Search NASA⌕ Search

SEARCH · Search NASA

Results for “Yield function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

A Thin Lens Model for Charged-Particle RF Accelerating Gaps

Presented is a thin-lens model for an RF accelerating gap that considers general axial fields without energy dependence or other a priori assumptions. Both the cosine and sine transit time factors (i.e., Fourier transforms) are required plus two additional functions; the Hilbert transforms the transit-time factors. The combination yields a complex-valued Hamiltonian rotating in the complex plane with synchronous phase. Using Hamiltonians the phase and energy gains are computed independently in the pre-gap and post-gap regions then aligned using the asymptotic values of wave number. Derivations of these results are outlined, examples are shown, and simulations with the model are presented.

43 PARTICLE ACCELERATORS↗

Linear and Nonlinear Constitutive Model for Piezoelectricity in ALEGRA-FE

This report develops and documents linear and nonlinear constitutive relations implemented in ALEGRA-FE (ferroelectric). A thermodynamic framework is created to describe the electromechanical system in the form of a free energy functional. Constitutive relations are derived by taking series expansions of the free energy functional with respect to the independent fields. First order expansion terms yield linear constitutive relations and higher order expansion terms yield non-linear constitutive relations. This document serves as supplement to Section 4 of Sandia Report SAND2013-7363, Rev 3. Methods for implementation of kinematic relations of piezoelectric models and rotation of material principal axes are covered in the supplemented report. Additional discussion on phase velocity calculation is also presented.

30 DIRECT ENERGY CONVERSION↗

Transforming our understanding of chloroplast-associated genes through comprehensive characterization of protein localizations and protein-protein interactions

Bioenergy crops are a renewable source of fuels and are a critical base for building a carbon-neutral economy. Rational engineering of bioenergy crops has the potential to enhance the yields. However, our ability to engineer plants is limited because the functions of most genes remain unknown. Systematic characterization of gene function in plants thus has the potential to greatly accelerate bioenergy research. Here, we focus on the chloroplast, an underexplored energy-producing organelle that is a hallmark of plants. The chloroplast is one of the promising targets of biofuel crop engineering efforts because of its central role in photosynthesis, metabolism, and intracellular signaling. However, the protein composition of the chloroplast and the functions of most of its proteins remain poorly characterized. At the core of this project, we sought to comprehensively determine the localization of chloroplast-associated proteins and generate a spatially defined protein-protein interaction network for chloroplast. For this purpose, we used the leading model alga Chlamydomonas reinhardtii, which greatly increased experimental speed and throughput. We illustrated the value of our findings to land plants by determining the localization of Arabidopsis thaliana land plant homologs of the Chlamydomonas proteins. Altogether, we were successful in determining the localization of 1,034 chloroplast-associated proteins in Chlamydomonas. The localizations provide numerous insights into the spatial organization of chloroplasts and how they function to support photosynthesis. The localization patterns of distinct proteins revealed new chloroplast structures and revealed new spatial organization inside the chloroplast. We also identified new components of known chloroplast structures, such as the chloroplast envelope, nucleoid, plastoglobuli, and pyrenoid. We identified these new components by investigating the interacting partners of known proteins. Many proteins localized in both the chloroplast and other cellular structures, thereby hinting at new functions and communication between cellular structures. We also applied machine learning on the atlas to generate predictions for the location of all of the proteins in Chlamydomonas. This enabled us to assign putative functions to many uncharacterized proteins based on their cellular location. Altogether, this research establishes a rich resource that opens new avenues of investigation and guides future work in deciphering and manipulating chloroplast function. Next, we developed an extensive protein-protein interaction network for the chloroplast by performing affinity purification-mass spectrometry on ~1,150 tagged chloroplast-associated proteins, the first such large-scale study in any photosynthetic organism. This dataset reveals 4,694 high-confidence protein-protein interactions, offering insights into the functions of thousands of conserved poorly-characterized chloroplast proteins. This systematic identification of protein-protein interactions in the chloroplast also provides multiple exciting new research directions and a detailed blueprint of the chloroplast's operation. This research lays the groundwork to decipher the inner workings of the chloroplast, the cell structure at the heart of photosynthesis. The spatial atlas and protein-protein interactions reveal chloroplast organizational features that would not have been accessible with traditional approaches. The localization mapping, insights into the function, and research materials generated further provide a rich resource for the research community to advance the understanding of how the chloroplast is organized to enable engineering of enhanced photosynthetic organisms.

59 BASIC BIOLOGICAL SCIENCES↗

Slicing of silicon into sheet material: Silicon sheet growth development for the large area silicon sheet task of the Low Cost Silicon Solar Array project

The limits of blade tolerance were defined. The standard blades are T-2 thickness tolerance. Good results were obtained by using a slurry fluid consisting of mineral oil and a lubricity additive. Adjustments of the formulation and fine tuning of the cutting process with the new fluid are necessary. Test results and consultation indicate that the blade breakage encountered with water based slurries is unavoidable. Two full capacity (974 wafer) runs were made on the large prototype saw. Both runs resulted in extremely low yield. However, the reasons for the low yield were lack of proper technique rather than problems with machine function. The test on the effect of amount of material etched off of an as-sawn wafer on solar cell efficiency were completed. The results agree with previous work at JPL in that the minimum material removed per side that gives maximum efficiency is on the order of 10 microns.

Fleming, J. R.↗

Proposed method for determining the thickness of glass in solar collector panels

An analytical method was developed for determining the minimum thickness for simply supported, rectangular glass plates subjected to uniform normal pressure environmental loads such as wind, earthquake, snow, and deadweight. The method consists of comparing an analytical prediction of the stress in the glass panel to a glass breakage stress determined from fracture mechanics considerations. Based on extensive analysis using the nonlinear finite element structural analysis program ARGUS, design curves for the structural analysis of simply supported rectangular plates were developed. These curves yield the center deflection, center stress and corner stress as a function of a dimensionless parameter describing the load intensity. A method of estimating the glass breakage stress as a function of a specified failure rate, degree of glass temper, design life, load duration time, and panel size is also presented.

Moore, D. M.↗

Fermi-Compton scattering due to magnetopause surface fluctuations in Jupiter's magnetospheric cavity

The effects of boundary surface fluctuations on a spectrum of electromagnetic radiation trapped in a high Q (quality) cavity are considered. Undulating walls introduce small frequency shifts at reflection to the radiation, and it is argued that the process is entirely analogous to both Fermi (particle) acceleration and inverse Compton scattering. A Fokker-Planck formalism is pursued; it yields a diffusion equation in frequency for which the Green's function and steady-state solutions are found. Applying this analysis to the Jovian continuum radiation discovered by Voyager spacecraft, it is suggested that characteristic diffusion times are greater than 1 year, and that in order to account for the steep frequency spectra observed, an unidentified loss mechanism must operate in the cavity with a decay time constant approximately equal to the characteristic diffusion time divided by 28. A radiator-reactor model of the cavity is investigated to provide an estimate for the intrinsic luminosity of the low frequency (approximately 100 Hz) continuum source whose power is approximately 7 x 10 to the 6th W.

Barbosa, D. D.↗

Formal convergence characteristics of elliptically constrained incremental Newton-Raphson algorithms

Various aspects of the convergence, uniqueness, and existence properties associated with solutions generated via the elliptically constrained incremental Newton-Raphson (ECINR) algorithm are analyzed. Several theorems are developed, and the formal behavior of the elliptically constrained scheme developed by Padovan (1981) is discussed in detail. Consideration is given to global and local rates of convergence, to the determination of the occurrence of safety zones wherein the algorithm yields inherently convergent results, to formal limitations on the class of functions which the scheme can be applied to solve, and to single and multidimensional formalisms on existence uniqueness and convergence. Special attention is given to functions whose Jacobian matrix exhibit positive, negative, semi and indefinite properties. Several significant advantages of ECINR over the classical INR are mentioned.

Padovan, J.↗

Impact cratering and spall failure at gabbro

Both hypervelocity impact and dynamic spall experiments were carried out on a series of well-indurated samples of gabbro. The impact experiments carried out with 0.04 to 0.2g, 5-6 km/sec projectiles produced deci-centimeter-sized craters and demonstrated crater efficiencies of 6/10 to the - 9 g/erg, and order of magnitude greater than in metal and some two to three times that of previous experiments on less strong igneous rocks. Most of the crater volume (some 60 to 80%) is due to spall failure. Distribution of cumulative fragment number, as a function of mass of fragments with masses greater than 0.1 gram yield values of b = d(log10N sub f)dlog10(m)of -0.5 to -0.6, where N sub f is the cumulate number of fragments and m is the mass of fragments. These values are in agreement or slightly higher than those obtained for less strong rocks and indicate that a large fraction of the ejectra resides in a few large fragments.

Lange, M. A.↗

Impact cratering and spall failure of gabbro

Both hypervelocity impact and dynamic spall experiments were carried out on a series of well-indurated samples of gabbro. The impact experiments carried out with 0.04 to 0.2 g, 5-6 km/sec projectiles produced deci-centimeter-sized craters and demonstrated crater efficiencies of 6/10 to the -9 g/erg, and order of magnitude greater than in metal and some two to three times that of previous experiments on less strong igneous rocks. Most of the crater volume (some 60 to 80 percent) is due to spall failure. Distribution of cumulative fragment number, as a function of mass of fragments with masses greater than 0.1 gram yield values of b = d(log10N sub f)dlog10(m) of -0.5 to -0.6, where N sub f is the cumulate number of fragments and m is the mass of fragments. These values are in agreement or slightly higher than those obtained for less strong rocks and indicate that a large fraction of the ejecta resides in a few large fragments.

Lange, M. A.↗

Solar-cell interconnect design for terrestrial photovoltaic modules

Useful solar cell interconnect reliability design and life prediction algorithms are presented, together with experimental data indicating that the classical strain cycle (fatigue) curve for the interconnect material does not account for the statistical scatter that is required in reliability predictions. This shortcoming is presently addressed by fitting a functional form to experimental cumulative interconnect failure rate data, which thereby yields statistical fatigue curves enabling not only the prediction of cumulative interconnect failures during the design life of an array field, but also the quantitative interpretation of data from accelerated thermal cycling tests. Optimal interconnect cost reliability design algorithms are also derived which may allow the minimization of energy cost over the design life of the array field.

Mon, G. R.↗

SASS wind ambiguity removal by direct minimization. II - Use of smoothness and dynamical constraints

A variational analysis method (VAM) is used to remove the ambiguity of the Seasat-A Satellite Scatterometer (SASS) winds. The VAM yields the best fit to the data by minimizing an objective function S which is a measure of the lack of fit. The SASS data are described and the function S and the analysis procedure are defined. Analyses of a single ship report which are analogous to Green's functions are presented. The analysis procedure is tuned and its sensitivity is described using the QE II storm. The procedure is then applied to a case study of September 6, 1978, south of Japan.

Hoffman, R. N.↗

Lorentz-covariant dissipative Lagrangian systems

The concept of dissipative Hamiltonian system is converted to Lorentz-covariant form, with evolution generated jointly by two scalar functionals, the Lagrangian action and the global entropy. A bracket formulation yields the local covariant laws of energy-momentum conservation and of entropy production. The formalism is illustrated by a derivation of the covariant Landau kinetic equation.

Kaufman, A. N.↗

Application of shock wave data to earth and planetary science

It is pointed out that shock wave data for: (1) low temperature condensable gases H2 and He, (2) H2O, CH4, NH3, CO, CO2, and N2 ices, and (3) silicates, metals, oxides and sulfides have many applications in geophysics and planetary science. The present paper is concerned with such applications. The composition of planetary interiors is discussed, taking into account the division of the major constituent of the planets in three groups on the basis of 'cosmic abundance' arguments, the H-He mixtures in the case of Jupiter and Saturn, shock wave data for hydrogen, and constraints on the internal structure of Uranus and Neptune. Attention is also given to the earth's mantle, shock wave data for mantle materials, the earth's core, impacts on planetary surfaces, elastic wave velocities as a function of pressure along the Hugoniot of iron, and reactions which yield the CO2 bearing atmospheres for Venus, earth, and Mars.

Ahrens, T. J.↗

A low-cost optical data acquisition system for vibration measurement

A low cost optical data acquisition system was designed to measure deflection of vibrating rotor blade tips. The basic principle of the new design is to record raw data, which is a set of blade arrival times, in memory and to perform all processing by software following a run. This approach yields a simple and inexpensive system with the least possible hardware. Functional elements of the system were breadboarded and operated satisfactorily during rotor simulations on the bench, and during a data collection run with a two-bladed rotor in the Lewis Research Center Spin Rig. Software was written to demonstrate the sorting and processing of data stored in the system control computer, after retrieval from the data acquisition system. The demonstration produced an accurate graphical display of deflection versus time.

Posta, S. J.↗

Simulation of double layers in a model auroral circuit with nonlinear impedance

A reduced circuit description of the U-shaped potential structure of a discrete auroral arc, consisting of the flank transmission line plus parallel-electric-field region, is used to provide the boundary condition for one-dimensional simulations of the double-layer evolution. The model yields asymptotic scalings of the double-layer potential, as a function of an anomalous transport coefficient alpha and of the perpendicular length scale l(a) of the arc. The arc potential phi(DL) scales approximately linearly with alpha, and for alpha fixed phi (DL) about l(a) to the z power. Using parameters appropriate to the auroral zone acceleration region, potentials of phi (DPL) 10 kV scale to projected ionospheric dimensions of about 1 km, with power flows of the order of magnitude of substorm dissipation rates.

Smith, R. A.↗

Low-cost optical data acquisition system for blade vibration measurement

A low cost optical data acquisition system was designed to measure deflection of vibrating rotor blade tips. The basic principle of the new design is to record raw data, which is a set of blade arrival times, in memory and to perform all processing by software following a run. This approach yields a simple and inexpensive system with the least possible hardware. Functional elements of the system were breadboarded and operated satisfactorily during rotor simulations on the bench, and during a data collection run with a two-bladed rotor in the Lewis Research Center Spin Rig. Software was written to demonstrate the sorting and processing of data stored in the system control computer, after retrieval from the data acquisition system. The demonstration produced an accurate graphical display of deflection versus time.

Posta, Stephen J.↗

Stellar populations; Proceedings of the Meeting, Baltimore, MD, May 20-22, 1986

Various papers covering recent findings on stellar populations are presented. The topics addressed include: the bulges of the Galaxy and M31, kinematics of the local subdwarfs and the collapse of the Galaxy, the red stellar population of the local group dwarf galaxies, globular clusters in the local group galaxies, the initial mass function, and star formation histories of galactic disks. Also discussed are: yield and abundance constraints on galactic chemical evolution, population synthesis in early type galaxies, the evolution of stellar populations in galaxies, a theoretical perspective on spectral evolution of galaxies, and the structure and kinematics of galaxy populations.

Norman, Colin A.↗

Cosmic-ray transport in accelerating flows

The quasi-linear transport equation of energetic charged particles is derived, including scattering by Alfven waves propagating parallel and antiparallel to a uniform magnetic field, losses by synchrotron radiation, and acceleration of the cold background fluid supporting the waves. As in the comoving frame equations of radiative transfer, scattering, and loss terms are evaluated in the frame in which the fluid is locally at rest. The diffusion approximation is applied to the resulting equation, yielding a transport equation for the isotropic part of the distribution function and a first-order approximation to the anisotropy. The conditions under which this approximation may be applied are discussed. In the nonrelativistic regime, the standard equation of the diffusion approximation is recovered. As contributions previously investigated, new effects appear from the spatial and temporal variations of the fluid velocity as well as the synchrotron radiation terms. These are discussed in detail.

Kirk, John G.↗