are not identical and thus yield nonuniform system gains. Nonuniform sensitivities are also produced from local variations in the charge collection elements. Furthermore, in phosphor-based detectors, the optical scattering at the top surface of the columnar CsI growth, the grain boundaries, and the disorder structure causes spatial sensitivity variations. These nonuniform gains or sensitivities cause fixed pattern noise and degrade the detector performance, even though the noise problem can be partially alleviated by using gain correction techniques. Hence, in order to develop good detectors, comparative analysis of the energy spectrum of the fixed pattern noise is important. Methods: In order to observe the energy spectrum of the fixed pattern noise, a normalized noise power spectrum (NNPS) of the fixed pattern noise is considered in this paper. Since the fixed pattern noise is mainly caused by the nonuniform gains, we call the spectrum the gain NNPS. We first asymptotically observe the gain NNPS and then formulate two relationships to calculate the gain NNPS based on a nonuniform-gain model. Since the gain NNPS values are quite low compared to the usual NNPS, measuring such a low NNPS value is difficult. By using the average of the uniform exposure images, a robust measuring method for the gain NNPS is proposed in this paper. Results: By using the proposed measuring method, the gain NNPS curves of several prototypes of general radiography and mammography detectors were measured to analyze their fixed pattern noise properties. We notice that a direct detector, which is based on the a-Se photoconductor, showed lower gain NNPS than the indirect-detector case, which is based on the CsI scintillator. By comparing the gain NNPS curves of the indirect detectors, we could analyze the scintillator properties depending on the techniques for the scintillator surface processing. Conclusions: A robust measuring method for the NNPS of the fixed pattern noise of a radiography detector is proposed in this paper. The method can measure a stable gain NNPS curve, even though the fixed pattern noise level is quite low. From the measured gain NNPS curves, we can compare and analyze the detector properties in terms of producing the fixed pattern noise.

60 APPLIED LIFE SCIENCES↗

The solar wind between 0.7 AU and 5.0 AU

A review is given of Pioneer-9 (1968, 1969) and Pioneer-10 and 11 (1973) observations of the solar wind high-speed stream structure as a function of heliocentric distance. Evidence for spatial and temporal variations in this solar wind structure between 5 and 7 AU is presented as well as evidence for the importance of stream-stream interactions in the solar wind. As the high speed stream structure travels outward in the ecliptic plane from the sun, there is evidence of damping which is consistent with the exchange of momentum between the high speed streams and the low speed streams. These interactions may produce scattering centers which will prevent the observation of a significant galactic cosmic ray gradient. The width of the solar wind speed histograms are determined and radial distances on the order of 10 AU are calculated.

Intriligator, D. S.↗

Structure–performance relationships of lithium-ion battery cathodes revealed by contrast-variation small-angle neutron scattering

Lithium-ion battery cathodes are porous composites of active material, conductive carbon, and polymer binder. Controlling the cathode microstructure is key to achieving high energy density and cycling stability. Current characterization techniques lack the nanoscale resolution over representative volumes necessary to relate cathode microstructure to cycling performance. To address this challenge, we utilize contrast-variation small-angle neutron scattering to quantify the chemical and structural features of cathodes wet by dimethyl carbonate, representing a relevant solvent environment. Using neutron scattering measurements, we identify an expansion in carbon and polymer structures that arises after calendering and wetting with solvent. Further, we deconvolute the carbon and binder phases to obtain the solvent-accessible carbon black surface area, which we correlate to diminished capacity retention driven by electrolyte decomposition on exposed carbon. This technique provides nanoscale insight into composite cathode microstructures and resulting cycling performance, promising future applications to a broad range of porous materials that exist in energy storage systems.

25 ENERGY STORAGE↗

Microenvironment control of porphyrin binding, organization, and function in peptide nanofiber assemblies

To take peptide materials from predominantly structural to functional assemblies, variations in cofactor binding sites must be engineered and controlled. Here, we have employed the peptide sequence c16-AHX 3 K 3 -CO 2 H where X 3 represents the aliphatic structural component of the peptide design that dictates β-sheet formation and upon self-assembly yields a change in the overall microenvironment surrounding the Zn protoporphyrin IX ((PPIX)Zn) binding site. All peptides studied yield β-sheet rich nanofibers highlighting the materials’ resiliency to amino acid substitution. We highlight that the (PPIX)Zn binding constants correlate strongly with amino acid side chain volume, where X = L or I yields the lowest dissociation constant values (K D ). The resulting microenvironment highlights the materials’ ability to control interchromophore electronic interactions such that slip-stacked cofacial arrangements are observed via exciton splitting in UV/visible and circular dichroism spectroscopy. Steady state and time-resolved photoluminescence suggests that greater interchromophore packing yields larger excimer populations and corresponding longer excimer association lifetimes (τ A ) which directly translates to shorter exciton diffusion lengths. In comparison to synthetic porphyrin molecular assemblies, this work demonstrates the ability to employ the peptide assembly to modulate the degree of cofactor arrangement, extent of excimer formation, and the exciton hopping rates all while in a platform amenable for producing polymer-like material

14 SOLAR ENERGY↗

Competing bounds on the present-day time variation of fundamental constants

We compare the sensitivity of a recent bound on time variation of the fine structure constant from optical clocks with bounds on time-varying fundamental constants from atomic clocks sensitive to the electron-to-proton mass ratio, from radioactive decay rates in meteorites, and from the Oklo natural reactor. Tests of the weak equivalence principle also lead to comparable bounds on present variations of constants. The 'winner in sensitivity' depends on what relations exist between the variations of different couplings in the standard model of particle physics, which may arise from the unification of gauge interactions. Weak equivalence principle tests are currently the most sensitive within unified scenarios. A detection of time variation in atomic clocks would favor dynamical dark energy and put strong constraints on the dynamics of a cosmological scalar field.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Carbon (1s) NEXAFS Spectroscopy of Biogeochemically Relevant Reference Organic Compounds

Natural organic matter (NOM) is a highly active component of soils and sediments, and plays an important role in global C cycling. However, NOM has defied molecular-level structural characterization, owing to variations along the decomposition continuum and its existence as highly functionalized polyelectrolytes. We conducted a comprehensive systematic overview of spectral signatures and peak positions of major organic molecules that occur as part of NOM using near-edge x-ray absorption fine structure (NEXAFS) spectroscopy. This investigation provides a more comprehensive NEXAFS spectral library of biogeochemically relevant organic C compounds. The spectra of these reference organic compounds reveal distinct spectral features and peak positions at the C K-edge that are characteristic of the molecular orbitals bonding C atoms. Detailed structural information can be derived from these distinctive spectral features that could be used to build robust peak assignment criteria to exploit the chemical sensitivity of NEXAFS spectroscopy for in situ molecular-level spatial investigation and fingerprinting of complex organic C compounds in environmental samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ion-beam assisted sputtering of titanium nitride thin films

Abstract Titanium nitride is a material of interest for many superconducting devices such as nanowire microwave resonators and photon detectors. Thus, controlling the growth of TiN thin films with desirable properties is of high importance. This work aims to explore effects in ion beam-assisted sputtering (IBAS), were an observed increase in nominal critical temperature and upper critical fields are in tandem with previous work on Niobium nitride (NbN). We grow thin films of titanium nitride by both, the conventional method of DC reactive magnetron sputtering and the IBAS method, to compare their superconducting critical temperatures $$T_{c}$$ T c as functions of thickness, sheet resistance, and nitrogen flow rate. We perform electrical and structural characterizations by electric transport and x-ray diffraction measurements. Compared to the conventional method of reactive sputtering, the IBAS technique has demonstrated a 10% increase in nominal critical temperature without noticeable variation in the lattice structure. Additionally, we explore the behavior of superconducting $$T_c$$ T c in ultra-thin films. Trends in films grown at high nitrogen concentrations follow predictions of mean-field theory in disordered films and show suppression of superconducting $$T_c$$ T c due to geometric effects, while nitride films grown at low nitrogen concentrations strongly deviate from the theoretical models.

36 MATERIALS SCIENCE↗

Deposition and characterization of ZnO/NiO thin films

In this work, p-n heterojunctions based on p-NiO and n-ZnO composite nanostructures were successfully deposited by sol-gel spin coating method. Structural investigations indicate well aligned ZnO nanorods with hexagonal faces having a preferential orientation along the c-axis (002). Scanning electron microscopy (SEM) was used to characterize, the p-n heterostructures formed grain like spherical structure of NiO fully covered the hexagonal rods of ZnO in the NiO/ZnO thin film and elements were confirmed from EDX analysis. PL and micro-Raman spectra of the deposited films showed the variation in luminescence and structural properties due to the formation of heterojuction of NiO.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nondestructive Evaluation of Advanced Materials with X-ray Phase Mapping

X-ray radiation has been widely used for imaging applications since Rontgen first discovered X-rays over a century ago. Its large penetration depth makes it ideal for the nondestructive visualization of the internal structure and/or defects of materials unobtainable otherwise. Currently used nondestructive evaluation (NDE) tools, X-ray radiography and tomography, are absorption-based, and work well in heavy-element materials where density or composition variations due to internal structure or defects are high enough to produce appreciable absorption contrast. However, in many cases where materials are light-weight and/or composites that have similar mass absorption coefficients, the conventional absorption-based X-ray methods for NDE become less useful. Indeed, the light-weight and ultra-high-strength requirements for the most advanced materials used or developed for current flight mission and future space exploration pose a great challenge to the standard NDE tools in that the absorption contrast arising from the internal structure of these materials is often too weak to be resolved. In this presentation, a solution to the problem, the use of phase information of X-rays for phase contrast X-ray imaging, will be discussed, along with a comparison between the absorption-based and phase-contrast imaging methods. Latest results on phase contrast X-ray imaging of lightweight Space Shuttle foam in 2D and 3D will be presented, demonstrating new opportunities to solve the challenging issues encountered in advanced materials development and processing.

Hu, Zhengwei↗

Phase Contrast X-ray Imaging of Shuttle Insulating Foam

X-ray radiation has been widely used for imaging applications since Rontgen first discovered X-rays over a century ago. Its large penetration depth makes it ideal for the nondestructive visualization of internal structure of materials or objects unobtainable otherwise. Currently widely used nondestructive evaluation (NDE) tools-X-ray radiography and tomography are absorption-based, and work well in highly absorbing materials where density or composition variations due to internal structure or defects are high enough to be spatially distinguished in terms of absorption contrast. However, in many cases where materials such as insulating foam are light-weight, the conventional absorption-based X-ray methods for NDE become less effective. Indeed, the low-density shuttle insulating foam used for flight mission poses a great challenge to the standard NDE tools in that the absorption contrast arising from internal defects of such a low- density material is either weak or indistinguishable. In this presentation, the latest progress in phase contrast X-ray imaging of internal defects of insulating foam will be presented and discussed, demonstrating new opportunities to solve challenging issues involved in advanced materials development and processing for space exploration.

Hu, Zhengwei↗