Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic force microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Laser irradiation effects on the CdTe/ZnTe quantum dot structure studied by Raman and AFM spectroscopy

Micro-Raman spectroscopy has been applied to investigate the impact of laser irradiation on semiconducting CdTe/ZnTe quantum dots (QDs) structures. A reference sample (without dots) was also studied for comparison. Both samples were grown by molecular beam epitaxy technique on the p-type GaAs substrate. The Raman spectra have been recorded for different time of a laser exposure and for various laser powers. The spectra for both samples exhibit peak related to the localized longitudinal (LO) ZnTe phonon of a wavenumber equal to 210 cm{sup -1}. For the QD sample, a broad band corresponding to the LO CdTe phonon related to the QD-layer appears at a wavenumber of 160 cm{sup -1}. With increasing time of a laser beam exposure and laser power, the spectra get dominated by tellurium-related peaks appearing at wavenumbers around 120 cm{sup -1} and 140 cm{sup -1}. Simultaneously, the ZnTe surface undergoes rising damage, with the formation of Te aggregates at the pinhole edge as reveal atomic force microscopy observations. Local temperature of irradiated region has been estimated from the anti-Stokes/Stokes ratio of the Te modes intensity and it was found to be close or exceeding ZnTe melting point. Thus, the laser damage can be explained by the ablation process.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Melanin as an active layer in biosensors

The development of pH sensors is of great interest due to its extensive application in several areas such as industrial processes, biochemistry and particularly medical diagnostics. In this study, the pH sensing properties of an extended gate field effect transistor (EGFET) based on melanin thin films as active layer are investigated and the physical mechanisms related to the device operation are discussed. Thin films were produced from different melanin precursors on indium tin oxide (ITO) and gold substrates and were investigated by Atomic Force Microscopy and Electrochemical Impedance Spectroscopy. Experiments were performed in the pH range from 2 to 12. EGFETs with melanin deposited on ITO and on gold substrates showed sensitivities ranging from 31.3 mV/pH to 48.9 mV/pH, depending on the melanin precursor and the substrate used. The pH detection is associated with specific binding sites in its structure, hydroxyl groups and quinone imine.

36 MATERIALS SCIENCE↗

Structure and composition of zirconium carbide thin-film grown by ion beam sputtering for optical applications

Thin film of compound material ZrC was deposited on Si (100) wafer using ion beam sputtering method. The deposition was carried out at room temperature and at base pressure of 3×10{sup −5} Pa. X-ray photoelectron spectroscopy (XPS) measurements were performed for determining the surface chemical compositions. Grazing incidence x-ray reflectivity (GIXRR) measurements were performed to study the film thickness, roughness and density. From GIXRR curve roughness value of the film was found less than 1 nm indicating smooth surface morphology. Films density was found 6.51 g/cm{sup 3}, which is close to bulk density. Atomic force microscopy (AFM) measurements were performed to check the surface morphology. AFM investigation showed that the film surface is smooth, which corroborate the GIXRR data. Figure 2 of the original article PDF file, as supplied to AIP Publishing, contained a PDF processing error. This article was updated on 12 May 2014 to correct that error.

36 MATERIALS SCIENCE↗

Dependence of Crystallographic Orientation on Pitting Corrosion Behavior of Ni-Fe-Cr Alloy 028

The influence of crystallographic orientation on the pitting corrosion behavior of Ni-Fe-Cr alloy 028 was studied using a combination of X-ray diffraction (XRD), electron backscatter diffraction (EBSD), potentiodynamic polarization technique, and atomic force microscopy (AFM). The results show that there is anisotropy of pitting corrosion that strongly depends on crystallographic orientation of the surface plane. The distribution of pit density in a standard stereographic triangle indicates that the crystallographic planes close to {100} are more prone to pitting corrosion compared to planes {110} and {111}. The surface energy calculation of (001) and (111) shows that the plane with a high atomic packing density has a low surface energy with concomitant strong resistance to pitting corrosion. A correlation function between crystallographic orientation and pitting corrosion susceptibility suggests a method that not only predicts the pitting resistance of known textured materials, but also could help to improve corrosion resistance by controlling material texture.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Size and surface effects on the magnetism of magnetite and maghemite nanoparticles

The size effects of magnetite and maghemite nanoparticles on their magnetic properties (magnetic moment, Curie temperature, blocking temperature, etc.) have been investigated. Magnetic separation and centrifugation of an aqueous solution of nanoparticles were used for their separation into fractions; their sizes were measured by atomic force microscopy, dynamic light scattering, and electron microscopy. A change in the size leads to a change in the Curie temperature and magnetic moment per formula unit. Both native nanoparticles and those covered with a bioresorbable layer have been considered. The magnetic properties have been calculated by the Monte Carlo method for the classical Heisenberg model with various bulk and surface magnetic moments.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Control and elimination of nucleation-related defects in GaP/Si(001) heteroepitaxy

GaP films were grown on offcut Si(001) substrates using migration enhanced epitaxy nucleation followed by molecular beam epitaxy, with the intent of controlling and eliminating the formation of heterovalent (III-V/IV) nucleation-related defects--antiphase domains, stacking faults, and microtwins. Analysis of these films via reflection high-energy electron diffraction, atomic force microscopy, and both cross-sectional and plan-view transmission electron microscopies indicate high-quality GaP layers on Si that portend a virtual GaP substrate technology, in which the aforementioned extended defects are simultaneously eliminated. The only prevalent remaining defects are the expected misfit dislocations due to the GaP-Si lattice mismatch.

36 MATERIALS SCIENCE↗

Preparation of iron oxides using ammonium iron citrate precursor: Thin films and nanoparticles

Ammonium iron citrate (C{sub 6}H{sub 8}O{sub 7}.nFe.nH{sub 3}N) was used as a precursor for preparing both iron-oxide thin films and nanoparticles. Thin films of iron oxides were fabricated on silicon (111) substrate using a successive-ionic-layer-adsorption-and-reaction (SILAR) method and subsequent hydrothermal or furnace annealing. Atomic force microscopy (AFM) images of the iron-oxide films obtained under various annealing conditions show the changes of the micro-scale surface structures and the magnetic properties. Homogenous Fe{sub 3}O{sub 4} nanoparticles around 4 nm in diameter were synthesized by hydrothermal reduction method at low temperature and investigated using transmission electron microscopy (TEM). - Graphical abstract: Both iron-oxide thin films and nanoparticles (about 4 nm in diameter) are successfully achieved via successive-ionic-layer-adsorption-and-reaction and hydrothermal techniques in the use of ammonium iron citrate as a precursor.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Morphological studies on block copolymer modified PA 6 blends

Recent studies show that compounding polyamide 6 (PA 6) with a PA 6 polyether block copolymers made by reaction injection molding (RIM) or continuous anionic polymerization in a reactive extrusion process (REX) result in blends with high impact strength and high stiffness compared to conventional rubber blends. In this paper, different high impact PA 6 blends were prepared using a twin screw extruder. The different impact modifiers were an ethylene propylene copolymer, a PA PA 6 polyether block copolymer made by reaction injection molding and one made by reactive extrusion. To ensure good particle matrix bonding, the ethylene propylene copolymer was grafted with maleic anhydride (EPR-g-MA). Due to the molecular structure of the two block copolymers, a coupling agent was not necessary. The block copolymers are semi-crystalline and partially cross-linked in contrast to commonly used amorphous rubbers which are usually uncured. The combination of different analysis methods like atomic force microscopy (AFM), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) gave a detailed view in the structure of the blends. Due to the partial cross-linking, the particles of the block copolymers in the blends are not spherical like the ones of ethylene propylene copolymer. The differences in molecular structure, miscibility and grafting of the impact modifiers result in different mechanical properties and different blend morphologies.

36 MATERIALS SCIENCE↗

Note: A method for minimizing oxide formation during elevated temperature nanoindentation

A standardized method to protect metallic samples and minimize oxide formation during elevated-temperature nanoindentation was adapted to a commercial instrument. Nanoindentation was performed on Al (100), Cu (100), and W (100) single crystals submerged in vacuum oil at 200 °C, while the surface morphology and oxidation was carefully monitored using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The results were compared to room temperature and 200 °C nanoindentation tests performed without oil, in order to evaluate the feasibility of using the oil as a protective medium. Extensive surface characterization demonstrated that this methodology is effective for nanoscale testing.

36 MATERIALS SCIENCE↗

Highly conductive indium nanowires deposited on silicon by dip-pen nanolithography

In this paper, we developed a new dip-pen nanolithography (DPN) method. Using this method, we fabricated conductive nanowires with diameters of 30–50 nm on silicon substrates. To accomplish this, indium was transferred from an atomic force microscopy tip to the surface by applying a potential difference between the tip and substrate. The fabricated indium nanowires were several micrometers in length. Unlike thermal DPN, our DPN method hardly oxidized the indium, producing nanowires with conductivities from 5.7 × 10{sup −3} to 4 × 10{sup −2} Ω cm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanotube-based three-dimensional albumin composite obtained using continuous laser radiation

The possibility of developing three-dimensional nanostructures for damaged bone and tissue restoration, including treatment of human congenital malformation is considered. Four types of multiwalled and single-walled carbon nanotubes fabricated by chemical vapor deposition via disproportionation on Fe clusters and thermal cathode sputtering in an inert gas were studied. The nanomaterial's topography was studied by atomic-force microscopy. The possibility of using 3D nanocomposites as a biosolder for laser biowelding of cartilaginous tissue was shown. The compatibility of biological tissues with a nanocomposite material in vivo introduced under the perichondrium of ear cartilage of a rabbit was validated.

36 MATERIALS SCIENCE↗

Carrier transport in layered semiconductor (p-GaSe)-ferroelectric (KNO{sub 3}) composite nanostructures

The current-voltage characteristics and frequency dependences of the impedance of composite nanostructures fabricated on the basis of layered anisotropic semiconductor p-GaSe and ferroelectric KNO{sub 3} are studied. Multilayer nanostructures were obtained by introducing nanoscale pyramidal ferroelectric inclusions into a layered GaSe matrix. Hysteresis phenomena in current-voltage characteristics and abrupt changes in the conductance and capacitance in frequency dependences of the impedance are detected. These phenomena are associated with the collective effect of electric polarization switching in nanoscale 3D ferroelectric inclusions in the layered matrix, features of its local deformation, and polytype phase transitions in this matrix. X-ray, atomic-force microscopy, and impedance studies in a low (B < 400 mT) magnetic field show that the electrical characteristics of nanostructures are associated with the Maxwell-Wagner effect in nanostructures, the formation of quantum wells in GaSe during deformation of crystals in the region of nanoscale inclusion localization, and carrier tunneling in the structures.

36 MATERIALS SCIENCE↗

A novel approach to characterizing the surface topography of niobium superconducting radio frequency (SRF) accelerator cavities

As superconducting niobium radio-frequency (SRF) cavities approach fundamental material limits, there is increased interest in understanding the details of topographical influences on realized performance limitations. Micro- and nano-roughness are implicated in both direct geometrical field enhancements as well as complications of the composition of the 50 nm surface layer in which the super-currents typically flow. Interior surface chemical treatments such as buffered chemical polishing (BCP) and electropolishing (EP) used to remove mechanical damage leave surface topography, including pits and protrusions of varying sharpness. These may promote RF magnetic field entry, locally quenching superconductivity, so as to degrade cavity performance. A more incisive analysis of surface topography than the widely used average roughness is needed. In this study, a power spectral density (PSD) approach based on Fourier analysis of surface topography data acquired by both stylus profilometry and atomic force microscopy (AFM) is introduced to distinguish the scale-dependent smoothing effects, resulting in a novel qualitative and quantitative description of Nb surface topography. The topographical evolution of the Nb surface as a function of different steps of well-controlled EP is discussed. This study will greatly help to identify optimum EP parameter sets for controlled and reproducible surface levelling of Nb for cavity production.

43 PARTICLE ACCELERATORS↗

Ablation and plasma emission produced by dual femtosecond laser pulses

Pairs of 80 fs, 800 nm laser pulses were used to ablate Si, Cu, and CaF{sub 2} in air. The spectrally resolved plasma emission was measured as a function of laser fluence and pulse delay. After an initial dip, the fluorescence was found to increase monotonically with pulse delay, reaching a plateau after some tens of picoseconds, depending on the material and fluence. The enhancement ratio (defined as the ratio of the fluorescence produced by the pulse pair to that produced by a single pulse of the same total fluence) reaches a maximum value of 6 and 11 at a fluence of {approx}6 J/cm{sup 2} for Si and Cu, respectively, and declines to a value below 2 at higher fluences. In contrast, the enhancement for CaF{sub 2} increases slowly from zero near threshold to a broad maximum value of 2 near 50 J/cm{sup 2}. Using reflectivity and atomic force microscopy measurements as diagnostics, we interpret the Si and Cu behavior in terms of a two phase mechanism, in which the first pulse melts the surface of the crystal and the second pulse ablates the resulting liquid film. A qualitatively different mechanism initiated by multiphoton absorption is involved in CaF{sub 2} ablation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis of multiferroic Er-Fe-O thin films by atomic layer and chemical vapor deposition

R-Fe-O (R = rare earth) compounds have recently attracted high interest as potential new multiferroic materials. Here, we report a method based on the solid-state reaction between Er{sub 2}O{sub 3} and Fe layers, respectively grown by atomic layer deposition and chemical vapor deposition, to synthesize Er-Fe-O thin films. The reaction is induced by thermal annealing and evolution of the formed phases is followed by in situ grazing incidence X-ray diffraction. Dominant ErFeO{sub 3} and ErFe{sub 2}O{sub 4} phases develop following subsequent thermal annealing processes at 850 °C in air and N{sub 2}. Structural, chemical, and morphological characterization of the layers are conducted through X-ray diffraction and reflectivity, time-of-flight secondary ion-mass spectrometry, and atomic force microscopy. Magnetic properties are evaluated by magnetic force microscopy, conversion electron Mössbauer spectroscopy, and vibrating sample magnetometer, being consistent with the presence of the phases identified by X-ray diffraction. Our results constitute a first step toward the use of cost-effective chemical methods for the synthesis of this class of multiferroic thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Serrated flow behaviors of a Zr-based bulk metallic glass by nanoindentation

Instrumented nanoindentation tests were used to investigate the mechanical properties of Zr{sub 52.5}Cu{sub 17.9}Ni{sub 14.6}Al{sub 10}Ti{sub 5} bulk metallic glass. The corresponding loading strain rates were ranged from 0.002 s{sup −1}, 0.02 s{sup −1} to 0.2 s{sup −1}. Plastic flow of this material exhibited remarkable serrations at low strain rates and increasingly became weakening until disappearance with increasing indentation strain rate, implying strong rate sensitivity. A significant pile-up around the indents was observed through atomic force microscopy, which suggested a highly localized plastic deformation. Mechanism governing the deformation was tentatively discussed in terms of the increasing process of free volume with a negligible temperature rise under low strain rate, which well explained the declining trend of elastic modulus and hardness with an increase of indentation depth.

36 MATERIALS SCIENCE↗

Thickness and growth-condition dependence of in-situ mobility and carrier density of epitaxial thin-film Bi{sub 2}Se{sub 3}

Bismuth selenide Bi{sub 2}Se{sub 3} was grown by molecular beam epitaxy, while carrier density and mobility were measured directly in situ as a function of film thickness. Carrier density shows high interface n-doping (1.5 × 10{sup 13 }cm{sup −2}) at the onset of film conduction and bulk dopant density of ∼5 × 10{sup 11 }cm{sup −2} per quintuple-layer unit, roughly independent of growth temperature profile. Mobility depends more strongly on the growth temperature and is related to the crystalline quality of the samples quantified by ex-situ atomic force microscopy measurements. These results indicate that Bi{sub 2}Se{sub 3} as prepared by widely employed parameters is n-doped before exposure to atmosphere, the doping is largely interfacial in origin, and dopants are not the limiting disorder in present Bi{sub 2}Se{sub 3} films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modification of the Langmuir–Schaefer method for fabrication of ordered protein films

A modification of the Langmuir–Schaefer method for the fabrication of high-quality protein films on a solid substrate was proposed and applied to lysozyme. The procedure relies on the use of a pre-prepared protein solution, the parameters of which correspond to crystallization conditions. A lysozyme Langmuir monolayer was shown to be formed with the involvement of complexes, namely, dimers and octamers of protein molecules that are present in such protein solutions. These complexes apparently retain the structure after spreading a protein solution onto an aqueous subphase in a Langmuir trough. The thickness of the film after the transfer of the monolayer, which was formed by the proposed procedure, onto a solid substrate corresponds to the diameter of the octamer and this film is dense, continuous, and uniform, as was demonstrated by several methods: X-ray reflectivity, total external reflection X-ray standing wave, and atomic force microscopy. A layer of chloride ions that formed under the Langmuir monolayer was found at the air–protein film interface. This fact confirms an important role of the precipitating agent (chloride ions) in all steps of the formation of lysozyme films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗