SEARCH · Search NASA

Results for “Two dimensional flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

All sources NASA NTRS DOE OSTI

NASA NTRS1993

Engineering approach to the prediction of shock patterns in bounded high-speed flows

A two-dimensional symmetric wedge configuration representative of a single high-speed intake in steady flow was investigated. The analysis presented here is intended as an engineering approach for estimating certain features of the internal shock system. The primary interest here is the prediction of the size and location of the almost-normal shock wave that develops when the leading-edge shocks intersect at angles above a certain critical value that is less than the wedge detachment angle. The almost-normal shock wave is frequently referred to as the 'Mach stem', Parametric studies enabled the sensitivity of the Mach stem height to various flowfield parameters to be examined, thus indicating how accurately these parameters must be measured in a given experiment. Results of these predictions were compared with those of a steady-flow experiment performed at nominal freestream Mach numbers from 2.8 to 5. The predicted stem heights were consistently lower than the mean experimental values, attributable both to experimental uncertainties and to certain simplifying assumptions used in the analysis. Modification of these assumptions to better represent the test environment improved the analytical results.

Azevedo, D. J.↗

NASA NTRS1956

Theoretical investigation of flutter of two-dimensional flat panels with one surface exposed to supersonic potential flow

A Rayleigh type analysis involving chosen modes of the panel as degrees of freedom is used to treat the flutter of a two-dimensional flat panel supported at its leading and trailing edges and subjected to a middle-plane tensile force. The panel has a supersonic stream passing over its upper surface and still air below. The aerodynamic forces due to the supersonic stream are obtained from the theory for linearized two-dimensional unsteady flow and the forces due to the still air are obtained from acoustical theory. In order to study the effect of increasing the number of modes in the analysis, two and then four modes are employed. The modes used are the first four natural modes of the panel in a vacuum with no tensile force acting. The analysis includes these variables: Mach number, structural damping, tensile force, density of the still air, and edge fixity (clamped and pinned). For certain combinations of these variables, stability boundaries are obtained which can be used to determine the panel thickness required to prevent flutter for any panel material and altitude.

Nelson, Herbert C↗

NASA NTRS1991

Two-dimensional adaptive-wall tests in the NASA Ames two- by two-foot transonic wind tunnel

The first tests conducted in the adaptive-wall test section of the Ames Research Center's 2- by 2-Foot Transonic Wind Tunnel are described. A procedure was demonstrated for reducing wall interference in transonic flow past a two-dimensional airfoil by actively controlling flow through the slotted walls of the test section. Flow through the walls was controlled by adjusting pressures in compartments of plenums above and below the test section. Wall interference was assessed by measuring (with a laser velocimeter) velocity distributions along a contour surrounding the model, and then checking those measurements for their compatibility with free-air far-field boundary conditions. Plenum pressures for minimum wall interference were determined from empirical influence coefficients. An NACA 0012 airfoil was tested at angles of attack of 0 and 2, and at Mach numbers between 0.70 and 0.85. In all cases the wall-setting procedure greatly reduced wall interference. Wall interference, however, was never completely eliminated, primarily because the effect of plenum pressure changes on the velocities along the contour could not be accurately predicted.

Schairer, Edward T.↗

NASA NTRS1984

A numerical study of the two- and three-dimensional unsteady Navier-Stokes equations in velocity-vorticity variables using compact difference schemes

A compact finite-difference approximation to the unsteady Navier-Stokes equations in velocity-vorticity variables is used to numerically simulate a number of flows. These include two-dimensional laminar flow of a vortex evolving over a flat plate with an embedded cavity, the unsteady flow over an elliptic cylinder, and aspects of the transient dynamics of the flow over a rearward facing step. The methodology required to extend the two-dimensional formulation to three-dimensions is presented.

Gatski, T. B.↗

DOE OSTI2020

Simulating coupled surface–subsurface flows with ParFlow v3.5.0: capabilities, applications, and ongoing development of an open-source, massively parallel, integrated hydrologic model

Surface flow and subsurface flow constitute a naturally linked hydrologic continuum that has not traditionally been simulated in an integrated fashion. Recognizing the interactions between these systems has encouraged the development of integrated hydrologic models (IHMs) capable of treating surface and subsurface systems as a single integrated resource. IHMs are dynamically evolving with improvements in technology, and the extent of their current capabilities are often only known to the developers and not general users. This article provides an overview of the core functionality, capability, applications, and ongoing development of one open-source IHM, ParFlow. ParFlow is a parallel, integrated, hydrologic model that simulates surface and subsurface flows. ParFlow solves the Richards equation for three-dimensional variably saturated groundwater flow and the two-dimensional kinematic wave approximation of the shallow water equations for overland flow. The model employs a conservative centered finite-difference scheme and a conservative finite-volume method for subsurface flow and transport, respectively. ParFlow uses multigrid-preconditioned Krylov and Newton–Krylov methods to solve the linear and nonlinear systems within each time step of the flow simulations. The code has demonstrated very efficient parallel solution capabilities. ParFlow has been coupled to geochemical reaction, land surface (e.g., the Common Land Model), and atmospheric models to study the interactions among the subsurface, land surface, and atmosphere systems across different spatial scales. This overview focuses on the current capabilities of the code, the core simulation engine, and the primary couplings of the subsurface model to other codes, taking a high-level perspective.

58 GEOSCIENCES↗

NASA NTRS1991

Verification of the Proteus two-dimensional Navier-Stokes code for flat plate and pipe flows

The Proteus Navier-Stokes Code is evaluated for two-dimensional/axisymmetric, viscous, incompressible, internal and external flows. The particular cases to be discussed are laminar and turbulent flows over a flat plate, laminar and turbulent dveloping pipe flows and turbulent pipe flow with swirl. Results are compared with exact solutions, empirical correlations and experimental data. A detailed description of the code set-up, including boundary conditions, intitial conditions, grid size and grid packing is given for each case.

Conley, Julianne M.↗

NASA NTRS1986

An explicit finite-volume time-marching procedure for turbulent flow calculations

A method was developed which calculates two-dimensional, transonic, viscous flow in ducts. The finite-volume, time-marching formulation is used to obtain steady flow solutions of the Reynolds-averaged form of the Navier-Stokes equations. The entire calculation is performed in the physical domain. Control volumes are chosen so that smoothing of flow properties, typically required for stability, is not required. Different time steps are used in the different governing equations. A new pressure interpolation scheme is introduced which improves the shock capturing ability of the method. A multi-volume method for pressure changes in the boundary layer allows calculations which use very long and thin control volumes (length/height - 1000). The method is compared with two test cases. Essentially incompressible turbulent boundary layer flow in an adverse pressure gradient is calculated and the computed distributions of mean velocity and shear are in good agreement with the measurements. Transonic viscous flow in a converging diverging nozzle is calculated; the Mach number upstream of the shock is approximately 1.25. The agreement between the calculated and measured shock strength and total pressure losses is good.

Nicholson, Stephen↗

NASA NTRS1987

An explicit finite-volume time-marching procedure for turbulent flow calculations

Nicholson, Stephen↗

NASA NTRS2015

Impedance Eduction in Sound Fields With Peripherally Varying Liners and Flow

A two-dimensional impedance eduction theory is extended to three-dimensional sound fields and peripherally varying duct liners. The approach is to first measure the acoustic pressure field at a series of flush-mounted wall microphones located around the periphery of the flow duct. The numerical solution for the acoustic pressure field at these microphones is also obtained by solving the three-dimensional convected Helmholtz equation using the finite element method. A quadratic objective function based on the difference between the measured and finite element solution is constructed and the unknown impedance function is obtained by minimizing this objective function. Impedance spectra educed for two uniform-structure liners (a wire-mesh and a conventional liner) and a hard-soft-hard peripherally varying liner (for which the soft segment is that of the conventional liner) are presented. Results are presented at three mean flow Mach numbers and fourteen sound source frequencies. The impedance spectra of the uniform-structure liners are also computed using a two-dimensional impedance eduction theory. The primary conclusions of the study are: 1) when measured data is used with the uniform-structure liners, the three-dimensional theory reproduces the same impedance spectra as the two-dimensional theory except for frequencies corresponding to very low or very high liner attenuation; and 2) good agreement between the educed impedance spectra of the uniform structure conventional liner and the soft segment of the peripherally varying liner is obtained.

Watson, W. R.↗

NASA NTRS1992

Development of a CFD code for internal flows in liquid fueled engines

To support the design efforts of engines in which liquid propellants are used, one is often required to analyze incompressible, two-dimensional or axisymmetric flows within ducts and cavities with rotating walls and complicated geometries. The steady-state solution is of interest in most cases. This code is intended to provide a tool for efficient computational fluid dynamics (CFD) analysis of such flow problems, taking advantage of the artificial compressibility concept and the Beam-Warming numerical scheme modified for second order accurate, implicit boundary conditions. These concepts ensure a stable, robust, and accurate algorithm due to the reduced speed of sound and the accuracy of the boundary conditions. The code is dedicated only to two-dimensional or axisymmetric flows with or without swirl. Three-dimensional computation is excluded to increase efficiency and speed. This paper briefly presents the theory of the code, as well as several benchmark applications with comparison to well known analytical solutions. In all these test cases, the code produced accurate results.

Dakhoul, Youssef↗

NASA NTRS1985

Numerical studies of 2-dimensional flows

A formulation of the lambda scheme for the analysis of two dimensional inviscid, compressible, unsteady transonic flows is presented. The scheme uses generalized Riemann variables to determine the appropriate two point, one sided finite difference approximation for each derivative in the unsteady Euler equations. These finite differences are applied at the predictor and corrector levels with shock updating at each level. The weaker oblique shocks are captured, but strong near normal shocks are fitted into the flow using the Rankine-Hugoniot relations. This code is demonstrated with a numerical example of a duct flow problem with developing normal and oblique shock waves. The technique is implemented in a code which has been made efficient by streamlining to a minimal number of operations and by eliminating branch statements. The scheme is shown to provide an accurate analysis of the flow, including formation, motions, and interactions of shocks; the results obtained on a relatively coarse mesh are comparable to those obtained by other methods on much finer meshes.

Moretti, G.↗

DOE OSTI2018

Modeling flow distribution and pressure drop in redox flow batteries

The combination of interdigitated flow fields (IDFF) with porous electrodes offers lower pressure drop and better performance than conventional flow‐through porous electrodes in redox flow batteries. Comprehensive three‐dimensional and simplified one‐dimensional + two‐dimensional models describing flow uniformity and pressure losses within flow through, parallel, and interdigitated flow fields were developed and used to demonstrate the benefits of IDFF. Analytical solutions for IDFF that compare favorably with computational fluid dynamics quantify the trade between pressure loss and velocity maldistribution both along the channels and within the electrode. © 2018 American Institute of Chemical Engineers AIChE J , 64: 3746–3755, 2018

MacDonald, Malcolm↗

NASA NTRS1987

Application of the CSCM method to the design of wedge cavities

This paper describes the application of the conservative supra characteristic method (CSCM) to predict the flow around two-dimensional slot injection cooled cavities in hypersonic flow. Seven different numerical solutions are presented that model three different experimental designs. The calculations manifest outer flow conditions including the effects of nozzle/lip geometry, angle of attack, nozzle inlet conditions, boundary and shear layer growth and turbulance on the surrounding flow. The calculations were performed for analysis prior to wind tunnel testing for sensitivity studies early in the design process. Qualitative and quantitative understanding of the flows for each of the cavity designs and design recommendations are provided. The present paper demonstrates the ability of numerical schemes, such as the CSCM method, to play a significant role in the design process.

Venkatapathy, Ethiraj↗

NASA NTRS1980

Prediction and measurement of turbulent aerodynamic trailing edge flows

A viscous-inviscid interaction algorithm is developed for prediction of two-dimensional mean and fluctuating velocity distributions in the wake immediately downstream of an airfoil trailing edge. A composite pressure field is defined, and a Poisson equation solved for transverse pressure variations. A parabolized form of the time-averaged steady Navier-Stokes equations are solved in conjunction with a viscous-augmented two-dimensional inviscid potential flow analysis. A tensor constitutive equation is employed to predict Reynolds stress distributions from solutions of a turbulence kinetic energy two equation closure model. Numerical predictions compared favorably with detailed experimental data for mean and fluctuating velocities, and Reynolds shear stress distributions, in the trailing edge region of a NACA 63-012 airfoil.

Baker, A. J.↗

NASA NTRS1972

Momentum flux in two phase two component low quality flow.

Values of a one-dimensional momentum flux at a test section discharge station of a two-phase two-component low quality flow computed by two methods, one based on a one-dimensional homogeneous model and the other on a variable slip model, are compared to experimental values for a range of two-phase flow conditions. The comparison seems to indicate the superior accuracy in momentum flux predictions to be on the side of the one-dimensional homogeneous model.

Baumeister, K. J.↗

NASA NTRS1983

Numerical analysis of plasma flows in an MPC duct with diverter

The two-dimensional MHD-flow of the ideal plasma in a channel of the magnetoplasma compressor (MPC) with an axial hole in the central electrode (divertor) is numerically simulated. The steady-state regime of the flow is obtained. The influence of finite and periodical density perturbation at the entry of the channel on the compressional flow properties is investigated. It is shown that the flow is stable under such perturbations.

Badin, V. V.↗

NASA NTRS1944

On the plane potential flow past a lattice of arbitrary airfoils

The two-dimensional, incompressible potential flow past a lattice of airfoils of arbitrary shape is investigated theoretically. The problem is treated by usual methods of conformal mapping in several stages, one stage corresponding to the mapping of the framework of the arbitrary line lattice and another significant stage corresponding to the Theodorsen method for the mapping of the arbitrary single wing profile into a circle. A particular feature in the theoretical treatment is the special handling of the regions at an infinite distance in front of and behind the lattice. Expressions are given for evaluation of the velocity and pressure distribution at the airfoil boundary. An illustrative numerical example is included.

Garrick, I E↗

DOE OSTI2021

Physics-informed neural networks for solving forward and inverse flow problems via the Boltzmann-BGK formulation

We report the Boltzmann equation with the Bhatnagar-Gross-Krook collision model (Boltzmann-BGK equation) has been employed to describe multiscale flows, i.e., from the hydrodynamic limit to free molecular flow. In this study we employ physics-informed neural networks (PINNs) to solve forward and inverse problems via the Boltzmann-BGK formulation (PINN-BGK), enabling PINNs to model flows in both the continuum and rarefied regimes. In particular, the PINN-BGK is composed of three sub-networks, i.e., the first for approximating the equilibrium distribution function, the second for approximating the non-equilibrium distribution function, and the third one for encoding the Boltzmann-BGK equation as well as the corresponding boundary/initial conditions. By minimizing the residuals of the governing equations and the mismatch between the predicted and provided boundary/initial conditions, we can approximate the Boltzmann-BGK equation for both continuous and rarefied flows. For forward problems, the PINN-BGK is utilized to solve various benchmark flows given boundary/initial conditions, e.g. Kovasznay flow, Taylor-Green flow, cavity flow, and micro Couette flow for Knudsen number up to 5. For inverse problems, we focus on rarefied flows in which accurate boundary conditions are difficult to obtain. We employ the PINN-BGK to infer the flow field in the entire computational domain given a limited number of interior scattered measurements on the velocity without using the (unknown) boundary conditions. Results for the two-dimensional micro Couette and micro cavity flows with Knudsen numbers ranging from 0.1 to 10 indicate that the PINN-BGK can infer the velocity field in the entire domain with good accuracy. Finally, we also present some results on using transfer learning to accelerate the training process. Specifically, we can obtain a three-fold speedup comparted to the standard training process (e.g., Adam plus L-BFG-B) for the two-dimensional flow problems considered in our work.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗