Search NASA⌕ Search

SEARCH · Search NASA

Results for “TIME DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Time‐Dependent Cation Selectivity of Titanium Carbide MXene in Aqueous Solution

Abstract Electrochemical ion separation is a promising technology to recover valuable ionic species from water. Pseudocapacitive materials, especially 2D materials, are up‐and‐coming electrodes for electrochemical ion separation. For implementation, it is essential to understand the interplay of the intrinsic preference of a specific ion (by charge/size), kinetic ion preference (by mobility), and crystal structure changes. Ti 3 C 2 T z MXene is chosen here to investigate its selective behavior toward alkali and alkaline earth cations. Utilizing an online inductively coupled plasma system, it is found that Ti 3 C 2 T z shows a time‐dependent selectivity feature. In the early stage of charging (up to about 50 min), K + is preferred, while ultimately Ca 2+ and Mg 2+ uptake dominate; this unique phenomenon is related to dehydration energy barriers and the ion exchange effect between divalent and monovalent cations. Given the wide variety of MXenes, this work opens the door to a new avenue where selective ion‐separation with MXene can be further engineered and optimized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preliminary Results for the OECD/NEA Time Dependent Benchmark using Rattlesnake, Rattlesnake-IQS and TDKENO

One goal of the MAMMOTH M&S project is to validate the analysis capabilities within MAMMOTH. Historical data has shown limited value for validation of full three-dimensional (3D) multi-physics methods. Initial analysis considered the TREAT startup minimum critical core and one of the startup transient tests. At present, validation is focusing on measurements taken during the M8CAL test calibration series. These exercises will valuable in preliminary assessment of the ability of MAMMOTH to perform coupled multi-physics calculations; calculations performed to date are being used to validate the neutron transport solver Rattlesnake\cite{Rattlesnake} and the fuels performance code BISON. Other validation projects outside of TREAT are available for single-physics benchmarking. Because the transient solution capability of Rattlesnake is one of the key attributes that makes it unique for TREAT transient simulations, validation of the transient solution of Rattlesnake using other time dependent kinetics benchmarks has considerable value. The Nuclear Energy Agency (NEA) of the Organization for Economic Cooperation and Development (OECD) has recently developed a computational benchmark for transient simulations. This benchmark considered both two-dimensional (2D) and 3D configurations for a total number of 26 different transients. All are negative reactivity insertions, typically returning to the critical state after some time.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Tree tensor network hierarchical equations of motion based on time-dependent variational principle for efficient open quantum dynamics in structured thermal environments

In this work, we introduce an efficient method, TTN-HEOM, for exactly calculating the open quantum dynamics for driven quantum systems interacting with highly structured bosonic baths by combining the tree tensor network (TTN) decomposition scheme with the bexcitonic generalization of the numerically exact hierarchical equations of motion (HEOM). The method yields a series of quantum master equations for all core tensors in the TTN that efficiently and accurately capture the open quantum dynamics for non-Markovian environments to all orders in the system–bath interaction. These master equations are constructed based on the time-dependent Dirac–Frenkel variational principle, which isolates the optimal dynamics for the core tensors given the TTN ansatz. The dynamics converges to the HEOM when increasing the rank of the core tensors, a limit in which the TTN ansatz becomes exact. We introduce TENSO, tensor equations for non-Markovian structured open systems, as a general-purpose Python code to propagate the TTN-HEOM dynamics. We implement three general propagators for the coupled master equations: two fixed-rank methods that require a constant memory footprint during the dynamics and one adaptive-rank method with a variable memory footprint controlled by the target level of computational error. We exemplify the utility of these methods by simulating a two-level system coupled to a structured bath containing one Drude–Lorentz component and eight Brownian oscillators, which is beyond what can presently be computed using the standard HEOM. Our results show that the TTN-HEOM is capable of simulating both dephasing and relaxation dynamics of driven quantum systems interacting with structured baths, even those of chemical complexity, with an affordable computational cost.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamical level-crossing model for the time-dependent electron emission from dielectric surfaces in symmetric dielectric barrier discharges

In field emission plasmas, electrons that initiate plasma formation come from the surface of a metallic electrode, or wall, with emission controlled by the electron-work function of the wall, and can be computed via the Fowler-Nordheim formula. Impinging ions modify the rate at which electrons leave the surface, and are accounted via the coefficient of secondary electron emission. However, in the case of dielectric surfaces, the microscopic mechanism by which electrons are emitted is not as well understood. While simulations of dielectric barrier discharge plasmas assume an initial density of electrons in a time-dependent simulation, whether the presence of electrons is a necessary ambient condition or whether it is a result of emission from a surface is not clear. This is particularly relevant in the context of micro and nanoscale plasma generators when surface-related effects become more important. Here we consider electron emission from dielectric surfaces in the context of dielectric barrier discharges. The configuration of interest consists of two parallel-plate metallic electrodes, each covered by a dielectric layer. Assuming that the initial electrons for plasma formation arise from the surface, we compute the rate of charge transfer from surfaces, which is a necessary, but not sufficient, condition for plasma formation. This paper presents the application of the theory of nonadiabatic transitions (dynamical level crossing) to the problem of electron emission from dielectric surfaces in dielectric barrier discharges. Furthermore, the microscopic model of electron transfer described here has potential applications in the design of micro and nanoscale plasma generators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A one-dimensional time-dependent model for studying oxide film growth on metallic surfaces

Corrosion resistance of industrial metals and alloys is largely imparted by the formation of a stable oxide film on the surface that kinetically limits the process of corrosion. Developing a fundamental knowledge of the processes involved in the oxide layer formation and growth is thus important for designing corrosion-resistant alloys. In this work, a model for oxide growth tracking two species (the oxygen and metal vacancies) was presented. The model accounted for species transport and interfacial chemistry. The potential profile was obtained by solving the Poisson equation without needing to invoke the typical linear assumption. Moreover, the fully time-dependent concentration and potential profiles were obtained and the oxide thickness was allowed to evolve by allowing the movement of the domain boundaries at either end. The results were analyzed and the effects of different parameters on the model were discussed.

36 MATERIALS SCIENCE↗

Monitoring of Time-Dependent System Profiles by Multiplex Gas Chromatography with Maximum Entropy Demodulation

The maximum entropy technique was successfully applied to the deconvolution of overlapped chromatographic peaks. An algorithm was written in which the chromatogram was represented as a vector of sample concentrations multiplied by a peak shape matrix. Simulation results demonstrated that there is a trade off between the detector noise and peak resolution in the sense that an increase of the noise level reduced the peak separation that could be recovered by the maximum entropy method. Real data originated from a sample storage column was also deconvoluted using maximum entropy. Deconvolution is useful in this type of system because the conservation of time dependent profiles depends on the band spreading processes in the chromatographic column, which might smooth out the finer details in the concentration profile. The method was also applied to the deconvolution of previously interpretted Pioneer Venus chromatograms. It was found in this case that the correct choice of peak shape function was critical to the sensitivity of maximum entropy in the reconstruction of these chromatograms.

Becker, Joseph F.↗

Time-dependent imaging of space-charge dominated electron beams

When considered as non-neutral plasmas, space-charge dominated charged particle beams have significantly smaller Debye lengths than their beam sizes. Therefore, collective effects due to space-charge forces are very important to the beam dynamics. As an example, density perturbations generated in a space-charge dominated charge particle beam will stimulate longitudinally space-charge waves. To study the modification of transverse beam distributions by longitudinal beam dynamics, experimental studies of low-energy electron beams, with and without longitudinal density perturbations, have been undertaken at the University of Maryland's electron ring and the Long Solenoid Experiment (LSE). We have taken time-resolved beam images on these machines using two different diagnostics: Optical transition radiation, produced from an intercepting aluminized silicon screen, and a fast (<3 ns decay time) phosphor screen. Results from both techniques show that both the transverse size and transverse particle distribution of a space-charge dominated beam are affected by the longitudinal dynamics of the beam. In addition to the fast imaging measurements, longitudinal mean energy profiles of different beams have also been measured at different locations in the LSE system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Driving self-assembly and emergent dynamics in colloidal suspensions by time-dependent magnetic fields

In this review we discuss recent research on driving self assembly of magnetic particle suspensions subjected to alternating magnetic fields. The variety of structures and effects that can be induced in such systems is remarkably broad due to the large number of variables involved. The alternating field can be uniaxial, biaxial or triaxial, the particles can be spherical or anisometric, and the suspension can be dispersed throughout a volume or confined to a soft interface. In the simplest case the field drives the static or quasi-static assembly of unusual particle structures, such as sheets, networks and open-cell foams. More complex, emergent collective behaviors evolve in systems that can follow the time-dependent field vector. In these cases energy is continuously injected into the system and striking °ow patterns and structures can arise. In fluid volumes these include the formation of advection and vortex lattices. At air-liquid and liquid-liquid interfaces striking dynamic particle assemblies emerge due to the particle-mediated coupling of the applied field to surface excitations. These out-of-equilibrium interface assemblies exhibit a number of remarkable phenomena, including self-propulsion and surface mixing. In addition to discussing various methods of driven self assembly in magnetic suspensions, some of the remarkable properties of these novel materials are described.

36 MATERIALS SCIENCE↗

A time dependent anatomically detailed model of cardiac conduction

In order to understand the determinants of transitions in cardiac electrical activity from normal patterns to dysrhythmias such as ventricular fibrillation, we are constructing an anatomically and physiologically detailed finite element simulation of myocardial electrical propagation. A healthy human heart embedded in paraffin was sectioned to provide a detailed anatomical substrate for model calculations. The simulation of propagation includes anisotropy in conduction velocity due to fiber orientation as well as gradients in conduction velocities, absolute and relative refractory periods, action potential duration and electrotonic influence of nearest neighbors. The model also includes changes in the behaviour of myocardial tissue as a function of the past local activity. With this model, we can examine the significance of fiber orientation and time dependence of local propagation parameters on dysrhythmogenesis.

Computer Simulation↗

Time-dependent scenario modeling for the ST-E1 fusion power plant

ST-E1 is a low aspect ratio fusion power plant being designed by Tokamak Energy targeting 1.5 GW of fusion power. Characterization of the ST-E1 flat-top scenario is described elsewhere McNamara et al (2026 Nucl. Fusion 66 086008); here we focus on addressing the question of how to ramp-up the ST-E1 plasma from an initial state following breakdown and flux-surface formation to the target flat-top state. Being low-aspect ratio, the available solenoid flux of ST-E1 is limited. Therefore, particular consideration is placed on developing ramp-up scenarios that predominantly use inductive flux provided by external vertical field coils. Through time-dependent modeling with METIS, we show that this is possible when the ramp-up is performed at relatively high plasma density: although auxiliary current drive efficiency is reduced, this is significantly outweighed by (1) higher electron-ion collisional equilibration, (2) higher fusion power once ions become sufficiently hot, (3) higher poloidal beta for increased vertical-field flux, and (4) potentially favorable exhaust compatibilities. Ultimately, we show the target ST-E1 flat-top performance can be reached after a ramp-up period lasting 150 s using less than 40 Vs of solenoid flux (with vertical field providing ∼ 90 Vs of flux). The sensitivity to model assumptions are presented, with the general observation that deleterious effects can be mitigated through minor alterations of the auxiliary power temporal waveform and/or total auxiliary power level. The impact of a solenoid and the auxiliary power mix (electron cyclotron heating only versus electron and ion cyclotron heating) on the ST-E1 ramp-up success are also discussed in appendices. On this latter topic, we show that the effect of direct-ion heating during ramp-up is obscured by the uncertainty in the pedestal dynamics, identifying a clear line of future work required to make a definite decision on the ST-E1 auxiliary power mix.

current ramp-up↗

Time-dependent behavioral data from zebrafish reveals novel signatures of chemical toxicity using point of departure analysis

High-content imaging of embryonic zebrafish behavior can be used as a screening approach to rapidly evaluate the relative potential for chemicals to cause toxicity. However, most statistical methods applied to these data so far transform movement values to incidence-based “hits” and calculate lowest effect levels (LELs), which loses individual fish resolution of behavior and defies hazard ranking due to reliance on applied dose levels. Here, we have developed and parallelized a workflow to calculate benchmark dose (BMD) values from dynamic, high-content zebrafish behavior data that scales for high-throughput chemical screening. To appropriately capture the dynamics of zebrafish response from light to dark stimulus, we summarized time-dependent data using both area under the curve and immediate change at the transition point into two novel metrics that characterized abnormal behavior as a function of chemical concentration. The BMD workflow was applied to calculate BMD 10 values of 1,060 ToxCast chemicals for 24 zebrafish endpoints, including behavior, mortality and morphology. The BMD 10 values provided better precision and separation than LELs for clustering chemicals since they were derived from models that best-fit their concentration-response curves. Clustering analysis revealed behavioral signatures as the most sensitive endpoints. High concordance in chemical activity was observed between ToxCast assays and zebrafish behavioral endpoints, however ToxPi analysis indicated that rankings based on in vitro data was not a reliable predictor of in vivo rankings for lower potency chemicals. The methods developed in this work will enable the use of high-content zebrafish behavioral screening data for BMD analysis in toxicological hazard assessment.

59 BASIC BIOLOGICAL SCIENCES↗

Time dependency of temperature of a laser-irradiated infrared target pixel as a low-pass filter

The thermal response of a surface layer of a pixel on an infrared target simulator is discussed. This pixel is maintained at a constant temperature by a rapidly scanning laser beam. An analytical model has been developed to describe the exact temperature dependence of a pixel as a function of time for different pixel refresh rates. The top layer of the pixel surface that generates the gray-body radiation shows the temperature dependence on time that is characteristic of a low-pass filter. The experimental results agree with the analytical predictions. The application of a pulsed laser beam to a noncontact, nondestructive diagnostic technique of surface characterization for the presence of microdefects is discussed.

Scholl, Marija S.↗

Comparative RNA-Seq transcriptome analyses reveal dynamic time-dependent effects of 56 Fe, 16 O, and 28 Si irradiation on the induction of murine hepatocellular carcinoma

One of the health risks posed to astronauts during deep space flights is exposure to high charge, high-energy (HZE) ions (Z > 13), which can lead to the induction of hepatocellular carcinoma (HCC). However, little is known on the molecular mechanisms of HZE irradiation-induced HCC. We performed comparative RNA-Seq transcriptomic analyses to assess the carcinogenic effects of 600 MeV/n 56 Fe (0.2 Gy), 1 GeV/n 16 O (0.2 Gy), and 350 MeV/n 28 Si (0.2 Gy) ions in a mouse model for irradiation-induced HCC. C3H/HeNCrl mice were subjected to total body irradiation to simulate space environment HZE-irradiation, and liver tissues were extracted at five different time points post-irradiation to investigate the time-dependent carcinogenic response at the transcriptomic level. Our data demonstrated a clear difference in the biological effects of these HZE ions, particularly immunological, such as Acute Phase Response Signaling, B Cell Receptor Signaling, IL-8 Signaling, and ROS Production in Macrophages. Also seen in this study were novel unannotated transcripts that were significantly affected by HZE. To investigate the biological functions of these novel transcripts, we used a machine learning technique known as self-organizing maps (SOMs) to characterize the transcriptome expression profiles of 60 samples (45 HZE-irradiated, 15 non-irradiated control) from liver tissues. A handful of localized modules in the maps emerged as groups of co-regulated and co-expressed transcripts. The functional context of these modules was discovered using overrepresentation analysis. We found that these spots typically contained enriched populations of transcripts related to specific immunological molecular processes (e.g., Acute Phase Response Signaling, B Cell Receptor Signaling, IL-3 Signaling), and RNA Transcription/Expression. A large number of transcripts were found differentially expressed post-HZE irradiation. These results provide valuable information for uncovering the differences in molecular mechanisms underlying HZE specific induced HCC carcinogenesis. Additionally, a handful of novel differentially expressed unannotated transcripts were discovered for each HZE ion. Taken together, these findings may provide a better understanding of biological mechanisms underlying risks for HCC after HZE irradiation and may also have important implications for the discovery of potential countermeasures against and identification of biomarkers for HZE-induced HCC.

59 BASIC BIOLOGICAL SCIENCES↗

Probability of Loss of Assured Safety in Systems with Multiple Time-Dependent Failure Modes

Weak link (WL)/strong link (SL) systems are important parts of the overall operational design of high-consequence systems. In such designs, the SL system is very robust and is intended to permit operation of the entire system under, and only under, intended conditions. In contrast, the WL system is intended to fail in a predictable and irreversible manner under accident conditions and render the entire system inoperable before an accidental operation of the SL system. The likelihood that the WL system will fail to deactivate the entire system before the SL system fails (i.e., degrades into a configuration that could allow an accidental operation of the entire system) is referred to as probability of loss of assured safety (PLOAS). Representations for PLOAS for situations in which both link physical properties and link failure properties are time-dependent are derived and numerically evaluated for a variety of WL/SL configurations, including PLOAS defined by (i) failure of all SLs before failure of any WL, (ii) failure of any SL before failure of any WL, (iii) failure of all SLs before failure of all WLs, and (iv) failure of any SL before failure of all WLs. The effects of aleatory uncertainty and epistemic uncertainty in the definition and numerical evaluation of PLOAS are considered.

Aleatory uncertainty↗

On time-dependent backgrounds in 1 + 1 dimensional string theory

In perturbative string theory, one is generally interested in asymptotic observables, such as the S-matrix in flat spacetime, and boundary correlation functions in anti-de Sitter spacetime. However, there are backgrounds in which such observables do not exist. We study examples of such backgrounds in 1 + 1 dimensional string theory. In these examples, the Liouville wall accelerates and can become spacelike in the past and/or future. When that happens, the corresponding null infinity, at which the standard scattering states are defined, is shielded by the Liouville wall. We compute scattering and particle production amplitudes in these backgrounds in the region in parameter space where the wall remains timelike, and discuss the continuation of this picture to the spacelike regime. We also discuss the physics from the point of view of the dynamics of free fermions in backgrounds with a time-dependent Fermi surface.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Time-dependent experimental identification of inter-ELM microtearing modes in the tokamak edge on DIII-D

In a series of discharges on the DIII-D tokamak, fast vertical plasma jogs are used to induce current perturbations in the steep gradient region of the H-mode edge. These current perturbations directly influence the edge q profile, decoupling the resonant location and instability drive of pedestal-localized microtearing modes (MTMs.) By exploiting this effect, we develop and apply a new experimental technique to track the dynamical frequency evolution of MTMs in the pedestal region, providing a compelling validation of the MTM model. The frequency of potential MTMs is calculated as the Doppler-shifted electron diamagnetic frequency at rational q=m/n surfaces, showing remarkable agreement with chirped frequency behavior of n=3, 4 and 5 modes detected with fast magnetics. Data is collected throughout multiple ELM cycles in order to build robust statistics describing the time-dependent frequency evolution of MTMs, which can be explained by examining the recovery of pedestal gradients after an ELM event. MTMs have a dominant transport contribution in the electron thermal channel, so the presented results indicate that reduced models of pedestal transport must be electromagnetic in nature and constructed with accurate calculations of MTM stability; inclusion of this physics is essential for accurate predictions of the electron temperature pedestal profile. Supporting measurements of mode saturation, propagation direction and transport fingerprints are made to support the dynamic frequency determination, unambiguously and experimentally identifying MTMs in the pedestal region of DIII-D.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Time dependent particle emission from fission products

Decay heating following nuclear fission is an important factor in the design of nuclear facilities; impacting a variety of aspects ranging from cooling requirements to shielding design. Calculations of decay heat, often assumed to be a simple product of activity and average decay product energy, are complicated by the so called 'pandemonium effect'. Elucidated in the 1970's this complication arises from beta-decays feeding high-energy nuclear levels; redistributing the available energy between betas and gammas. Increased interest in improving the theoretical predictions of decay probabilities has been, in part, motivated by the recent experimental effort utilizing the Total Absorption Gamma-ray Spectrometer (TAGS) to determine individual beta-decay transition probabilities to individual nuclear levels. Accurate predictions of decay heating require a detailed understanding of these transition probabilities, accurate representation of particle decays as well as reliable predictions of temporal inventories from fissioning systems. We will discuss a recent LANL effort to provide a time dependent study of particle emission from fission products through a combination of Quasiparticle Random Phase Approximation (QRPA) predictions of beta-decay probabilities, statistical Hauser-Feshbach techniques to obtain particle and gamma-ray emissions in statistical Hauser-Feshbach and the nuclear inventory code, CINDER.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Note on the Barotropic Response of Sea Level to Time-Dependent Wind Forcing

This study examines the extent to which sea level variations at periods between 30 days and 1 year and spatial scales greater than 1000 km can be described by the wind- driven linear barotropic vorticity dynamics. The TOPEX/POSEIDON altimetric observations of sea level and the wind products of the National Meteorological Center are used as the database for the study. Each term of the linear barotropic vorticity equation was evaluated by averaging over regions of 10 deg x 10 deg. In most of the open ocean the result of the analysis suggests that the sea level variabilities at the scales considered cannot be fully described by the equation; the apparent net vorticity change is more than what can be explained by the local wind stress curl. In the few regions where the wind stress curl is strong enough to balance the vorticity budget, predominantly in the northeast Pacific and the southeast Pacific, the balance is basically achieved in terms of the time-dependent topographic Sverdrup relation, namely, the balance between the advection of the planetary vorticity plus the topography-induced vorticity and the forcing by the wind stress curl.

Fu, Lee-Lueng↗