Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud parameterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Mesospheric heating due to convectively excited gravity waves - A case study

A series of at least daily rocket soundings of the mesosphere at Wallops Island, Virginia (37 deg 50 min N, 75 deg 29 min W), in August and September 1976 reveal near simultaneity between rapid temperature rises and tropospheric convection in the form of squall lines. A multilevel numerical model is developed to test the hypothesis that the convection and warmings are related via internal gravity waves. Some features of the model are (1) the wave energy source is expressed in terms of cloud-base mass flux, plume diameter and buoyant updraft velocity; (2) the turbulent-viscous gravity wave dissipation is limited to above 55 km and is parameterized on the basis of findings by Hines (1965). Significant findings are: (1) mesospheric heating rates of the same order as those observed result for reasonable values of the convective parameters and in situ dissipation time scales; (2) only gravity waves confined to a well-defined wavelength and frequency interval are able to propagate upward to mesospheric altitudes; (3) heating rates are strongly dependent on plume diameter and updraft velocity; and (4) for a given cloud-base mass flux, heating rates are optimized for a plume updraft velocity of 10 m/s.

Clark, J. H. E.↗

A parameterization for the absorption of solar radiation in the earth's atmosphere

A method is described for rapidly computing the amount of solar energy absorbed at the earth's surface and in the atmosphere as a function of altitude. The method is a parametric treatment, but the form of the solution and the coefficients involved are based on accurate multiple-scattering computations. In this treatment the absorption varies with the amount and type of clouds, the humidity, the zenith angle of the sun, and the albedo of the earth's surface. Within the stratosphere the absorption also depends on the vertical distribution of ozone. This parameterization for solar radiation is being used in current versions of the global atmospheric circulation model developed at the Goddard Institute for Space Studies.

Lacis, A. A.↗

Sensitivity Study for Forecasting Variables of WRF-Solar Using a Tangent Linear Approach

Integrating solar generation in recent years has highlighted the need for improved accuracy in predicting solar power. Confidence in solar power forecasting can be achieved by designing an ensemble that provides reliable probabilistic information for solar radiation with reduced uncertainty and error. Ideally, ensemble members are created through the optimized perturbation of the initial conditions in numerical weather prediction (NWP) models. Tangent linear models are capable of efficiently investigating the sensitivity of solar radiation to model input parameters because they do not require individual perturbation of each variable. This sensitivity study using tangent linear models provide us the capability to identify the right variables to perturb in an ensemble prediction system. In this study, we developed tangent linear models for WRF-Solar modules that directly impact the computation of solar radiation and the simulation of cloud formation and dissipation including the Fast All-sky Model for Solar Applications (FARMS), the Noah land surface model (LSM), the Thompson microphysics, the Mello-Yamada-Nakanishi-Niino (MYNN) boundary layer parameterization, and the Deng scheme for a shallow-convection parameterization. A sensitivity analysis was conducted under various scenarios based on satellite observations and model simulations from the National Solar Radiation Data Base (NSRDB) and WRF-Solar, respectively. Critical forecasting variables that are highly sensitive to the forecasting of global horizontal irradiance (GHI), direct normal irradiance (DNI), cloud mixing ratio, cloud tendency, cloud fraction, and sensible and latent heat fluxes were determined using the relevant WRF-Solar module. This study will be used as a guidance on future research leading to high-quality probabilistic solar forecasting. In this presentation, we discuss the validation of tangent linear approach for WRF-Solar modules and illustrate how the sensitivity results are valuable in the improvement of probabilistic solar prediction.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Influence of explicit Phaeocystis parameterizations on the global distribution of marine dimethyl sulfide

Dimethyl sulfide (DMS) is a biogenic organosulfur compound which contributes strongly to marine aerosol mass and the determination of cloud condensation nuclei over the remote oceans. Since uncertainties in DMS flux to the atmosphere lead to large variations in climate forcing, the global DMS distribution has been the subject of increasingly complex dynamic simulations. DMS concentrations are directly controlled by marine ecosystems. Phaeocystis is a major DMS producer but is often omitted from global reduced sulfur mechanisms. Here we incorporate this phytoplankton group into the marine ecosystem-biogeochemical module of the Community Earth System Model. To examine its role in the ocean sulfur cycle, an earlier DMS model has been enhanced to include new knowledge gained over the last few years. Results from the baseline run show that simulated Phaeocystis biomass generally agrees with observations, with high concentrations near the Antarctic continent and between 50° and 60° north. Given the new explicit Phaeocystis representation, the DMS distribution shows significant improvements, especially regarding the amplitude and location of high-latitude peaks. The simulated global mean surface DMS value is 2.26 nM, comparable to an estimate of 2.34 nM from the latest climatology extrapolated based on observations. The total oceanic DMS source to the atmosphere is 20.4 Tg S/yr, on the low side of previous estimates. Comparisons with and without Phaeocystis show that the group dominates DMS distributions in temperate and cold waters, contributing 13% of the global flux. The proportion may increase as sea ice declines and should be considered in climate projections.

54 ENVIRONMENTAL SCIENCES↗

Solving Global Cirrus Cloud Top-of-the-Atmosphere Radiative Forcing from Satellite Lidar

We estimate top-of-the-atmosphere (TOA) cirrus cloud radiative forcing from satellite lidar observations. We describe the technical innovations necessary to conduct this experiment. Specifically, we highlight advances in broadband radiative transfer modeling, and the optical and physical parameterizations necessary to run them. We present two years of results, across two decades (2008 vs. 2018), highlighting seasonal and annual differences. The goal of this endeavor is to standardize mechanics for transitioning this work to operational Level 2 ground and satellite lidar products moving forward. However, the unique TOA forcing characteristics of cirrus clouds are also discussed, including specifically daytime characteristics than can oscillate between warming and cooling regionally.

James R Campbell↗

Effects of Pollen on Hydrometeors and Precipitation in a Convective System

Anemophilous (wind-driven) pollen is one type of primary biological aerosol particle, which can rupture under high humidity conditions and form smaller sub-pollen particles (SPPs). Both pollen and SPPs can reach the upper troposphere under convective conditions, acting as cloud condensation nuclei (CCN) and ice nucleating particles (INPs), thus influencing cloud formation and precipitation. However, the impacts of these biological aerosols on cold cloud formation and local climate remain unclear as there are large uncertainties on their emission flux and ice nucleating abilities. Here, we incorporate pollen emission and rupture processes in the Weather Research and Forecasting Model with Chemistry (WRF-Chem) simulations and update the Morrison microphysics scheme within WRF-Chem using aerosol-aware INP parameterizations to account for pollen in addition to other anthropogenic and biogenic aerosol. INP parameterizations for pollen and SPP are derived from laboratory experiments. When including pollen rupture rates as observed in a series of chamber studies, SPP concentrations increase, leading to an increase of cloud ice and water by up to 50% and potentially extending the duration of the convective system. Among all simulated hydrometeors, graupel and raindrops exhibit the largest enhancements from the inclusion of SPPs, with intensifying precipitation at the backside of the convective system and a greater spatial extent. Sensitivity simulations indicate that SPPs have a greater effect on cloud microphysical processes than whole pollen grains, and further observational evidence is needed to constrain these processes.

54 ENVIRONMENTAL SCIENCES↗

Designing a Convection‐Cloud Chamber for Collision‐Coalescence Using Large‐Eddy Simulation With Bin Microphysics

Abstract Collisional growth of cloud droplets is an essential yet uncertain process for drizzle and precipitation formation. To improve the quantitative understanding of this key component of cloud‐aerosol‐turbulence interactions, observational studies of collision‐coalescence in a controlled laboratory environment are needed. In an existing convection‐cloud chamber (the Pi Chamber), collisional growth is limited by low liquid water content and short droplet residence times. In this work, we use numerical simulations to explore various configurations of a convection‐cloud chamber that may intensify collision‐coalescence. We employ a large‐eddy simulation (LES) model with a size‐resolved (bin) cloud microphysics scheme to explore how cloud properties and the intensity of collision‐coalescence are affected by the chamber size and aspect ratio, surface roughness, side‐wall wetness, side‐wall temperature arrangement, and aerosol injection rate. Simulations without condensation and evaporation within the domain are first performed to explore the turbulence dynamics and wall fluxes. The LES wall fluxes are used to modify the Scalar Flux‐budget Model, which is then applied to demonstrate the need for non‐uniform side‐wall temperature (two side walls as warm as the bottom and the two others as cold as the top) to maintain high supersaturation in a tall chamber. The results of LES with full cloud microphysics reveal that collision‐coalescence is greatly enhanced by employing a taller chamber with saturated side walls, non‐uniform side‐wall temperature, and rough surfaces. For the conditions explored, although lowering the aerosol injection rate broadens the droplet size distribution, favoring collision‐coalescence, the reduced droplet number concentration decreases the frequency of collisions.

54 ENVIRONMENTAL SCIENCES↗

Improving Bulk Microphysics Schemes for Deep Convective Systems Using MC3E Data (Final Report)

The centerpiece of the accomplishments under this (and related) grants is the increased knowledge of the capabilities of cloud-resolving models of convective systems, and their associated microphysics, especially of the biases of those models and their microphysics parameterization. Dr. Varble's leadership has been focused especially on the careful comparison of advanced model results with equally advanced observations to uncover and elucidate model successes, but clearly uncovering instances of model biases, in a way that suggests ways of overcoming those biases, toward model improvement in the future. Even a glance at the titles of the papers below will reveal the central significance of these advances; if desired, however, this report can be expanded upon request to discuss these advances in greater detail.

54 ENVIRONMENTAL SCIENCES↗

Tropical Diabatic Heating and the Role of Convective Processes as Represented in Several Contemporary Climate Models

One of the most fundamental properties of the global heat balance is the net heat input into the tropical atmosphere that helps drive the planetary atmospheric circulation. Although broadly understood in terms of its gross structure and balance of source / sink terms, incorporation of the relevant processes in predictive models is still rather poor. The work reported here examines the tropical radiative and water cycle behavior as produced by four contemporary climate models. Among these are the NSIPP-2 (NASA Seasonal to Interannual Prediction Project) which uses the RAS convective parameterization; the FVCCM, a code using finite volume numerics and the CCM3.6 physics; FVCCM-MCRAS again having the finite volume numerics, but MCRAS convective parameterization and a different radiation treatment; and, finally, the NCEP GSM which uses the RAS. Using multi-decadal integrations with specified SSTs we examine the statistics of radiative / convective processes and associated energy transports, and then estimate model energy flux sensitivities to SST changes. In particular the behavior of the convective parameterizations is investigated. Additional model integrations are performed specifically to assess the importance representing convective inhibition in regulating convective cloud-top structure and moisture detrainment as well as controlling surface energy fluxes. To evaluate the results of these experiments, a number of satellite retrievals are used: TRMM retrievals of vertical reflectivity structure, rainfall rate, and inferred diabatic heating are analyzed to show both seasonal and interannual variations in vertical structure of latent heat release. Top-of-atmosphere radiative fluxes from ERBS and CERES are used to examine shortwave and longwave cloud forcing and to deduce required seasonal energy transports. Retrievals of cloud properties from ISCCP and water vapor variations from SSM/T-2 are also used to understand behavior of the humidity fields. These observations are supplemented with output form the DOE Reanalysis-2.

Robertson, Franklin R.↗

New, Improved Goddard Bulk-Microphysical Schemes for Studying Precipitation Processes in WRF

An improved bulk microphysical parameterization is implemented into the Weather Research and Forecasting ()VRF) model. This bulk microphysical scheme has three different options, 2ICE (cloud ice & snow), 3ICE-graupel (cloud ice, snow & graupel) and 3ICE-hail (cloud ice, snow & hail). High-resolution model simulations are conducted to examine the impact of microphysical schemes on two different weather events (a midlatitude linear convective system and an Atlantic hurricane). The results suggest that microphysics has a major impact on the organization and precipitation processes associated with a summer midlatitude convective line system. The Goddard 3ICE scheme with a cloud ice-snow-hail configuration agreed better with observations in terms of rainfall intensity and a narrow convective line than did simulations with a cloud ice-snow-graupel or cloud ice-snow (i.e., 2ICE) configuration. This is because the 3ICE-hail scheme includes dense ice precipitating (hail) particle with very fast fall speed (over 10 in For an Atlantic hurricane case, the Goddard microphysical schemes had no significant impact on the track forecast but did affect the intensity slightly. The improved Goddard schemes are also compared with WRF's three other 3ICE bulk microphysical schemes: WSM6, Purdue-Lin and Thompson. For the summer midlatitude convective line system, all of the schemes resulted in simulated precipitation events that were elongated in the southwest-northeast direction in qualitative agreement with the observed feature. However, the Goddard 3ICE scheme with the hail option and the Thompson scheme agree better with observations in terms of rainfall intensity, expect that the Goddard scheme simulated more heavy rainfall (over 48 mm/h). For the Atlantic hurricane case, none of the schemes had a significant impact on the track forecast; however, the simulated intensity using the Purdue-Lin scheme was much stronger than the other schemes. The vertical distributions of model simulated cloud species (i.e., snow) are quite sensitive to microphysical schemes, which is an important issue for future verification against satellite retrievals. Both the Purdue-Lin and WSM6 schemes simulated very little snow compared to the other schemes for both the midlatitude convective line and hurricane cases. Sensitivity tests are performed for these two WRF schemes to identify that snow productions could be increased by increasing the snow intercept, turning off the auto-conversion from snow to graupel and reducing the transfer processes from cloud-sized particles to precipitation-sized ice.

Tao, Wei-Kuo↗

Studying Precipitation Processes in WRF with Goddard Bulk Microphysics in Comparison with Other Microphysical Schemes

A Goddard bulk microphysical parameterization is implemented into the Weather Research and Forecasting (WRF) model. This bulk microphysical scheme has three different options, 2ICE (cloud ice & snow), 3ICE-graupel (cloud ice, snow & graupel) and 3ICE-hail (cloud ice, snow & hail). High-resolution model simulations are conducted to examine the impact of microphysical schemes on different weather events: a midlatitude linear convective system and an Atlantic hurricane. The results suggest that microphysics has a major impact on the organization and precipitation processes associated with a summer midlatitude convective line system. The Goddard 3ICE scheme with the cloud ice-snow-hail configuration agreed better with observations ill of rainfall intensity and having a narrow convective line than did simulations with the cloud ice-snow-graupel and cloud ice-snow (i.e., 2ICE) configurations. This is because the Goddard 3ICE-hail configuration has denser precipitating ice particles (hail) with very fast fall speeds (over 10 m/s) For an Atlantic hurricane case, the Goddard microphysical scheme (with 3ICE-hail, 3ICE-graupel and 2ICE configurations) had no significant impact on the track forecast but did affect the intensity slightly. The Goddard scheme is also compared with WRF's three other 3ICE bulk microphysical schemes: WSM6, Purdue-Lin and Thompson. For the summer midlatitude convective line system, all of the schemes resulted in simulated precipitation events that were elongated in southwest-northeast direction in qualitative agreement with the observed feature. However, the Goddard 3ICE-hail and Thompson schemes were closest to the observed rainfall intensities although the Goddard scheme simulated more heavy rainfall (over 48 mm/h). For the Atlantic hurricane case, none of the schemes had a significant impact on the track forecast; however, the simulated intensity using the Purdue-Lin scheme was much stronger than the other schemes. The vertical distributions of model-simulated cloud species (e.g., snow) are quite sensitive to the microphysical schemes, which is an issue for future verification against satellite retrievals. Both the Purdue-Lin and WSM6 schemes simulated very little snow compared to the other schemes for both the midlatitude convective line and hurricane case. Sensitivity tests with these two schemes showed that increasing the snow intercept, turning off the auto-conversion from snow to graupel, eliminating dry growth, and reducing the transfer processes from cloud-sized particles to precipitation-sized ice collectively resulted in a net increase in those schemes' snow amounts.

Tao, W.K.↗

On the Sensitivity of Atmospheric Ensembles to Cloud Microphysics in Long-Term Cloud-Resolving Model Simulations

Month-long large-scale forcing data from two field campaigns are used to drive a cloud-resolving model (CRM) and produce ensemble simulations of clouds and precipitation. Observational data are then used to evaluate the model results. To improve the model results, a new parameterization of the Bergeron process is proposed that incorporates the number concentration of ice nuclei (IN). Numerical simulations reveal that atmospheric ensembles are sensitive to IN concentration and ice crystal multiplication. Two- (2D) and three-dimensional (3D) simulations are carried out to address the sensitivity of atmospheric ensembles to model dimensionality. It is found that the ensembles with high IN concentration are more sensitive to dimensionality than those with low IN concentration. Both the analytic solutions of linear dry models and the CRM output show that there are more convective cores with stronger updrafts in 3D simulations than in 2D, which explains the differing sensitivity of the ensembles to dimensionality at different IN concentrations.

Zeng, Xiping↗

Aerosol effects on the anvil characteristics, cold pool forcing and stratiform-convective precipitation partitioning and latent heating of mesoscale convective systems

The overarching science goal of this project has been to assess the impacts of aerosols on mesoscale convective systems (MCSs). More specifically we have investigated the impacts of (a) aerosol types, (b) aerosol concentrations, and (c) the vertical and horizontal location of aerosols on the (1) anvil cloud characteristics and feedbacks; (2) total precipitation and the partitioning between convective and stratiform precipitation; (3) the vertical heating structure; (4) hydrometeor size distributions; and (5) the strength and intensity of the cold pools and updrafts. These have been achieved both through observational analyses and high-resolution cloud-resolving model simulations of three MCSs that were observed during the MC3E field campaign (25 April, 20 May and 23 May 2011). The primary findings of these research are the following: Condensation and deposition are the primary contributors to MCS latent warming, when compared to riming and nucleation processes. In terms of MCS latent cooling, sublimation, melting, and evaporation all play significant roles. Throughout the MCS lifecycle, convective regions demonstrate an approximately linear decrease in the magnitudes of latent heating rates, while latent heating within stratiform regions is associated with transitions between MCS flow regimes including the rear inflow jet. Such information regarding the temporal evolution of latent heating within convective and stratiform MCS regions could be useful in developing parameterizations representing convective organization. Increasing aerosol concentration from a clean continental to a highly polluted state produces an increase in the riming rates of cloud water, which results in less lofted cloud water in polluted environments. Aerosol-induced trends in the cloud mixing ratio profiles are, however, nonmonotonic in the mixed phase region, such that a moderate increase in aerosol concentration produces the greatest reduction in cloud water. Less lofted cloud water due to enhanced riming rates leads to reduced anvil ice mixing ratios but to greater numbers of small ice crystals within the anvil. In spite of reduced anvil ice mixing ratio, the anvil clouds exhibit greater areal coverage, increased albedo, reduced cloud top cooling, and reduced net radiative flux, which produces an aerosol-induced warming (reduced cooling) effect in these MCSs. Lower-tropospheric aerosol particles largely influence the MCS precipitation response directly rearward of the leading cold pool boundary. However, further backward in the MCS, the relative impact of lower- versus mid-tropospheric aerosol particles is strongly dependent on the MCS structure and differences in the line-normal wind shear. Mid-tropospheric aerosol particles are able to activate new cloud droplets in the mid-tropospheric levels of convective updrafts and thereby enhance mixed-phase precipitation through increased cloud riming.

54 ENVIRONMENTAL SCIENCES↗

A new spectrally-invariant approach to the remote sensing of inhomogeneous clouds

Current operational satellite retrievals of cloud optical and microphysical properties go back to the Nakajima-King technique developed at the end of the 1980s. This technique is based on library calculations for plane-parallel homogeneous clouds. It often works well for overcast skies but leads to substantial errors for inhomogeneous and broken cloud fields where the plane-parallel-geometry assumption is no longer valid. The basic concept of a new technique was first introduced in nuclear physics to quantify the critical conditions of reactors. Based on the eigenvalues of the radiative transfer equation, their approach provides a powerful means to parameterize the structure of 3D media. This parameterization was later successfully applied to relate surface reflectance spectra to 3D canopy structure and is known as the spectrally-invariant approximation. The proposed approach adapts this technique to the remote sensing of cloud properties such as droplet single scattering albedo and the average number of scatterings (which are the fundamental parameters in radiative transfer theory), with an emphasis on quantifying the associated errors and uncertainties. This retrieval is free from the plane-parallel homogeneous cloud assumption.

clouds↗

Numerical Errors in Ice Microphysics Parameterizations and their Effects on Simulated Regional Climate

The major characteristics of ice microphysics in Weather Research and Forecasting (WRF) Double-Moment 6-class (WDM6) bulk-type cloud microphysics originate from the diagnosed ice number concentration, which is a function of the cloud-ice mixing ratio. In this study, we correct numerical errors in ice microphysics processes of the WDM6, in which the cloud-ice shape is assumed as single bullets and examine the impact on regional climate simulations. Here, by rederiving the relationships between cloud microphysics characteristics, including the one linking the cloud-ice mixing ratio and number concentration, we remove numerical errors intrinsic to the description of cloud-ice characteristics in the original WDM6 microphysics scheme. The revised WDM6 is tested using a WRF framework for regional climate simulations over the East Asian region. We find that our correction to the WDM6 improves the model’s performance in capturing the observed distribution of the monsoon rain band. A reduction in cloud ice is significant in the revised WDM6, which strengthens the Western North Pacific High. By conducting the additional sensitivity experiment in which the characteristics of cloud-ice shape are revised as the one for the column type, our study also finds out that the impacts of the existing numerical errors on the simulated monsoon is as large as the ones of the changes in cloud-ice shape.

54 ENVIRONMENTAL SCIENCES↗

Cloud/Aerosol Parameterizations: Application and Improvement of General Circulation Models

One of the biggest uncertainties associated with climate models and climate forcing is the treatment of aerosols and their effects on clouds. The effect of aerosols on clouds can be divided into two components: The first indirect effect is the forcing associated with increases in droplet concentrations; the second indirect effect is the forcing associated with changes in liquid water path, cloud morphology, and cloud lifetime. Both are highly uncertain. This project applied a cloud-resolving model to understand the response of clouds under a variety of conditions to changes in aerosols. These responses are categorized according to the large-scale meteorological conditions that lead to the response. Meteorological conditions were sampled from various fields, which, together with a global aerosol model determination of the change in aerosols from present day to pre-industrial conditions, was used to determine a first order estimate of the response of global cloud fields to changes in aerosols. The response of the clouds in the NCAR CAM3 GCM coupled to our global aerosol model were tested by examining whether the response is similar to that of the cloud resolving model and methods for improving the representation of clouds and cloud/aerosol interactions were examined.

54 ENVIRONMENTAL SCIENCES↗

RACORO aerosol data processing

The RACORO aerosol data (cloud condensation nuclei (CCN), condensation nuclei (CN) and aerosol size distributions) need further processing to be useful for model evaluation (e.g., GCM droplet nucleation parameterizations) and other investigations. These tasks include: (1) Identification and flagging of 'splash' contaminated Twin Otter aerosol data. (2) Calculation of actual supersaturation (SS) values in the two CCN columns flown on the Twin Otter. (3) Interpolation of CCN spectra from SGP and Twin Otter to 0.2% SS. (4) Process data for spatial variability studies. (5) Provide calculated light scattering from measured aerosol size distributions. Below we first briefly describe the measurements and then describe the results of several data processing tasks that which have been completed, paving the way for the scientific analyses for which the campaign was designed. The end result of this research will be several aerosol data sets which can be used to achieve some of the goals of the RACORO mission including the enhanced understanding of cloud-aerosol interactions and improved cloud simulations in climate models.

54 ENVIRONMENTAL SCIENCES↗

LES ARM Symbiotic Simulation and Observation (LASSO) Implementation Strategy

This document illustrates the design of the Large-Eddy Simulation (LES) ARM Symbiotic Simulation and Observation (LASSO) workflow to provide a routine, high-resolution modeling capability to augment the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility’s high-density observations. LASSO will create a powerful new capability for furthering ARM’s mission to advance understanding of cloud, radiation, aerosol, and land-surface processes. The combined observational and modeling elements will enable a new level of scientific inquiry by connecting processes and context to observations and providing needed statistics for details that cannot be measured. The result will be improved process understanding that facilitates concomitant improvements in climate model parameterizations. The initial LASSO implementation will be for ARM’s Southern Great Plains site in Oklahoma and will focus on shallow convection, which is poorly simulated by climate models due in part to clouds’ typically small spatial scale compared to model grid spacing, and because the convection involves complicated interactions of microphysical and boundary layer processes.

Gustafson Jr., WI↗